ToolkitRC MC8 32 Bit Battery Multi-Checker Manual

Ketapele

Kea leboha ha u rekile MC8-multi-checker. Ka kopo bala bukana ena ka hloko pele u sebelisa sesebelisoa.

Litšoantšo tsa matsoho

• Keletso
• Bohlokoa
• Nomenclature

Tlhahisoleseling e 'Ngoe

Ho fumana lintlha tse ling mabapi le ts'ebetso le tlhokomelo ea sesebelisoa sa hau, ka kopo etela sehokelo se latelang:
www.toolkitrc.com/mc8

Mehato ea tšireletso

1. Karolo ea ts'ebetsotage ea MC8 e pakeng tsaDC7.0V le 35.0V. Netefatsa hore polarity ea mohloli oa matla ha e fetohe pele o sebelisoa.
2. Se ke oa sebetsa tlas'a mocheso o feteletseng, mongobo, libaka tse tukang le tse qhomang.
3. Le ka mohla u se ke ua tsamaea u sa lebelloa ha u sebetsa.
4. Hakolla mohloli oa matla ha o sa sebelisoe

Sehlahisoa se felileview

MC8 ke mochini o hlahlobang mefuta e mengata o etselitsoeng motho e mong le e mong oa ho itlosa bolutu. E na le pontšo e khanyang, e mebala ea IPS, e nepahetse ho isa ho 5mV.

• Mehato le ho leka-lekanya libeteri tsa LiPo, LiHV, LiFe le Lion.
• Voltage input DC 7.0-35.0V.
• E tšehetsa Main/Balance/Signal port power inputs.
• Mehato le liphetho tsa matšoao a PWM, PPM, SBUS.
• USB-A, USB-C dual-port output.
• USB-C 20W PD e tsoang ka potlako.
• Tšireletso ea ho tsoa ha betri ho feta tekano. E thibela tlhahiso ea USB ka bo eona ha betri e fihla maemong a bohlokoa.
• Ho nepahala ha tekanyo le ho leka-lekana: <0.005V.
• Tekanyo ea hona joale: 60mA.
• 2.0 inch, IPS e tletse viewpontsho ya angle.
• Qeto e phahameng ea 320 * 240 pixels.

Sebopeho

Pele

Ka morao

Tšebeliso ea pele

1. Hokela betri koung ea MC8, kapa hokela 7.0-35.0V voltage ho boema-kepe ba tlhahiso ea XT60 eaMC8.
2. Skrine e bonts'a logo ea boot bakeng sa metsotsoana e 0.5
3. Ka mor'a hore boot e phethoe, skrine e kena ka har'a sebopeho se seholo 'me e bontša ka tsela e latelang:
   
4. Fetola rolara ho tsamaisetsa pakeng tsa dimenu le dikgetho.
5. Tobetsa ka nako e khuts'oane kapa e telele ho rolara ho kenya ntho
6. Sebelisa selaela sa tlhahiso ho lokisa tlhahiso ea kanale.

Scroller e sebetsa ka tsela e fapaneng bakeng sa lintho tse fapaneng tsa menu, ka kopo sheba litaelo tse latelang.

Moqtage teko

Moqtage bonts'a le ho leka-lekana (lisele tsa motho ka mong)

Hokela boema-kepe ba betritotheMC8. Kamora hore sesebediswa se qale, maqephe a sehlooho hows the voltage ea sele ka 'ngoe- joalo ka ha ho bonts'itsoe ka tlase:

Li-bars tse mebala li bontša voltage ea betri ka litšoantšo. Sele e nang le matla a phahameng ka ho fetisisatage e hlahisoa ka bofubelu, ha sele e nang le molumo o tlase ka ho fetisisatage e bonts'itsoeng ka boputsoa. Kakaretso ea voltage le voltage phapang (e phahameng ka ho fetisisa voltage-tlase voltage) e bontšitsoe ka tlase.

Ho menu e kholo, tobetsa [lebili] ho qala ts'ebetso ea tekanyo. MC8 e sebelisa lihanyetsi tsa ka hare ho ntša (li)sele ho fihlela pakete e fihla bophahamong bo lekanangtage pakeng tsa lisele (<0.005V phapang).

1. Mehala e lekantsoe bakeng sa LiPO, ha e nepahale bakeng sa libeteri tse nang le lik'hemik'hale tse ling.
2. Ka mor'a ho leka-lekanya sephutheloana sa betri, tlosa betri ho MC8 ho thibela ho tsoa ho feta tekano.

Pakete ea betri ka kakaretso ea voltage

Hokela lead lead ho mainXT60portonthe MC8 ho bonts'a kakaretso ea voltage ea pakete ea betri, joalo ka ha ho bonts'itsoe ka tlase.

MC8 e bonts'a kakaretso ea voltage ea lik'hemik'hale tsohle tsa betri tse sebetsang ka meeli ea ho kenya.

Tekanyo ea lets'oao

Tekanyo ea lets'oao la PWM

Kamora hore sesebelisoa se bulele, tsamaisetsa ka ho le letona ho rolara ea tšepe ho kenya mokhoa oa Mela. Leqephe le hlahisoa ka tsela e latelang.

Tlhaloso ea UI
PWM: Mofuta oa lets'oao
1500: Hona joale PWM bophara ba sekhahla
20ms/5Hz : Potoloho ea hajoale le khafetsa ea lets'oao la PWM.

Ha o sebedisa tshebetso ya ho metha matshwao. Boema-kepe ba matšoao, boema-kepe ba ho leka-lekana, le boema-kepe bo ka sehloohong ba ho kenya li ka fana ka matla ho MC8.

Tekanyo ea lets'oao la PPM

Tlas'a mokhoa oa ho metha lets'oao la PWM, tobetsa ho "scroll" ebe o tsamaisetsa ho le letona ho fihlela PPM e bonts'oa. Joale letšoao la PPM le ka lekanyetsoa, ​​joalokaha ho bontšitsoe ka tlase.

SBUS Tekanyo ea lets'oao

Tlas'a mokhoa oa ho metha lets'oao la PWM, tobetsa tlase ho "scroll" ebe o tsamaisetsa ho le letona ho fihlela SBUS e bonts'oa. Joale letšoao la SBUS le ka lekanyetsoa, ​​​​joalokaha ho bontšitsoe ka tlase.

Sephetho sa lets'oao

Phatlalatso ea PWM Signal

Ha MC8 e butswe, tsamaisetsa ho le letona habedi hodima rolara ho kenya Output mode. Tobetsa ho thescrollerfor2seconds ho kenya mokhoa oa tlhahiso ea lets'oao, joalo ka ha ho bonts'itsoe ka tlase. Tlhaloso ea UI

Mokhoa: Mokhoa oa ho hlahisa matšoao- o ka fetoloa lipakeng tsa mekhoa ea matsoho le ea 3 ea lebelo le fapaneng.
Bophara : PWM lets'oao la phallo ea phallo ea bophara, rangelimit1000us-2000us. Ha e setetsoe ho manual, sutumelletsa selaete sa tlhahiso ea kanane ho fetola bophara ba lets'oao. Ha e setetsoe ho othomathiki, bophara ba leqhubu bo tla eketseha kapa bo fokotsehe.
Baesekele : Potoloho ea tlhahiso ea lets'oao la PWM. Range e fetolehang pakeng tsa 1ms-50ms.

1. Ha potoloho e behiloe ho tlase ho 2ms, bophara bo boholo bo ke ke ba feta boleng ba potoloho.
2. Selaela se hlahisoang ke kanale se sirelelitsoe ka polokeho. Ho ke ke ha ba le tlhahiso ea lets'oao ho fihlela slide e khutlisetsoa boemong ba eona bo tlase pele.

PPM Pontšo ea pontšo

Ho tsoa leqepheng la tlhahiso ea PWM, tobetsa hakhutšoanyane ho PWM ho fetola mofuta oa tlhahiso; tsamaisetsa ka ho le letona ho fihlela PPM e hlaha. Tobetsa nakoana ho netefatsa khetho ea PPM, joalo ka ha ho bonts'itsoe ka tlase:

Leqepheng la tlhahiso ea PPM, tobetsa fatše ontherollerfor2seconds ho beha boleng ba tlhahiso ea mocha ka mong.

1. Mocha oa throttle o ka laoloa feela ka ho sebelisa lets'oao le tsoang ho slider e hlahisoang; boleng bo ke ke ba fetoloa ho sebelisa rolara ka mabaka a tšireletso.
2. Netefatsa hore selaela sa tlhahiso se maemong a sona a tlase pele o etsa liteko.

Tlhahiso ea lets'oao la SBUS

Ho tsoa leqepheng la tlhahiso ea PWM, tobetsa hakhutšoanyane ho PWM ho fetola mofuta oa tlhahiso; tsamaisetsa ho le letona ho fihlela SBUS e hlaha. Tobetsa nakoana ho netefatsa khetho ea SBUS, joalo ka ha ho bonts'itsoe ka tlase:

Leqepheng la tlhahiso ea SBUS, tobetsa ontherollerfor2seconds ho beha boleng ba tlhahiso ea mocha ka mong.

1. Ha potoloho e behiloe ho tlase ho 2ms, bophara bo boholo bo ke ke ba feta boleng ba potoloho.
2. Selaela se hlahisoang ke kanale se sirelelitsoe ka polokeho. Ho ke ke ha ba le tlhahiso ea lets'oao ho fihlela slide e khutlisetsoa boemong ba eona bo tlase pele.

Ho tjhaja USB

Boema-kepe ba USB bo hahelletsoeng bo lumella mosebelisi ho tjhaja lisebelisoa tsa mehala ha a le leetong. Boema-kepe ba USB-A bo fana ka 5V1Aha boema-kepe ba USB-C bo fana ka ho tjhaja 20Wfast, ho sebelisoa melaoana e latelang: PD3.0,QC3.0,AFC,SCP,FCPetc.

Tobetsa o hatelle [Wheel] metsotsoana e 2 ho kenya lenane la litlhophiso, o ka seta USB cutoff voltage. Ha betri e tsoa ho feta boleng bo behiloeng, theMC8 e tla tima USB-A le USB-C ka bobeli; buzzer e tla boela e fane ka molumo o atolositsoeng, o bontšang matla a tšireletsotage fihlile.

Tlhophiso

Ka voltage, tobetsa 'me u tšoare [lebili] ho kenya litlhophiso tsa sistimi, joalo ka ha ho bonts'itsoe setšoantšong se ka tlase:

Tlhaloso:

Polokeho voltage: Ha betri e phahamatage e tlase ho boleng bona, tlhahiso ea USB e tla tima. Leseli le ka morao: tlhophiso ea khanya e bonts'ang, o ka beha 1-10.
Lerata: Molumo o potlakileng oa ts'ebetso, lithane tse 7 li ka thekesela kapa tsa tima.
Puo: Puo ea sistimi, lipuo tse 10 tse bonts'itsoeng li ka khethoa. Setaele sa Theme: setaele sa ponts'o, o ka beha lihlooho tse khanyang le tse lefifi.
Ea kamehla: Khutlisa boemong ba feme.
Khutlela: Khutlela ho voltage segokanyimmediamentsi sa sebolokigolo.
ID: Nomoro e ikhethang ea ID ea mochini.

Tekanyetso

Tobetsa 'me u tšoare rolara ha u ntse u kenya letsoho hoMC8ho kenya mokhoa oa ho lekanya, joalo ka ha ho bonts'itsoe ka tlase:

Lekanya bophahamo ba modumotage ea pakete ea betri e tjhakiloeng ka botlalo e sebelisang limithara tse ngata. Sebelisa rolara ho khetha Input, ebe u tsamaisetsa ho fihlela boleng bo lumellana le se lekantsoeng ho multimeter. Tsamaisetsa tlase ho boloka ebe o tobetsa tlase ho rolara ho boloka. Pheta ts'ebetso ena bakeng sa sele ka 'ngoe ha ho hlokahala. Ha o qetile, tsamaisetsa khethong ea ho tsoa ebe o tobetsa roller ho qeta ho lekanya.

Kenyo: Moqtage lekantsoeng ka sehloohong
XT60port. 1-8: Moqtage ea sele ka 'ngoe.
ADC: Boleng ba mantlha ba khetho e khethiloeng pele ho calib
Etsoa: Tloha ho mokhoa oa ho lekanya
Boloka: Boloka data ea calibration
Defau.: Khutlela ho litlhophiso tsa kamehla

Sebelisa li-multimeter feela tse nang le 0.001Vaccuracytoperform calibrations. Haeba multimeter e sa nepahale ka ho lekaneng, u se ke ua etsa calibration.

Litlhaloso

Kakaretso	Boema-kepe ba mantlha	XT60 7.0V-35.0V
	Ho kenya letsoho	0.5V-5.0V Lixx 2-8S
	Letšoao la ho kenya port	<6.0V
	Balance current	MAX 60mA @2-8S
	Ho leka-lekanya nepahalo	<0.005V @ 4.2V
	Sephetho sa USB-A	5.0V@1.0A firmware ntlafatsa
	Sephetho sa USB-C	5.0V-12.0V @MAX 20W
	Protocol ea USB-C	PD3.0 QC3.0 AFC SCP FCP
Tekanyo	PWM	500-2500us @20-400Hz
	PPM	880-2200us*8CH @20-50Hz
	SBUS	880-2200us * 16CH @20-100Hz
Sephetho	PWM	1000-2000us @20-1000Hz
	PPM	880-2200us * 8CH @50Hz
	SBUS	880-2200us *16CH @74Hz
Sehlahisoa	Boholo	68mm*50mm*15mm
	Boima ba 'mele	50g
Sephutheloana	Boholo	76mm*60mm*30mm
	Boima ba 'mele	100g
LCD		IPS 2.0 inch 240 * 240 resolution

 

Litokomane / Lisebelisoa

ToolkitRC MC8 32 Bit Battery Multi-Checker [pdf] Bukana ea Mosebelisi MC8 32 Bit Battery Multi-Checker, MC8, 32 Bit Battery Multi-Checker

Litšupiso

• Bukana ea Mosebelisi