TRI-O SPL-D2 Setsi sa Pontšo sa Boemo ba Molumo
Litaelo tsa Tšireletseho
- Litaelo tsohle tsa polokeho, litemoso le litaelo tsa ts'ebetso li tlameha ho baloa pele.
- Litemoso tsohle tse mabapi le thepa li tlameha ho eloa hloko.
- Litaelo tsa ts'ebetso li tlameha ho lateloa.
- Boloka litaelo tsa ts'ebetso bakeng sa tšebeliso ea nako e tlang.
- Thepa e kanna ea se ke ea sebelisoa haufi le metsi; etsa bonnete ba hore metsi le damp ha e khone ho kena ka har'a thepa.
- Thepa e ka kenngoa kapa ea kenngoa feela ho latela litlhahiso tsa moetsi.
- Thepa e tlameha ho kenngoa kapa e kenngoe e le hore moea o motle o se ke oa sitisoa.
- Thepa e kanna ea se ke ea kengoa sebakeng se haufi sa mehloli ea mocheso, joalo ka likarolo tsa lisebelisoa tsa ho futhumatsa, liboilers le lisebelisoa tse ling tse hlahisang mocheso (ho kenyeletsoa. amplifilimi).
- Hokela lisebelisoa ho phepelo ea motlakase ea molumo o nepahetsengtage, ho sebelisa feela likhoele tse khothaletsoang ke moetsi, joalo ka ha ho boletsoe litaelong tsa ts'ebetso le/kapa ho bonts'itsoe lehlakoreng la khokahano ea lisebelisoa.
- Thepa e ka hokeloa feela phepelong ea motlakase ea lefatše e amohetsoeng ka molao.
- Thapo ea motlakase kapa thapo ea matla e tlameha ho behoa ka tsela e etsang hore e se ke ea tsamaea ka mokhoa o tloaelehileng, 'me lintho tse ka senyang mohala kapa khoele li ke ke tsa behoa holim'a eona kapa khahlanong le eona. Tlhokomelo e khethehileng e tlameha ho lefshoa sebakeng seo thapo e leng ho sona. e khomaretsoeng ho thepa le moo thapo e hoketsoeng phepelong ea motlakase.
- Netefatsa hore lintho tse tsoang kantle ho naha le maro li ke ke tsa kena ka har'a sesebelisoa.
- Thepa e tlameha ho hloekisoa ho sebelisoa mokhoa o khothaletsoang ke moetsi.
- Haeba thepa e sa sebelisoe nako e telele, thapo ea motlakase kapa thapo ea motlakase e lokela ho khaoloa ho tsoa phepelong ea motlakase.
- Maemong 'ohle moo ho nang le kotsi, ka mor'a ketsahalo, hore lisebelisoa li ka ba tse sa sireletsehang, tse kang:
· haeba thapo ea motlakase kapa thapo ea motlakase e senyehile
· haeba lintho tse tsoang kantle ho naha kapa lino (ho kenyeletsoa le metsi) li kene ka har'a thepa
· if the equipment has suffered a fall or the casing has been damaged· if a change in the performance of the equipment is noticed it must be checked by appropriately qualified technical staff. - Mosebelisi a ke ke a etsa mosebetsi ofe kapa ofe sesebelisoa ntle le se boletsoeng litaelong tsa ts'ebetso.
Letsatsi la TRI-O
DATEQ ke mochini o kopanyang mocha oa 19-inch. E loketse haholo ho sebelisoa li-pubs, dancing-TRI-O ix 3-zone likolo, litsi tsa likopano joalo-joalo. The e na le lisebelisoa tse tharo tsa microphone le lisebelisoa tsa TRI-O 8stereo-line. Lintlha li ka fetisetsoa ho liphetho tse 3 tse kholo.
Channel 1 e na le potoloho ea lipuisano ho ntlafatsa kutloisiso ea puo. Potoloho ena, e hlahisoang ke lets'oao la maekerofounu ho tsoa ho kanale ea 1 (ke hore, e kentsoe ka lentsoe), e netefatsa hore lets'oao lena le feta tse ling kaofela. Mosebetsi oa ho bua o ka koaloa ha Talk Over e ka pele. Ka mokhoa o ikhethileng, libaka tse hlahisoang lia fumaneha (master A le ). Libaka tsena li na le tse tharo tse peli, BC e leka-lekaneng, tekano le taolo ea phaello. Ho feta moo ho ka eketsoa boholo ba li-module tse 'ne tsa tlhahiso (libaka tsa lihlahisoa). Bophahamo ba libaka tsena tse ling bo ka fetoloa ka ntle ka potentiometer CREWXOUT-W / CREWXOUT-B (ha e kenyellelitsoe) kapa taolo ea kantle.tage.
Li-masters li hlahisoa ka mokhoa o leka-lekaneng oa elektroniki ho XLR 'me ha li leka-lekane lihokelong tsa cinch. Sephetho se leka-lekaneng se etsa hore ho khonehe ho sebelisa lithapo tse telele tsa matšoao e le hore ampli-lifiers li ka behoa haufi le libui. libaka tseo a li khethang li na le lihokelo tsa cinch tse sa leka-lekanang.
Channel 2 e na le khokahanyo bakeng sa 'Mino o kenyang line tsohle tsa lehae, MRA-2WW kapa MRA-2GG. (ha e kenyelelitsoe)
Tšehetso ea lihlahisoa
Bakeng sa lipotso mabapi le , lisebelisoa le lihlahisoa tse ling, ka kopo ikopanye le: TRI-O
Dateq International BV
De Paal 37
1351 JG Almere The Netherlands
E-mail: info@dateq.nl
Mohala: +31 36 54 72 222
Marang-rang: www.dateq.nl
Ho kenya TRI-O
E etselitsoe ho kenngoa ka har'a rack ea lisenthimithara tse 19 'me e bophahamo ba likarolo tse tharo. Khabinete e lumellana le TRI-O e bulehileng ea 445 x 132 x 110 mm (W x H x D). Sheba hape litšoantšo tse nang le litekanyo tse ka tlase.
Borakete ea lisenthimithara tse 19 e botenya ba 2mm. Ha u kenya motsoako, hopola ho lumella sebaka se lekaneng bakeng sa lihokelo le li-plug ka morao ho Sehlopha sa Basebetsi!
TRI-O Connector board
Ka morao li-audio tsohle tse ka hare le tse hlahisoang li ka fumanoa, joalo ka sehokelo sa euro-mains (se nang le li-inmains-fuse) le liphetho tsa boikhethelo tsa libaka tse nang le lisebelisoa tsa taolo ea molumo.
Liphetho tse phahameng tsa stereo (Cinch female)
| Pin | Mosebetsi | Mofuta |
| Keletso | Audio + | Tsoa |
| Thebe | Fatše | A-GND |
L/ R e leka-lekaneng Master Outputs (XLR 3-pins male)
| Pin | Mosebetsi | Mofuta |
| 1 | Fatše | A-GND |
| 2 | Audio + | Tsoa |
| 3 | Audio - | Tsoa |
Tape stereo output (Cinch female)
| Pin | Mosebetsi | Mofuta |
| Keletso | Audio + | Tsoa |
| Thebe | Fatše | A-GND |
Ho kenya molumo oa libaka (Cinch female)
| Pin | Mosebetsi | Mofuta |
| Keletso | Ho laola molumo (Sheba leqephe la 7) | In |
| Thebe | Fatše | A-GND |
Line/Mola 1/ Linepe tsa 2 tsa Stereo (Cinch female)
| Pin | Mosebetsi | Mofuta |
| Keletso | Audio + | In |
| Thebe | Fatše | A-GND |
Mic/Mic Front/ Mic Rear e leka-lekaneng (XLR 3-pins female)
| Pin | Mosebetsi | Mofuta |
| 1 | Fatše | A-GND |
| 2 | Audio + | In |
| 3 | Audio - | In |
Tlhahiso ea mehala (TRS Jack 3p, ka pele)
| Pin | Mosebetsi | Mofuta |
| Keletso | Ka ho le letšehali | Tsoa |
| Letsetsa | Ho lokile | Tsoa |
| Sleeve | Fatše | A-GND |
Lihokelo
| MOSEBETSI OA LEKELETSO L/ R | Liphetho tsa elektronike tse leka-lekaneng ho lihokelo tsa XLR bakeng sa likanale tse letšehali le tse ka ho le letona tsa master A. Mofuta ona oa tlhahiso o tiisa phetisetso e phethahetseng ea mats'oao le haeba ho sebelisoa likhoele tse telele tsa molumo. Liphetho tsena li na le li-relay ho thibela lisebelisoa tse hokahantsoeng hore li se ke tsa 'plopping' ha yuniti e ntse e buloa le ho tima. |
| RETS'ELISITSOE MOLAOLI | Liphetho tse sa leka-lekaneng ho lihokelo tsa cinch. Tsena li ka sebelisoa ho hokahanya Sehlopha le ampsefepi kapa sehatisi. Liphetho tsena li na le li-relay ho thibela lisebelisoa tse hokahantsoeng hore li se ke tsa 'plopping' ha yuniti e ntse e buloa le ho tima. |
| Sebaka sa 1…4 Audio ou | Ka liphetho tsena ho ka etsoa libaka tse eketsehileng tse nang le taolo ea molumo oa kantle. Liphetho tsena li ka sebelisoa ho hokahanya kantle amplifiers. |
| MOFUTA 1…4 Molumo | Kenyelletso ena e laola molumo oa sebaka sa tlatsetso. Pakeng tsa ntlha le thebe potentiometer kapa matla a taolo a kantletage ka fanoa. bakeng sa tlhaloso e qaqileng haholoanyane |
| KHALE 7…3 | Lihokelo tsa Cinch bakeng sa likenyelletso tsa mohala oa stereo. Kanale e 'ngoe le e 'ngoe e na le lintho tse peli tse tšoanang (mola oa 1 le oa 2) bakeng sa libapali tsa CD, likonopo, li-MD-player joalo-joalo. Kenyelletso e 'ngoe le e' ngoe e na le mohlopholi oa eona ka morao. |
| KHALE 2 | Mocha o kopantsoeng oa mohala oa mono mic/stereo o nang le kenyeletso e leka-lekaneng (kapa ea lehae) sehokelong sa XLR le mola oa stereo sehokelong sa cinch. Ha o sebelisa microphone pin 1 le pin 3 e sa leka-lekaneng e tlameha ho hokahanngoa le tšireletso ea mohala. Ho sebelisa sehokelo sa libaka tsa lehae hokela 'Mino oa MRA-2 kaofela ho sehokelo sa 3 pin Phoenix u sebelisa thapo e leka-lekaneng ea maekrofono e bolelele ba 200m. |
| KHALE 1 | Seteishene sena se na le likenyelletso tse peli tsa maekrofono tse leka-lekaneng ka mokhoa oa elektroniki ho lihokelo tsa XLR (Mic Front le Mic Rear). Ha o sebelisa microphone pin 1 le pin 3 e sa leka-lekaneng e tlameha ho hokahanngoa le tšireletso ea mohala. |
| MATS'OANE/ FUSE | Kenyelletso ea mantlha ea Euro. E sebetsa ho 230V / 50Hz. Fuse: 5x20mmTRI-O (e nyane), 315mA butle. |
Taolo ea bophahamo ba libaka
Ka mokhoa ona, molumo oa sebaka sa kantle o ka fetoloa. Taolo ea molumo e ka kopanngoa ka litsela tse peli tse fapaneng:
Ho fana ka molumo oa kantletage
Ha voltage e fanoa pakeng tsa ntlha le tšireletso ea e 'ngoe ea li-connectors tsa cinch molumo o tla fokotsoa (bakeng sa bobeli le mocha o nepahetseng). Ha e mpe voltage e fanoang pontšo e tla ba ampkhallisoa. The ampmarang-rang a tsoang ho +14…-80dB. Kerafo e ka tlase e bontša amplification joalo ka ts'ebetso ea voltage:
Ho kopanya potentiometer
Hape hoa khoneha ho hokahanya potentiometer pakeng tsa ntlha le tšireletso ho e 'ngoe ea li-connectors tsa cinch. Maemo a fokotsehileng a tloha ho 0…-80dB. 10kOhm logarithmically potentiometer e fana ka liphetho tse ntle ka ho fetisisa. Kerafo e latelang e bonts'a phokotso joalo ka ts'ebetso ea angle ea ho potoloha:
Ha attenuation e feto-fetohang e sa hlokahale sehokelo sa cinch se nang le potoloho e khuts'oane lipakeng tsa ntlha le thebe se tlameha ho hokahanngoa. Ha kenyelletso e siuoa e butsoe molumo o tla fokotsoa ka botlalo.
Microphone e nang le Talk Over (1)
Maekerofounu e ka hokeloa mochana ona (ka pele, kapa ka morao). Seteishene se na le taolo hape, sekhetho se habeli le sekhetho sa ho kenya.
- HLOMELA
Ho hlophisoa esale pele molumo bakeng sa ho kenya Mic Front le Mic Rear. - PHAHAMENG
Taolo ea molumo o phahameng. - Mic Front/Ka morao
Sekhethi se kenyang. - PUOANE
E nolofalletsa kapa e tima potoloho ea Talk Over. Ha konopo e tobetse, LED e bonesa ka botala mme tshebetso ya Talk Over e a buleha. Ha u bua ka maekrofono likanale tse ling kaofela li tla fokotsoa 'me LED e tla khantša bofubelu ho bontša tšebetso ea lentsoe-over. - Fader
60mm fader e ka sebelisoang ho laola molumo oa kanale ena. - A, B, C
Khetha liphetho moo u batlang ho sebelisa kanale ena.
Maekerofounu e kopaneng / kanale ea mohala (2)
Kanale ena e ka sebelisoa ho hokela maekrofono kapa lets'oao la mohala oa stereo. Lenaneo le na le taolo ea phaello, khetho ea ho kenya le ho mamela pele ho fader (CUE).
- HLOMELA
Ho hlophisoa esale pele molumo bakeng sa maekrofono ka bobeli le ho kenya mohala oa stereo-line. - PHAHAMENG
Taolo ea molumo o phahameng. - PHAKOANE
Taolo ea molumo o tlase. - Mic/ Mola
Sekhethi se kenyang. - CUE
Enobles/ E holofaditseng ho mamela ka pele. Ha konopo e hatelloa letšoao la mocha ona le ka utluoa li-headphones 'me le bontšoa ho limithara tsa VU. Li-LED tsa master tsa CUE li tla tima. - Fader
60mm fader e ka sebelisoang ho laola molumo oa kanale ena. - A, B, C
Khetha liphetho moo u batlang ho sebelisa kanale ena.
Mola oa stereo (3 ... ) 6
Lisebelisoa tse peli tsa stereo li ka hokeloa mocha ona. Kanale e 'ngoe le e 'ngoe e na le khetho ea ho kenya letsoho, ho mamela pele ho fader le ho fokotsa chelete botong ea likhokahanyo.
- Mola oa 1/ Mola oa 2
Sekhethi se kenyang - CUE
Enobles/ E holofaditseng ho mamela ka pele. Ha konopo e hatelloa letšoao la mocha ona le ka utluoa li-headphones 'me le bontšoa ho VU-meters. Li-LED tsa master tsa CUE li tla tima. - Fader
60mm fader e ka sebelisoang ho laola molumo oa kanale ena.
Master section (AB) on , le C
E na le likarolo tse ts'oanang tsa TRI-O 3 (AB ). Karolo e 'ngoe le e' ngoe e na le litekanyo tse peli, ho leka-lekana, le C le ho fumana taolo le ts'ebetso ea ho mamela ka morao-rao.
- PHAHAMENG
Taolo ea molumo o phahameng. - PHAKOANE
Taolo ea molumo o tlase. - BALLA
E etsa qeto ea ho leka-lekana pakeng tsa mocha o letšehali le o nepahetseng. Ha e le boemong bo bohareng, kanale e ka letsohong le letšehali le e ka ho le letona e ka utluoa holimo. - MOTSAMAI
Fumana taolo bakeng sa liphetho tse sa leka-lekaneng tsa stereo (master A le Master B) le tlhahiso e leka-lekaneng ea stereo (master A feela) - MOTSAMAI CUE
E fetola mohloli oa li-headphone pakeng tsa master A le master B. LED e bontša mohloli (master A kapa master B). Ha ts'ebetso ea CUE ea mocha oa ho kenya e kentsoe tšebetsong li-LED tsa master-CUE li tla tima, 'me mocha oa ho kenya o tla khethoa e le mohloli oa li-headphone.
Tse fapa-fapaneng
- MATLA
Phetoho ea mantlha. - LIFONO
Taolo ea molumo oa li-headphones ka sehokelo sa li-headphones tsa stereo. Letšoao le khethiloeng la CUE le ka utluoa ka li-headphones (master A, master B kapa likenyelletso tse nang le ts'ebetso ea CUE e nolofalitsoeng).
Limithara
Ena ke ponts'o ea LED e bonolo ho bala ea 2- x 12-segment. Letšoao ho VU-meters ke lets'oao le hlahang ho li-headphones (master A, master B kapa lets'oao la CUE). , master C Boemo ba ts'ebetso bo ka bang 0dB ke lebitso.
Litlhaloso tsa Tekheniki
- MONO PELE
MIC (channel 1 le 2)…………………………………………XLR-3 e tšehali, e leka-lekaneng ka mokhoa oa elektronikiBoemo ba matšoao………………………………………..-50 dB @ 600 Ohm e fapaneng
Impedance ………………………………………………..3 kOhm ka lebitso
Lerata le kenyang …………………………………………< -100 dB (IHF-A)
Kamore ea hlooho ………………………………………………22 dB - LIEKETSENG STEREO
LINE (channel 2)……………………………………………Cinch
Boemo ba letshwao
Ho sitisa ho kenya ……………………………………..12 kOhm ka lebitso
Lerata le kenyang …………………………………………< -70 dB (IHF-A)
Karohano ea kanale……………………………….> 65 dB @ 1 kHz
LINE 1/ 2 ( kanale 3.. ) 6 ………………………………….Cinch
Boemo ba letshwao
Ho sitisa ho kenya ……………………………………..7 kOhm ka lebitso
Lerata le kenyang …………………………………………< -74 dB (IHF-A)
Karohano ea kanale……………………………….> 65 dB @ 1 kHz - TAOLO EA MOLIMO
LEKALATSO LA 1 LE KHALE 2
Holimo……………………………………………………….10 kHz ±12 dB, Shelving
Tlase…………………………………………………………. 30 Hz ±18 dB, Shelving
MOTSAMAI MOTS'I
Holimo……………………………………………………….12 kHz ±12 dB, Shelving
Tlase…………………………………………………………. 30 Hz ±18 dB, Shelving - LIEKETSO
BALANCE MASTER (XLR)…………………………..+6 dB e leka-lekaneng/ 600 Ohm/ e feto-fetohang
UNBALANCED MASTER OUT (Cinch) ……………………………… 0 dB unbalanced/ 600 Ohm/ feto-fetoha
ZONE1…4………………………………………………………….0 dB e sa leka-lekanang/ 600 Ohm/ feto-fetoha
MEFONO (6,3 mm TRS Jack)………………………..0,3 W @ 4 Ohm/ Impedance 4..32 Ohm - KEKETSO KARABO
MIC TO MASTER…………………………………………….15 Hz…25 kHz -1 dB
LIKETSO TSE LING TSOHLE HO MASTER………………10 Hz…30 kHz -1 dB
THD + N…………………………………………………………….0,01% ka lebitso - KAKARETSO
PHEPO EA MATLA E AHiloeng
Lithoto voltage……………………………………….90 5 …2 0 VAC / 50 Hz
Tšebeliso ea matla …………………………………10 VA
KHOLO LE KHETHO
Ka pele…………………………………………………………483 x 132 mm (W x H) = 19”, 3HECutout …………………………………………… ……445 x 132 mm (W x H)
Botebo ba Kabinete……………………………………….110 mm ntle le likhokahanyo
Boima ba 'mele
Litokomane / Lisebelisoa
 |
TRI-O SPL-D2 Setsi sa Pontšo sa Boemo ba Molumo [pdf] Bukana ea Mosebelisi Setsi sa Pontšo sa Boemo ba Molumo oa SPL-D2, SPL-D2, Yuniti ea Pontšo ea Boemo ba Molumo, Yuniti ea Pontšo ea Boemo, Yuniti ea Pontšo. |
