Power On: Connect the device to a power source
and switch it on using the designated power button.
Functionality: Explore the various functions
of the product and familiarize yourself with its features for
optimal usage.

Maintenance: Regularly clean and maintain the
product to ensure longevity and efficient performance.

Frequently Asked Questions (FAQ)

Q: Can the AD Plus2.0 be used outdoors?

A: The AD Plus2.0 is designed for indoor use only.

Q: How do I reset the device?

A: To reset the device, locate the reset button on the back
panel and hold it for 10 seconds until the device restarts.

“`

View Fullscreen

AD Plus2.0
Specifications

Specifications

AD Plus2.0

Preface

The Specifications describe the product components and parameter meaning of AD Plus2.0, and the contents involved like text, figures, and graphics belong to Shenzhen Streamax Technology Co., Ltd. No part of the Specifications may be extracted, reproduced, translated, or modified in any form or by any means without the prior written consent of Shenzhen Streamax Technology Co., Ltd. Unless otherwise specified, the Specifications are provided without representations or warranties of any kind.
About the Specifications: The Specifications are intended to provide guidance for authorized users and technical support personnel of the product. The product pictures and screen contents provided herein are for illustration only. The physical product (including but not limited to its appearance, color, and size) may differ from the displayed contents (including but not limited to the background, UIs, and pictures). Please refer to the physical product. The figures contained herein are theoretical values obtained from the internal laboratory of Streamax Technology in a specific test environment (refer to the specific instructions). These figures may vary slightly in actual use due to the individual product differences, software version, service condition, and environmental factors. With the real-time changes in product batches and production-supply factors, in order to provide product information, features, specifications, and parameters as accurate as possible, Streamax may adjust and modify the text, pictures, and other contents in the Specifications from time to time to match with the actual performance, specification, indexes, components, and other information of the product. Such changes and necessary adjustments may be made without special notice. Trademark Statement:
is the registered trademark of Streamax Technology. All other trademarks mentioned in this Specifications are the property of their respective holders.
Responsibility Statement: To the maximum extent permitted by applicable law, the products described in this Specifications (including their hardware, software, firmware, etc.) are provided

Specifications

AD Plus2.0

“AS Available” with possible flaws, errors, or faults. Streamax makes no warranties, express or

implied, including but not limited to merchantability, quality satisfaction, fitness for particular

purposes, or no infringement on the rights of third parties. The use of the Specifications or products

of Streamax is at your own risk. In no event will Streamax be liable to you for any special,

consequential, incidental, or indirect damages, including but not limited to damages for loss of

business profits, or loss of data or documentation, in connection with such use.

You acknowledge that the nature of the Internet provides for inherent security risks, and

Streamax shall not take any responsibilities for abnormal operation, data leakage, or other damages

resulting from cyber-attack, hacker attack, virus infection, or other Internet security risks; however,

Streamax will provide timely technical support if required.

You agree to use this product in compliance with all applicable laws. Streamax shall not take any

responsibility for the product being used to infringe on the rights of a third party or for other

improper purposes.

In the event of any conflicts between the Specifications and the applicable laws, the latter

prevails.

Read the Specifications before using the product, to ensure that you will use the product correctly and all necessary functions will work properly.

Warning: conditions that may involve the safety of the device user or injure the device user
Important: conditions that may damage data integrity or firmware or hardware of the device

Note: additional descriptions, explanations of terms, etc.

Specifications

Contents

AD Plus2.0

1. PRODUCT INTRODUCTION …………………………………………………………………………………………………………………… 1

2. FUNCTIONS AND FEATURES ………………………………………………………………………………………………………………… 1

2.1 AI FUNCTION ………………………………………………………………………………………………………………………………………………………………2 2.1.1 ADAS FUNCTIONS……………………………………………………………………………………………………………………………………………..2 2.1.2 DSC FUNCTIONS………………………………………………………………………………………………………………………………………………..2 2.1.3 DMS FUNCTIONS (OPTIONAL) …………………………………………………………………………………………………………………………..3

3. SPECIFICATIONS ………………………………………………………………………………………………………………………………………3

4. DIMENSIONAL DRAWINGS (UNIT: MM) …………………………………………………………………………………………… 10

5. SYSTEM CONNECTION DIAGRAM ……………………………………………………………………………………………………. 10

5.1 CONNECTION DIAGRAM OF ACC POWER SUPPLY SYSTEM ………………………………………………………………………………..11 5.2 CONNECTION DIAGRAM OF OBD POWER SUPPLY SYSTEM………………………………………………………………………………. 11 5.3 CABLE CONNECTOR PINOUTS …………………………………………………………………………………………………………………………………11
5.3.1 POWER SUPPLY BOX CONNECTOR PINOUT………………………………………………………………………………………………….. 12 5.3.2 STANDARD POWER CABLE CONNECTOR PINOUT…………………………………………………………………………………………..12 5.3.3 OBD POWER CABLE CONNECTOR PINOUT………………………………………………………………………………………………….. 13 5.3.4 VIDEO OUTPUT CABLE CONNECTOR PINOUT……………………………………………………………………………………………….13

6. NOTICE …………………………………………………………………………………………………………………………………………………….. 14

Specifications

Abbreviations Explanation

Abbr.

Full Name

1920P

Resolution ratio 2560×1920

ADAS

Advanced Driving Assistance System

DSC

Driving Safety Cockpit

DMS

Driver Monitoring System

VBR

Variable Bit Rate

CBR

Constants Bit Rate

LDW

Lane Departure Warning

HMW

Headway Monitoring Warning

FCW

Forward Collision Warning

AD Plus2.0

Specifications

AD Plus2.0

1. Product Introduction

AD Plus2.0 is an AI dashcam that helps drivers to reduce traffic accidents and facilitates fleets to improve management efficiency. Based on AI technology, it can actively detect risky driving events and unsafe driving behaviors, supporting sending local real-time reminders to the driver to avoid risks and uploading events to the fleet management platform for driver training. It transmits real-time and accurate vehicle position information and operation data to the fleet management platform. It provides high-quality remote intercom and video live view playback to make the fleet management easier and more efficient.

2. Functions and Features

Ultra-wide 140° DFOV road facing lens, supporting up to 1920P QHD video recording Ultra-wide 170° DFOV driver facing lens, supporting up to 1080P HD video recording Support up to 4-channel video recording H.264/H.265 encoding 2 512GB dual-Micro SD card storage, supporting the simultaneous storage of main
streams and sub streams Built-in Wi-Fi, 4G communication module, and inertial navigation positioning module AES256 encryption for video/audio data, encryption protocol TLS1.3 for data
transmission 4-channel IO input, 1-channel CAN and 1-channel RS232 Compact design, not affecting the driver’s sight regardless of vehicle size OBD power supply, easy installation Built-in ADAS function, supporting lane departure warning (LDW), forward collision
warning (FCW), and headway monitoring warning (HMW) Built-in DSC function, supporting the detection of unsafe driving behaviors

https://en.streamax.com/

Specifications

AD Plus2.0

Support echo & noise canceling algorithm to improve the quality of two-way audio

communication

Sleep mode, remote wakeup

Built-in 6-axis gravity sensor, supporting rapid acceleration, rapid deceleration, harsh

cornering, and accident detection

supports expansion of OBD data reading and expansion of video channels and AI

capabilities by replacing the standard power box with Power Box Plus or Power Box Max

2.1 AI Function

AD Plus2.0 uses machine vision based on video analysis technology to automatically identify road risks and drivers’ unsafe driving behaviors. Any detected event will trigger audible and visual reminders to remind drivers in real time, and the event videos can also be uploaded to the cloud.

Warning: AI function must be calibrated and configured in strict accordance with the installation and operation instructions, otherwise, the AI function cannot work properly.
2.1.1 ADAS functions

LDW 2.1.2 DSC functions

HMW

FCW

Lens Covered
All rights reserved.
Page 2 of 14

Yawning

Handheld Devices

Smoking
https://en.streamax.com/

Specifications

AD Plus2.0

Distraction

No Driver

2.1.3 DMS functions (optional)

Unfasten seat belt

DMS

Driver prompter (R-Watch)

Lens Covered

Yawning

Handheld Devices

Smoking

Distraction

No driver

Unfastened seat belt

Fatigue driving

3. Specifications

Product model: AD Plus2.0

System

Embedded Linux

Language

Options: Chinese, English, Spanish (Latin American), Portuguese (Latin American), French, Russian and Japanese. Default: English.

https://en.streamax.com/

Specifications

AD Plus2.0

* The language includes interface language and voice reminder. TTS supports

Chinese and English only.

Video/Audio

Video/Audio Recording

4-channel video (default: 2 channels; extension: 2 channels) + 1-channel audio

Max. Capability (with 2-channel AI)

1920P@25fps (ADAS)+1080P@25fps (DSC)+1080P@25fps (AHD) +800P@20fps (DMS) Recommended configuration (1920P@20fps+1080P@15fps+1080P@20fps (AHD) +800P@20fps (IPC))

Image Setup Adjustable brightness, chroma, contrast, color saturation, and sharpness

Video Coding Options: H.264 and H.265. Default: H.265

Audio

Compression Options: ADPCM, G.711, and G.726. Default: ADPCM

Standard

CBR/VBR

Options: VBR and CBR. Default: VBR

Audio

Built-in MIC

Loudspeaker

Built-in speaker, power: 3W, with adjustable volume, not less than 70 dB at 1 m distance

Parameters of road facing lens

Sensor Type 1/2.7″ 5-megapixel CMOS sensor

Shutter Speed 1/30s~1/100000s

Focal length: 2.8 mm Lens
HFOV: 123°; VFOV: 65°; DFOV: 140°; Deviation: ±5°

Minimum Illuminance

Color: 0.05 Lux/F1.2

Lens Mount

built-in lens

Wide Dynamic Digital WDR

https://en.streamax.com/

Specifications

Range (WDR)

Backlight Compensation

Supported

Signal-to-Noise 48dB
Ratio (S/N)

AD Plus2.0

Parameters of driver facing lens

Sensor Type 1/2.9″ 2-megapixel CMOS sensor

Shutter Speed 1/30s~1/100000s

Focal length: 2.2 mm Lens
HFOV: 151°; VFOV: 84°; DFOV: 170°; Deviation: ±5°

Lens Mount

Built-in lens

Wide Dynamic Digital WDR
Range (WDR)

Backlight Compensation

Supported

Signal-to-Noise 45db
Ratio (S/N)

Supported. The built-in environmental light sensor turns on/off the lamp

automatically

Infrared Lamp * Threshold: 4 lux from daytime to night, and 8 lux from night to daytime.

There may be some deviations for different devices. Please refer to the actual

measurements.

LED Indicator Status

Power Status Lights

Off/Green Off: The device is not powered on Steady green: The device is powered normally

Alarm Indicator

Off/Red

https://en.streamax.com/

Specifications

Off: The device does not generate any alarm Red flashes three times: The device generates an alarm

AD Plus2.0

Off/Red

GPS Signal Indicator

Off: The device positioning runs normally Steady red: The device positioning runs abnormally (not positioned, or module not connected or damaged) Red flash (once per second): The device positioning is poor

Off/Red

Off: The device is connected to the server normally

Network Status Steady red: The device is connected to the server abnormally

Indicator

Red flash (once per second): The device is in airplane mode

* Airplane mode: Turning off the network signal of the dashcam to ensure

safety when the vehicle enters the gas station.

Off/Red/Green

Wi-Fi Status Off: The device is in Disable or Client mode

Indicator

Steady green: The device is in AP mode

Steady red: The device Wi-Fi runs abnormally

Off/Red

Off: The built-in or extended camera runs normally

Steady red: The built-in or extended camera stops (including privacy

Recording

mode)/fails

Status Indicator * When the video recording function is enabled (main stream and sub stream),

the prompt will be given if no recording is detected. If the video recording

function is disabled (main stream and sub stream), it will be regarded as normal

recording status.

Storage

Micro SD card Micro SD card×2, (SDXC 32GB/64GB/128GB/256GB/512GB)

https://en.streamax.com/

Specifications

AD Plus2.0

Read/write rate: Class10 or above is recommended

Sensor

Six-axis Sensor Harsh acceleration, Harsh deceleration, Harsh cornering, and accident detection

Environmental Supported, used as the cockpit camera, subject to day/night switching

Light Sensor

Port

RS232

1-channel

I/O Port

4-channel input

1-channel (standard J1939 protocol)

CAN
USB Button Network Wi-Fi
4G

Warning: As some data fields may be customized by automobile manufacturers, the final measured data shall prevail. In the event that any required data is not supported, the integrated development is acceptable based on a specific protocol. 1 × mini USB port 1 To switch Wi-Fi to AP mode, press the button twice within 2s. * For details of other buttons, refer to the user manual of the product.
Support 2.4G (IEEE Std.802.11a/IEEE Std.802.11b/IEEE Std.802.11g /IEEE Std.802.11n) Plug-in SIM card (Nano SIM card), V1.1 version reserved eSIM patch position, can support pre-burn-in eSIM. For North America: LTE FDD: B2/B4/B5/B12/B13/B14/B66/B71 WCDMA: B2/B4/B5 For Europe and Asia:

https://en.streamax.com/

Specifications

LTE FDD: B1/B3/B7/B8/B20/B28A WCDMA: B1/B8 GSM: B3/B8 For Latin America: LTE FDD: B1/B2/B3/B4/B5/B7/B8/B28 LTE TDD: B40 WCDMA: B1/B2/B5/B8 GSM: B2/B3/B5/B8

AD Plus2.0

Warning: The industrial SIM card (MP2) is required, and the ordinary

SIM card (MP1) is prohibited. We are not responsible for any problem caused by the use of any ordinary SIM card.

Positioning GNSS

Supported GPS L1 1575.42MHz GALILEO E1B/C1 GLONASS L1OF 1602MHz SBAS: WAAS, EGNOS, MSAS, GAGAN

Power Related

Power supply
Power consumption

12V and 24V vehicles (self-adaptive) In standby mode:13.5V@5.67mA, 27V@3.39mA In sleep mode (4G and MCU powered):13.5V@62~124mA,
27V@32~61mA Typical power consumption (with dual SD cards installed and SIM card for
dialing): about 7.56W Full-load power consumption (with dual SD cards installed, SIM card for
dialing, Wi-Fi turned on, IPC and AHD connected, and infrared lamp

https://en.streamax.com/

Specifications

AD Plus2.0

turned on): about 12.66W

* The above data are test data obtained in a specific environment in the

laboratory, and may vary with the individual product differences, service

environment, and testing methods.

Environment

Operating Temperature

-40°C ~ +70°C (-40°F ~ +158°F)

Storage Temperature

-40°C ~ +85°C (-40°F ~ +185°F)

Operating Humidity

15~95% non-condensing

Storage Humidity

15~95% non-condensing

IP Rating

IP30 * The Dashcam is non-waterproof

Dimensions and Weight

Dimensions L×W×H

Dashcam: 116.5 mm×67.8 mm×88.2 mm (excluding bracket); Deviation: ±2 mm Package: 176 mm×150 mm×114 mm; Deviation: ±3 mm

Net weight (device only): 315g

Weight

Gross weight (including accessories and package): 734.5g

Deviation: ±10g

* The actual dimensions and weight may vary with the individual product differences,

manufacturing processes, and testing methods.

Package Contents

AD Plus2.0 ×1, power supply box ×1, standard power cable ×1, Allen key ×1, mounting bracket

×1, bracket bolt ×1, crowbar ×1, desiccant ×1, and alcohol cotton×1

https://en.streamax.com/

Specifications
* The configuration may vary in different regions.
4. Dimensional Drawings (Unit: mm)

AD Plus2.0

Left view

Front view

Right view

Rear view

5. System Connection Diagram

The standard packing list contains a standard power cable that supports ACC power supply and vehicle connection. You can select OBD power cable which support OBD power supply and vehicle connection.

https://en.streamax.com/

Specifications
5.1 Connection Diagram of ACC Power Supply System

AD Plus2.0

5.2 Connection Diagram of OBD Power Supply System

https://en.streamax.com/

Specifications
5.3.1 Power Supply Box Connector Pinout

AD Plus2.0

5.3.2 Standard Power Cable Connector Pinout

https://en.streamax.com/

Specifications
5.3.3 OBD Power Cable Connector Pinout

AD Plus2.0

5.3.4 Video Output Cable Connector Pinout

https://en.streamax.com/

Specifications
6. Notice

AD Plus2.0

1) The product needs to be installed by professionals, otherwise, there may be a risk of electric shock, damage to vehicle lines, impact on AI experience and device falling-off.
2) The surface temperature may exceed 60°C when the product is in use under direct sunlight. Please do not touch the surface exposed to direct sunlight to avoid burns.
3) The extended AHD channel does not support audio input. 4) The extended screen output does not support audio, and does not support IPC channel
screen preview.

FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

https://en.streamax.com/

Documents / Resources

Streamax AD Plus2.0 Streamax Camera [pdf] Instruction Manual
ADP211, 2AM6L-ADP211, 2AM6LADP211, AD Plus2.0 Streamax Camera, AD Plus2.0, Streamax Camera, Camera

References

User Manual

AD Plus2.0 Streamax Camera Instruction Manual

AD Plus2.0 Streamax Camera

Specifications

Product Introduction

Functions and Features

Specifications

Dimensional Drawings

Product Usage Instructions

Frequently Asked Questions (FAQ)

Q: Can the AD Plus2.0 be used outdoors?

Q: How do I reset the device?

Documents / Resources

References

Leave a comment

Cancel reply