Mini High Speed Internet
“
Product Information
Specifications
- MINI WALL MOUNT:
- Compatibility: Starlink Mini, 4 Overhang Maximum
- Package Dimensions: 270 x 360 x 95 mm (10.6 x 14.2 x 3.7
in) - Package Weight: 1.5 kg (3.3 lbs)
- MINI PIVOT MOUNT:
- Compatibility: Starlink Mini
- Package Dimensions: 270 x 360 x 95 mm (10.6 x 14.2 x 3.7
in) - Package Weight: 1.8 kg (4.0 lbs)
- MINI MOBILITY MOUNT:
- Compatibility: Starlink Mini
- Package Dimensions: 185.5 x 249.9 x 86 mm (7.3 x 9.8 x 3.4
in) - Package Weight: 0.6 kg (1.32 lbs)
Product Usage Instructions
MINI WALL MOUNT
- Choose a suitable exterior wall near the top of the gable or
fascia for installation. - Use the recommended tools (Drill, Drill Bit, Hex Socket,
Marker, Level) for installation. - Follow the included instructions to securely mount the wall
mount. - Adjust the positioning as needed to optimize signal reception
and connectivity.
MINI PIVOT MOUNT
- Select a slanted, shingled roof for installation.
- Utilize the provided tools (Drill, Drill Bit, Hex Socket,
Marker, Level) for installation. - Refer to the user-friendly instructions to install the pivot
mount securely. - Fine-tune the swiveling mechanism to adapt to different angles
for optimal Starlink performance.
MINI MOBILITY MOUNT
- Ensure a waterproof seal when mounting on wood, fiberglass,
metal, or plastic surfaces. - Use the stainless steel fasteners included to resist corrosion
in harsh environments. - Maintain a 9-degree mounting angle for signal stability during
extreme weather conditions.
FAQ
Q: Are these mounts compatible with other Starlink models?
A: No, these mounts are specifically designed for use with the
Starlink Mini model.
Q: Can I install the wall mount on any type of exterior
wall?
A: The wall mount is best suited for installation on an exterior
wall near the top of the gable or fascia as mentioned in the
instructions for optimal performance.
“`
| MINI ACCESSORIES
Available to purchase after receiving your order confirmation email.
MINI WALL MOUNT
The Starlink Mini Wall Mount is designed for installation on an exterior wall near the top of the gable or fascia. This wall mount can accommodate a 4″ overhang maximum and offers a secure, long-reaching platform to optimize the placement of your Starlink for the best connectivity and performance.
Crafted from durable, weather-resistant materials, the mount ensures a sturdy and enduring foundation for your Starlink, capable of withstanding various environmental conditions. Its elongated design allows for greater flexibility in positioning, enabling easy alignment and adjustment to maximize signal reception.
Easy to install and adjust, the wall mount comes with all necessary hardware and instructions, simplifying the setup process for a hassle-free experience.
Compatibility: Starlink Mini, 4″ Overhang Maximum
Kit Contents: Wall Mount, Silicone, 2x Lag Screws, 20x Cable Routing Clips
Recommended Tools: Drill, 6 mm (1/4 in) Drill Bit, 9/16 in Hex Socket, Marker, Level
Package Dimensions: 270 x 360 x 95 mm (10.6 x 14.2 x 3.7 in)
Package Weight: 1.5 kg (3.3 lbs)
438mm (17.2 in)
72 mm (2.8 in)
325 mm (12.8 in)
155 mm (6.1 in)
70 mm (2.75 in)
MINI PIVOT MOUNT
The Starlink Mini Pivot Mount is perfect for installation on slanted, shingled roofs. Designed for ease of use and flexibility, the Pivot Mount swiveling mechanism enables effortless fine-tuning, adapting to various angles and directions, thus maximizing the performance of your Starlink.
Crafted from durable, weather-resistant materials, the mount ensures a sturdy and enduring foundation for your Starlink, capable of withstanding various environmental conditions. Its elongated design allows for greater flexibility in positioning, enabling easy alignment and adjustment to maximize signal reception.
The Pivot Mount is engineered for easy installation and is accompanied by all necessary hardware and user-friendly instructions, ensuring a hassle-free setup process.
Compatibility: Starlink Mini
Kit Contents: Pivot Mount, 2x Sealant Tape Squares, 2x Sealant Tape Strips, 2x Lag Screws, 20x Cable Routing Clips
Recommended Tools: Drill, 6 mm (1/4 in) Drill Bit, 9/16 in Hex Socket, Marker, Level
Package Dimensions: 270 x 360 x 95 mm (10.6 x 14.2 x 3.7 in)
Package Weight: 1.8 kg (4.0 lbs)
425 mm (16.7 in)
140 mm (5.5 in)
311 mm (12.2 in)
90°
223 mm (8.78 in)
MINI MOBILITY MOUNT
The Mini Mobility Mount is designed to create a waterproof seal and protect against water ingress when permanently mounting to wood, fiberglass, metal, and plastic. The Mobility Mount features stainless steel fasteners, which are corrosion resistant to support harsh environments. This durable and versatile mount also supports a 9 degree mounting angle to maintain a signal during extreme and wet weather conditions.
87.6 mm (3.45 in)
Compatibility: Starlink Mini
Kit Contents: Mobility Mount, 2x 50 mm Bolts, 2x 30 mm Bolts 2x, 20 mm Bolts, 2x Nyloc Nuts, 2x Stainless Steel Washers, 2x Sealing Washers
Package Dimensions: 185.5 x 249.9 x 86 mm (7.3 x 9.8 x 3.4 in)
Package Weight: 0.6 kg (1.32 lbs)
25 mm (0.98 in)
260 mm (10.2 in) 35 mm (1.38 in)
162.3 mm (6.39 in)
82.3 mm (5.51 in)
296.5 mm (11.7 in)
55.5 mm (2.19 in)
MINI ROOF RACK MOUNT
The Mini Roof Rack Mount is designed to attach to varying vehicle roof racks, ranging in thickness from 12 mm (0.47 in) to 48 mm (1.9 in), with a maximum width of 88 mm (3.5 in). Use your Mini on-the-go, and easily remove your Mini from the Roof Rack Mount when not in use. NOT INTENDED TO BE MOUNTED TO ROUND PROFILE BARS.
Compatibility: Starlink Mini
Kit Contents: Roof Rack Mount
Package Dimensions: 185.5 x 249.9 x 86 mm (7.3 x 9.8 x 3.4 in)
Package Weight: 0.6 kg (1.32 lbs)
103.2 mm (4.1 in)
260 mm (10.2 in)
296.5 mm (11.7in)
MINI PIPE ADAPTER AND FLAT MOUNT
The Mini Pipe Adapter and Flat Mount is designed for installation on a pipe or flat surface. The Mini Pipe Adapter and Flat Mount can replace the pipe adapter from the Mini Kit in case of damage or if you need an extra pipe mount outside of your permanent installation.
Compatibility: Starlink Mini
Kit Contents: Mini Pipe Adapter and Flat Mount *Flat mounting fasteners not included.
Package Dimensions: 231.5 x 148.5 x 77.5 mm (9.11 x 5.85 x 3.05 in)
Package Weight: 0.35kg (0.77 lbs)
41.9 mm (1.65in)
66.1 mm (2.6 in)
103.5 mm (4.07 in)
58.1 mm (2.29 in)
83.9 mm (3.3 in)
172.7 mm (6.8in)
MINI CAR ADAPTER
The Starlink Mini Car Adapter is designed to power your Starlink Mini on-the-go via USB-C, replacing the Mini 15m Power Cable and Mini Power Supply from the Starlink Mini Kit. The Mini Car Adapter can be used with any standard automotive 12-24V auxiliary power outlet, commonly referred to as the car cigarette lighter.
Compatibility: Starlink Mini
Kit Contents: Mini Car Adapter, Mini USB-C Cable
Package Dimensions: 208.5 x 153.75 x 67.5 mm (8.21 x 6.1 x 2.67in)
Package Weight: 0.43kg (0.95 lbs)
80.4 mm (3.17 in)
42.2 mm (1.67in)
MINI CABLES
MINI DC POWER CABLE | 15 m (49.2 ft)
Designed to replace the Mini 15m DC Power Cable from the Starlink Mini Kit in case of damage to your cable or if an extra cable outside of your installation is needed.
Compatibility: Starlink Mini Cable Length: 15 m (49.2 ft) Package Dimensions: 156 x 285 x 32 mm (6.1 x 11.2 x 1.3 in) Package Weight: 0.5 kg (1.1 lbs)
MINI DC POWER CABLE | 30 m (98.4 ft)
Designed to replace the Mini 15m Power Cable from the Starlink Mini Kit when additional length is needed.
Compatibility: Starlink Mini Cable Length: 30 m (98.4 ft) Package Dimensions: 200 x 182 x 81 mm (7.9 x 7.2 x 3.2 in) Package Weight: 1.3 kg (2.9 lbs)
MINI CABLES
MINI STARLINK CABLE | 15 m (49.2 ft)
The 15 m (49.2 ft) Mini Starlink Ethernet Cable is designed to be used in the RJ45 connectors between the Starlink Mini and Starlink Gen 3 router or third party routers and devices to provide a waterproof seal and protect against water ingress.
Compatibility: Starlink Mini, Gen 3 Router Cable Length: 15 m (49.2 ft) Package Dimensions: 135 x 50 x 360 mm (5.3 x 2 x 14.2 in) Package Weight: 1 kg (2.2 lbs)
Mini USB-C Cable | 5 m (16.4 ft)
The Mini USB-C cable is designed to power your Starlink Mini on-the-go via USB-C, replacing the Mini 15m Power Cable from the Starlink Mini Kit. Requires a 100W (20V/5A) power source.
Note: This USB-C cable is specifically designed for powering your Starlink Mini and is not suitable for charging devices like cellphones.
Compatibility: Starlink Mini
Cable Length: 5 m (16.4 ft)
Package Dimensions: 135 X 90 X 46 mm (5.3 x 3.5 x 1.8 in)
Package Weight: 0.3 kg (0.66 lbs)
REPLACE
Documents / Resources
 |
STARLINK Mini High Speed Internet [pdf] User Guide Mini High Speed Internet, High Speed Internet, Speed Internet, Internet |