TriTeq KnexIQ Wireless Authentication Reader and Latch Control Module
Litlhaloso
- Product Name: K ex Wireless Authentication Reader & Latch Control Module
- Power Source: DC or battery power (12 or 24 VDC powered)
- Compatibility: 125KHz & 13.56MHz RFID Prox cards, fobs, and stickers
- Installation: Externally mounted to enclosures & doors
- Control: Keypad, smartphone app, or enterprise portal
Litaelo tsa Tšebeliso ea Sehlahisoa
Kemiso:
Mount the K ex module externally on the enclosure or door using appropriate hardware.
Phepelo ea motlakase:
Connect the module to a DC power source (12 or 24 VDC) or use battery operation for power.
Setting Up User Parameters:
Access the web portal or smartphone app to set up user parameters such as access permissions and audit trails.
Tsamaiso ea Lock:
Utilize ProxTraq or MobileTraq portal and apps for lock management, user administration, and viewing audit trails.
Tšebelisano:
Enroll users with 125KHz & 13.56MHz RFID Prox cards, fobs, and stickers. Use existing RFID devices for access.
Paballo ea Matla:
The module features low power sleep mode to extend battery life.
- Boost your access control systems IQ by making any lock an intelligent lock. With the addition of a KnexiQ module, latches and door strikes become prox card, fob, smartphone and keypad enabled.
- Easily set up user parameters via a web portal or smartphone.
- Enjoy enterprise-wide management from anywhere while viewing audit trails and access attempts.
Latch mechanisms controlled:
- Southco, HES, Adams Rite and other industry standard latches and door stri
Set Up and Management:
- Multiple levels of connectivity allow the user to control via keypad, smartphone app, or enterprise portal.
Portal:
- ProxTraq or MobileTraq. (details on back page)
Sesebelisoa sa Smartphone:
- ProxTraq, initializes and updates lock parameters and eliminates device programming.
Tšebelisano:
- Compatible with 125KHz & 13.56MHz RFID Prox cards, fobs and stickers.
- Use existing prox cards or RFID devices. Enroll hundreds of users.
Kemiso:
- Externally mounted to enclosures & doors.
Matla:
- 12 or 24 VDC powered or battery operation.
Power conservation:
- Low power sleep mode extends battery life.
Lock management via ProxTraq and cloud database:
Ea laolehang
- Manage access with mobile app
- Add, modify, and remove locks, users, and privileges. View activity and history
- Conveniently manage hundreds of locks and users
- Security administration of othe enterprise from one portal, Remote enrollment of RFID cards
- Assign access parameters for each lock, employee, group, and location
- Track activity and generate audit trails
FCC
FCC: Sesebelisoa sena se lumellana le Karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
- sesebelisoa sena se ke ke sa baka tšitiso e kotsi, le
- sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng ea sesebelisoa.
MPE Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET 65, and CFR 47, Section 2.1093. This equipment has very low levels of RF energy that it is deemed to comply without maximum permissive exposure evaluation (MPE).
Co-location: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment. Information to User: Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.
Hlokomela:
Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa A, tlas'a karolo ea 15 ea Melao ea FCC.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used following the instruction manual, may cause harmful interference to radiocommunications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
RSS —102 CAUTION: Sesebelisoa sena se lumellana le meeli ea ho pepeseha ha mahlaseli a IC e behiloeng bakeng sa tikoloho e sa laoleheng 'me se kopana le RSS-102 ea melao ea IC radio frequency (RF) Exposure. Sesebediswa sena se na le matla a tlase haholo a RF hoo se neng se bona eka se a latela ntle le permissive exposure evaluation (MPE).
lintlha tse ling
LBH
- 1. What power sources are compatible with the K ex module?
- The module can be powered by DC (12 or 24 VDC) or by battery operation.
- 2. Can I enroll multiple users with different access permissions?
- Yes, you can enroll hundreds of users and set up different access parameters for each user via the web portal or smartphone app.
- 3. How do I update lock parameters and access permissions?
- You can update lock parameters and access permissions by utilizing the ProxTraq or MobileTraq portal and associated apps on Android & iOS devices.
Litokomane / Lisebelisoa
 |
TriTeq KnexIQ Wireless Authentication Reader and Latch Control Module [pdf] Buka ea Taelo MIQPROX 2BDMF-MIQPROX, 2BDMFMIQPROX, KnexIQ Wireless Authentication Reader and Latch Control Module, KnexIQ, Wireless Authentication Reader and Latch Control Module, Latch Control Module, Control Module |