Zigbee L2(WZ) RF hammoho le Push Dimmer
0/1-10V Zigbee + RF + Push Dimmer
Nomoro ea mohlala: L2(WZ) 2 channel 0/1-10V/AC relay output/Tuya APP cloud control/Philips HUE control/taolo ea lentsoe/RF dimming/Push Dim
Likaroloana
- Zigbee + RF + AC push 0/1-10V dimmer, tlhahiso ea 2 channel 0/1-10V pontšo.
- Vol e phahamengtage AC input, High voltage AC relay tlhahiso.
- Taolo ea mebala e fifalang kapa e habeli e ka khethoang ke switch ea DIP.
- Bakeng sa taolo ea mebala e 'meli, tlhahiso ea liteishene tse peli e ka hlophisoa e le bosoeu bo futhumetseng le bosoeu bo pholileng ka ho latellana, kapa e' ngoe bakeng sa ho fetola khanya le e 'ngoe bakeng sa ho fetola mocheso oa mebala.
- 0-10V kapa 1-10V sephetho se ka khethoang ke sesebelisoa sa DIP.
- Taolo ea leru ea Tuya APP, ts'ehetso ea ho tima / ho tima, mocheso oa 'mala le ho khanya ha maemo, ho lieha ho tima / ho tima mabone, ho laola nako, ho hlophisa liketsahalo le mosebetsi oa ho bapala' mino.
- Taolo ea Philips HUE APP ka ho hokela le borokho ba Philips HUE.
- Taolo ea lentsoe, tšehetsa amazon ECHO le TmallGenie sebui se bohlale.
- Maemo a 256 0-100% a fifala ka thelelo ntle le molora.
- Ho lumellana le RF 2.4G sebaka se le seng kapa taolo e hole ea libaka tse ngata.
- Molaoli e mong le e mong oa L2(WZ) a ka boela a sebetsa joalo ka converter ea Zigbee-RF, ebe o sebelisa Tuya APP ho laola selaoli se le seng kapa ho feta sa RF dimming LED kapa mokhanni ka tumellano.
- Hokahana le sesebelisoa sa ho sutumetsa kantle ho fihlela ts'ebetso ea ho tima / ho tima le 0-100% ts'ebetso ea dimming.
- Ho khantša/ho tima nako ea ho fifala 3s e ka khethoa.
Tekheniki Parameters
| Kenyeletso le Sephetho | |
| Keletso voltage | AC100-240V |
| Letshwao la tlhahiso | 2 x 0/1-10V |
| Sephetho sa hajoale | 0/1-10V: 20mA/CH AC: Max 3A |
Mechanical Structures le Installations
Wiring ea sistimi
Hlokomela:
- . Sebaka se kaholimo se lekantsoe sebakeng se sephara (ha ho na tšitiso), Ka kopo, khutlela sebakeng sa 'nete sa tlhahlobo ea betore.
- Ka kopo, e hlahlobe marang-rang a router ea Zigbee sehlopheng sa 2.4G, sehlopha sa 5G ha se fumanehe, 'me u se ke ua pata marang-rang a router ea hau.
- Ka kopo, boloka sebaka se pakeng tsa lisebelisoa tsa L2(WZ) le router haufi, 'me u hlahlobe mats'oao a Wifi.
Setšoantšo sa wiring
Hlokomela:
- Re khothaletsa palo ea bakhanni ba LED ba hokahaneng le 0/1-10V dimmer ha e fete likotoana tse 100, bolelele bo boholo ba lithapo ho tloha ho dimmer ho ea ho mokhanni oa LED ha boa lokela ho feta 50 metres.
- Tima motlakase, ebe o bulela motlakase, pheta hape. Hang-hang tobetsa konopo ea papali makhetlo a 3, lebone la ho tima/ho tima le tla fetoha pakeng tsa 3s le 0.5s.
- Haeba kakaretso ea matla a mokhanni oa dimming ea 0/1-10V a le ka tlase ho 600W, re ka sebelisa boema-kepe ba AC OUT ho khaola motlakase oa mokhanni.
- Ha o sebelisa boema-kepe ba AC OUT, ho hlokahala relay e eketsehileng ea AC kapa khokahanyo ha kakaretso ea hona joale ea mojaro e le holimo ho 3A kapa inrush current e feta 30A.
Mosebetsi oa Push-Dim
- Tobetsa hakhutšoanyane: Bulela kapa tima lebone.
- Tobetsa nako e telele (1-6s): Tobetsa o hatelle ho fifatsa ho fokolang, Ka nako e 'ngoe le e 'ngoe ea ho tobetsa nako e telele, boemo ba khanya bo leba nqa e 'ngoe.
Khokahano ea marang-rang ea Tuya APP le ts'ebetso
Tobetsa 'me u tšoare konopo ea Match/Set bakeng sa 2s, tsosolosa marang-rang a ZigBee. Tobetsa o hatelle Match/Set key bakeng sa 5s, kapa o tobetse habeli Match/Set key ka potlako, Hlakola khokahano ea netweke e fetileng, kenya config mode. lebone le putsoa la LED le benya kapele. Haeba khokahano ea marang-rang ea Tuya APP e atleha, letšoao le leputsoa la LED le tla emisa ho khanya, 'me ho Tuya APP, u ka fumana sesebelisoa sa ZB-DIM kapa ZB-CCT. Pheta matla a ho tima le ho tima bakeng sa linako tse 5 tse latellanang, hape hlakola khokahanyo ea marang-rang e fetileng, kenya mokhoa oa config. Ts'ebetso ea sebopeho sa Tuya APP:
FUMANA:
Thetsa khanya ea selaete ho lokisa khanya.
CCT:
Thetsa lebili la mebala ho fetola mocheso oa 'mala. Thetsa khanya ea selaete ho lokisa khanya.
10V kapa 1-10V dimming setting
- Khetha 0-10V dimmer kapa 1-10V dimmer ho latela mokhanni oa LED o sa khoneng ho tima.
CCT dimming setting
Khetha DIP Switch 2 ON ho qala joalo ka mofuta oa lebone la CCT. (Ha u khetha DIP Switch 2 OFF ho beha mofuta oa khanya ea DIM, tlhahiso ea Ch1 le Ch2 e tšoana.)- Ha motlakase o tima, khetha DIP switch 1 ON, ebe o tobetsa ho tšoara konopo ea Match, 'me u matlafatse dimmer ka nako e ts'oanang, RUN LED indicator e tla benya ka makhetlo a mabeli, e behiloe e le Ch1 bakeng sa ho fetola khanya le Ch2 bakeng sa mocheso oa mebala. lokisa.
- Ha motlakase o tima, khetha DIP switch 1 OFF, ebe o tobetsa ho tšoara konopo ea Match, 'me u matlafatse dimmer ka nako e le' ngoe, RUN LED indicator e tla benya ka makhetlo a mabeli, e behiloe e le Ch1 bakeng sa dimming e futhumetseng e tšoeu le Ch2 bakeng sa bosoeu bo pholileng. ho fifala ka tatellano (setlhophiso sa feme).
L2(WZ) e tsamaisana le taolo e hole ea RF (Ka boikhethelo)
Mosebelisi oa ho qetela a ka khetha mekhoa e loketseng ea papali / hlakola. Ho na le likhetho tse peli bakeng sa khetho:
Sebelisa konopo ea L2(WZ)'s Match
Papali:
Tobetsa konopo ea ho bapisa e khutšoanyane ea L2(WZ), hang-hang tobetsa konopo ea ho tima/ho tima (remoutu ea zone e le 'ngoe) kapa konopo ea zone (remoutu ea libaka tse ngata) ho remoutu.
Hlakola:
Tobetsa o ts'oare konopo ea match ea L2(WZ) bakeng sa 10s ho hlakola match kaofela, Lebone le benya makhetlo a 5 le bolela hore liremote tsohle tse tsamaellanang li hlakotsoe.
Sebelisa Power Restart
Papali:
Tima matla a L2(WZ), ebe o bulela matla, pheta hape. Tobetsa hang hang konopo ea ho tima/ho tima (remoutu ea zone e le 'ngoe) kapa konopo ea zone (remoutu ea libaka tse ngata) makhetlo a 3 ho remoutu. Leseli le panya ka makhetlo a 3 ho bolela hore papali e atlehile.
Hlakola:
Tima matla a L2(WZ), ebe o bulela matla, pheta hape. Tobetsa hang hang konopo ea ho tima/ho tima (remoutu ea zone e le 'ngoe) kapa konopo ea zone (remoutu ea libaka tse ngata) makhetlo a 5 ho remoutu. Leseli le panya ka makhetlo a 5 ho bolela hore li-remote tsohle tse tšoanang li hlakotsoe.
L2(WZ) e sebetsa e le converter ea Zigbee-RF ho tsamaisana le molaoli kapa mokhanni o mong oa RF dimming LED.
Mosebelisi oa ho qetela a ka khetha mekhoa e loketseng ea papali / hlakola. Ho na le likhetho tse peli bakeng sa khetho:
Sebelisa konopo ea Match ea molaoli
Papali:
Tobetsa konopo e khuts'oane ea papali ea molaoli, tobetsa hang-hang konopo ea ho tima/ho tima ho Tuya APP. Letšoao la LED le khanyang ka makhetlo a 'maloa le bolela hore papali e atlehile.
Hlakola:
Tobetsa 'me u tšoare senotlolo sa papali bakeng sa 5s, Leseli la LED le bonesa ka makhetlo a 'maloa le bolela hore papali e hlakotsoe.
Sebelisa Power Restart
Papali:
Tima matla a molaoli, ebe o bulela motlakase, pheta hape. Hang-hang tobetsa konopo ea ho tima/ho tima makhetlo a 3 ho Tuya APP.
Leseli le panya ka makhetlo a 3 ho bolela hore papali e atlehile.
Hlakola:
Tima matla a molaoli, ebe o bulela motlakase, pheta hape. Hang-hang tobetsa konopo ea ho tima/ho tima makhetlo a 5 ho Tuya APP. Leseli le panya ka makhetlo a 5 ho bolela hore papali e hlakotsoe.
Litokomane / Lisebelisoa
 |
Zigbee L2(WZ) RF hammoho le Push Dimmer [pdf] Litaelo L2 WZ RF plus Push Dimmer, L2 WZ RF, Push Dimmer, RF Dimmer, Dimmer |
