Star Eye Camera App Instruction Manual

Star-Eye-LOGO

Star Eye Camera App

Star-Eye-Camera-App-PRODUCT

Device networking

Download and install the APP (APP: Star Eye)

  • Method 1: App Store Download Android phones searching for Stareye in app stores Apple searches for ‘Star Eye’ in the App Store
  • Method 2: Scan the QR code to download After scanning the QR code, download and install according to the system Android or iOSStar-Eye-Camera-App-FIG (1)

Networking interface

  1. Click on “Add Device” in the upper left corner or below
  2. Choose the appropriate network connection method based on the device type and interface promptsStar-Eye-Camera-App-FIG (2)

Bluetooth connectivity

  1. According to the interface prompts, confirm that the device status is as described in the interface
  2. After searching for a device, select the device you want to connect to
  3. card status query is normal and automatically connects to the phone
  4. WiFi device select available WiFi enter the correct password and automatically connect to the phoneStar-Eye-Camera-App-FIG (3)

Reverse scanning networking

(WiFi only devices)

Note: Black Light Series does not support this feature

  1. Confirm successful device reset according to the prompts on the page
  2. Select a “2.4G hz” network that can be connected enter the WiFi password and click “Next Step” to generate a QR code
  3. Align the device lens with a QR code, approximately 15 to 30 centimeters. If not connected after some time, please follow the prompts on the page to go to the AP networkStar-Eye-Camera-App-FIG (4)Star-Eye-Camera-App-FIG (5)

Device AP networking

(WiFi only devices)

  1. According to the interface prompts click to go to WiFi configuration find the device hotspot, and return to the APP.
  2. Successfully connected AP allows for viewing of camera content over a short distance without network access.
  3. After the AP connection is successful, follow the prompts to connect to the network select an available WiFi enter the password, and wait.Star-Eye-Camera-App-FIG (6)Star-Eye-Camera-App-FIG (7)

Play interface description

Star-Eye-Camera-App-FIG (8)

  1. set up
  2. Low Power MODE
  3. Battery
  4. Signal strength
  5. PTZ
  6. photograph
  7. Video clarity
  8. record video
  9. Full Screen
  10. microphone
  11. night vision
  12. DualView
  13. Rotation
  14. suspend
  15. sound
  16. Cloud storage
  17. toolI
  18. playback

Note: Functions 2, 12, and 13 are supported by only cama daniel

note

  1. All permissions reminded when downloading the app need to be opened
  2. It is recommended to Factory reset before configuring a new camera

Method of Factory reset:

  1. After the camera is powered on press and hold the reset button for approximately 8 seconds. When the indicator light turns blue the red light slowly flashes and the device is successfully factory reset
  2. Before starting the setup, please plug in and turn on the power within a range of strong Wi-Fi signal close to the router
  3. The camera needs to be turned off when inserting a memory card
  4. It is normal for the phone to be unable to access the internet after connecting to the hotspot of the camera The hotspots of the camera are only for connecting and watching up close

pilot lamp

  1. Not restored to factory, alternating blue and red lights flashing quickly
  2. Reset the completed light off
  3. Waiting to connect to the network red light slowly flashing
  4. No network connection red light always on
  5. Abnormal network connection, a blue light flashing quickly, and a red light constantly on
  6. On the internet, the blue light flashes quickly
  7. Successfully connected to the network, the blue light remains on
  8. During the device upgrade, the blue light slowly flashes and the red light remains on

Product warranty terms

Dear user:

First of all, thank you for choosing this product Please confirm before using this product read the following terms

  1. The warranty period of this product is one year from the date of purchase (subject to a valid purchase certificate) During the warranty period, our company will provide free repair for any malfunctions caused by quality issues with the product itself during normal use
  2. The following situations are not within the scope of free services:
    • Damage caused by improper operation, use, or management by the user
    • Self disassembling products
    • Damage caused by accident, abuse, misuse, water, flooding, fire, or other natural disasters, or improper use or improper maintenance (including damage caused by external forces)
    • The product is not within the warranty period.
  3. If the returned product does not comply with the warranty terms, and repair is required, our company will charge corresponding cost fees.
  4. For each after-sales service beyond the warranty period, we will charge the corresponding repair fees and replacement parts fees according to the minimum standards.

This equipment is only used for legal monitoring scenarios, please do not use it illegally, otherwise, the company will not be responsible for the legal liabilities arising.

Note: all contents are subject to those in the APP

FCC

Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However. There is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter

RF Exposure Statement

To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm from the radiator of your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

 

Documents / Resources

PDF thumbnailCamera App
Instruction Manual · 2BFCX-X51, 2BFCXX51, x51, Camera App, Camera, App

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. Zijn er ook losse zonnepanelen voor dit type camera ?

    Ger Klaver asks Zijn er ook losse zonnepanelen voor dit type camera ?
    Manuals+ clarified question
    Question

    Are there separate solar panels available for this type of camera?

    Answer

    The provided instruction manual for the Star Eye camera app does not mention official separate solar panels or specific compatibility with external solar accessories. The manual focuses on app setup, networking (Bluetooth, QR code, and AP mode), and basic hardware indicators like battery status and pilot lights.

    If your camera model features a USB charging port, it may be compatible with universal 5V solar panels, but we recommend checking with the original seller or manufacturer to ensure compatibility and to avoid voiding your warranty.

  2. Salve l’ app non vede la smart camera, mentre il cellulare vede il wifi della camera smart. Come devo procedere?

    Virgilio Saverio asks Salve l' app non vede la smart camera, mentre il cellulare vede il wifi della camera smart. Come devo procedere?
    Manuals+ clarified question
    Question

    Why does the Star Eye app not see my smart camera even though my phone can see the camera's Wi-Fi signal?

    Answer

    If your phone can see the camera's Wi-Fi signal but the app does not recognize the device, please follow these troubleshooting steps based on the Star Eye manual:

    • Check Frequency: Ensure you are connecting to a 2.4GHz Wi-Fi network. The camera does not support 5GHz networks.
    • App Permissions: Verify that all permissions were granted when you installed the Star Eye app. If permissions were denied, the app may not be able to communicate with the hardware.
    • Factory Reset: It is recommended to reset the camera before configuration. While the camera is powered on, press and hold the reset button for approximately 8 seconds. The indicator light should turn blue, then flash red slowly to indicate a successful reset.
    • Connection Method: Since your phone sees the camera's hotspot, try the Device AP networking method:
      1. Connect your phone directly to the camera's Wi-Fi hotspot (usually named "XYX..." or "AYS...").
      2. Return to the Star Eye app.
      3. Follow the prompts to select your home Wi-Fi network and enter the password to bridge the camera to your router.
    • Proximity: Ensure the camera, your phone, and the router are in close proximity during the initial setup process.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.