Lik'hamera tsa Analog tse phahameng

Litlhaloso

• Phetolelo ea Manual: V1.04
• Likarolo: Atometsa 'me u tsepamise maikutlo ho Taolo ea 2.1 PTZ, litlhophiso tsa Format ea Video, Litlhophiso tsa 485

Nalane ea Phetoho

Kea leboha ha u rekile. Haeba u na le lipotso, ka kopo u seke oa tsilatsila ho ikopanya le morekisi oa hau.

Boithorollo
Ha ho karolo ea bukana ena e lokelang ho kopitsoa, ​​ho hlahisoa hape, ho fetoleloa, kapa ho ajoa ka mokhoa ofe kapa ofe kapa ka mekhoa efe kapa efe ntle le tumello e ngotsoeng e tsoang ho Zhejiang Uni.view Technologies Co., Ltd (eo hamorao e tla bitsoa Uniview kapa rona). Litaba tse bukeng ea tataiso li ka fetoha ntle le tsebiso esale pele ka lebaka la ntlafatso ea mofuta oa sehlahisoa kapa mabaka a mang. Bukana ena ke ea litšupiso feela, 'me lipolelo, tlhahisoleseding, le likhothaletso tsohle tse bukeng ena li hlahisoa ntle le tiisetso ea mofuta ofe kapa ofe. Ho isa tekanyong e lumelletsoeng ke molao o sebetsang, ha ho ketsahalo e tla Uniview ho jara boikarabello bakeng sa litšenyehelo tse khethehileng, tse sa lebelloang, tse sa tobang, kapa tsa tahlehelo ea phaello, data le litokomane

Litaelo tsa Tšireletseho

Etsa bonnete ba hore u bala bukana ena ka hloko pele u e sebelisa 'me u latele bukana ena ka botlalo nakong ea ts'ebetso. Lits'oants'o tse bukeng ena ke tsa litšupiso feela 'me li ka fapana ho latela mofuta kapa mofuta. Lits'oants'o tse bukeng ena li ka be li entsoe ho fihlela litlhoko tse ikhethileng le likhetho tsa basebelisi. Ka lebaka leo, ba bang ba examplintlha le mesebetsi e hlahang li ka fapana ho tse bonts'itsoeng mochining oa hau.

• Bukana ena e reretsoe mefuta e mengata ea lihlahisoa, 'me linepe, litšoantšo, litlhaloso, joalo-joalo, bukeng ena li ka fapana le ponahalo ea sebele, mesebetsi, likarolo, joalo-joalo, tsa sehlahisoa.
• Uniview e na le tokelo ea ho fetola tlhahisoleseding efe kapa efe e bukeng ena ntle le tsebiso kapa pontšo pele.
• Ka lebaka la lintho tse sa tsitsang tse kang tikoloho ea tikoloho, ho ka 'na ha e-ba le liphapang pakeng tsa boleng ba sebele le litekanyetso tse fanoeng bukeng ena. Tokelo ea ho qetela ea ho toloka e lula k'hamphaning ea rona.
• Basebelisi ba ikarabella ka botlalo bakeng sa ts'enyehelo le tahlehelo e hlahang ka lebaka la ts'ebetso e sa lokelang.

Tšireletso ea Tikoloho
Sehlahisoa sena se etselitsoe ho latela litlhoko tsa ts'ireletso ea tikoloho. Bakeng sa polokelo e nepahetseng, tšebeliso, le ho lahloa ha sehlahisoa sena, melao le melawana ea naha e tlameha ho hlokomeloa.

Matšoao a Tšireletseho
Matšoao a lethathamong le latelang a ka fumanoa bukeng ena. Latela ka hloko litaelo tse bontšitsoeng ke matšoao ho qoba maemo a kotsi le ho sebelisa sehlahisoa ka nepo.y

HLOKOMELA

• Pontšo ea skrineng le ts'ebetso li ka fapana ho ea ka DVR eo khamera ea analoge e hokahaneng ho eona.
• Likahare tsa bukana ena li bonts'itsoe ho latela Uniview DVR.

E qalang

Hokela sehokelo sa video sa khamera ea analoge ho DVR. Ha video e hlaha, u ka tsoela pele ho ea liketsong tse latelang.

Laola Ts'ebetso
Khetha Taolo ea PTZ kapa Menu ea OSD ho etsa ts'ebetso. Bukana ena e nka PTZ Control e le example.

Taolo ea PTZ
Khetha Taolo ea PTZ mme leqephe la taolo le tla hlaha.

Li-button tse loketseng li hlalositsoe ka tlase.

Taolo ea Menu ea OSD
Khetha Taolo ea Menu ea OSD 'me leqephe la taolo le tla hlahisoa.

• Khetha lintho tsa menu boemong bo tšoanang.
• Khetha boleng kapa mokhoa oa ho fetola.
• Bula menu ea OSthe D; kenya sub-menu; netefatsa boemo.
• Khutlela ho menu e kholo.

Tlhophiso ea Parameter

Main menu
Tobetsa Lethathamo la OSD le hlahang.

HLOKOMELA
Lethathamo la OSD le itsoella pele haeba ho se na mosebelisi ka mor'a metsotso e 2.

Sebopeho sa Video
Beha mokhoa oa phetiso, tharollo, le sekhahla sa foreimi bakeng sa video ea analoge.

1. Ho menu e kholo, tobetsa ho khetha Video Format, tobetsa . Leqephe la sebopeho sa video lea hlaha.
2. Tobetsa ho fetola lintho, tobetsa ho seta sebopeho sa video
   HLOKOMELA: Bakeng sa lik'hamera tse nang le li-switches tsa DIP mohatleng oa mohatla, u ka sebelisa li-switches tsa DIP ho fetola mokhoa oa video.
   TVI: Boemo ba kamehla, bo fanang ka ho hlaka ho hoholo.
   AHD: E fana ka sebaka se selelele sa phetiso le ho lumellana ho phahameng.
   CVI: Sebaka se hlakileng le sa phetisetso lipakeng tsa TVI le AHD.
   CVBS: Mokhoa oa pele, o fanang ka boleng bo fokolang ba setšoantšo, ho kenyeletsoa PAL le NTSC.
3. Kgetha BOLOKA LE HO QALA BOSHA, tobetsa ho boloka li-setting, le ho qala sesebelisoa bocha.

Litlhophiso tsa Litšoantšo

Mokhoa oa ho hlahisa maikutlo
Fetola mokhoa oa ho pepeseha ho fihlela boleng ba setšoantšo bo lakatsehang.

1. Ho menu e kholo, tobetsa ho khetha MOKHOA OA TŠEBELETSO, tobetsa . Leqephe la EXPOSURE MODE le tla hlaha.
2. Tobetsa ho khetha EXPOSURE MODE, ebe o tobetsa ho kgetha mokgwa wa ho pepeseha.
   
3. Haeba maqhubu a motlakase e se makgetlo a mangata a kgahlamelo mothalong o mong le o mong wa senepe, ho hlaha maqhutsu kapa difilimi senepeng. O ka rarolla bothata bona ka ho nolofalletsa ANTI-FLICKER. Tobetsa ho khetha ANTI-FLICKER, ebe o tobetsa ho khetha maqhubu a matla.
   HLOKOMELA Flicker e bua ka liketsahalo tse latelang tse bakoang ke phapang ea matla a fumanoang ke lipikselse tsa mohala o mong le o mong oa kutlo.
   Ho na le phapang e kholo ea khanya lipakeng tsa mela e fapaneng ea foreimi e le 'ngoe ea setšoantšo, e bakang mela e khanyang le e lefifi.
   Ho na le phapang e kholo ea khanya meleng e tšoanang pakeng tsa liforeimi tse fapaneng tsa litšoantšo, e bakang libopeho tse hlakileng.
   Ho na le phapang e kholo ho khanya ka kakaretso lipakeng tsa liforeimi tse latellanang tsa litšoantšo.
4. Tobetsa ho khetha BACK, tobetsa ho tsoa leqepheng,e le ho khutlela ho menu ea OSD.
5. Tobetsa ho khetha BOLOKA LE HO TSOA, tobetsa ho boloka li-setting, le ho tsoa ho menu ea OSD.

Motšehare / Bosiu Switch
Sebelisa switch ea bosiu ho bonesa kapa ho tima lebone la IR ho ntlafatsa boleng ba setšoantšo.
HLOKOMELA Karolo ena e sebetsa feela ho lik'hamera tsa IR.

1. Ho menu e kholo, tobetsa ho khetha TSHINTHO YA LETSATSI/BOSIU, tobetsa . Leqephe la DAY/NIGHT SITCH le hlahisoa.
   
2. Tobetsa , 'me u khethe mokhoa oa ho fetola bosiu bosiu.
   
3. Tobetsa ho khetha BACK, tobetsa ho tsoa leqepheng, le ho khutlela ho menu ea OSD.
4. Tobetsa ho khetha BOLOKA LE HO TSOA, tobetsa ho boloka li-setting, le ho tsoa ho menu ea OSD.

Taolo ea Leseli
HLOKOMELA: Karolo ena e sebetsa feela ho lik'hamera tsa mebala e felletseng.

1. Ho menu e kholo, tobetsa ho khetha TAolo ea LIGHT, tobetsa . Leqephe la LIGHT CONTROL le hlaha.
   
2. Tobetsa , ebe u khetha mokhoa oa ho laola leseli.
   
3. Tobetsa ho khetha BACK, tobetsa ho tsoa leqepheng, le ho khutlela ho menu ea OSD.
4. Tobetsa ho khetha BOLOKA LE HO TSOA, tobetsa ho boloka li-setting, le ho tsoa ho menu ea OSD.

Litlhophiso tsa Video

1. Ho menu e kholo, tobetsa ho khetha LITLHAKISO TSA VIDEO, tobetsa . Leqephe la VIDEO SETTINGS le a hlaha.
   
2. Beha li-parameter tsa video.
   
   
3. Tobetsa ho khetha BACK, tobetsa ho tsoa ho pa get t, 'me u khutlele ho menu ea OSD.
4. Tobetsa ho khetha BOLOKA LE HO TSOA, tobetsa ho boloka litlhophiso, le ho tsoa ho menu ea OSD.

485 Di-setting
HLOKOMELA: Kamora ho qeta li-setting tsa 485, khetha BOLOKA hore li-setting li tle li sebetse

1. Ho menu e kholo, tobetsa ho khetha 485 SETTINGS, ebe o tobetsa . Leqephe la 485 SETTINGS le a hlaha.
2. Beha mekhahlelo.
   
3. Tobetsa ho khetha BOLOKA, tobetsa ho khetha BOLOKA, ebe o tobetsa ho tiisa.

Taolo ea PTZ
Ts'ebetso ena e fumaneha feela bakeng sa lik'hamera tsa PTZ.
HLOKOMELA: Ka mor'a hore u qete li-setting tsa PTZ, khetha BOLOKA hore li-setting li tle li sebetse.

Seta pele
Maemo a seng a setilwe (setetsweng pele bakeng sa bokgutshwane) se bolokilwe view e sebedisoang ho tsamaisa kh'amera ea PTZ kapele ho ea sebakeng se itseng. Ho fihlela ho li-preset tse 32 li lumelletsoe.

Kenya Preset

1. Ho menu e kholo, tobetsa ho khetha EXand IT, ebe o tobetsa ho tsoa ho menu.
2. Sebelisa PTZ Control ho potoloha tsela ea khamera.
3. Tobetsa ho ea leqepheng la menu.
4. Tobetsa ho khetha PTZ CONTROL, ebe o tobetsa . Leqephe la PTZ CONTROL le a hlaha.
   
5. Tobetsa ho khetha PRESET, ebe o tobetsa . Leqephe la PRESET lea hlaha.
   
6. Tobetsa ho kgetha nomoro e seng e setilwe.
7. Tobetsa ho khetha SET, ebe o tobetsa ho netefatsa di-setting.
8. Tobetsa ho khetha BOLOKA, ebe o tobetsa ho boloka li-setting.

Letsetsa Preset

1. Ho menu e kholo, tobetsa ho khetha PTZ CONTROL, ebe o tobetsa . Leqephe la PTZ CONTROL le a hlaha.
2. Tobetsa ho khetha PRESET, ebe o tobetsa . Leqephe la PRESET lea hlaha.
3. Tobetsa ho kgetha nomoro e seng e setilwe.
4. Tobetsa ho khetha CALL, ebe o tobetsa ho ya sebakeng se seng.

Hlakola Preset

1. Ho menu e kholo, tobetsa ho khetha PTZ CONTROL, ebe o tobetsa . Leqephe la PTZ CONTROL le a hlaha.
2. Tobetsa ho khetha PRESET, ebe o tobetsa . Leqephe la PRESET lea hlaha.
3. Tobetsa ho kgetha nomoro e seng e setilwe.
4. Tobetsa ho khetha DELETE, ebe o tobetsa .
5. Tobetsa ho khetha BOLOKA, ebe o tobetsa ho phumula se seng se kgethilweng.

Boemo ba lapeng
Khamera ea PTZ e ka sebetsa ka bo eona joalo ka ha e hlophisitsoe (mohlala, ea sebakeng se seng se setiloe) haeba ho se na ts'ebetso e etsoang ka nako e behiloeng.
HLOKOMELA: Pele o sebelisoa, o hloka ho eketsa seta esale pele.

1. . Ho menu e kholo, tobetsa ho khetha PTZ CONTROL, ebe o tobetsa
2. Tobetsa ho khetha HOME POSITION, ebe o tobetsa . Ho hlaha leqephe la HOME POSITION.
   
3. Tobetsa ho khetha HOME POSITION, ebe o tobetsa ho kgetha ON.
4. Tobetsa ho khetha IDLE STATE, ebe o tobetsa ho beha nako e sa sebetseng. Mefuta e tlohang ho 1s ho isa ho 720s.
   HLOKOMELA: Ho seta seta esale pele, ka kopo eketsa nako ea ho se sebetse ka nepo kapa o tima boemo ba lapeng.
5. Tobetsa ho khetha MODE, ebe o tobetsa ho khetha PRESET.
6. Tobetsa ho khetha NO., ebe o tobetsa ho kgetha nomoro e seng e setilwe.
7. Kamora hore o fetole litlhophiso, SAVE e tla hlaha leqepheng, tobetsa ho khetha BOLOKA, ebe o tobetsa ho boloka li-setting.

PTZ Moeli
Sefa lits'oants'o tse sa batleheng ka ho fokotsa ho sisinyeha ha pan le ho sekama.
HLOKOMELA: Moeli oa PTZ o tingoa ke kamehla. Litlhophiso li ke ke tsa sebetsa ka mor'a hore sesebelisoa se qale ho qala hape.

1. Ho menu e kholo, tobetsa ho khetha PTZ CONTROL, ebe o tobetsa .
2. Tobetsa ho khetha PTZ LIMIT, ebe o tobetsa ho khetha HO TLOHELA, HO LE LETSATSI, HO LENG, HO HOLIMO, kapa KA TLASE.
3. Tobetsa ho khetha BOLOKA, ebe o tobetsa ho boloka li-setting. Litlhophiso li ke ke tsa sebetsa ka mor'a hore sesebelisoa se qale ho qala hape.

PTZ lebelo
Beha lebelo la ho laola PTZ ka bowena. Ha e ame lebelo la PTZ Calibration, Preset Calling, Home Position, joalo-joalo.

1. Ho menu e kholo, tobetsa ho khetha PTZ CONTROL, ebe o tobetsa .
2. Tobetsa ho khetha PTZ SPEED, ebe o tobetsa ho lokisa lebelo. Lebelo: ke ho tloha ho 1 ho ea ho 3. Ea kamehla ke 2. Ha boleng bo phahame, lebelo le potlakile.
3. Tobetsa ho khetha BOLOKA, ebe o tobetsa ho boloka li-setting.

Tlosa Memori
Sistimi e tlaleha boemo ba ho qetela ba PTZ haeba ho ka ba le ho hloleha ha matla. Ts'ebetso ena e lumelletsoe ke kamehla.

1. Ho menu e kholo, tobetsa ho khetha PTZ CONTROL, ebe o tobetsa .
2. Tobetsa ho khetha POWER OFF MEMORY, ebe o tobetsa ho beha nako. U ka khetha 10s, 30s, 60s, 180s, le 300s. Ntho ea kamehla ke 180s.
   HLOKOMELA: Bakeng sa mohlalaample, haeba u e beha ho 30s, sistimi e ka rekota boemo ba ho qetela moo sesebelisoa se sa potoloheng ho feta 30s pele ho felloa ke matla.
3. Tobetsa ho khetha BOLOKA, ebe o tobetsa ho boloka li-setting.

Tekanyo ea PTZ
Sheba hore na PTZ zero point offset ke efe 'me u etse calibration.

1. Ho menu e kholo, tobetsa ho khetha PTZ CONTROL, ebe o tobetsa
2. Tobetsa ho khetha PTZ CALIBRATION, ebe o tobetsa . Khamera ea PTZ
   e tla etsa tokiso hang hang.
   HLOKOMELA: Lethathamo la likhakanyo tsa PTZ li ipapisitse le lintlha tsa moeli oa sesebelisoa. Kamora ho lekanya, kh'amera ea PTZ e tla khutlela Boemong ba Lehae haeba ho hlokahala. Haeba e sa sebetse, e tla khutlela boemong ba Memori ea ho tima.

Puo
Khetha puo eo u e batlang ha ho hlokahala.

1. Ho menu e kholo, tobetsa ho khetha LANGUAGE, ebe o tobetsa ho kgetha puo e batloang.
   
2. Tobetsa ho khetha BOLOKA LE HO TSOA, tobetsa ho boloka li-setting, le ho tsoa ho menu ea OSD.

Mesebetsi e tsoetseng pele

View lintlha tsa mofuta oa firmware.

1. Ho menu e kholo, tobetsa ho khetha TSOHLE, 'me u tobetseLeqephe la ADVANCED le hlahisoa.
   
2. Beha mekhahlelo.
   
3. Tobetsa ho khetha BACK, tobetsa ho tsoa leqepheng, le ho khutlela ho menu ea OSD.
4. Tobetsa ho khetha BOLOKA LE HO TSOA, tobetsa ho boloka li-setting, le ho tsoa ho menu ea OSD.

Khutlisa Defaults

Khutlisa litlhophiso tsa kamehla tsa li-parameter tsohle tsa sebopeho sa hajoale sa video ntle le sebopeho sa video, switch mode, puo, audio, li-setting tsa 485, le taolo ea PTZ.

1. Ho menu e kholo, tobetsa ho khetha RESTORE DEFAULTS, tobetsa. Leqephe la RESTORE DEFAULTS le hlaha.
   
2. Tobetsa ho khetha YES ebe o tobetsa ho khutlisetsa litlhophiso tsohle tsa fomete ea hajoale ea video hore e se ke ea hlola e e-ba teng, kapa tobetsa ho khetha NO ebe o tobetsa ho hlakola ts'ebetso.

Etsoa
Ho menu e kholo, tobetsa ho khetha EXIad, ebe o tobetsa ho tsoa ho menu ea OSD ntle le ho boloka liphetoho leha e le life.

FAQs

P: Ke lokela ho etsa eng ha ke kopana le mathata ka ho atametsa kapa ho tsepamisa maikutlo litlhophiso?
K: Haeba u ba le mathata ka ho atametsa kapa ho tsepamisa maikutlo, etsa bonnete ba hore khamera e hokahane hantle 'me u leke ho lokisa li-setting hape. Haeba mathata a ntse a tsoela pele, ikopanye le tšehetso ea bareki bakeng sa thuso.

Litokomane / Lisebelisoa

Uniview Lik'hamera tsa Analog tse phahameng [pdf] Litaelo Lik'hamera tsa Analog tse phahameng, lik'hamera tsa Analog tsa Resolution, lik'hamera tsa Analog, lik'hamera

Litšupiso

• Bukana ea Mosebelisi