streamplify V9 Table Mount Arm Instruction Manual

Streamplify V9 Table Mount Arm

WHAT IS IN THE BOX

INSTALLATION

• A: 1: Remove the stopper
• 2: Slide in cable guide 1
• 3: Slide in ball head
• 4: Slide in cable guide 2
• 5: Re-insert stopper
• 6: Place the cable into the cable guide
• B: Install either the 5/8″ or 1/4″ screw adaptor
• C: Adjust tightness with the hex key

For more information, visit our webpage at streamplify.com or scan this QR code

Pro Gamersware GmbH | Gaußstr. 1, 10589 Berlin, Germany info@streamplify.com