StarTech FCREADMICRO3V2 USB 3.2 Gen 1 5Gbps Multi Media Memory Card Reader
Product Specifications
- Product Name: USB 3.2 Gen 1 (5Gbps) Multi-Media Memory Card Reader
- Product ID: FCREADMICRO3V2
- Card Slots:
- 1. Micro SD Card Slot
- 2. SD / MMC Card Slot
- 3. CF Card Slot
- USB-A to USB-C Adapter included
Product ID
FCREADMICRO3V2
| Component | Function | |
| 1 | Micro SD Card Slot | • Insert a Micro SD Card |
| 2 | SD / MMC Card Slot | • Insert a SD / MMC Card |
| 3 | CF Card Slot | • Insert a CompactFlash Card |
| 4 | USB-C Host Connection | • Connect to a USB-C Host |
| 5 | USB-A to USB-C Adapter | • Connect the Memory Card Reader to a USB-A Host |
Product Information
For the latest drivers/software, technical specifications, and declarations of conformance, please visit: www.StarTech.com/FCREADMICRO3V2
Requirements
- USB-A or USB-C Enabled Host Device x 1
- Memory Card
Package Contents
- Multi-Media Memory Card Reader x 1
- Quick-Start Guide x 1
Installation
WARNING! When removing media cards connected to Multi-Media Memory Card Reader, it is required to remove/eject the device from within the operating system. Failure to remove storage devices properly can result in lost data, or permanent damage to the Memory Card or Card Reader.
Installing the Multi-Media Memory Card Reader
- Insert a Memory Card into the compatible Media Card Slot.
Note: The Multi-Media Memory Card Reader supports read/write to all three drives simultaneously. - (Optional) Connect the Multi-Media Memory Card Reader’s USB-A to USB-C Adapter.
- Connect the USB Host Connection to an available USB-A or USB-C Port on the Host Computer.
The operating system will detect the Multi-Media Memory Card Reader and automatically install the correct Drivers.
Card Support
This Multi-Media Memory Card Reader supports:
- Secure Digital v3.0 UHS-I
- SDR12
- SDR25
- SDR50
- DDR50
- SDR104
- MMC
- CompactFlash 6.0
- UltraDMA Mode 7
- PIO Mode 6
Regulatory Compliance
FCC – Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss
of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
StarTech.com
Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
FAQ
How do I safely remove media cards from the Multi-Media Memory Card Reader?
When removing media cards connected to the Multi-Media Memory Card Reader, it is required to remove/eject the device from within the operating system. Failure to remove storage devices properly can result in lost data or permanent damage to the Memory Card or Card Reader.
Documents / Resources
 |
StarTech FCREADMICRO3V2 USB 3.2 Gen 1 5Gbps Multi Media Memory Card Reader [pdf] User Guide FCREADMICRO3V2, FCREADMICRO3V2 USB 3.2 Gen 1 5Gbps Multi Media Memory Card Reader, USB 3.2 Gen 1 5Gbps Multi Media Memory Card Reader, Gen 1 5Gbps Multi Media Memory Card Reader, Multi Media Memory Card Reader, Media Memory Card Reader, Card Reader |