DMX-024PRO molaoli oa seteishene
Ref. palo: 154.062

TAELO MOTSAMAI

Kea leboha ka theko ea khanya ena ea Beamz. Ka kopo bala bukana ena hantle pele u sebelisa yuniti molemong oa ho rua molemo ka botlalo linthong tsohle.
Bala bukana pele u sebelisa yuniti. Latela litaelo e le hore u se ke ua senya tiisetso. Nka mehato eohle ea ho itšireletsa ho qoba mollo le/kapa ts'okelo ea motlakase. Litokiso li tlameha ho etsoa feela ke setsebi se tšoanelehang e le ho qoba ho tsosoa ke motlakase. Boloka bukana eo u ka e sebelisang nakong e tlang.

• - Pele o sebelisa yuniti, ka kopo botsa keletso ho setsebi. Ha yuniti e butsoe ka lekhetlo la pele, monko o itseng o ka hlaha. Sena se tloaelehile 'me se tla nyamela ka mor'a nakoana.
• - Sehlopha se na le voltage jereng likarolo. Ka hona, SE KE UA bula matlo.
• – Se ke oa beha lintho tsa tšepe kapa ua tšela lintho tse metsi ka har'a yuniti Sena se ka baka tsitsipano ea motlakase le ho se sebetse hantle.
• - Se ke oa beha yuniti haufi le mehloli ea mocheso joalo ka li-radiator, joalo-joalo. Se ke oa beha yuniti sebakeng se thothomelang. U se ke ua koahela masoba a moea.
• – Yuniti ha e ea lokela ho sebelisoa kamehla.
• - Ela hloko ka li-main lead 'me u se ke oa e senya. Motlakase o nang le phoso kapa o senyehileng o ka baka tsitsipano ea motlakase le ho se sebetse hantle.
• - Ha o hula yuniti ho tsoa setsing se seholo, lula u hula plug, u se ke ua etella pele.
• - Se ke oa plug kapa oa ntša yuniti ka matsoho a metsi.
• - Haeba plug le / kapa mains lead li senyehile, li hloka ho nkeloa sebaka ke setsebi se tšoanelehang.
• - Haeba yuniti e senyehile hoo likarolo tse ka hare li bonahalang, U SE KE UA hokela yuniti ka har'a mochini o motlakase 'me U SE KE UA bulela yuniti. Ikopanye le morekisi oa hau. SE KE UA hokela yuniti ho rheostat kapa dimmer.
• - Ho qoba kotsi ea mollo le tšabo, u se ke ua pepesetsa yuniti ho pula le mongobo.
• - Litokiso tsohle li lokela ho etsoa ke setsebi se tšoanelehang feela.
• - Hokela yuniti sebakeng sa mantlha sa marang-rang (220240Vac/50Hz) se sirelelitsoeng ka fuse ea 10-16A.
• - Nakong ea sefefo sa lialuma kapa haeba yuniti e ke ke ea sebelisoa nako e telele, e tlose ho tsoa ho mains. Molao ke: E ntše plug ho tsoa ho mains ha e sa sebelisoe.
• - Haeba yuniti e sa sebelisoe nako e telele, condensation e ka hlaha. Lumella yuniti hore e fihle mocheso oa kamore pele u e bulela. Le ka mohla u se ke ua sebelisa yuniti ka likamoreng tse mongobo kapa ka ntle.
• - Nakong ea ts'ebetso, matlo a chesa haholo. Se ke oa e ama nakong ea ts'ebetso le hang kamora moo.
• - Ho thibela likotsi ho lik'hamphani, o tlameha ho latela litataiso tsa kopo mme o latele litaelo.
• - Sireletsa yuniti ka ketane e eketsehileng ea polokeho haeba yuniti e le holimo. Sebelisa sisteme ea truss ka clamps. Etsa bonnete ba hore ha ho motho ea emang sebakeng se hloahloa. Tšoaea phello bonyane 50cm hole le lintho tse chang habonolo 'me u siee sebaka sa mithara e le' ngoe ka mahlakore ohle ho netefatsa ho phola ho lekaneng.
• - Setsi sena se na le li-LED tse matla haholo. Se ke oa sheba lebone la LED ho thibela tšenyo mahlong a hau.
• - Se ke oa bulela le ho tima sesebelisoa khafetsa. Sena se khutsufatsa nako ea bophelo.
• – Boloka yuniti moo bana ba sa fihleng teng. Se ke oa siea yuniti e sa lebelloa.
• - Se ke oa sebelisa li-sprays tsa ho hloekisa ho hloekisa li-switches. Masalla a li-sprays tsena a baka lerōle le mafura. Tabeng ea ho se sebetse hantle, kamehla batla keletso ho setsebi.
• - Sebelisa sesebelisoa ka matsoho a hloekileng.
• – Se qobelle litaolo.
• - Haeba yuniti e oele, kamehla e hlahlojoe ke setsebi se tšoanelehang pele u bulela yuniti hape.
• - Se ke oa sebelisa lik'hemik'hale ho hloekisa yuniti. Ba senya varnish. Hloekisa yuniti feela ka lesela le omeletseng.
• - Qoba hole le lisebelisoa tsa elektroniki tse ka bakang tšitiso.
• - Sebelisa li-spares tsa pele feela bakeng sa tokiso, ho seng joalo tšenyo e kholo le/kapa mahlaseli a kotsi a ka hlaha.
• - Tlosa yuniti pele u e ntša ho tsoa ho mains le / kapa lisebelisoa tse ling. Hlakola likhoele tsohle le likhoele pele o tsamaisa yuniti.
• - Etsa bonnete ba hore lead lead e ke ke ea senyeha ha batho ba tsamaea holim'a eona. Sheba li-main lead pele o sebelisoa bakeng sa tšenyo le liphoso!
• – The mains voltage ke 220-240Vac/50Hz. Sheba hore na motlakase o tšoana. Haeba u tsamaea, etsa bonnete ba hore mains voltage ea naha e loketse yuniti ena.
• Boloka lisebelisoa tsa pele tsa ho paka hore o tle o tsebe ho tsamaisa thepa maemong a bolokehileng

Letšoao lena le hohela tlhokomelo ea mosebelisi ho ea holimotagtse teng ka hare ho ntlo le boholo bo lekaneng ho baka kotsi e tshosang.
Letšoao lena le hohela tlhokomelo ea mosebelisi litaelong tsa bohlokoa tse ka har'a bukana eo a lokelang ho e bala le ho e latela.
U SE KE UA Talimisisa ka ho toba LENENG. Sena se ka senya mahlo a hau. Batho ba hlaseloang ke lefu la sethoathoa ba lokela ho hlokomela litlamorao tseo khanya ena e ka bang le tsona ho bona.
Sehlopha se netefalitsoe ke CE. E thibetsoe ho etsa liphetoho leha e le life yuniti. Ba ne ba tla hlakola setifikeiti sa CE le tiiso ea bona!
HLOKOMELA: Ho etsa bonnete ba hore yuniti e tla sebetsa ka mokhoa o tloaelehileng, e tlameha ho sebelisoa ka likamoreng tse nang le mocheso o lipakeng tsa 5 ° C / 41 ° F le 35 ° C / 95 ° F.

Lihlahisoa tsa motlakase ha lia lokela ho kenngoa litšila tsa ntlo. Ka kopo, li tlise setsing sa ho li sebelisa hape. Botsa ba boholong sebakeng sa heno kapa morekisi oa hau mabapi le mokhoa oa ho tsoela pele. Litlhaloso li tloaelehile. Litekanyetso tsa 'nete li ka fetoha hanyane ho tloha ho yuniti e' ngoe ho ea ho e 'ngoe. Litlhaloso li ka fetoloa ntle le tsebiso pele.

PHAPALA TAELO

Tlhokomeliso! Hang hang ha o amohela sesebelisoa, notlolla ka hloko lebokose, lekola litaba ho netefatsa hore likarolo tsohle li teng, 'me li amohetsoe li le maemong a matle. Tsebisa motho ea tsamaisang thepa hang-hang 'me u boloke thepa ea ho paka hore e hlahlojoe haeba likarolo tse ling li bonahala li senyehile ka lebaka la thomello kapa sephutheloana ka bosona se bontša matšoao a ho se tsamaee hantle. Boloka sephutheloana le lisebelisoa tsohle tsa ho paka. Ketsahalong ea hore sesebelisoa se tlameha ho khutlisetsoa fekthering, ho bohlokoa hore sesebelisoa se khutlisoe ka lebokoseng la feme la pele le ho paka.

Haeba sesebelisoa se pepesehetse ho feto-fetoha ha mocheso ho matla (mohlala, ka mor'a ho tsamaea), u se ke ua se bulela hang-hang. Ho hlaha ha metsi a condensation ho ka senya sesebelisoa sa hau. Tlohela sesebelisoa se koetsoe ho fihlela mocheso o fihla.

PHEPELO EA MOTLAKASE

Lethathamong le ka morao la molaoli ho bonts'oa mofuta ona oa phepelo ea motlakase o tlameha ho hokahanngoa. Lekola hore mains voltage lumellana le sena, tse ling kaofela voltagEs ho feta kamoo ho boletsoeng, khanya e ka senyeha ka mokhoa o ke keng oa lokisoa. Molaoli o tlameha ho hokahanngoa ka kotloloho le marang-rang mme a ka sebelisoa. Ha ho na phepelo ea motlakase e nyenyefatsang.

TLHALOSO KAKARETSO

Sesebelisoa sena sa digital DMX 'scene setter' se ka laolang liteishene tse 24 'me sa fana ka taolo e felletseng ea lisebelisoa tsohle tse 24. E na le mehopolo e 48 e hlophisehang habonolo e nang le bokhoni ba ho boloka liketsahalo tse 99 tse fapaneng tsa khanya ka memori. E ka seta ka taolo ea othomathiki kapa ka taolo ea mmino ka sebuela-hōle se hahelletsoeng kapa ka leqhubu la molumo le kantle. Lebelo le nako ea khanya ea khanya le tsona lia khetha. Taolo ea dijithale DMX-512 e sebelisa "liaterese" bakeng sa taolo ea motho ka mong ea li-unit tsa lebone tse hokahantsoeng. Liaterese tsena tse tsoang li hlophiselitsoe linomoro tsa 1 ho isa ho 24.

MOLAOLI LE MESEBETSI

1. PRESET A LED: Lisebelisoa tsa li-LED bakeng sa ho beha litsamaiso tsa li-slide ho tloha karolong ea A.
2. LITLHAKU TSE KHOLO TSA 1-12: li-slider tsena li tla fetola tlhahiso ea kanale 1 ho ea ho 12 ho tloha 0 ho 100%
3. LITLHAKU TSE KHOLO 1-12: Tobetsa ho kenya tšebetsong boholo ba kanale.

4. PRESET B LED: Lits'oants'o tsa LED bakeng sa ho beha litsamaiso tsa li-slide ho tloha karolong ea B.
5. LITLHAKU TSE KHOLO: Li-LED tsa sesupo bakeng sa liketsahalo tse sebetsang.
6. LITLHAKU TSE KHOLO TSA 13-24: li-slider tsena li tla fetola tlhahiso ea kanale 13 ho ea ho 24 ho tloha 0 ho 100%
7. LITLHAKU TSE KHOLO 13-24: Tobetsa ho kenya tšebetsong boholo ba kanale.

8. MASTER A SLIDER: sekwahelo se tla lekanyetsa tlhahiso ea sete A.
9. SEHLOOHO SE Foufetseng: Mosebetsi ona o tlosa mocha oa ho lelekisa lenaneo ka mokhoa oa CHNS / SCENE.
10. MASTER B: taolo ea litepisi e beha khanya ea liteishene tsa 13 ho isa 24.
11. Senotlolo sa lapeng: Konopo ena e sebelisetsoa ho etsa hore "Blind" e sebetse.
12. FADE TIME SLIDER: E sebelisetsoa ho fetola nako ea ho fela.
13. TAP SYNC: konopo ho hokahanya morethetho oa STEP le 'mino.
14. SPEED SLIDER: E sebelisetsoa ho lokisa lebelo la ho lelekisa.
15. TLALA-TSOHLE: Mosebetsi ona o tlisa matla ohle ka botlalo.
16. MOLEMO OA AUDIO: Selaete sena se laola kutlo ea phallo ea Audio.
17. LITLHAKU TSE KHOLO: konopo e fetolela litholoana tsohle ho zero. Leseli le mosehla lea khanya.
MOHATO: Konopo ena e sebelisoa ho ea mohatong o latelang kapa ketsahalong e latelang.
19. AUDIO: E kenya tšebetsong khokahano ea molumo ea litlamorao tsa ho lelekisa le molumo.
20. Tšoara: Konopo ena e sebelisetsoa ho boloka boemo ba hona joale.
21. PAKI: ka mode, e tobetse ho khetha SINGLE CHASE kapa MIX CHASE. Ho PRESET e habeli, ho tobetsa PARK B ho ts'oana le MASTER B ka boholo. Ka SESLELE PRESET, ho tobetsa PARK A ho tšoana le MASTER A ka boholo.
22. KENYA / BOLAYA / REKOTO Tsoa: senotlolo sa rekoto ea ho tsoa. Ha LED e bonesitsoe e ka mokhoa oa KILL, ka mokhoa ona tobetsa konopo efe kapa efe ea flash mme liteishene tsohle li zero ntle le kanale e khethiloeng.
23. REKOTO / SHIFT: e tobetse ho hatisa mohato oa lenaneo. Mesebetsi ea Shift e sebelisoa feela ka likonopo tse ling.
24. LEQEPHE / REC CLEAR: konopo ho khetha leqephe la memori ho tloha 1 ho isa 4.
25. KHETHO EA MODI / REC Lebelo: Pompo e ngoe le e ngoe e tla kenya tšebetsong mokhoa oa ts'ebetso ka tatellano:, Double Preset le Single Preset. Lebelo la Rec: Behisa lebelo la efe kapa efe ea mananeo a lelekisang ka mokhoa oa Mix.
26. LEFIFI: e tobetse ho emisa tlhahiso e felletseng, ho kenyeletsoa FULL ON le FLASH.
27. EDIT / ALL REV: Edita e sebelisoa ho kenya tšebetsong mofuta oa Edita. Rev eohle e tlameha ho khutlisa tataiso ea ho lelekisa mananeo ohle.
28. INSERT /% kapa 0-255: Kenya ke ho eketsa mohato o le mong kapa mehato sebakeng. % kapa 0-255 e sebelisetsoa ho fetola potoloho ea boleng ba pontšo lipakeng tsa% le 0-255.
29. TLULA / FIHLELA E LE NNGWE: Tlosa mohato ofe kapa ofe oa ketsahalo kapa u etsolle morao tsela e lelekisa ea lenaneo lefe kapa lefe.
30.
31. TLAS'A / LEBETE LEBETE. : MOSEBETSI o sebetsa ho fetola ketsahalo ka mokhoa oa Edita; BEAT REV e sebelisetsoa ho khutlisa tataiso ea ho lelekisa lenaneo ka morethetho o tloaelehileng.

Likhokahanyo PANENG E Morao

1. KENO EA MATLA: DC 12-18V, 500mA MIN.
2. MIDI THRU: Sebelisa ho fetisa data ea MIDI e fumanoeng sehokelong sa MIDI IN.
3. MIDI OUT: fetisetsa data ea MIDI e iqapetsoeng ka boeona.
4. MIDI IN: o amohetse data ea MIDI.
5. DMX OUT: Phallo ea DMX.
6. KHETHA POLARITY EA DMX: khetha polarity ea tlhahiso ea DMX.
7. KENYETSO EA AUDIO: mola oa 'mino o le mong.100mV-1Vpp.
8. TAOLO EA REMOTE: HO FIHLELETSA LE HO FIHLELLOA ho laoloa hole ho sebelisoa jack ea 1/4-stereo.

MESEBETSI EA SEBELETSO EA LITLHAKU

1) Ts'ebetso ea mokhoa oa ho etsa mananeo:
Boloka konopo ea RECORD / SHIFT e sutumellelitsoe kahare ebe o tobetsa ka ho latellana likonopo tsa flash, 1, 5, 6 le 8. Likonopo tsena li fumaneha ka tlasa litsamaiso tse thellang moleng o kaholimo oa PRESET A. Lokolla RECORD / SHIFT. Lenaneo le khubelu la LED le lokela ho bonesa.

2) Tsoa ka mokhoa oa ho etsa mananeo:
Tšoara konopo ea RECORD / SHIFT fatše ebe u tobetsa ka nako e le 'ngoe konopo ea REC / EXIT. Lenaneo le khubelu la LED lea tima.

3) Ho hlakola mananeo ohle (hlokomela!):
Sebelisa mokhoa oa ho etsa mananeo joalo ka ha ho hlalositsoe kaholimo mohatong oa 1. Tšoara konopo ea RECORD / SHIFT fatše ebe u tobetsa ka tatellano likonopo tsa 1, 3, 2 le 3 karolong ea PRESET A. Lokolla konopo ea RECORD / SHIFT. Lits'oants'o tsohle tse bobebe tse bolokiloeng joale li hlakotsoe ho ROM. Leseli tsohle li bonesa ho netefatsa. Tobetsa RECORD / SHIFT le likonopo tsa REC / EXIT ka nako e ts'oanang ho tlohela mokhoa oa ho etsa mananeo.

2) Ho hlakola RAM:
RAM e sebelisoa e le mohopolo oa lipakeng bakeng sa liketsahalo tse khanyang tse 'maloa nakong ea lenaneo. Haeba o etsa phoso nakong ea lenaneo, o ka hlakola RAM. Sebelisa mokhoa oa ho etsa mananeo joalo ka ha ho hlalositsoe mohato oa 1. Tšoara konopo ea RECORD / SHIFT ha u ntse u tobetsa konopo ea REC / CLEAR. Leseli tsohle tsa LED li bonesa hang ho bontša hore RAM e hlakotsoe.

LITLHAKISO TSA LITLHAKU TSE KHOLO TSA LITLHAKU TSE KHOLO

1) Sebelisa mokhoa oa ho etsa mananeo joalo ka ha ho hlalositsoe ho Mesebetsi ea Motheo.
2) Khetha mofuta oa 1-24 o le mong (lebone le letala la LED le bonesa) ka konopo ea KHETHO EA MODE. Ka mokhoa ona, o ka sebelisa liteishene tsohle tse 24.
3) Sutumelletsa MASTER li-slider control A le B maemong a tsona a holimo. Tlhokomeliso: Laola A ka botlalo le taolo B ka botlalo tlase.
4) Seta boemo ba lebone bo hlokahalang ka taolo ea selaete ho isa ho 1.
5) Tobetsa RECORD / SHIFT konopo hang ho boloka boemo bona ho RAM.
6) Pheta mehato ea 4 le ea 5 ka maemo a fapaneng a li-slide hore o fumane leseli le nepahetseng. O ka boloka mehato e fihlang ho 99 mohopolong ka mong.
7) Mehato e hlophisitsoeng joale e tlameha ho tlosoa ho RAM ho ea ho ROM. Tsoela pele ka tsela e latelang: Khetha leqephe la memori (1 ho isa ho la 4) ka konopo ea LEQEPHE / REC CLEAR. Tšoara konopo ea RECORD / SHIFT fatše ebe u tobetsa e 'ngoe ea likonopo tsa flash ho isa ho 1 karolong ea PRESET B. O ka boloka mehato e ka bang 13 ka mohopolo. Ho na le maqephe a 99 kaofela a nang le lihopotso tse 4 ka 'ngoe.
8) Tsoa ka mokhoa oa ho etsa mananeo (tobetsa RECORD / SHIFT le REC EXIT likonopo). Lenaneo le khubelu la LED le tlameha ho tima.

EXAMPLE: HO RERELA LITLHAKU TSE KHOLO TSE BONAHALANG

1) Fetola mokhoa oa ho bulela (tobetsa REKOTO / SHIFT le likonopo tsa 1, 5, 6 le 8).
2) Seta lisebelisoa tse peli tsa MASTER slider ho isa holimo (A holimo, B tlase).
3) Khetha mofuta oa 1-24 o le mong ka konopo ea MODE SELECT (mabone a LED a tala a bonesa).
4) Sututsa taolo ea 1 ho isa ho 10 (boholo) ebe o tobetsa RECORD / SHIFT hang.
5) Push the controls 1 to zero and 2 to maximum ebe u tobetsa REKOTO / SHIFT hape
6) Push taolo ea 2 ho ea ho zero le 3 ho ea holimo ebe o tobetsa REKOTO / SHIFT hape.
7) Pheta mehato ena ho fihlela ho laola 24.
8) Khetha leqephe la memori (1 ho isa ho la 4) ka konopo ea LEQEPHE / REC CLEAR.
9) Boloka khanya e sebetsang leqepheng lena ka ho tobetsa e 'ngoe ea likonopo tsa flash karolong ea PRESET B (1 ho isa ho 12). Sebelisa mohlala, nomoro ea 1 ea konopo.
10) Tlohela mokhoa oa ho etsa mananeo ka ho tobetsa ka nako e le 'ngoe likonopo tsa RECORD / SHIFT le REC EXIT.

HO BAPALA LEHATLA LA LESEDI LE SEBETSANG

1) Khetha mofuta CHASE / SCENES ka konopo ea KHETHO EA MODE. Leseli le khubelu lea khantša.
2) Sutumelletsa taolo ea kanale e nepahetseng (memori) ho tloha karolong ea PRESET B ho ea holimo. Ho ex ea ronaampHona e ne e le konopo ea Flash 1. Sena se baka mehato e bolokiloeng memoring eo. Haeba taolo e nepahetseng ea li-slider e ne e se e le maemong a holimo, ho hlokahala hore o e hule pele ebe o e sutumetsa hape ho tsosa paterone.

HO SENYA METSOANA A LEBENYA A LEBENANG

1) Sebelisa mokhoa oa ho etsa mananeo (tobetsa REKOTO / SHIFT le likonopo tsa 1, 5, 6 le 8-mola o kaholimo).
2) Khetha leqephe le hlokahalang (1 ho isa ho la 4) ka konopo ea LEQEPHE / REC CLEAR.
3) Tšoara RECORD / SHIFT fatše ebe u tobetsa kapele habeli konopo e loketseng ea flash ho tsoa karolong ea PRESET B moo ho bolokiloeng paterone.
4) Lokolla REKOTO / SHIFT. Leseli tsohle tsa li-LED lia khanya ho netefatsa.

HO FETOLA LETHATHAMO LA LETSATSI LE SEBETSANG

Moetso o khanyang o ka ba le mehato e fihlang ho 99. Mehato ena e ka fetoloa kapa ea hlakoloa hamorao. U ka eketsa
mehato hamorao. 'Mohato' o mong le o mong ke sethala se ikemiselitseng sa khanya e fapaneng (0-100%) ea 24 lamps kapa lihlopha tsa lamps.

Ho hlakola mohato o itseng:

1) Sebelisa mokhoa oa ho etsa mananeo (tobetsa REKOTO / SHIFT 'me ka nako e le' ngoe 1, 5, 6 le 8).
2) Khetha leqephe le hlokahalang ka konopo ea LEQEPHE.
3) Tobetsa konopo ea MODE SELECT ho fihlela LED e khubelu e bonesa (CHASE-SCENES).
4) Tšoara konopo ea EDIT fatše ebe u tobetsa ka nako e ts'oanang konopo ea khanya ea paterone e nepahetseng ea mabone (likonopo tsa khanya moleng o ka tlase oa karolo ea PRESET B).
6) Lokolla konopo ea EDIT ebe u khetha ka konopo ea STEP mohato o tla hlakoloa.
7) Tobetsa konopo ea Tlosa 'me mohato o khethiloeng o tla hlakoloa memoring.
8) Tlohela mokhoa oa ho etsa mananeo ka ho ts'oara RECORD / SHIFT down ha o ntse o tobetsa habeli konopo ea REC / EXIT.

Ho eketsa mehato:
1) Sebelisa mokhoa oa ho etsa mananeo (tobetsa REKOTO / SHIFT 'me ka nako e le' ngoe ka tatellano ea 1, 5, 6 le 8).
2) Khetha leqephe le hlokahalang ka konopo ea LEQEPHE.
3) Tobetsa konopo ea MODE SELECT ho fihlela LED e khubelu e bonesa (CHASE-SCENES).
4) Tšoara konopo ea EDIT fatše ebe u tobetsa ka nako e ts'oanang konopo ea khanya ea paterone e nepahetseng ea mabone (likonopo tsa khanya moleng o ka tlase oa karolo ea PRESET B).
5) Lokolla konopo ea EDIT ebe u khetha ka konopo ea STEP mohato hang kamora mohato o lokelang ho eketsoa.
6) Seta boemo ba khanya bo hlokahalang ka taolo ea selaete, tobetsa konopo ea RECORD / SHIFT ebe o kenya INSERT konopo.
7) Haeba ho hlokahala, pheta mehato ea 5 le ea 6 ho eketsa mehato e meng.
8) Tšoara RECORD / SHIFT tlase ebe u tobetsa habeli konopo ea REC / EXIT ho tlohela mofuta oa programming.

Ho fetola mehato:
1) Sebelisa mokhoa oa ho etsa mananeo (tobetsa REKOTO / SHIFT 'me ka nako e le' ngoe ka tatellano ea 1, 5, 6 le 8).
2) Khetha leqephe le hlokahalang ka konopo ea LEQEPHE.
3) Tobetsa konopo ea MODE SELECT ho fihlela LED e khubelu e bonesa (CHASE-SCENES).
4) Tšoara konopo ea EDIT fatše ebe u tobetsa ka nako e ts'oanang konopo ea khanya ea paterone e nepahetseng ea mabone (likonopo tsa khanya moleng o ka tlase oa karolo ea PRESET B).
5) Khetha mohato o hlokahalang ka konopo ea STEP.
6) Joale o ka fetola matla a khanya ea lamps ka tsela e latelang: tšoara konopo ea DOWN ha e hatelloa ha u ntse u tobetsa konopo ea flash eo u batlang ho e fetola. Pontšo e bonts'a boemo bofe bo khethiloeng. (0 - 255 e lekana le 0 - 100%)
7) Tšoara RECORD / SHIFT tlase ebe u tobetsa habeli konopo ea REC / EXIT ho tlohela mofuta oa programming.

TAOLO EA MOTSOA

Kopanya mohloli oa molumo ho kenyelletso ea RCA ka lehlakoreng le ka morao (100mV maq). Bulela taolo ea 'mino ka konopo ea AUDIO. Leseli le letala lea khantša. Behantsha sephetho se hlokehang ka taolo ea li-slider AUDIO LEVEL.

HO BOLOKA LEBENYA LE LEBETSANG

1) Tima taolo ea 'mino.
2) Khetha paterone e hlokahalang ka konopo ea LEQEPHE le taolo e nepahetseng ea sekhahla sa karolo ea PRESET B.
3) Tobetsa konopo ea MODE SELECT ho fihlela LED e khubelu e bonesa (CHASE-SCENES).
4) Khetha mofuta oa MIX CHASE ka konopo ea PARK (mabone a mosehla a LED)
5) Behantsha lebelo la mabone ka lebelo la SEBETSA sa SPEED kapa o tobetse morethetho o nepahetseng habeli konopo ea TAP SYNC. O ka pheta sena ho fihlela o fumane lebelo le nepahetseng.
6) Boloka boemo bona ba lebelo mohopolong ka ho ts'oara konopo ea REC SPEED tlase ha o ntse o tobetsa konopo ea flash ea paterone e nepahetseng. Taolo ya dilaete e bakang paterone, e tlameha ho ba maemong a hodimo.

HO SENYA LEBELO LE RALANG

1) Tima taolo ea 'mino.
2) Khetha paterone e hlokahalang ka konopo ea LEQEPHE le taolo e nepahetseng ea sekhahla sa karolo ea PRESET B. Beha taolo ea selaete ka botlalo holimo.
3) Tobetsa konopo ea MODE SELECT ho fihlela LED e khubelu e bonesa (CHASE-SCENES).
4) Khetha mofuta oa MIX CHASE ka konopo ea PARK (mabone a mosehla a LED).
5) Sutumelletsa taolo ea ho thella ka lebelo le felletseng.
6) Tšoara konopo ea REC SPEED fatše ha u ntse u tobetsa konopo ea flash ea paterone e nepahetseng. Boemo bo tsitsitseng ba lebelo bo se bo hlakotsoe.

HO FETOLA MAFOKO A TAOLO EA LEBELO

Taolo ena ea sakha e na le mekhahlelo e 'meli ea taolo e fetolehang: metsotsoana e 0.1 ho isa ho metsotso e 5 le metsotsoana e le 0.1 ho isa ho metsotso e 10 Tšoara konopo ea RECORD / SHIFT fatše ebe u tobetsa makhetlo a mararo ka tatellano ea konopo ea flash 5 (ho tloha moleng o kaholimo) ho beha moalo ho fihlela metsotso e 5, kapa makhetlo a mararo konopo ea flash bakeng sa maemo a 10 a metsotso. Mefuta e khethiloeng e bonts'oa ke li-LED tse mosehla tse kaholimo ho taolo ea SPEED.

TLHALOSO EA MESEBETSI E MENG E KHETHEHILENG

Tlhokomeliso: Ha setter seteiso e buloa, mosebetsi oa BLACK OUT o kenngwa ka bo eona. Liphetho tsohle li hlophiselitsoe ho zero hore litlamorao tsa khanya li se sebetse. Tobetsa konopo ea BLACK OUT ho tlohela mokhoa ona.

Fade nako:
Taolo ea FADE e beha nako ea ho fela pakeng tsa libaka tse fapaneng tsa khanya.

Mokhoa o le Mong:
Ka mokhoa o le mong mananeo ohle a leseli a tla bapaloa ka tatellano. Khetha mofuta oa CHASE-SCENES ka konopo ea MODE SELECT (LED e khubelu) le mode ea SINGLE CHASE ka konopo ea PARK (LED e mosehla). Etsa bonnete ba hore taolo ea audio e tima. Taolo ea SPEED e beha lebelo la lipaterone tsohle.

Mokhoa oa ho kopanya:
Lipapali tse ngata tsa mekhoa e bolokiloeng. Khetha CHASE-SCENES ka konopo ea MODE SELECT (LED e khubelu) le MIX CHASE ka konopo ea PARK (LED e mosehla). Etsa bonnete ba hore taolo ea molumo e tima 'me u behe lebelo la litlamorao ka bonngoe ka taolo ea SPEED.

Lipontšo ponts'ong:
Pontšo e bonts'a litlhophiso tse fapaneng le linomoro tsa paterone. U ka khetha lipakeng tsa ponts'o ea boleng ba DMX (0 ho ea 255) kapa percentage (0 ho 100%) ea sethala sa mabone. Tšoara konopo ea RECORD / SHIFT fatše ha u ntse u tobetsa konopo ea INSERT /% kapa 0-255. Beha e 'ngoe ea lisebelisoa tse thellisang tse 1 ho isa ho tse 24 sebakeng se holimo ebe u sheba pontsho. Haeba ho hlokahala, pheta mehato ena. Metsotsoana le metsotsoana li bontšitsoe pontshong ka matheba a mabeli. Mohl. Metsotso e 12 le metsotsoana e 16 li bontšoa e le 12.16 .. Haeba nako e le ka tlase ho motsotso o le mong, e bonts'oa ka letheba le le leng, mohlala, 1 ke metsotsoana e 1 mme 12.0 ke metsotsoana e 12.

Mosebetsi o foufetseng:
Nakong ea papali e iketsang ea lebone le khanyang, ho a khonahala ho tima kanale e itseng le ho laola mocha oo ka letsoho. Tšoara konopo e foufetseng ha u ntse u tobetse konopo ea kanale eo u lakatsang ho e tima ka nakoana. Ho bulela mocha hape, tsoela pele ka tsela e ts'oanang.

MESEBETSI E FAPANENG EA MOTSOALLE OA MIDI

Ho fetola mosebetsi oa ho kenya oa MIDI:
1) Tšoara konopo ea RECORD / SHIFT tlase.
2) Tobetsa makhetlo a mararo konopo ea flash. 1 karolong ea PRESET A.
3) Lokolla likonopo. Pontšo e bontša hona joale [Chl] 4) Khetha ka e 'ngoe ea likonopo tsa flash 1 ho isa ho 12 karolong ea PRESET B mohlala oo u lakatsang ho eketsa MIDI ho oona. file.

Ho fetola mosebetsi oa tlhahiso ea MIDI:
1) Tšoara konopo ea RECORD / SHIFT tlase.
2) Tobetsa makhetlo a mararo konopo ea flash. 2 karolong ea PRESET A.
3) Lokolla likonopo. Pontšo e bonts'a hona joale [Ch0].
4) Khetha ka e 'ngoe ea likonopo tsa flash ho isa ho 1 ho karolo ea PRESET B mohlala ho tloha moo o lakatsang ho bulela tšebetso ea tlhahiso ea MIDI.

Ho tima mesebetsi ea MID le ea khumo
1) Tšoara konopo ea RECORD / SHIFT tlase.
2) Tobetsa konopo ea REC / EXIT hang.
3) Lokolla likonopo ka bobeli. Pontšo e bonts'a hona joale 0.00.

Khoasolla taolo ea MIDI file:
1) Tšoara konopo ea RECORD / SHIFT tlase.
2) Tobetsa makhetlo a mararo konopo ea flash. 3 karolong ea PRESET A.
3) Lokolla likonopo ka bobeli. Pontšo e bonts'a hona joale [IN].
4) Ha o ntse o jarolla data, lits'ebetso tsohle tse sebelisang mabone li tima ka nakoana.
5) Protocol ea taolo e jarolla data ho tsoa atereseng 55Hex tlasa file lebitso DC1224.bin.

Ho kenya taolo ea MIDI file:
1) Tšoara konopo ea RECORD / SHIFT tlase.
2) Tobetsa makhetlo a mararo konopo ea flash. 4 karolong ea PRESET A.
3) Lokolla likonopo ka bobeli. Pontšo e bonts'a hona joale [OUT].
4) Ha o ntse o kenya data, lits'ebetso tsohle tsa mabone li tima ka nakoana.
5) Protocol ea taolo e kenya data ho rarolla 55Hex tlasa file lebitso DC1224.bin.

Tlhokomeliso!
1. Ho boloka mananeo a hau a sa lahlehe, yuniti ena e tlameha ho fuoa motlakase eseng ka tlase ho hora tse peli khoeli le khoeli.
2. Karolo e bonts'ang e bonts'a "LOP" haeba voltage tlase haholo.

TS'ELISO MOTS'OANE

Ho kenya matla: DC12 ~ 20V, 500mA
Mohokahanyi oa DMX: tlhahiso ea 3-polig XLR
Sehokedi sa MIDI: 5-pin DIN
Keletso ea Audio: RCA, 100mV-1V (maq)
Litekanyo ka yuniti: 483 x 264 x 90mm
Boima (ka yuniti) : 4.1 lik'hilograma

Litlhaloso li tloaelehile. Litekanyetso tsa 'nete li ka fetoha hanyane ho tloha ho yuniti e' ngoe ho ea ho e 'ngoe. Litlhaloso li ka fetoloa ntle le tsebiso esale pele.

Phatlalatso ea ho lumellana

Moetsi:
LITŠOANTŠISO BV
Mokhahlelo oa Bedrijvenpark Twente 415
7602 KM - ALMELO
+31(0)546589299
+31(0)546589298
Netherlands

Nomoro ea sehlahisoa:
154.062

Tlhaloso ea Sehlahisoa:
Setlhophiso sa DMX 024 sa Molaoli oa PRO

Lebitso la Khoebo:
LITLHAKU

Tlhokahalo ea Taolo:
EN 60065
EN 55013
EN 55020
EN 61000-3-2/-3-3

Sehlahisoa se fihlela litlhoko tse boletsoeng ho Directives 2006/95 le 2004/108 / EC mme se latela liphatlalatso tse boletsoeng kaholimo.
Almelo,
29-07-2015

Lebitso: B. Kosters (Melao ea taolo)
Saena:

Lintlha le moralo li ka fetoha ntle le tsebiso pele ..
www.tronios.com
Copyright © 2015 ke TRONIOS Netherlands

Litokomane / Lisebelisoa

TRONIOS Controller Scene Setter DMX-024PRO [pdf] Buka ea Taelo Controller Scene Setter, DMX-024PRO, 154.062

Litšupiso

• Bukana ea Mosebelisi