TECH PSZ-02m Wired Relay Module
Setšoantšo sa ntoa
Boitsebiso ba Bohlokoa
Mojule oa PSZ-02m ke sesebelisoa sa elektroniki se nang le 2 e ikemetseng ea voltage-free relays e nolofalletsang mosebelisi ho laola li-circuits tsa ho phahamisa le ho theola li-roller shutter. E ka sebetsa le li-switches tse monostable. E etselitsoe ho kenngoa holim'a seporo sa DIN. Puisano le sesebelisoa se bohareng sa Sinum se etsoa ka mohala.
BOHLOKOA!
- Ho hokahanya shutter ea rolara ho liphetho tsa module ka morao ho tla fella ka ts'ebetso e fosahetseng ea sesebelisoa le calibration e fosahetseng.
- Pele o sebelisa mojule ka lekhetlo la pele, li-switches tsa moeli oa shutter li lokela ho beoa ka nepo.
- Ka mor'a mehato e meng le e meng e leshome ea "roller shutter", calibration ea othomathike e etsahala - "roller shutter" e fallela sebakeng se feteletseng ebe e khutlela sebakeng se behiloeng.
- Sesepa sa li-roller se laoloa ka ho sebelisa matla kamehla ho tataiso e fanoeng ea ts'ebetso ea li-roller shutter.
HLOKOMELA:
- Mehato e lokelang ho lateloa ka mor'a ho ngolisa le ho eketsa mojule ho sesebelisoa sa Sinum Central, ho litlhophiso tsa module [Litlhophiso > Lisebelisoa > Lisebelisoa tsa SBUS >
(taeleng ea sesebelisoa)]:
- khetha mofuta oa lifofu tseo u nang le tsona: ho fifala kapa ho sekamela
- ha u khetha sefofu sa rolara, u boetse u lokela ho khetha angle e sekametseng: 90o lub 180o
- etsa calibration
- Tobetsa konopo 1 e qala mokhoa oa ho lekanya.
- Mamello pakeng tsa bophahamo bo behiloeng ts'ebelisong ea Sinum le boemo ba 'nete ba bolelele bo foufetseng ba rolara e ka ba max. 5%.
- Ha mofuta o mocha oa software ea sesebelisoa o fumaneha [Litlhophiso > Setsi sa ntlafatso > Lisebelisoa tsa SBUS], o ka e ntlafatsa.
TAOLAO MOTSAMAI
Ha u ntse u tšoere konopo ea "roller shutter up/down":- ka tlase ho metsotsoana e 1.5 - fetola angle ea likarolo tsa shutter
- ho feta metsotsoana e 1.5 - phetoho ea boemo ba ho bula li-roller shutter
Tlhaloso
Phepelo ea motlakase
Puisano- 1-2 Boemo ba hajoale ba voltage-free output (ON/OFF)
Mokhoa oa ho ngolisa sesebelisoa tsamaisong ea sinum
Sesebelisoa se lokela ho hokahanngoa le sesebelisoa se bohareng sa Sinum se sebelisa sehokelo sa SBUS (3) , ebe o kenya aterese ea sesebelisoa sa Sinum bohareng ho sebatli ebe o kena ho sesebelisoa. Ka phanele ka sehloohong, tobetsa ea Di-setting > Disebediswa > Disebediswa tsa SBUS > (+)> Eketsa sesebediswa. Ebe o tobetsa konopo ea ho ngolisa ka bokhutšoanyane (2) sesebelisoa. Ka mor'a ts'ebetso ea ho ngolisa hantle, molaetsa o nepahetseng o tla hlaha skrineng. Ho feta moo, mosebelisi a ka reha sesebelisoa mme a se abela kamore e itseng.
Mokhoa oa ho khetholla sesebelisoa tsamaisong ea Sinum
Ho tsebahatsa sesebelisoa ho Sinum Central, kenya mokhoa oa ho tsebahatsa ho Li-setting > Lisebelisoa > Lisebelisoa tsa SBUS >(+) > Identification Mode tab 'me u tšoare konopo ea ho ngolisa sesebelisoa ka metsotsoana e 3-4. Sesebelisoa se sebelisitsoeng se tla totobatsoa skrineng.
Lintlha tsa tekheniki
| Phepelo ea motlakase | 24V DC ± 10% |
| Max. tshebediso ya matla | 1W |
| Mocheso oa ts'ebetso | 5°C ÷ 50°C |
| E lekantsoeng mojaro oa voltagho ikopanya le e-mahala 1-2 | 230V AC / 0,5A (AC1)* |
| Mongobo o amohelehang oa tikoloho | <80% REL.H |
Lintlha
Balaoli ba TECH ha ba ikarabelle bakeng sa tšenyo leha e le efe e bakoang ke tšebeliso e fosahetseng ea tsamaiso. Moetsi o na le tokelo ea ho ntlafatsa lisebelisoa, ho ntlafatsa software le litokomane tse amanang le tsona. Grafiken e fanoe ka sepheo sa papiso feela mme e ka fapana hanyane le chebahalo ea 'nete. Litšoantšo li sebetsa joalo ka mohlalaamples. Liphetoho tsohle li nchafatsoa ka mokhoa o tsoelang pele ho latela tsa moetsi websebaka.
Pele u sebelisa sesebelisoa ka lekhetlo la pele, bala melao e latelang ka hloko. Ho se mamele litaelo tsena ho ka lebisa likotsing tsa motho kapa tšenyo ea molaoli. Sesebelisoa se lokela ho kenngoa ke motho ea tšoanelehang. Ha ea rereloa ho sebetsoa ke bana. Ke sesebelisoa sa motlakase se phelang. Etsa bonnete ba hore sesebelisoa se khaotsoe ho tsoa ho mains pele se etsa mesebetsi efe kapa efe e amanang le phepelo ea motlakase (ho kenya likhoele, ho kenya sesebelisoa joalo-joalo). Sesebelisoa ha se na metsi.
Sehlahisoa se se ke sa lahleloa ka har'a linkho tsa litšila tsa ka tlung. Mosebelisi o tlamehile ho fetisetsa lisebelisoa tsa hae tse sebelisitsoeng sebakeng sa pokello moo likarolo tsohle tsa motlakase le tsa elektroniki li tla sebelisoa hape.
Phatlalatso ea EU ea ho lumellana
Tech Sterowniki II Sp. z ul. Biała Droga 34, Wieprz (34-122)
Ka hona, re phatlalatsa tlas'a boikarabello ba rona hore modul PSZ-02m e tsamaisana le Taelo :
• 2014/35/UE • 2014/30/UE • 2009/125/WE • 2017/2102/UE
Bakeng sa tlhahlobo ea tumellano, ho ile ha sebelisoa litekanyetso tse lumellanang:
- PN-EN 60669-1: 2018-04
- PN-EN 60669-1:2018-04/AC:2020-04E
- PN-EN 60669-2-5:2016-12
- EN IEC 63000:2018 RoHS Wieprz, 01.08.2023
Tšehetso ea Bareki
Lingoliloeng tse felletseng tsa phatlalatso ea EU ea tumellano le bukana ea mosebelisi li fumaneha kamora ho skena
QR code kapa atk www.tech-controllers.com/manuals
http://www.techsterowniki.pl/manuals
http://www.tech-controllers.com/manuals
TECH STEROWNIKI II Sp. z oo
ul. Biała Droga 31
34-122 Wieprz
mohala: +48 33 875 93 80 www.tech-controllers.com
support.sinum@techsterrowniki.pl
Litokomane / Lisebelisoa
 |
TECH PSZ-02m Wired Relay Module [pdf] Buka ea Taelo PSZ-02m Wired Relay Module, PSZ-02m, Wired Relay Module, Relay Module |
