E5O
Bukana ea mosebelisi
E50 e Phahameng ea Ts'ebetso ea DAC e nang le Kenyelletso e meraro ea Digital
Kea leboha ha u rekile E50!
E50 sa ts'ebetso e phahameng ea DAC e nang le lisebelisoa tse tharo tsa dijithale, tlhahiso e le 'ngoe ea RCA e sa leka-lekanang le tlhahiso e le 'ngoe e leka-lekaneng ea TRS. E ka sebelisoa e le DAC e bonolo kapa DAC + pre-ampLifier, re tšepa hore e ka u tlisetsa monate oa ho natefeloa ke 'mino. Hona joale re u khothalletsa hore u bale bukana ena e le hore u ka sebelisa likarolo tsohle tsa E50 ka nepo.
Selelekela ho MQA
MQA (Boleng ba Boleng bo Tiisitsoe)
MQAI ke theknoloji ea Borithane e hapileng likhau e fanang ka molumo oa rekoto e kholo ea mantlha. Monghali MQAfile e netefalitsoe ka botlalo 'me e nyane ho lekana hore e ka tsamaisoa kapa ea khoasolla.
E50 e sebelisa theknoloji ea MQA ho amohela le ho khetholla molumo oa MQA le ho fana ka molumo oa boemo bo holimo
Etela mqa.co.uk bakeng sa lintlha tse ling.
Lethathamo la litaba
| ES50 | x 1 |
| Taolo e hole | x 1 |
| Mohala oa USB | x 1 |
| Khoele ea DC | x 1 |
| Bukana ea mosebelisi | x 1 |
| Karete ea tiisetso | x 1 |
Hlokomela: U ka khoasolla li-driver le bukana ea mosebelisi ho http://www.topping.audio/.
Tšobotsi
| Lekanngoa | 15.5cm x 12.9cm x 4.1cm |
| Boima ba 'mele | 4459 |
| Ho kenya matla | DC5V/A |
| Kenyeletso ya matshwao | USB/OPT/COAX |
| Mola oa Outout | BAL/SE |
| Pontšo | LED |
| Tšebeliso ea matla ka tšebeliso e tloaelehileng | <2.5W |
Phanele e ka pele
1-1 skrine ea LED
1- 2 Remote control receiver
1-3 konopo ea ho ama ea mesebetsi e mengata
Pontšo
2-1 Kanale ea ho kenya
2-2 Kanale ea tlhahiso
23 Pontšo e khutsitseng (E lula e khantša ha e khutsitse 'me ea nyamela ha e sa khutse)
2-4 PCM/DSD pontsho ya sebopeho
2-5 Sampsebaka sa pontsho sa sekhahla/bolumo
2-6 MQA pontso ea sebopeho*
*Hlokomela: Ho na le mefuta e meraro ea mekhoa ea ts'ebetso ea MQA.
- “MQA”: E bontsha hore sehlahiswa se ntse se qapa le ho bapala molapo wa MQA kapa file, 'me e bolela mokhoa oa tlhaho ho netefatsa hore molumo o tšoana le oa mohloli.
- “MQA.”: E supa itis e bapalang MQA Studio file, e seng e amohetsoe studio ke sebini/moetsi kapa e netefalitsoe ke mong'a litokelo tsa molao.
- “OFS”: E netefatsa hore sehlahiswa se fumana MQA stream kapa file. Sena se fana ka phatlalatso ea ho qetela ea MQA file mme e bonts'a ea mantlha sample sekhahla
Phanele e ka morao
3-1 Channel e nepahetseng 6.35mm TRS tlhahiso e leka-lekaneng.
3-2 kanale e ka ho le letšehali 6.35mm TRS tlhahiso e leka-lekaneng
3-3 Phatlalatso e nepahetseng ea mocha o le mong oa RCA
3-4 Leftchannel e phethiloeng e le 'ngoe RCA tlhahiso
3-5 Coaxial SPDIF e kenyang
3-6 Optical SPDIF ho kenya
3-7 ho kenya USB
3-8 Powerinput
Taolo e hole
4-1 E eme
4-2 Phahamisa molumo
4-3 Fetolela ho se kentsweng se fetileng
4-4 Konopo e fosahetseng
4-5 Tlhophiso ya sefe
4-6 Boemo ba ho ema ka ho iketsa
47 Khutsa
4-8 konopo ea OK
4-9 Fetolela ho kenyeletso e latelang
4-10 Ho theoha ha molumo
4-11 Ho fetola kanale ea tlhahiso
4-12 Konopo e fosahetseng
4-13 Khanya*
*Hlokomela:
“L-1″,”L-2” le “L-3” ka ho latellana li bontša khanya e tlaase, e mahareng le e phahameng.
“LA” e na le kganya e tshwanang le ya “L-2”. Phapang e teng ha ho se na ts'ebetso ka mor'a metsotsoana ea 30 tlas'a "LA" mode, skrine e tla tima ka boeona, e bonts'a feela tlhahiso ea hona joale. Bakeng sa mohlalaample, ha e kentsoe ka USB, E50 e bonts'a ka tsela e latelang. O ka tobetsa konopo efe kapa efe ho bonesa skrineng.
Input mefuta e fapaneng
| USB IN | PCM 44.1kHz-768kHz/16bit-32bit |
| DSD DSD64-DSD512 (Native) , DSD64-DSD256 (DoP) | |
| MQA e feletseng Decode | |
| COAX/KHETHA HO KENA | PCM 44.1kHz-192kHz/16bit-24bit |
| DSD DSD64(Dop) | |
| MQA Renderer Decode |
Litlhaloso
| E50 Decoding parameters (USB In©96kHz) | ||
| SE | BALLA | |
| (Aw THD+Nt) | <0.00010% @1kHz | <0.00009% @1kHz |
| THD (Ha ho na 90kBw) |
<0.0003% @20-20kHz | <0.0003% @20-20kHz |
| SNR(A-wt) | 124dB @ 1kHz | 126dB @ 1kHz |
| Dynamic range(A-wt) | 124dB @ 1kHz | 126dB @ 1kHz |
| Karabelo ea Khafetsa | 20Hz-20kHz(±0.1dB) | 20Hz-20kHz(±0.1dB) |
| 20Hz-40kHz(±0.3dB) | 20Hz-40kHz(±0.3dB) | |
| Boemo ba Sephetho | 2Vrms @OdBFS | 4Vrms @OdBFS |
| Lerata(A-wt) | <1.3uVrms | <2.3uVrms |
| Crosstalk | -130dB @1 kHz | -139dB @1 kHz |
| Channel Balance | 0.3dB | 0.3dB |
| Sephetho se Impedans | 200 | 1000 |
Tshebetso
Ho bulela le ho tima / ts'ebetso ea standby:
- Matla a ho sebetsa: Ha o hokela ho phepelo ea motlakase, E50 e kena boemong ba standby, skrine e bonts'a letheba le khanyang.
- Boemo ba standby:
Ha e sebetsa, tobetsa o hatelle konopo ea ho thetsa ea mesebetsi e mengata phanele e ka pele ho kenya boemo ba standby le ho tobetsa hakhutšoanyane ho tsoa boemong ba standby ha e le standby. Kapa o ka tobetsa konopo ea standby ka kotloloho ho remote control ho kena kapa ho tsoa boemong ba standby
Hlokomela:
Ha ts'ebetso ea standby ea othomathike e buletsoe, haeba kenyo ea hajoale
ha e ea hokela kapa lets'oao la ho kenya le fosahetse ka motsotso o le 1, le tla etsa joalo
kenya ka ho iketsa boemo ba standby.Hang ha e fumanwe
lets'oao le nepahetseng, le tla khutlela boemong ba ho sebetsa ka bohona
Tlhophiso ea molumo:
- Ho kenya le ho tsoa ha boemo ba semumu: Tobetsa konopo ea semumu ho remote control ho seta semumu, tobetsa konopo ea bumu hape kapa u fetole molumo ho tsoa boemong bo khutsitseng.
- Ho fetola molumo: Fetola molumo ka ho tobetsa konopo ea holimo/tlaase ho remote control. Tobetsa 'me u hatelle konopo ea holimo/tlase e tla fetola molumo kapele, ka hona, ela hloko ho sireletsa kutlo ea hau.
Hlokomela: Bolumo e tsitsitse ho 0dB ka mokhoa oa DAC mme ho feto-fetoha ha molumo ho fosahetse mokhoeng ona.
Kenya kanale : Tobetsa konopo ea ho ama e nang le mesebetsi e mengata phanele e ka pele kapa "Fetohela ho konopo e kentsoeng ea nakong e fetileng" le "Fetohela ho konopo e latelang ea ho kenya" ho remoutu e le hore u fetole mokhoa oa ho kenya.
Phetoho ea kanale e hlahisoang: Tobetsa konopo ea "Output channel switching" ho remote control kapa u tobe habeli konopo ea ho thetsa phanele e ka pele ho
fetola kanale ea tlhahiso. "0-1" e bontša feela tlhahiso ea RCA; "0-2" e bontša feela tlhahiso ea TRS; "0-3" e bontša hore RCA le TRS li hlahisoa ka nako e le 'ngoe.
Kenya lenane la ho seta:
Boemong ba standby, tobetsa 'me u tšoare konopo ea ho ama ea mefuta e mengata phanele e ka pele metsotsoana e 3 ho kenya lenane la ho seta la E50.
Fetola le ho boloka li-setting:
- Konopo ea ho ama phanele e ka pele: tobetsa konopo ea ho ama ho kenya ntho e latelang ea ho beha, tobetsa habeli konopo ea ho ama ho beha liparamente tse fapaneng. Tobetsa 'me u tšoare konopo ea ho thetsa ho fihlela "8-8" e hlaha skrineng ho boloka litlhophiso.
- Remoutu ea taolo: tobetsa konopo ea holimo / tlase ho kenya ntho e fetileng / e latelang ea ho seta, tobetsa konopo e ka ho le letšehali / ho le letona ho beha li-parameter tse fapaneng. Tobetsa 'me u tšoare konopo ea "OK" ho fihlela "8-8" e hlahisoa skrineng ho boloka litlhophiso
Ho beha litlhaloso:
Setlhophiso sa filthara ea PCM (e fumaneha bakeng sa tlhophiso ea taolo e hole, seta mokhoa oa filthara ea PCM ha o bapala PCM)
| Tlhaloso | Tlhaloso |
| F-1 | Theoha ka potlako ho linear(Default) |
| F-2 | Theoha butle ka linear |
| F-3 | Fast roll off bonyane |
Setting ea khanya ea skrine (E teng bakeng sa litlhophiso tsa remote control)
| Pontšo ea skrine | Tlhaloso |
| L-1 | Tlase |
| L-2 | Hare (Default) |
| L-3 | Phahameng |
| THE | Khanya e bohareng le skrini li tla tingoa ka ho iketsa ka mor'a metsotsoana e 30 ea ho se sebetse |
Boemo ba standby ba othomathiki (avaiast orarmots contlsoting)
| Pontšo ea skrine | Tlhaloso |
| AO | Auto on(Default) |
| AC | Auto tima |
Litlhophiso tsa mocha oa Line Out (E teng bakeng sa litlhophiso tsa remote control)
| Pontšo ea skrine | Tlhaloso |
| o-1 | RCA Outputonly |
| o-2 | TRS Outputonly |
| o-3 | Sephetho sa RCASTRS ka nako e le 'ngoe (Defaut) |
Litlhophiso tsa mokhoa oa ho tsoa
| Pontšo ea skrine | Tlhaloso |
| mp | Per-Amp MOKHOA(Molumo o ka feto-fetoha) (E ikhethile) |
| md | Mokhoa oa DAC (Bolumo e ke keng ea fetoloa) |
Khutlisa fektheri:
Boemong ba standby, tobetsa likonopo tsa Volume down, Volume Up le Ho khutsisa remote control ka tatellano ho khutlisetsa li-setting tsa feme.
Litokomane / Lisebelisoa
 |
TOPPING E50 DAC ea Ts'ebetso e Phahameng e nang le Kenyelletso ea Dijithale tse tharo [pdf] Bukana ea Mosebelisi E50 ya Tshebetso e Phahameng ya DAC e nang le Digital tse tharo, E50, DAC ya Tshebetso e Phahameng ka ho Kena tse tharo tsa Digital, DAC e Kenyelleditseng Digital tse tharo, Kenyo tse tharo tsa Digital, Kenyo ya Dijithale, Kenyo |
