STIHL RG-KM Multi Task Tools Instruction Manual

Safety Precautions
- Read the instruction manual carefully before use.
- Wear safety glasses, hearing protection, safety boots, and protective gloves.
- Avoid touching the moving blades and hot surfaces.
- Maintain a safe distance of 5 meters (17 ft).

Assembly and Setup
- Attach the KombiTool to the KombiMotor by connecting the drive tube.
- Secure the rider plate using the provided screw.
- Mount the blades securely onto the blade mounting.
- Insert the KombiTool into the KombiMotor until it reaches the mark for proper depth.
Operation
- Start the KombiMotor according to the instructions in its manual.
- Hold the KombiTool securely and at a comfortable angle for cutting weeds and grass.
- Avoid obstacles and uneven terrain to prevent accidents.
- Regularly check the blades for wear and tear and replace if necessary.

FAQs

Q: What should I do if the blades become dull?
- A: If the blades become dull, they should be sharpened or replaced with new ones following the instructions provided in the manual.

Q: Can I use the KombiTool for cutting tree branches?
- A: No, the KombiTool is designed specifically for removing weeds and mowing grass. Using it for cutting tree branches can result in damage to the tool and potential hazards. It is important to use the tool only for its intended purpose.

“`

View Fullscreen

RG-KM

2 – 15

Introduction

Dear Customer,
Thank you for choosing STIHL. We develop and manufacture our quality products to meet our customers’ requirements. The products are designed for reliability even under extreme con- ditions.
STIHL also stands for premium service quality. Our dealers guarantee competent advice and instruction as well as comprehensive service support.
STIHL expressly commit themselves to a sus- tainable and responsible handling of natural resources. This user manual is intended to help you use your STIHL product safely and in an environmentally friendly manner over a long service life.
We thank you for your confidence in us and hope you will enjoy working with your STIHL product.
Dr. Nikolas Stihl
IMPORTANT! READ BEFORE USING AND KEEP IN A SAFE PLACE FOR REFERENCE.
2

Guide to Using this Manual

2.1 Applicable Documentation
Local safety regulations apply. Read, understand and save the following
documents in addition to this instruction man- ual: Instruction manual of STIHL KombiTool
being used.
2.2 Symbols used with warnings in the text

WARNING
This symbol indicates dangers that can cause serious injuries or death. The measures indicated can avoid serious injuries or death.

NOTICE
This symbol indicates dangers that can cause damage to property. The measures indicated can avoid damage to property.

2.3 Symbols in Text
This symbol refers to a chapter in this instruction manual.

Overview

3.1 KombiTool

35 6
7

8 11

0000-GXX-8731-A1

1 Machine Support For resting KombiTool on the ground.
2 Blades Cut weeds and grass.
3 Rider Plate Covers the blade mounting.
4 Protective cap Covers the end of the drive tube.
5 Mark Defines the depth the KombiTool must be inserted in the KombiMotor.
0458-811-0121-C

Printed on chlorine-free paper Paper is recyclable.

Translation of Original Instruction Manual 0000008769_009_GB

Safety Precautions

6 Drive Tube Connects KombiTool to KombiMotor
7 Screw Secures rider plate to KombiTool.
8 Transport Guard Helps protect user from contact with blades.
9 Blade Mounting Serves to secure the blades.
10 Encloses the gearbox. 11 Screw Plug
Closes filler opening for STIHL gear grease.
3.2 Symbols
Meanings of symbols that may be on the Kombi- Tool:
This symbol marks the filler opening for STIHL gear grease. XXXXX Push drive tube into KombiTool’s cou- pling sleeve as far as mark.

4 Safety Precautions
4.1 Warning Symbols
Meanings of warning symbols on the KombiTool: Observe safety notices and take the necessary precautions.
Read, understand and save the instruction manual.
Wear safety glasses and hearing pro- tection.
Wear safety boots.

Wear protective gloves.

Do not touch the moving blades.

5 m (17 ft)

Maintain safe distance.

Do not touch hot surface.

English

4.2 Intended Use
The STIHL RGKM KombiTool is designed to be combined with a STIHL KombiMotor and used for removing weeds and mowing grass.
WARNING
Using the KombiTool for purposes for which it is not designed may result in serious or fatal injuries and damage to property. Use the KombiTool as described in this instruction manual. Use the KombiMotor as described in the instruction manual supplied with the STIHL KombiMotor.
4.3 The Operator
WARNING
Users who have had no instruction cannot rec- ognize or assess the risks involved in using the KombiTool. The user or other persons may sustain serious or fatal injuries. Read, understand and save the instruction manual.
If you pass the KombiTool on to another person: Always give them the instruction manual.
Make sure the user meets the following requirements: The user must be rested. The user must be in good physical con- dition and mental health to operate and work with the KombiTool. If the user’s physical, sensory or mental ability is restricted, he or she may work only under the supervision of or as instructed by a responsible person. The user is able to recognize and assess the risks involved in using the KombiTool. The user must be of legal age or is being trained in a trade under supervi- sion in accordance with national rules and regulations. The user has received instruction from a STIHL servicing dealer or other experi- enced user before working with the KombiTool for the first time.

0458-811-0121-C

English

4 Safety Precautions

The user must not be under the influ- ence of alcohol, medication or drugs.
If you have any queries: Contact a STIHL servicing dealer for assistance.
4.4 Clothing and equipment
WARNING
Objects can be thrown at high speed during operation. This may result in injury to the user. Wear close-fitting safety glasses. Suitable safety glasses are tested in accordance with EN 166 or national regulations and available commer- cially with the corresponding mark- ing. Wear long trousers made from resistant material.
Noise is generated during operation. Noise can damage your hearing. Wear ear protection.
Dust can be whipped up during operation: Whipped up dust can damage the respiratory passages and cause allergic reactions. If dust is whipped up or forms a cloud: Wear a dust respirator mask.
Unsuitable clothing can snag on wood, brush or the KombiTool. Users not wearing suitable clothing are at risk of serious injury. Wear close-fitting clothing. Remove scarves and jewelry.
The user can come into contact with the blades during operation. This may result in serious injury to the user. Wear steel-toed safety boots.
Wear long trousers made from resistant material.
The user can come into contact with the blades during cleaning and maintenance work. This may result in injury to the user. Wear work gloves made from resist- ant material.

4.5 Work Area and Surroundings

WARNING

Innocent bystanders, children and animals are

not aware of the dangers of the KombiTool or

flying debris. Bystanders, children and animals

may be seriously injured and damage to prop-

erty may occur.

5 m (17 ft)

Do not allow bystanders, children or animals within 5 meters of the work area.

Maintain a clearance of 3 meters from

objects.

Do not leave the KombiTool unattended.

Make sure that children cannot play with

the KombiTool.

4.6 Safe Condition

4.6.1 KombiTool The KombiTool is in a safe condition if the follow- ing points are observed: The KombiTool is not damaged. The KombiTool is clean. The KombiTool is correctly mounted. Original STIHL accessories for this KombiTool
model are fitted. The accessories are correctly attached.
WARNING
If not in safe condition, components may no longer operate correctly and safety devices may be disabled. This may result in serous or fatal injury to people. Work only with an undamaged KombiTool. If the KombiTool is dirty: Clean the Kombi- Tool. Do not modify the KombiTool. Fit original STIHL accessories designed for this KombiTool model. Fit the blade as described in this Instruction Manual. Attach accessories as described in this User Manual or in the User Manual for the accessories. Replace worn or damaged labels. If you have any doubts, be sure to consult a STIHL dealer.

Wearing unsuitable footwear may cause the user to slip. This may result in injury to the user. Wear sturdy, closed-toed footwear with high-grip soles.

4.6.2 Blades The blades are in a safe condition if the following points are observed: The blades and mounting hardware are
undamaged. The blades are not deformed. The blades are properly mounted.

0458-811-0121-C

4 Safety Precautions

English

The blades are burr-free.
WARNING
If they are in an unsafe condition, parts of the blades may come off and be thrown at high speed. This can result in serious injuries. Never work with damaged blades or dam- aged mounting hardware. Sharpen the blades properly. Deburr the cutting edges with a file. If you have any queries: Contact a STIHL servicing dealer for assistance.
4.7 Operation
WARNING
The user cannot concentrate on the work in certain situations. The user may stumble, fall and be seriously injured. Work calmly and carefully. If light and visibility are poor: Do not work with the KombiTool. Operate the KombiTool alone. Keep the KombiTool close to the ground. Watch out for obstacles. Stand on the ground while working and keep a good balance. If you begin to feel tired: Take a break.
The moving blades can cut the user. This can result in serious injuries. Do not touch the moving blades. If the blades are blocked by an object: Switch off the KombiMotor. Then remove the object causing the blockage.
If the behavior of the KombiTool changes dur- ing operation or feels unusual, it may no lon- ger be in a safe condition. This can result in serious injuries and damage to property. Stop work and contact your STIHL dealer for assistance.
KombiTool vibrations may occur during opera- tion. Wear gloves.
Take regular breaks. If signs of circulation problems occur: Seek
medical advice. Sparks may occur if the rotating blades make
contact with a hard object. Sparks may cause a fire in an easily combustible location. This can result in serious or fatal injuries and dam- age to property.

Do not work in an easily combustible loca- tion.
There is an increased risk of objects being thrown if cutting performance deteriorates or cuttings frequently become jammed. This can result in personal injury. Sharpen the blades as described in the instruction manual.
Note that the blades continue to move for a few seconds after you let go of the throttle on the KombiMotor. This can result in serious injuries. Wait until the blades come to a complete standstill.
DANGER
Working near live electric cables can result in accidental contact with the blades and dam- age the cables. This can result in serious or fatal injuries. Do not work near live electric cables. Also watch out for buried cables.
4.8 Transporting
WARNING
The gear housing can get hot during opera- tion. There is a risk of burn injuries. Do not touch a hot gear housing.
The KombiTool can turn over or move while being transported. This may result in personal injuries and damage to property. Fit the transport guard. Secure the KombiTool with lashing straps, belts or a net to prevent it turning over and moving.
4.9 Storing
WARNING
Children are not aware of and cannot assess the dangers of the KombiTool and can be seri- ously injured. Fit the transport guard. Store KombiTool out of the reach of chil- dren.
The metal parts of the KombiTool can corrode if they are damp. The KombiTool may be dam- aged. Store the KombiTool in a clean and dry condition.

0458-811-0121-C

English

Preparing KombiTool for Operation

4.10 Cleaning, Maintenance and Repair
WARNING
The gear housing can get hot during opera- tion. There is a risk of burn injuries. Do not touch a hot gear housing.

If you are using a KombiMotor with a loop han- dle: Mount a barrier bar as described in the KombiMotor’s instruction manual.
Use a carrying system, 8.1. If you cannot carry out the above steps: Do
not use the KombiTool and contact your STIHL servicing dealer for assistance.
6 Assembling the KombiTool

Harsh detergents, cleaning with a water jet or sharp objects can damage the KombiTool. If the KombiTool is not cleaned correctly, com- ponents may no longer function properly or safety devices may be rendered inoperative. They may cause serious injury to persons. Clean the KombiTool as described in this instruction manual.
If the KombiTool is not serviced or repaired correctly, components may no longer function properly or safety devices may be rendered inoperative. This may result in serous or fatal injury to people. Do not attempt to repair the KombiTool yourself. If the KombiTool needs to be repaired: Con- tact a STIHL servicing dealer for assis- tance. Maintain the KombiTool as described in this instruction manual.
The user can be cut by the sharp cutting edges while cleaning or maintaining the blades. This may result in injury to the user.
Wear work gloves made from resist- ant material.

6.1 Connecting Drive Tube to Gear Housing

2 45
2

0000-GXX-8735-A1

6 1
Remove protective caps (1) from both ends of the drive tube (2).
Loosen the screw (6). Push the drive tube (2) into the gear housing
(5) and rotate it until the gear shaft (4) engages. Tighten the screw (6) moderately. Align the drive tube (2) so that the lug (3) faces up. Tighten down the screw (6) firmly.
The drive tube need not be removed again.
6.2 Mounting and Removing the KombiTool

5 Preparing KombiTool for

6.2.1 Mounting the KombiTool

Operation
5.1 Preparing KombiTool for Oper-

2 3 4 5

2 6

ation

0000-GXX-4689-A0

Perform the following steps before starting work: Make sure the following components are in a
safe condition: KombiTool, 4.6.1. KombiMotor, as described in the instruction
manual. Clean the KombiTool, 12.1. Connect drive tube to the gearbox, 6.1. Mount the KombiTool on the KombiMotor,
6.2.1.

Loosen the wing screw (1). Line up the lug (4) and the slot (3). Push the drive tube (5) into the coupling
sleeve (2) as far as stop. The red line (6) is flush with the coupling sleeve (2). Tighten down the wing screw (1) firmly.

0458-811-0121-C

Checking the KombiTool

6.2.2 Removing the KombiTool Fit the transport guard. Loosen the wing screw on the KombiTool. Pull the drive tube out of the KombiTool.
7 Checking the KombiTool
7.1 Checking the Blades
Switch off the KombiMotor.

KombiMotor with loop handle.

English

0000-GXX-4644-A0

a c
b
Measure the following points on the blades: Length a Width b Angle c
Compare measurements, 15.2. If the minimum length is less than specified:
Offset the blades, 13.4. If the minimum width is less than specified:
Replace the blades, 13.3. If the filing angle is not correct: Sharpen the
blades, 13.5. If you have any queries: Contact a STIHL
servicing dealer for assistance.

Using the KombiTool

8.1 Holding and Controlling the KombiTool
1
2

0000-GXX-8740-A0

Hold the KombiMotor with your right hand on the control handle wrap your thumb around the control handle.
Hold the KombiMotor with your left hand on the loop handle wrap your thumb around the loop handle.
KombiMotor with bike handle
Hold the KombiMotor with your right hand on the control handle wrap your thumb around the control handle.
Hold the KombiMotor with your the left hand on the handle wrap your thumb around the handle.
8.2 Weeding and Mowing Grass
The cutting height is determined by the distance of the blades from the ground.

0000-GXX-7850-A0

0000-GXX-7807-A0

0000-GXX-8737-A0

Hook the KombiMotor’s carrying ring (2) to the carrying system’s carabiner (1).
0458-811-0121-C

Swing the KombiTool back and forth in an arc. Walk slowly and steadily forwards.

After Finishing Work

9.1 After Finishing Work
Switch off the KombiMotor.
7

English
If the KombiTool is wet: Allow KombiTool to dry.
Clean the KombiTool. Fit the transport guard.

Transporting

10.1 Transporting the KombiTool
Switching the KombiEngine Off. Fit the transport guard.
Carrying the KombiTool Carry the KombiTook with one hand on the
drive tube.
Transporting the KombiTool in a vehicle Secure the KombiTool to prevent turnover and
movement.
11 Storing
11.1 Storing the KombiTool
Switch the KombiEngine off. Attach the transport guard. Check the following points when storing the
KombiTool: The KombiTool cannot tip over and cannot
shift. The KombiTool is out of the reach of chil-
dren. The KombiTool is clean and dry.
12 Cleaning
12.1 Cleaning the KombiTool
Switch off the KombiMotor. Allow gear housing to cool down. Clean the KombiTool with a damp cloth.
12.2 Cleaning the Blades
Switch off the KombiMotor. Spray the blades with STIHL resin solvent. Switch on the KombiMotor for 5 seconds.
The blades run. STIHL resin solvent is distrib- uted evenly.
13 Maintenance
13.1 Maintenance Intervals
The maintenance intervals are dependent on the environmental and operating conditions. STIHL recommends the following maintenance inter- vals:
After every 25 hours of operation Lubricate the gearbox.

10 Transporting
13.2 Lubricating the Gearbox
Switch off the KombiMotor.
1 2

0000-GXX-8739-A0

Remove the screw plug (2). If no grease can be seen on the end of the
screw plug (2): Screw the tube (1) of STIHL gear grease
into the filler hole. Pump 10 g of STIHL gear grease into the
gear housing. Unscrew the tube (1) of STIHL gear grease. Refit and tighten down the screw plug (2)
firmly. Run the KombiMotor for 1 minute.
STIHL gear grease is distributed evenly.
13.3 Removing and Attaching the Blade
13.3.1 Removing the Blades

WARNING
The cutting edges of the blades are sharp. There is a risk of cut injuries. Wear work gloves made of durable mate- rial.
Switch off the KombiMotor.

3 6

0000-GXX-8733-A0

Remove screw (1) clockwise. Remove the rider plate (2). Remove screws (3) counterclockwise. Remove the blade (4). Remove screws (5) counterclockwise. Remove the blade (6).

0458-811-0121-C

14 Repairing 13.3.2 Mounting the Blades

WARNING
The cutting edges of the blades are sharp. There is a risk of cut injuries. Wear work gloves made of durable mate- rial.
Switch off the KombiMotor.

Fit the blade (1). Insert the screws (2) clockwise and tighten
them down firmly. Fit the blade (3). Insert the screws (4) clockwise and tighten
them down firmly. Fit the rider plate (5). Fit the screw (6) and tighten it down firmly
counterclockwise.
13.4 Offsetting the Blades
WARNING
The cutting edges of the blades are sharp. There is a risk of cut injuries. Wear work gloves made of durable mate- rial.
Switch off the KombiMotor. Remove the blades.

120°

Mount the blades 120° offset. If the blades have already been offset twice:
Replace the blades. If you have any queries: Contact a STIHL
servicing dealer for assistance.

0000-GXX-8741-A0

0000-GXX-8734-A0 0000-GXX-8742-A0

English
13.5 Sharpening the Blades
WARNING The cutting edges of the blades are sharp.
There is a risk of cut injuries. Wear work gloves made of durable mate-
rial. Switch off the KombiMotor. Remove the blades.
2
1
Use a STIHL flat crosscut file to sharpen the cutting edge (2). The file only sharpens on the forward stroke. Maintain the specified sharp- ening angle, 15.2.
Sharpen the other cutting edges. Mount the blades. If you have any queries: Contact a STIHL
servicing dealer for assistance.
14 Repairing
14.1 Repairing the KombiTool
The KombiTool cannot be repaired by the user. If the KombiTool is damaged: Do not use the
KombiTool and contact your STIHL servicing dealer for assistance.
15 Specifications
15.1 STIHL RG-KM KombiTool
Weight with blades: 2.5 kg
15.2 Blades
Thickness: 1.25 mm Minimum width (tooth): 5 mm Minimum length (tooth): 10 mm Sharpening angle: 45°
15.3 Sound and vibration values
The K value for the sound pressure level is 2 dB(A). The K value for the sound power level is 2 dB(A). The K-value for vibration levels is 2 m/s².

0458-811-0121-C

English

15 Specifications

RG-KM with KM 94 R Sound pressure level Lpeq measured on reflec-
tive surface according to ISO 22868: 93 dB (A) Sound power level Lweq measured on reflec-
tive surface according to ISO 22868: 107 dB(A) Vibration level ahv,eq measured according to ISO 22867 Control handle: 6.1 m/s² Loop handle: 5.9 m/s²
RG-KM with KM 111 R Sound pressure level Lpeq measured on reflec-
tive surface according to ISO 22868: 96 dB(A) Sound power level Lweq measured on reflec-
tive surface according to ISO 22868: 108 dB(A) Vibration level ahv,eq measured according to ISO 22867 Control handle: 5.4 m/s² Loop handle: 5.8 m/s²
RG-KM with KM 131 Sound pressure level Lpeq measured on reflec-
tive surface according to ISO 22868: 98 dB(A) Sound power level Lweq measured on reflec-
tive surface according to ISO 22868: 109 dB(A) Vibration level ahv,eq measured according to ISO 22867 Control handle: 4.5 m/s² Left handle: 5.0 m/s²
RG-KM with KM 131 R Sound pressure level Lpeq measured on reflec-
tive surface according to ISO 22868: 98 dB(A) Sound power level Lweq measured on reflec-
tive surface according to ISO 22868: 109 dB(A) Vibration level ahv,eq measured according to ISO 22867 Control handle: 5.6 m/s² Loop handle: 6.1 m/s²
RG-KM with KMA 130 R Sound pressure level Lpeq measured on reflec-
tive surface according to ISO 22868: 84 dB(A) Sound power level Lweq measured on reflec-
tive surface according to ISO 22868: 94 dB(A) Vibration level ahv,eq measured according to
ISO 22867 Control handle: 4.1 m/s² Loop handle: 4.4 m/s²

RG-KM with KMA 135 R Sound pressure level Lpeq measured on reflec-
tive surface according to ISO 22868: 80.5 dB(A) Sound power level Lweq measured on reflec- tive surface according to ISO 22868: 92.8 dB(A) Vibration level ahv,eq measured according to ISO 22867 Control handle: 3.7 m/s² Loop handle: 4.3 m/s²
RG-KM with KMA 80.0 R Sound pressure level Lpeq measured on reflec-
tive surface according to ISO 22868: 81 dB(A) Sound power level Lweq measured on reflec-
tive surface according to ISO 22868: 94 dB(A) Vibration level ahv,eq measured according to
ISO 22867 Control handle: 3.2 m/s² Loop handle: 4.7 m/s²
RG-KM with KMA 120.0 R Sound pressure level Lpeq measured on reflec-
tive surface according to ISO 22868: 81 dB(A) Sound power level Lweq measured on reflec-
tive surface according to ISO 22868: 94 dB(A) Vibration level ahv,eq measured according to
ISO 22867 Control handle: 3.1 m/s² Loop handle: 4.6 m/s²
RG-KM with KMA 200.0 R Sound pressure level Lpeq measured on reflec-
tive surface according to ISO 22868: 81 dB(A) Sound power level Lweq measured on reflec-
tive surface according to ISO 22868: 94 dB(A) Vibration level ahv,eq measured according to
ISO 22867 Control handle: 4.3 m/s² Loop handle: 6.7 m/s²
For information on compliance with the Physical Agents (Vibration) Directive 2002/44/EC, see www.stihl.com/vib.
15.4 REACH
REACH is an EC regulation and stands for the Registration, Evaluation, Authorisation and Restriction of Chemical substances.
For information on compliance with the REACH regulation see www.stihl.com/reach.

0458-811-0121-C

16 Combinations with KombiMotors

16 Combinations with Kombi- Motors

16.1 STIHL RG-KM
The KombiTool may be mounted to the following
KombiMotors:
STIHL KM 94 R STIHL KM 111 R STIHL KM 131 STIHL KM 131 R STIHL KMA 130 R STIHL KMA 135 R STIHL KMA 80.0 R STIHL KMA 120.0 R STIHL KMA 200.0 R

17 Spare Parts and Accesso- ries

17.1

Spare parts and accessories
These symbols indicate original STIHL spare parts and original STIHL acces- sories.

STIHL recommends the use of original STIHL spare parts and accessories.
Despite ongoing market observation, STIHL is unable to judge the reliability, safety and suitabil- ity of other manufacturers’ spare parts and accessories; accordingly, STIHL cannot warrant for the use of those parts.

Original STIHL spare parts and original STIHL accessories are available from STIHL dealers.

18 Disposal

18.1 Disposing of KombiTools

Contact the local authorities or your STIHL dealer for information on disposal.

Improper disposal can be harmful to health and pollute the environment. Take STIHL products including packaging to a
suitable collection point for recycling in accord- ance with local regulations. Do not dispose with domestic waste.

19 EC Declaration of Con- formity

19.1 STIHL RG-KM KombiTool

ANDREAS STIHL AG & Co. KG Badstraße 115 D-71336 Waiblingen

0458-811-0121-C

English
Germany declare under our sole responsibility that Category: Weeder KombiTool Machine category: Grass trimmer, clearing
saw Manufacturer’s brand: STIHL Model: RG-KM Serial number: 4180 conforms to the relevant provisions of Directive 2006/42/EC and has been developed and manu- factured in compliance with the following stand- ards in the versions valid on the date of produc- tion: EN ISO 12100 (in conjunction with the specified KM models). EN ISO 12100, EN 603351, EN 50636291 (in conjunction with KMA 130 R). EN ISO 12100, EN 60335-1 taking into account EN 50636-2-91, EN 62841-1 and IEC 62841-4-4 (in conjunction with KMA 135 R). EN ISO 12100, EN 628411 taking into account IEC 62841-4-4, EN 60335-1, EN 50636291 (in conjunction with KMA 80.0 R, KMA 120.0 R, KMA 200.0 R). The technical documents are stored at ANDREAS STIHL AG & Co. KG Produktzulas- sung. The year of manufacture is indicated on the KombiTool. Waiblingen, 2024-04-11 ANDREAS STIHL AG & Co. KG
pp Robert Olma, Vice President, Regulatory Affairs & Global Governmental Relations
20 UKCA Declaration of Con- formity
20.1 STIHL RG-KM KombiTool
ANDREAS STIHL AG & Co. KG Badstraße 115 D-71336 Waiblingen Germany
11

English
declare under our sole responsibility that Category: Weeder KombiTool Machine category: Grass trimmer, clearing
saw Manufacturer’s brand: STIHL Model: RG-KM Serial identification number: 4180
conforms to the relevant provisions of UK Direc- tive Supply of Machinery (Safety) Regulations 2008 and has been developed and manufac- tured in compliance with the following standards in the versions valid on the date of production:
EN ISO 12100 (in conjunction with the specified KM models).
EN ISO 12100, EN 603351, EN 50636291 (in conjunction with KMA 130 R).
EN ISO 12100, EN 60335-1 taking into account EN 50636-2-91, EN 62841-1 and IEC 62841-4-4 (in conjunction with KMA 135 R).
EN ISO 12100, EN 628411 taking into account IEC 62841-4-4, EN 60335-1, EN 50636291 (in conjunction with KMA 80.0 R, KMA 120.0 R, KMA 200.0 R).
The technical documents are stored at ANDREAS STIHL AG & Co. KG Produktzulas- sung.
The year of manufacture is indicated on the KombiTool.
Waiblingen, 2024-04-11
ANDREAS STIHL AG & Co. KG
pp
Robert Olma, Vice President, Regulatory Affairs & Global Governmental Relations
21 Addresses
www.stihl.com
22 General Power Tool Safety Warnings
22.1 Introduction
This chapter reproduces the pre-formulated, gen- eral safety precautions specified in the IEC 62841 standard for hand-held motor-oper- ated electric tools.
STIHL is obliged to publish these texts.

21 Addresses
The safety precautions and warnings on avoiding an electric shock given under “Electrical Safety” do not apply to STIHL cordless products.
WARNING
Read all safety warnings, instructions, illustra- tions and specifications provided with this power tool. Failure to follow all instructions lis- ted below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
The term “electric power tool” in the safety warn- ings refers to mains-operated (corded) power tools or battery-operated (cordless) power tools.
22.2 Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
22.3 Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (groun- ded) power tools.Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entan- gled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

0458-811-0121-C

22 General Power Tool Safety Warnings
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
22.4 Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better con- trol of the power tool in unexpected situa- tions.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facillities, ensure these are connected and properly used. Use of dust collection can reduce dustrelated hazards.
h) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a frac- tion of a second.
22.5 Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The correct
0458-811-0121-C

English
power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dan- gerous and must be repaired.
c) Disconnect the plug from the power source and/or remove the battery pack, if detacha- ble, from the power tool before making any adjustments, changing accessories, or stor- ing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dan- gerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condi- tion that may affect the power tool’s opera- tion. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situa- tion.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
22.6 Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
b) Use power tools only with specifically desig- nated battery packs. Use of any other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other
13

English
small metal objects, that can make a connec- tion from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
e) Do not use a battery pack or tool that is dam- aged or modified. Damaged or modified bat- teries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause explo- sion.
g) Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instruc- tions. Charging improperly or at tempera- tures outside the specified range may dam- age the battery and increase the risk of fire.
22.7 Service
a) Have your power tool serviced by a qualified repair person using only identical replace- ment parts. This will ensure that the safety of the power tool is maintained.
b) Never service damaged battery packs. Serv- ice of battery packs should only be per- formed by the manufacturer or authorized service providers.
22.8 Grass Trimmer, Brush Cutter and Brush Saw Safety Warn- ings
a) Do not use the machine in bad weather con- ditions, especially when there is a risk of lightning. This increases the risk of being struck by lightning.
b) Thoroughly inspect the area for wildlife where the machine is to be used. Wildlife may be injured by the machine during opera- tion.
c) Thoroughly inspect the area where the machine is to be used and remove all stones, sticks, wires, bones, and other for- eign objects. Thrown objects can cause per- sonal injury.

22 General Power Tool Safety Warnings
d) Before using the machine, always visually inspect to see that the cutter or blade and the cutter or blade assembly are not dam- aged. Damaged parts increase the risk of injury.
e) Follow instructions for changing accessories. Improperly tightened blade security nuts or bolts may either damage the blade or result in it becoming detached.
f) The rated rotational speed of the blade must be at least equal to the maximum rotational speed marked on the machine. Blades run- ning faster than their rated rotational speed can break and fly apart.
g) Wear eye, ear, head and hand protection. Adequate protective equipment will reduce personal injury by flying debris or accidental contact with the cutting line or blade.
h) While operating the machine, always wear non-slip and protective footwear. Do not operate the machine when barefoot or wear- ing open sandals. This reduces the chance of injury to the feet from contact with the moving cutters or lines.
i) While operating the machine, always wear safety footwear. Do not operate the machine when barefoot or wearing open sandals. This reduces the chance of injury to the feet from contact with a moving cutter, line or blade.
j) While operating the machine, always wear long trousers. Exposed skin increases the likelihood of injury from thrown objects.
k) Keep bystanders away while operating the machine. Thrown debris can result in serious personal injury.
l) Always use two hands when operating the machine. Holding the machine with both hands will avoid loss of control.
m) Hold the machine by insulated gripping sur- faces only, because the cutting line or blade may contact hidden wiring or its own cord. Cutting line or blades contacting a “live” wire may make exposed metal parts of the machine “live” and could give the operator an electric shock.
n) Always keep proper footing and operate the machine only when standing on the ground. Slippery or unstable surfaces may cause a loss of balance or control of the machine.
o) Do not operate the machine on excessively steep slopes. This reduces the risk of loss of

0458-811-0121-C

22 General Power Tool Safety Warnings
control, slipping and falling which may result in personal injury.
p) When working on slopes, always be sure of your footing, always work across the face of slopes, never up or down and exercise extreme caution when changing direction. This reduces the risk of loss of control, slip- ping and falling which may result in personal injury.
q) Keep all parts of the body away from the cut- ter, line or blade when the machine is operat- ing. Before you start the machine, make sure the cutter, line or blade is not contacting any- thing. A moment of inattention while operat- ing the machine may result in injury to your- self or others.
r) Do not operate the machine above waist height. This helps prevent unintended cutter or blade contact and enables better control of the machine in unexpected situations.
s) When cutting brush or saplings that are under tension, be alert for spring back. When the tension in the wood fibres is released, the brush or sapling may strike the operator and/or throw the machine out of control.
t) Use extreme caution when cutting brush and saplings. The slender material may catch the blade and be whipped toward you or pull you off balance.
u) Maintain control of the machine and do not touch cutters, lines or blades and other haz- ardous moving parts while they are still in motion. This reduces the risk of injury from moving parts.
v) Carry the machine with the machine switched off and away from your body. Proper handling of the machine will reduce the likelihood of accidental contact with a moving cutter, line or blade.
w) When transporting or storing the machine, always fit the cover on metal blades. Proper handling of the machine will reduce the likeli- hood of accidental contact with the blade.
x) Only use replacement cutters, lines, cutting heads and blades specified by the manufac- turer. Incorrect replacement parts may increase the risk of breakage and injury.
y) When clearing jammed material or servicing the machine, make sure the switch is off and the battery pack is removed. Unexpected starting of the machine while clearing jam-

English
med material or servicing may result in seri- ous personal injury.

0458-811-0121-C

www.stihl.com

*04588110121C*
0458-811-0121-C

Documents / Resources

STIHL RG-KM Multi Task Tools [pdf] Instruction Manual
RG-KM, RG-KM Multi Task Tools, RG-KM, Multi Task Tools, Task Tools, Tools

References

User Manual

STIHL-RG-KM-Multi-Task-Tools-PRODUCT

Specifications

Product Usage Instructions

FAQs

Introduction

Guide to Using this Manual

Overview

Safety Precautions

Preparing KombiTool for Operation

Checking the KombiTool

Using the KombiTool

After Finishing Work

Transporting

Documents / Resources

References

Leave a comment

Cancel reply