START-X Range Extender Kit
The START-X Range Extender Kit SXA1B2W upgrades compatible remote-start systems by extending their operating distance up to 3,000 feet. It uses two-way RF communication to transmit starting commands and provide confirmation when the vehicle starts successfully. The kit includes two remote key fobs and a dedicated antenna module for improved long-distance communication. Its plug-and-play design integrates with supported START-X installations without requiring additional wire cutting or splicing.
Features
- 3,000-Foot Extended Range: Provides remote-start operation from distances up to 3,000 feet under favorable conditions.
- Two-Way Communication: Allows the remote and compatible vehicle system to exchange signals.
- Remote Start Confirmation: Provides feedback indicating whether the vehicle successfully started.
- Dual Remote Controls: Includes two remote key fobs for convenient access.
- Long-Range RF Technology: Uses radio-frequency communication for wireless remote-start commands.
- Dedicated RF Antenna: Includes a long-range antenna module for communication with the vehicle.
- Plug-and-Play Installation: Designed to connect to supported START-X hardware with compatible connectors.
- No Wire Splicing Required: Helps simplify installation without cutting factory wiring.
- START-X System Integration: Extends the capabilities of an existing compatible START-X remote starter.
- Convenient Remote Operation: Enables vehicle starting from locations such as homes, offices, and parking areas.
- Separate Remote Key Fobs: Provides dedicated controls without requiring a smartphone application.
- Push-to-Start Compatibility: Supports specifically listed vehicles equipped with push-button ignition.
- Key Ignition Compatibility: Works with selected vehicles using traditional keyed ignition.
- Multiple Vehicle Applications: Covers supported models across several automotive brands.
- Remote Pairing Support: Allows the included remotes to be programmed using the applicable START-X installation procedure.
Remote Programming Instructions Type-1
Please ensure your remote start is programmed and functioning before programming the remotes. Also review images to ensure they match your module.
Plug the supplied RF antenna and extension cable into the blue connector on your remote start T-Harness. It will be marked with a flag label.
Remove only the black connector from the module.
Press and hold the programming button. Re-connect the black connector.
When the Blue and Red LEDs are momentarily lit, release the programming button.
Press and hold the programming button until the LEDs turn off, and turn back on again.
Do not start the vehicle. Turn the ignition to On by pressing the “Push to Start” button twice or “turning the key” to On, and all the module LEDs should turn on.
1-Way Remote Steps (Type-1)
2-Way Remote Steps (Type-1)
On the new key fob, press the bottom [+] button first, followed by the top (Lock) button.
The top LED will stop blinking and you will hear an audible chime to confirm successful pairing.
To start your vehicle, you will use the third button down under the unlock button.
If you want to add additional remotes follow these steps for each one. Turn off the vehicle when you are done programming.
Remote Programming Instructions Type-2
Please ensure your remote start is programmed and functioning before programming the remotes. Also review images to ensure they match your module.
Plug the supplied RF antenna and extension cable into the blue port on your remote start module.- Press unlock on your OEM remote.
Turn the ignition On-Off-On. (Do not start the vehicle.)
Press and release the Brake four times. (The LED on the antenna should flash.)
1-Way Remote Steps (Type-2)
Press and hold the new key fob button. The LED on the fob will blink blue rapidly and then go out. When the blue LED comes back on solid, release the button. Pairing is successful.
2-Way Remote Steps (Type-2)
On the new key fob, press the bottom [+] button first followed by the top (Lock) button.
The top LED will stop blinking and you will hear an audible chime to confirm successful pairing.
To start your vehicle, you will use the third button down under the unlock button.
If you want to add additional remotes follow these steps for each one. Turn off the vehicle when you are done programming.
Troubleshooting
| Problem | Possible Cause | Recommended Solution |
|---|---|---|
| Remote starter does not respond | Weak battery or disconnected antenna | Check the remote battery and antenna connection. |
| Operating range is shorter than expected | Obstacles or RF interference | Test in an open area and inspect antenna positioning. |
| Remote does not pair | Incorrect programming procedure | Follow the specific START-X module pairing instructions. |
| Vehicle does not start remotely | Existing remote-start system issue | Verify that the original START-X system operates correctly. |
| No two-way confirmation | Pairing or communication problem | Check remote pairing and test at a shorter distance. |
| One remote works but the other does not | Second remote not paired or weak battery | Check its battery and repeat the approved pairing procedure. |
| Antenna indicator does not respond | Loose connection or module power issue | Have the antenna connection and module power checked. |
| Remote buttons respond intermittently | Weak battery or worn button contacts | Replace the battery and inspect the remote for damage. |
| System stops working after installation | Incorrect connection or incompatible module | Verify compatibility and have the installation inspected. |
| Remote works only near the vehicle | Antenna obstruction or interference | Check the antenna placement and surrounding interference sources. |
| Vehicle responds but engine does not start | Vehicle or remote-start system safety condition | Check the base system’s troubleshooting guide and vehicle requirements. |
| Both remotes stop functioning | Shared antenna or module connection issue | Inspect the RF antenna connection and consult START-X support. |
For a step-by-step installation video, please visit RF KITS
Feel free to contact us for any questions, technical difficulties, or further guidance. are here to help. help@remotestartx.com. (848)-294-3448 When contacting support, please state the year, make, and model, as well as the service # from the back of the remote starter module.
Documents / Resources
 | Range Extender Kit |
References
- One moment, please...www.remotestartx.com
- User Manualmanual.tools