ST012 GPS Bluetooth Remote Controller
Product Information
Specifications:
- Compliance: Part 15 of FCC Rules
- Radiation Exposure Limits: FCC approved for uncontrolled
environment - Minimum Distance: 0cm between radiator and body
Product Usage Instructions
Installation:
- Place the device on a stable surface.
- Ensure there is a minimum distance of 0cm between the radiator
of the device and your body. - Connect the device to a power source as per the manufacturer’s
instructions. - Follow any additional setup steps outlined in the user
manual.
Operation:
- Turn on the device using the power button.
- Follow the on-screen instructions or refer to the user manual
for specific functions. - Avoid causing harmful interference to other devices while
operating this equipment. - If you experience any undesired operation, check for external
interferences and adjust the device’s positioning if needed.
FAQ (Frequently Asked Questions)
Q: Can I modify the device?
A: Any changes or modifications not approved by the manufacturer
may void your warranty and authority to operate the equipment.
Q: What should I do if the device causes interference?
A: Ensure that the device is not causing harmful interference to
other equipment. If interference occurs, try adjusting the device’s
position or relocating it to minimize disruptions.
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Documents / Resources
 |
STARTRC ST012 GPS Bluetooth Remote Controller [pdf] User Manual 2BH6A-ST012, 2BH6AST012, ST012 GPS Bluetooth Remote Controller, ST012, GPS Bluetooth Remote Controller, Bluetooth Remote Controller, Remote Controller, Controller |