VIMAR 01475 Smart Automation By Me Plus Module
Mojule o nang le lisebelisoa tse 3 tsa dijithale tse hlophisehang bakeng sa likhokahano tse ka bang teng mahala, liphetho tse 3 bakeng sa taolo ea LED, Sistimi ea othomathike ea lapeng ea By-me, flush mounting (retrofit).
LIKAROLOANA
- E lekantsoeng phepelo voltage: BUS 29 V.
- Mokhoa o tloaelehileng oa ho taka: 15 mA.
- Lisebelisoa tse 3 tse lokisehang bakeng sa ho hokela ho li-switch kapa likonopo tse tloaelehileng.
- Liphetho tse 3 bakeng sa yuniti ea lipontšo tsa LED, e nang le tlhahiso e lekantsoeng ho max 1 mA le max voltage 24 Vdc.
- LED le konopo ea tlhophiso.
- Sehlopha sa tšireletso: IP20.
- Lisebelisoa tsa yuniti ea lipontšo tsa LED le liphetho tse sirelelitsoeng khahlano le ho fetellatage.
- Thempereichara ea ho sebetsa: -5 °C ho +45°C (tšebeliso ea ka tlung).
- Likonopo tsa rocker le li-block tse sebetsang tsa ho kenya li na le botebo ba sehlopha sa 1 (ke hore, li ka ba tsa sehlopha se le seng feela).
TAOLE MORALO.
- Sephetho sa yuniti ea pontšo ea LED: bonono. 00935.A, .B, .G, .R, .W kapa bonono. 00937.A, .B, .G, .R, .W (LED e 'ngoe le e 'ngoe e tsamaisana le kenyeletso e fapaneng kahoo OUT1 e hokahane le IN1, OUT2 ho IN2, OUT3 ho IN3).
PLUG & BAPALA.
Ha ho na tlhophiso, sesebelisoa se se se hlophisitsoe esale pele ka tsela e latelang:
- ha ho kenngoa 1 ho koetsoe boemo ba "roller shutters UP" bo romelloa holim'a bese;
- ha input 2 e koetsoe "Roller shutters DOWN" boemo bo romelloa holim'a bese;
- ha input 3 e koetsoe "Lights OFF le Roller Shutters DOWN" e romelloa holim'a bese.
Li-LED tse kopantsoeng le lisebelisoa li bontša ho koaloa ha lintho tsena ka ho bulela metsotso e 3. Ho kenya tšebetsong mesebetsi ena kaofela ho hloka ho sebelisa likonopo tsa N/O (mohlalaample bonono. 20008- 19008-14008).
TLHOKOMELISO: Mokhoa oa plug&play o hloka hore sistimi e kenyelle lisebelisoa tsa plug&play feela eseng lisebelisoa tse hlophisitsoeng le By-me.
TS'ELISO LEBAKA VIEW Pro APP.
Bakeng sa lintlha tse felletseng, bona li-Installer manuals, tse ka kopitsoang ho tsoa ho websebaka www.vimar.com.
KEKELO MELAO
Ho kenngoa ho lokela ho etsoa ke basebetsi ba tšoanelehang ho latela melao ea hona joale mabapi le ho kenngoa ha thepa ea motlakase naheng eo lihlahisoa li kenngoa ho eona.
BOHLOKOA: Li-circuit conductors tsa SELV li sirelelitsoe bakeng sa voltage ea 300 V (UL 1061 e tloaelehileng) 'me ka hona ba ka khona ho phela hammoho le li-conductor tse fanoeng ho fihlela ho 230 V~. Ha o etsa likhokahano o tlameha ho ba hlokolosi ho boloka sekontiri lipakeng tsa sedikadikwe sa SELV le seqhubu se kotsitagli-circuits joalo ka ha ho hlokoa ke melao ea ho kenya. Bakeng sa ho kengoa ho ka khonehang, ka kopo sheba litšoantšo tsa SI-Connection bakeng sa khoutu ea ntho e amehang ho www.vimar.com -> Lihlahisoa -> Lenane la lihlahisoa.
TS'ELISO TS'OANELO.
Taelo ea EMC.
Maemo a EN 60669-2-5, EN 50491.
REACH (EU) Regulation no. 1907/2006 - Art.33. Sehlahisoa se ka ba le mesaletsa ea loto.
WEEE - Boitsebiso bakeng sa basebelisi
Haeba lets'oao la moqomo o tšetsoeng le hlaha holim'a thepa kapa sephutheloana, sena se bolela hore sehlahisoa ha sea lokela ho kenyelletsoa le litšila tse ling tse akaretsang qetellong ea nako ea ho sebetsa. Mosebelisi o tlameha ho isa sehlahisoa se tsofetseng sebakeng se hlophisitsoeng sa litšila, kapa a se khutlisetse ho morekisi ha a reka se secha. Lihlahisoa tsa ho lahla li ka romelloa ntle ho tefo (ntle le tlamo leha e le efe e ncha ea ho reka) ho barekisi ba nang le sebaka sa thekiso sa bonyane 400 m2 , haeba ba lekanya ka tlase ho 25 cm. Pokello ea lithōle e hlophisitsoeng hantle bakeng sa ho lahlela sesebediswa se seng se sebelitse hampe, kapa ho e sebelisa hape, e thusa ho qoba litlamorao tse mpe tse ka bang teng tikolohong le maphelong a batho, hape e khothaletsa tšebeliso le/kapa ho sebelisoa bocha ha thepa ea kaho.
PELE VIEW
- A: Konopo ea tlhophiso
- B: Tlhophiso ea LED
- Lithapo +, – BUS line
- Lithapo +, – BUS line
- Lithapo -, 3, 2, 1 OUT liphetho
- Lithapo -, 3, 2, 1 OUT liphetho
- Lithapo -, 3, 2, 1 OUT liphetho
- Lithapo -, 3, 2, 1 OUT liphetho
- Lithapo -, 3, 2, 1 IN tse kenang
- Lithapo -, 3, 2, 1 IN tse kenang
- Lithapo -, 3, 2, 1 IN tse kenang
- Lithapo -, 3, 2, 1 IN tse kenang
MOFUTA LIKHOPO
| THAPELO MOFUTA | KHABANE | INDEX | MOLAOLI | MOSEBETSI |
|
UL 1061 |
AWG22 = 0,33 mm2 |
1 |
Red Rouge | Bese e ntle |
|
2 |
Black Noir | Bese e Negative | ||
|
3 |
Green Vert | Tloaelehileng | ||
| Sephetho sa 3
|
||||
|
5 |
Bosootho/Bosweu | Sephetho sa 2 | ||
|
6 |
Orange/Tšweu | Sephetho sa 1 | ||
|
7 |
Green Vert | Tloaelehileng | ||
|
8 |
Boputsoa | Keletso 3
|
||
|
9 |
Brown | Keletso 2 | ||
|
10 |
Khokahano ea bese, lintho tse kenang le tse hlahisoang li etsahala ka li-conductor, tse ka bang bolelele ba 15 cm. Li-conductors tsa lintho tse kenang le tse hlahisoang bakeng sa yuniti ea lipontšo tsa LED li ka atolosoa ho fihlela ho
boholo ba 30 m (bonyane karolo ea 0.33 mm2).
MAKHOPO
Lisebelisoa tsa mantlha: Likonopo tse tharo tse nang le li-LED tse amehang bakeng sa ho khutlisa
Viale Vicenza, 14
36063 Marostica VI - Italy
49401699A0 01 2111 www.vimar.com
Litokomane / Lisebelisoa
 |
VIMAR 01475 Smart Automation By Me Plus Module [pdf] Bukana ea Mosebelisi 01475, Smart Automation By Me Plus Module, 01475 Smart Automation By Me Plus Module, Automation By Me Plus Module, Module |
