ViewSonic LDS135 letoto le tobileng View Sesebelisoa sa Tharollo ea Pontšo ea LED
Polelo ea Tumellano ea FCC
Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang: (1) sesebelisoa sena se kanna sa se ke sa baka tšitiso e kotsi, 'me (2) sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyelletsa le tšitiso e ka bakang ts'ebetso e sa batleheng.
Indasteri Canada ICES-003 Compliance
Na ICES-003 (B) / NMB-003 (B)
Tumellano ea CE bakeng sa linaha tsa Europe
Sesebelisoa se lumellana le EMC Directive 2014/30/EU le Low Voltage Taelo 2014/35/EU le Radio Equipment Directive 2014/53/EU.
Phatlalatso ea RoHS2 Compliance
Sehlahisoa sena se entsoe le ho etsoa ho latela Directive 2011/65/EU ea Paramente ea Europe le Lekhotla le thibelang tšebeliso ea lintho tse ling tse kotsi lisebelisoa tsa motlakase le tsa elektroniki (RoHS2 Directive) mme ho nkuoa e le ho latela maemo a phahameng a khatello ea maikutlo. boleng bo fanoeng ke European Technical Adaptation Committee (TAC).
Litaba tsa Sephutheloana
| Ntho | Bongata | Hlokomela | ||
|
Pontšo ea LED e nang le Motorized Trolley Cart |
1 |
|||
| Qala ka Potlako Tataiso  |
Pontšo ea LED
|
1 |
||
|
Lebokose la lisebelisoa |
1 Lebokose |
• Remote Control (E Ntsho)
x 1 • Remote Control (Silivera) x 1 • Liatlana tsa Anti-Static x 2 • Hex Tool x 2 (5 le 8 mm) • LAN Cable (5 m) x 1 • Thapo ea USB-C (3 m) x 1 • USB Flash Drive x 1 |
||
|
Motlakase oa Motlakase |
1 |
|||
|
Plug ke USA |
||||
| Phula
Sesebelisoa sa ho Suction |
1 | maemo (sehlopha sa A).
Leha ho le joalo, bokahohleng |
||
| T-Mofuta Wrench  |
adaptara e kenyelelitsoe. |
HLOKOMELA
- Sehlahisoa sena se phuthetsoe ka lebokoseng la lipalangoang tsa moea.
- Ka lebaka la boholo le boima ba eona, ho khothalletsoa hore batho ba babeli kapa ho feta ba e tšoare.
Litekanyo tsa 'Mele bakeng sa Letoto la LDS135
Sehlahisoa se Felletseview
Phanele e ka pele
Panele e ka morao
Sehlopha sa Taolo bakeng sa Koloi ea Trolley e nang le Motorized
Litaelo mabapi le Preset Lifting Height
- Bophahamo ba ho phahamisa ba pele: Lihlopha tse tharo tsa data tse seng li setiloe. Linotlolo tsa 1/2/3 (. , .. , ...) li lumellana le bolelele ba 0 cm / 25 cm / 65 cm ka ho latellana.
- Ho hlakoloa ha data ea bolelele bo behiloeng esale pele: Lintlha tsa bophahamo li ka bolokoa ho feta lilemo tse 10. Ha li-parameter tse ncha li setiloe, li-parameter tsa khale li tla hlakoloa ka bo eona.
- Mokhoa oa ho seta bolelele: ka bophahamo bofe kapa bofe (ha bo fumanehe tlasa maemo a reset le phoso), liparamente tsa bophahamo ba hajoale li ka hlophisoa esale pele ka linotlolo 1/2/3.
Bakeng sa mohlalaample, beha 25 cm ka konopo ea 2:
Tobetsa konopo ea S ho hlahisa "SET".
Ka metsotsoana e 2, pele "SET" e nyamela, tobetsa konopo ea 2 (..) .
Ha "S-2" e hlahisoa, litlhophiso li felile 'me li tla khutlela ponts'ong e fetileng.
Mokhoa oa ho Sebelisa Preset Height
Bophahameng bofe kapa bofe (ha bo fumanehe tlasa maemo a ho seta bocha le phoso), linotlolo tsa 1/2/3 li ka sebelisoa ho fihla bophahamong bo seng bo setiloe kapele. Haeba bophahamo ba hajoale bo fihlile bophahamong bo joalo, ha ho na liketso tse tla etsoa.
Mokhoa oa ho Fetola Bophahamo
- Sebelisa konopo ea "Holimo" ho phahamisa pontšo. Lift e tla ema ka bo eona ha e fihla moeling oa bophahamo. Ka kopo hlokomela, konopo ea "Up" ke "click to act", ke hore, ha o lokolla senotlolo lifte e ke ke ea emisa hang-hang. Ho e-na le hoo, e tla fokotsa lebelo le lekhutšoanyane ebe e emisa.
- Sebelisa konopo ea "Down" ho theola pontšo. Lift e tla ema ka bo eona ha e fihla moeling oa bophahamo. Ka kopo hlokomela, konopo ea "Down" ke konopo ea "click to act", ke hore, ha o lokolla senotlolo lifte e ke ke ea emisa hang-hang. Ho e-na le hoo, e tla fokotsa lebelo le lekhutšoanyane ebe e emisa.
Setšoantšo sa Schematic sa Likaroloana
Ho Sebetsa le ho Tsamaisa Maemo a Sefofane
Hlokomela
Nakong ea ho falla, ho sebetsana, ho beha le ho tsamaisa linyeoe tsa lifofane, kamehla u boloke boemo bo boletsoeng holimo, u se ke ua khutlisa, e le ho thibela ho phunya le ho senya sebopeho sa thepa le likarolo tsa pontšo.
- Pele o tsamaisa mokotla ofe kapa ofe oa sefofane, hula liloko tsa lirolara tse tšeletseng ka tlase, ho netefatsa ho lokolloa ha mariki.
- Etsa bonnete ba hore sehlopha se boemong bo lekanang, ka phapang ea bophahamo e ka tlase ho 1.5 cm, 'me mobu o ka tšoara ho feta boima ba thepa eohle.
- Nakong ea ho falla, bonyane ho hlokahala batho ba babeli ba baholo.
Hlokomela: Ha u boloka mokotla oa sefofane, etsa bonnete ba hore fatše ho lekana le hore lirolara tse tšeletseng kaofela li notletsoe.
Hlokomela: Bakeng sa litaelo tse qaqileng ka thepa, ka kopo sheba buka ea mosebedisi.
Ts'ebetso ea ho phutha
Ts'ebetso ea ho paka le ho ts'oara
Litlhaloso
| Ntho | Sehlopha | Litlhaloso |
|
Leseli la LED |
Mofuta | Ka ho toba View Pontšo ea LED |
| Boholo | 135” | |
| Sebaka sa Pontšo | 118.11” (H) x 66.44” (V)
3,000 mm (H) x 1,687.5 mm(V) |
|
| Pixel Pitch | 1.56 limilimithara | |
| Qeto | FHD, 1920 x 1080 | |
| Refresh Rate | ho fihlela ho 4440Hz | |
| Phapang karo-karolelano | 6000:1 (Tlhaloso) | |
| Khanya | 100-600 cd/m2 (maemo a 8 a liphetoho) | |
|
Pontšo ea ho kenya |
6 x HDMI (1920 x 1080 @ 60Hz, HDCP 2.2)
1 x LAN (RJ45) 3 x USB Mofuta oa A (2.0) 1 x USB Mofuta oa C (5V/2A) 1 x IR ka hare |
|
|
Sephetho sa Letshwao |
2 x HDMI (1080p @ 60Hz)
1 x Audio Out (3.5 mm) 3 x USB Type A (Matla) [5V/1.5A x 3] |
|
| Sephetho sa Sebui | 20W x 2 Harman Kardon Libui | |
|
Matla |
Moqtage |
100-120V/30A ~ 50/60Hz
220-240V/15A ~ 50Hz (e fapana ho ea ka linaha) |
|
Maemo a Tshebetso |
Mocheso | 32° F ho isa ho 104° F (0° C ho isa ho 40° C) |
| Mongobo | 20% ~ 80% e sa fokotseng | |
| Bophahamo | ≤ 6,562 ft (2,000 m) | |
|
Maemo a polokelo |
Mocheso | -4° F ho isa ho 140° F (-20° C ho isa ho 60° C) |
| Mongobo | 10% ~ 90% e sa fokotseng | |
| Bophahamo | ≤ 6,562 ft (2,000 m) | |
| Litekanyo tsa 'Mele (W x H x D) | 1,800~3,010 x 1,963~2,613 x 770 mm (70.87″~118.5” x 77.28″~102.87” x 30.31”) | |
| Boima ba 'mele | Ea nama | 253 lik'hilograma (564 lbs) |
|
Tšebeliso ea Matla |
On | 1200W (Tlwaelehileng) 2300W (Boholo) |
| Robala | <0.5W | |
| E tima | <0W |
HLOKOMELA
Litlhaloso tsa sehlahisoa li ka fetoha ntle le tsebiso.
Litokomane / Lisebelisoa
 |
ViewSonic LDS135 letoto le tobileng View Sesebelisoa sa Tharollo ea Pontšo ea LED [pdf] Bukana ea Mosebelisi Letoto la LDS135, LDS135 Series Direct View LED Display Kit Tharollo, Direct View Sesebelisoa sa Tharollo ea Lebone la LED, View Sesebelisoa sa Tharollo ea Pontšo ea LED, Sesebelisoa sa Tharollo ea Pontšo ea LED, Sesebelisoa sa Tharollo sa Pontšo, Sesebelisoa sa Tharollo |