Uni-I/O™ Wide modules
UID-W1616R Uni-I O Wide modules
Bukana ea Mosebelisi
UID-W1616R, UID-W1616T
Uni-I/O™ Wide ke lelapa la li-module tsa Input/Output tse tsamaellanang le sethala sa taolo sa UniStream™. Li-module tse pharaletseng li bophara ba makhetlo a 1.5 ho feta li-module tsa Uni-I/O™, 'me li na le lintlha tse ngata tsa I/O sebakeng se senyenyane.
Tataiso ena e fana ka lintlha tsa mantlha tsa ho kenya li-module tsa UID-W1616R le UID-W1616T UniI/O™.
Litlhaloso tsa tekheniki li ka khoasolloa ho Unitronics websebaka.
Sethala sa UniStream ™ se na le balaoli ba CPU, liphanele tsa HMI, le li-module tsa I/O tsa lehae tse kopanang ho theha All-in-one Programmable Logic Controller (PLC).
Kenya likarolo tsa Uni-I/O™:
- Ka morao ho UniStream™ HMI Panel efe kapa efe e nang le CPU-for-Panel.
- Ho kena seporong sa DIN, u sebelisa Setsi sa Katoloso ea Sebaka.
Palo e phahameng ea li-module tsa Uni-I/O™ Wide tse ka hokahantsoeng ho molaoli a le mong oa CPU e lekantsoe. Bakeng sa lintlha, ka kopo sheba maqephe a boletsoeng a UniStream™ CPU kapa leha e le efe ea lisebelisoa tsa Katoloso ea Lehae.
Pele O Qala
Pele o kenya sesebelisoa, installer e tlameha ho:
- Bala le ho utloisisa tokomane ena.
- Netefatsa Litaba tsa Kit.
Litlhoko tsa khetho ea ho kenya
Haeba u kenya mojule oa Uni-I/O™ ho:
- Phanele ea UniStream™ HMI; Panel e tlameha ho ba le CPU-for-Panel, e kentsoeng ho latela tataiso ea ho kenya CPU-for-Panel.
- A DIN-seporo; o tlameha ho sebelisa Local Expansion Kit, e fumanehang ka tatellano e arohaneng, ho kopanya li-module tsa Uni-I/O™ ho DIN-rail ho sistimi ea taolo ea UniStream™.
Matshwao a Tlhokomediso le Dithibelo tse Akaretsang
Ha leha e le efe ea matšoao a latelang a hlaha, bala lintlha tse amanang le tsona ka hloko.
| Letšoao | Tlhaloso | Tlhaloso |
 |
Kotsi | Kotsi e boletsoeng e baka tšenyo ea 'mele le thepa. |
 |
Tlhokomediso | Kotsi e boletsoeng e ka baka tšenyo ea 'mele le thepa. |
| Tlhokomeliso | Tlhokomeliso | E-ba hlokolosi. |
- Tsohle exampli-les le litšoantšo li reretsoe ho thusa ho utloisisa, 'me ha li fane ka tiiso ea ts'ebetso. Unitronics ha e amohele boikarabello bakeng sa ts'ebeliso ea 'nete ea sehlahisoa sena ho latela li-examples.
UID-W1616R, UID-W1616T Tataiso ea ho Kena
- Ka kopo, lahla sehlahisoa sena ho latela maemo le melaoana ea lehae le ea naha.
- Sehlahisoa sena se lokela ho kenngoa feela ke basebetsi ba tšoanelehang.
- Ho hloleha ho latela ditataiso tse nepahetseng tsa polokeho ho ka baka kotsi e mpe kapa tshenyo ya thepa.
- Se ke oa leka ho sebelisa sesebelisoa sena se nang le liparamente tse fetang maemo a lumelletsoeng.
- Se ke oa hokela/hakolla sesebelisoa ha motlakase o buletsoe.
Mehopolo ea Tikoloho
- Moea: 10mm (0.4”) ea sebaka ea hlokahala lipakeng tsa lisebelisoa tse kaholimo/ka tlase le mabota a kampetsoeng.
- Se ke oa kenya libakeng tse nang le: lerōle le feteletseng kapa le nang le mocheso o mongata, khase e senyang kapa e tukang, mongobo kapa pula, mocheso o feteletseng, ts'oaetso ea kamehla kapa ho sisinyeha ho feteletseng, ho latela maemo le mefokolo e fanoeng letlapeng la lintlha tsa tekheniki tsa sehlahisoa.
- U se ke ua kenya metsi kapa ua lumella metsi hore a lutlele holim'a yuniti.
- Se ke oa lumella litšila ho oela ka har'a yuniti nakong ea ho kenya.
- Kenya bohole bo boholo ho tloha ho high-voltaglithapo tsa e le lisebelisoa tsa motlakase.
Litaba tsa Kit
- 1 Uni-I/O™ module
- Li-terminal blocks tse 4 tsa I/O (2 tse ntšo le tse 2 tse bohlooho)
Setšoantšo sa Uni-I/O™
| 1 | Dikotwana tsa DIN-rail | Fana ka tšehetso ea 'mele bakeng sa CPU le li-module. Ho na le likotoana tse peli: e 'ngoe ka holimo (e bontšitsoeng), e 'ngoe e ka tlase (e sa bonts'itsoeng). |
| 2 | Ke / Os | Lintlha tsa khokahano ea I/O |
| 3 | ||
| 4 | I/O Bese – Ka ho le letshehadi | Sehokedi sa lehlakore le letshehadi |
| 5 | Sehokelo sa libese | Tsamaisa Senotlolo sa Sehokelo sa Bese ka ho le letšehali, ho hokela motlakase |
| Notlela | Uni-I/OTM module ho CPU kapa mojule o haufi. | |
| 6 | I/O Bese - Ka ho le letona | Sehokelo sa Lehlakore le Le letona, se rometsoe se koahetsoe. Tloha ho koaheloa ha ho se joalo |
| Sehokelo sa libese | e sebetsang. | |
| Sekoahelo | ||
| 7 | Ke / Os | Lintlha tsa khokahano ea I/O |
| 8 | ||
| 9 | Li-LED tsa I/O | Li-LED tse tala |
| 10 | ||
| 11 | Boemo ba LED | Tricolor LED, Green / Red / Orange |
| HLOKOMELA | • Sheba leqephe la lintlha tsa module bakeng sa matšoao a LED. | |
| 12 | Monyako oa module | E rometsoe ka sekepe e koahetsoeng ka theipi e sireletsang ho thibela lemati hore le se ke la ngolisoa. Tlosa tepi nakong ea ho kenya. |
| 13 | Screw masoba | Lumella ho kenya liphanele; bophara ba lesoba: 4mm (0.15 ″). |
Mabapi le Lihokelo tsa Libese tsa I/O
Lihokelo tsa Libese tsa I/O li fana ka lintlha tsa khokahano ea 'mele le ea motlakase lipakeng tsa li-module. Sehokelo se romelloa se koahetsoe ke sekoaelo se sireletsang, se sireletsang sehokelo ho litšila, tšenyo le ESD.
Bese ea I/O - Ka ho le letšehali (#4 setšoantšong) e ka hokeloa ho CPU-for-Panel, module ea Uni-COM™ ea Puisano, ho module e 'ngoe ea Uni-I/O™ kapa Karolong ea Bofelo ea Sebaka sa Lehae. Katoloso Kit.
Bese ea I/O - Ka ho le letona (#6 setšoantšong) e ka hokahanngoa le mojule o mong oa I/O, kapa ho Base Unit ea Local Expansion Kit.
Tlhokomeliso
- Haeba module ea I / O e fumaneha ho qetela ho tlhophiso, 'me ha ho letho le lokelang ho hokahanngoa ho eona, u se ke ua tlosa Sekoahelo sa Sehokelo sa Bus.
Ho kenya
- Tima matla a sistimi pele o hokela kapa o hakolla li-module kapa lisebelisoa life kapa life.
- Sebelisa litemoso tse nepahetseng ho thibela Electro-Static Discharge (ESD).
Ho kenya Uni-I/O™ Module ho UniStream™ HMI Panel
HLOKOMELA
Sebopeho sa mofuta oa DIN-rail se ka morao ho phanele se fana ka tšehetso ea 'mele bakeng sa mojule oa Uni-I/O™.
- Sheba yuniti eo o tla hokela mojule wa Uni-I/O™ ho netefatsa hore Sehokelo sa yona sa Mabese ha se a kenngwa. Haeba mojule oa Uni-I/O™ e tla ba oa ho qetela tlhophisong, u se ke oa tlosa sekoaelo sa Sehokelo sa Libese sa I/O - Ka ho le letona.
- Bula lemati la mojule oa UniI/O™ ebe o o tšoara joalokaha ho bontšitsoe setšoantšong se tsamaeang le sena.
- Sebelisa lithanele tse tataisang tse ka holimo le tse tlase (leleme & groove) ho thellela mojule oa UniI/O™ madulong.
- Netefatsa hore dikotwana tsa DIN-rail tse ka hodimo le ka tlase ho mojule wa Uni-I/O™ di kene DIN-rail.
- Tsamaisa Sehokahanyi sa Libese ho ea fihla ka ho le letšehali joalokaha ho bontšitsoe setšoantšong se tsamaeang le sehlooho sena.
- Haeba ho se ho ntse ho e-na le mojule o ka letsohong le letona la oona, tlatsa khokahanyo ka ho thellisa senotlolo sa Bus Connector sa yuniti e haufi le ho le letšehali.
- Haeba mojule e le oa ho qetela tlhophisong, tlohela sehokelo sa libese sa I/O se koahetsoe.
Ho tlosa Module
- Tlosa matla a tsamaiso.
- Hakolla litheminale tsa I/O (#2,3,7,8 setšoantšong).
- Hakolla mojule oa Uni-I/O™ yuniti e haufi: thellela Lock ea Sehokelo sa Libese ho ea ka ho le letona. Haeba ho na le yuniti e ka letsohong la eona le letona, thellela senotlolo sa mojule ona ka ho le letona hape.
- Mojulung oa Uni-I/O™, hulela sekotwana se kaholimo sa DIN-rail 'me sekotwana se tlase tlase.
- Bula lemati la mojule oa Uni-I/O™ ebe u o tšoara ka menoana e ’meli joalokaha ho bontšitsoe setšoantšong se leqepheng la 3; ebe u e hula ka hloko sebakeng sa eona.
Ho kenya li-module tsa Uni-I/O™ ho DIN-rail
Ho kenya limmojule ho DIN-rail, latela mehato ea 1-7 ho Instola Uni-I/O™ Module ho Panel ea UniStream™ HMI leqepheng la 3.
Bakeng sa ho hokela li-module ho molaoli oa UniStream™, o tlameha ho sebelisa Kit ea Katoloso ea Lehae.
Li-kits tsena li fumaneha ka lisebelisoa tsa motlakase le ntle le tsona, hape li na le likhoele tsa bolelele bo fapaneng. Bakeng sa tlhaiso-leseling e felletseng, ka kopo sheba tataiso ea ho instola ea Setsi sa Katoloso ea Lehae.
Linomoro tsa Modules
O ka nomora li-module bakeng sa merero ea litšupiso. Sehlopha sa listikara tse 20 se fanoa ka CPU-for-Panel e 'ngoe le e 'ngoe; sebelisa li-stickers tsena ho nomora limmojule.
- Sehlopha se na le lithupa tse nang le linomoro le tse se nang letho joalokaha ho bontšitsoe setšoantšong se ka letsohong le letšehali.
- Li behe holim'a li-module joalokaha ho bontšitsoe setšoantšong se ka ho le letona.
UL Compliance
Karolo e latelang e amana le lihlahisoa tsa Unitronics tse thathamisitsoeng le UL.
Mefuta e latelang: UID-W1616R ke UL e thathamisitsoeng bakeng sa Libaka tse Kotsi.
Mefuta e latelang: UID-W1616R, UID-W1616T ke UL e thathamisitsoeng bakeng sa Sebaka se Tloaelehileng.
Litekanyetso tsa UL, Balaoli ba Rerang ho Sebelisa Libakeng tse Kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D
Lintlha tsena tsa Tokollo li amana le lihlahisoa tsohle tsa Unitronics tse nang le matšoao a UL a sebelisoang ho tšoaea lihlahisoa tse lumelletsoeng ho sebelisoa libakeng tse kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D.
Tlhokomeliso
- Thepa ena e loketse ho sebelisoa ho Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D, kapa libakeng tse seng kotsi feela.
- Lithapo tsa ho kenya le tse tsoang li tlameha ho tsamaellana le mekhoa ea likhoele tsa Sehlopha sa I, Karolo ea 2 le ho latela bolaoli bo nang le matla a ho laola.
- TEMOSO—Ho phatloha Kotsi-ho nkela likarolo sebaka ho ka sitisa ho tšoaneleha bakeng sa Sehlopha sa I, Karolo ea 2.
- TLHOKOMELO – KOTSI EA HO PHAHLOA – Se ke oa hokela kapa oa hakolla lisebelisoa ntle le haeba motlakase o tingoe kapa sebaka seo ho tsejoa hore ha se kotsi.
- TLHOKOMELO - Ho pepesetsoa lik'hemik'hale tse ling ho ka theola thepa ea tiiso ea thepa e sebelisoang ho Relays.
- Thepa ena e tlameha ho kengoa ho sebelisoa mekhoa ea likhoele joalo ka ha ho hlokahala bakeng sa Sehlopha sa I, Karolo ea 2 joalo ka NEC le/kapa CEC.
Wiring
- Thepa ena e etselitsoe ho sebetsa feela libakeng tsa SELV/PELV/Class 2/Limited Power.
- Lisebelisoa tsohle tsa motlakase tsamaisong li tlameha ho kenyelletsa ho pata habeli. Liphello tsa phepelo ea motlakase li tlameha ho lekanyetsoa joalo ka SELV/PELV/Class 2/Limited Power.
- Se ke oa hokela lets'oao la 'Neutral' kapa 'Mola' oa 110/220VAC ho ntlha ea 0V ea sesebelisoa.
- U se ke ua tšoara lithapo tse phelang.
- Mesebetsi eohle ea lithapo e lokela ho etsoa ha motlakase o TLOhile.
- Sebelisa tšireletso ea morao-rao, joalo ka fuse kapa sekhechana sa potoloho, ho qoba maqhubu a feteletseng ho koung ea phepelo ea module ea Uni-I/O™.
- Lintlha tse sa sebelisoeng ha lia lokela ho kopanngoa (ntle le haeba ho boletsoe ka tsela e 'ngoe). Ho iphapanyetsa taelo ena ho ka senya sesebelisoa.
- Lekola lithapo tsohle habeli pele o bulela phepelo ea motlakase.
Tlhokomeliso
- Ho qoba ho senya terata, sebelisa torque e kholo ea 0.5 N·m (5 kgf·cm).
- Se ke oa sebelisa thini, solder kapa ntho leha e le efe holim'a terata e hlobotseng e ka etsang hore khoele ea terata e khaohe.
- Kenya bohole bo boholo ho tloha ho high-voltaglithapo tsa e le lisebelisoa tsa motlakase.
Mokhoa oa ho Wiring
Sebelisa li-terminals tsa crimp bakeng sa wiring; sebelisa terata ea 26-12 AWG (0.13 mm2 -3.31 mm 2).
- Hlobola terata ho bolelele ba 7±0.5mm (0.250-0.300 inches).
- Hlakola theminale sebakeng sa yona se sephara ka ho fetisisa pele o kenya terata.
- Kenya terata ka botlalo ho theminale ho netefatsa hore ho na le khokahanyo e nepahetseng.
- Tiisa ho lekana hore terata e se ke ea hula ka bolokolohi.
Lintlha tsa Khokahano ea Uni-I/O™ Module
Litšoantšo tsohle tsa lithapo le litaelo tse tokomaneng ena li bua ka lintlha tsa khokahanyo tsa I/O tsa li-module tse fapaneng. Tsena li hlophisitsoe ka lihlopha tse 'nè tsa lintlha tse leshome le motso o mong, joalokaha ho bontšitsoe litšoantšong tse ka tlaase.
Litaelo tsa Wiring
Ho etsa bonnete ba hore sesebelisoa se tla sebetsa hantle le ho qoba tšitiso ea motlakase:
- Sebelisa khabinete ea tšepe. Etsa bonnete ba hore khabinete le mamati a eona li entsoe ka mobu hantle.
- Sebelisa lithapo tse boholo bo lekaneng bakeng sa mojaro.
- Tsamaisa lets'oao le leng le le leng la I/O ka terata ea eona e tloaelehileng. Hokela lithapo tse tloaelehileng libakeng tsa tsona tse tloaelehileng (CM) mojuleng oa I/O.
- Ka bomong hokela ntlha e 'ngoe le e' ngoe ea 0V tsamaisong le setsing sa motlakase sa 0V.
- Motho ka mong amahanya ntlha e 'ngoe le e' ngoe e sebetsang ea lefats'e () le lefats'e la tsamaiso (ka ho khetheha ho chassis ea tšepe ea tšepe). Sebelisa lithapo tse khutšoane le tse tenya ka ho fetesisa: bolelele bo ka tlase ho 1m (3.3'), botenya ba bonyane 14 AWG (2 mm2).
- Hokela phepelo ea motlakase 0V lefats'eng la sistimi.
HLOKOMELA
Bakeng sa tlhaiso-leseling e batsi, sheba tokomane ea Tsamaiso ea Wiring Guidelines, e fumanehang Laeboraring ea Tekheniki ho Unitronics' websebaka.
Ho kopanya lintho tse kenang: UID-W1616R, UID-W1616T
UID-W1616R
UID-W1616T
Litholoana li arotsoe ka lihlopha tse peli tse arohaneng:
- I0-I7 e arolelana CM0 e tloaelehileng
- I8-I15 e arolelana CM1 e tloaelehileng
Sehlopha se seng le se seng sa ho kenya se ka kenngoa ka lithapo joalo ka sinki kapa mohloli. Kopanya sehlopha ka seng ho latela lipalo tse ka tlase.
HLOKOMELA
- Sebelisa sink input wiring ho hokela sesebelisoa sa sourcing (pnp).
- Sebelisa terata ea mohloli ho hokela sesebelisoa se tebang (npn).
Liphello tsa ho fetisoa ha Wiring: UID-W1616R
Phepelo ea motlakase e tsoang
Liphetho tsa relay li hloka matla a kantle a 24VDC. Hokela liteishene tsa 24V le 0V joalo ka ha ho bontšitsoe setšoantšong se ka tlase.
- Ho qoba kotsi ea mollo kapa tšenyo ea thepa, kamehla sebelisa mohloli o lekanyelitsoeng oa hona joale kapa hokela sesebelisoa sa hona joale se fokotsang letoto le likhokahano tsa relay.
- 0V ea mojule e tlameha ho hokela ho 0V ea Phanele ea HMI. Ho iphapanyetsa taelo ena ho ka senya sesebelisoa.
- Ketsahalong ea voltage ho feto-fetoha kapa ho se lumellane le voltage lintlha tsa phepelo ea motlakase, hokela module ho phepelo ea motlakase e laoloang.
UID-W1616R
Litholoana li arotsoe ka lihlopha tse peli tse ikhethileng:
- O0-O7 e arolelana CM2 e tloaelehileng
- O8-O15 e arolelana CM3 e tloaelehileng
Kopanya sehlopha ka seng ho latela setšoantšo se tsamaeang le sehlooho.
Ho eketsa nako ea bophelo ba ho kopana
Ho eketsa nako ea bophelo ba mabitso a li-relay le ho sireletsa mojule ts'enyong e ka bang teng ka ho khutlisa EMF, hokela:
- le clamping diode ka ho tsamaisana le mojaro o mong le o mong oa inductive oa DC.
- potoloho ea snubber ea RC e tsamaisanang le mojaro o mong le o mong oa inductive oa AC.
Liphetho tsa Wiring Transistor: UID-W1616T
Phepelo ea motlakase e tsoang
Tšebeliso ea leha e le efe ea liphetho e hloka phepelo ea motlakase ea kantle ea 24VDC joalo ka ha ho bonts'itsoe setšoantšong se tsamaeang le sena.
Ketsahalong ea voltage ho feto-fetoha kapa ho se lumellane le voltage lintlha tsa phepelo ea motlakase, hokela sesebelisoa ho phepelo ea motlakase e laoloang.
Litholoana
Hokela liteishene tsa 24V le 0V joalo ka ha ho bontšitsoe setšoantšong se tsamaeang le sena.
UID-W1616T O0-O15 kabelo e tloaelehileng ea 0V
Litlhaloso tsa Tekheniki
| Karolo ea nomoro. | UID-W1616R |
UID-W1616T |
| Lintho tse kenang | 16 | 16 |
| Mofuta | Sink kapa Mohloli , 24VDC | Sink kapa Mohloli , 24VDC |
| Litholoana | 16 | 16 |
| Mofuta | Relay, 24VDC (phepelo ea motlakase) | Transistor, Mohloli (pnp), 24VDC |
| Ho behwa ka thoko | Lintho tsohle tse kenang le tse hlahisoang li arotsoe | |
| Lintho tse kenang | UID-W1616R |
UID-W1616T |
| Palo ea lisebelisoa | 16 | 16 |
| Mofuta | Sinki kapa Mohlodi | |
| Lihlopha tsa ho itšehla thajana | Lihlopha tse peli tsa lintlha tse 8 se seng le se seng | |
| Ho itšehla thajana voltage | ||
| Sehlopha ho ea bese | 500VAC bakeng sa motsotso o le mong | |
| Sehlopha ka sehlopha | 500VAC bakeng sa motsotso o le mong | |
| Kenya ho kenya ka har'a sehlopha | Ha ho letho | |
| Lebitso voltage | 24VDC @ 6mA | |
| Keletso voltage | ||
| Sink/Mohlodi | Boemong: 15-30VDC, 4mA bonyane ba Off state: 0-5VDC, 1mA maximum | |
| Impedans ka lebitso | 4kΩ | |
| Sefe | E hlophisitsoe lipakeng tsa 1 ho isa ho 32 ms (ka bonngoe ka sehlopha) | |
| Litholoana | UID-W1616R |
UID-W1616T |
| Palo ea liphetho | 16 | 16 |
| Mofuta oa tlhahiso | Relay, SPST-NO (Foromo A) | Transistor, Mohloli |
| Lihlopha tsa ho itšehla thajana | Lihlopha tse peli tsa liphetho tse 8 se seng le se seng | Sehlopha se le seng sa liphetho tse 16 |
| Ho itšehla thajana voltage | ||
| Sehlopha ho ea bese | 1,500VAC bakeng sa motsotso o le mong | 500VAC bakeng sa motsotso o le mong |
| Sehlopha ka sehlopha | 1,500VAC bakeng sa motsotso o le mong | – |
| Sehlahisoa se hlahisoang ka har'a sehlopha | Ha ho letho | Ha ho letho |
| Phepelo ea motlakase ho bese | Ha ho letho | 500VAC bakeng sa motsotso o le mong |
| Phepelo ea motlakase e tsoang ho tlhahiso | 1,500VAC bakeng sa motsotso o le mong | Ha ho letho |
| Hona joale | 2A palo e phahameng ka ho fetesisa 8A boholo ka sehlopha (Mojaro o hanyetsanang) | 0.5A boholo ba tlhahiso ka 'ngoe. |
| Moqtage | 250VAC / 30VDC boholo | Sheba lintlha tsa Outputs Power Supply |
| Moroalo o fokolang | 1mA, 5VDC | – |
| ON state voltaglerotholi | – | 0.5V boholo |
| OFF boemo ba ho lutla ha hona joale | – | 10µA palo e kahodimodimo |
| Linako tse fetohang | 10ms boholo | Ho bulela/tima: 80ms max. (Khanyetso ea mojaro <4kΩ( |
| Tšireletso ea nako e khutšoanyane | Ha ho letho | Ee |
| Tebello ya bophelo (6) | 100k ts'ebetso ka bongata bo boholo | – |
|
Phepelo ea Matla a Litholoana |
UID-W1616R |
UID-W1616T |
| Voltage | 24VDC | |
| Tshebetso voltage | 20.4 - 28.8VDC | |
| Boholo ba tšebeliso ea hona joale | 80mA @ 24VDC | 60mA @ 24VDC(7) |
|
IO/COM Bese |
UID-W1616R |
UID-W1616T |
| Ts'ebeliso e phahameng ea libese hajoale | 100mA | 120mA |
Lipontšo tsa LED
| Kenya li-LED | Botala | Boemo ba ho kenya | |
| Li-LED tsa tlhahiso | Botala | Boemo ba tlhahiso | |
| Boemo ba LED | LED e mebala e meraro. Lipontšo ke tse latelang: | ||
|
Mmala |
Naha ea LED |
Boemo |
|
| Botala | On | Ho sebetsa ka tlwaelo | |
| Ho panya butle | Bootsa | ||
| Ho panya ka potlako | Ho qala OS | ||
| Botala/Bokgubedu | Ho panya butle | Litlhophiso tse sa lumellaneng | |
| Khubedu | Ho panya butle | Ha ho phapanyetsano ea IO | |
| Ho panya ka potlako | Phoso ea puisano | ||
| namunu | Ho panya ka potlako | Ntlafatso ea OS | |
Tikoloho
| Tshireletso | IP20, NEMA1 |
| Mocheso oa ho sebetsa | -20°C ho isa ho 55°C (-4°F ho isa ho 131°F) |
| Mocheso oa polokelo | -30°C ho isa ho 70°C (-22°F ho isa ho 158°F) |
| Mongobo o Batlang (RH) | 5% ho isa ho 95% (ha e fokotsehe) |
| Bophahamo ba Tshebetso | 2,000m (6,562 ft) |
| Ho tshoha | IEC 60068-2-27, 15G, 11ms nako |
| Ho thothomela | IEC 60068-2-6, 5Hz ho 8.4Hz, 3.5mm kamehla amplitude, 8.4Hz ho isa ho 150Hz, ho potlakisa 1G. |
|
Litekanyo |
UID-W1616R |
UID-W1616T |
| Boima ba 'mele | 0.230 lik'hilograma (0.507 lb) | 0.226 lik'hilograma (0.498 lb) |
| Boholo | E ts'oana le mehlala eohle, joalo ka ha ho bonts'itsoe litšoantšong tse ka tlase | |
Lintlha
6. Nako e lebeletsoeng ea bophelo ba likhokahano tsa relay e ipapisitse le ts'ebeliso eo ba e sebelisang. Tataiso ea ho kenya sehlahisoa e fana ka mekhoa ea ho sebelisa likhokahano tse nang le likhoele tse telele kapa ka meroalo e kenang.
7. Tšebeliso ea hona joale ha e kenyeletse mojaro oa hona joale.
Lintlha tse tokomaneng ena li bontša lihlahisoa ka letsatsi la khatiso. Unitronics e na le tokelo, ho ipapisitsoe le melao eohle e sebetsang, ka nako efe kapa efe, ka boikhethelo ba eona, ntle le tsebiso, ea ho khaotsa kapa ho fetola likarolo, meralo, thepa le lintlha tse ling tsa lihlahisoa tsa eona, le ho hula ka ho sa feleng kapa ka nakoana. tse furallang mmarakeng.
Lintlha tsohle tse tokomaneng ena li fanoe ka "joalokaha li le" ntle le tiisetso ea mofuta ofe kapa ofe, e ka hlahisoang kapa e ka hlalosoang, ho kenyeletsoa empa e sa felle feela ho litiisetso leha e le life tse boleloang tsa thekiso, ho sebetsa ka morero o itseng, kapa ho se tlōle molao. Unitronics ha e nke boikarabello bakeng sa liphoso kapa lintho tse sieo boitsebisong bo hlahisitsoeng tokomaneng ena. Ha ho ketsahalo e tla ba le boikarabello bakeng sa litšenyehelo tse khethehileng, tse sa lebelloang, tse sa tobang kapa tsa litlamorao tsa mofuta ofe kapa ofe, kapa tšenyo efe kapa efe e hlahang kapa e amanang le ts'ebeliso kapa ts'ebetso ea tlhahisoleseling ena.
Mabitso a kgwebo, matshwao a kgwebo, matshwao a kgwebo, matshwao a ditshebeletso a hlahisitsweng tokomaneng ena, ho kenyeletswa le moetso wa ona, ke thepa ya Unitronics (1989) (R”G) Ltd. kapa batho ba bang ba boraro mme ha o a dumellwa ho di sebedisa ntle le tumello e ngotsweng pele. tsa Unitronics kapa motho e mong ea ka bang mong'a tsona
UG_UID-W1616T_R.pdf 09/22
Unitronics
Litokomane / Lisebelisoa
 |
Unitronics UID-W1616R Uni-I O Wide modules [pdf] Bukana ea Mosebelisi UID-W1616R, UID-W1616T, UID-W1616R Uni-I O Wide Modules, Uni-I O Wide Modules, Wide Module, Wide Modules |