TECH F21 Mini Printer
Litlhaloso
- Theknoloji ea Khatiso: Thermal printing (inkless)
- Mofuta oa khatiso: Botsho & bosweu
- Mofuta oa Pampiri: Thermal pampiri rolls
- Bophara ba Pampiri: 57 limilimithara
- Qeto ea ho Printa: 203 DPI
- Lebelo la ho Hatisa: Approx. 10–15 mm/s
- Khokahano: bluetooth
- Lisebelisoa tse Lumellanang: Android, iOS
- Lisebelisoa tse Tšehetsoang: Dedicated mobile printing app (varies by region)
- Mofuta oa Leshala: Betri ea lithium e ka nchafatsoang
- Bokhoni ba Betri: ~ 1000 mAh
- Mokhoa oa ho tjhaja: USB (Type-C or Micro-USB, model dependent)
- Tshebetso Voltage: 5V
- Boitsebiso: Plastiki ea ABS
- Boholo: Compact / portable
- Boima ba 'mele: Lightweight (approx. 150–200 g)
- Supported Printing: Text, images, labels, QR codes, barcodes
Ho batle phoso
Printer ha e bulele
- Netefatsa hore betri e tjhajilwe.
- Leka thapo e fapaneng ea USB kapa mohloli oa matla.
- Press and hold the power button for 3–5 seconds.
Bluetooth ha e hoketsoe
- Turn Bluetooth OFF and ON again on your phone.
- Ensure the printer is not connected to another device.
- Reinstall or update the printer app.
- Keep the printer within 1–2 meters during pairing.
Blank or unclear printing
- Check that thermal paper is loaded correctly (print side facing out).
- Use compatible thermal paper only.
- Clean the print head gently.
- Ensure battery level is sufficient.
Paper not feeding properly
- Reinstall the paper roll correctly.
- Avoid overloading the paper compartment.
- Remove jammed paper carefully.
App ha e arabe
- Koala le ho bula sesebelisoa hape.
- Check app permissions (Bluetooth, storage).
- Qala fono ya hao botjha.
Tlhokomelo le Tlhokomelo
- Sebelisa only recommended thermal paper to avoid print head damage.
- Keep the printer dry and away from heat or direct sunlight.
- Clean the print head periodically with a soft, dry cloth.
- Do not pull paper forcefully while printing.
- Charge the battery at least once every 2–3 months if not in use.
- Avoid dropping or applying pressure to the device.
- Store in a dust-free environment when not in use.
Kenyelletso ea Sehlahisoa
1.1 Lenane la ho Paka
O The quantity and specifications of the paper roll(s) are tailored to the package you’ve chosen.
1.2 Taelo ea Likarolo tsa Printer
Rea qala
2.1 Ho jarolla sesebelisoa
Batla the “FaithTag” app on App Store@ or Google PlayTM for download and installation.
2.2 Tataiso ea mosebelisi
O Before starting printing, please ensure that the paper roll is properly loaded into the paper compartment. For detailed instructions, refer to the manual section “3. Replacing the Paper Roll.”
Ho bulela printa, tobetsa Konopo ea Matla ka nako e telele metsotsoana e meraro ho fihlela Leseli la Indicator le bulehile.
Open the “FaithTag”Sesebelisoa. 
Fana ka tumello.
Tobetsa [Hokela] ka holimo.
Connection complete. Tap the homepage to view scriptures.
View scripture details, then tap print.
Access preview, then tap [Print].
Ho phethoa ho hatisoa.
Hlōla leibole haufi le Ho Tsoa ha Pampiri.
Tlosa tšehetso.
Khomaretsa leibole sebakeng se omeletseng, se bataletseng.
Sebopeho sa software ke sa litšupiso feela. Ka kopo, sheba leqephe la sebele la ts'ebetso ho fumana lintlha tse nepahetseng.
Ho fetola Pampiri ea Roll
Ntša pampiri e ncha ea pampiri.
O Please skip this step if the paper roll you have is not newly purchased and boxed.
Push the Cover Open Button towards the arrow to take out the Paper RollSpindle.
Hula e suthehang damper to remove the paper roll to be replaced.
Some paper rolls include tubes. Remove the paper tube after running out.
Kenya karolo e le 'ngoe ea spindle moqolong oa pampiri o tla kenngoa.
Kenya hape Movable Damper le ho e sutumelletsa pheletsong ea moqolo oa pampiri.
Tlosa Setikara sa Anti-lokolla pampiring.
Beha moqolo oa pampiri ka Phateng ea Pampiri.
Hula Pampiri Ho fihlela e fetela ka nģ'ane ho Paper Output Slot, ebe u koala Flip Cover.
Litaelo tsa Tšireletseho
5.1 Manual Cutter le Print Head Litaelo
Warning: Sharp edges on Manual Cutter! Do not touch the edges.
Warning: HOT component! Touching it when it is hot can cause burns to your fingers. Please wait for at least 30 minutes after turning off the power before touching it.
5.2 Litaelo tsa ho tjhaja
1. Please prepare your own power adapter (DC 5V/2A) with a Type-A port.
2. Insert the Type-C end (flat end) of the USB cable into F21’s Type-C Charger Port and plug the Type-A end (wide end) into the Type-A port of the power adapter.
3. After connecting and plugging in, please check the status of the printer indicator light. When the printer is charging, the indicator light will be flashing slowly with a “white light”.
4. Please charge for at least 20 minutes to meet quick usage; charging for 2-3 hours will complete the charging, or the following two states indicate full charge:when turned on, the indicator light stays “white”; when turned off, the light goes out.
5. As the printer may heat up during charging, avoid placing it on materials such as cotton or linen.
6. Once the battery is fully charged, please unplug the charger promptly.
O Avoid using the printer while charging.Using the printer while charging may lead to reduced charging speed, compromised print quality, and shortened battery life.
5.3 Tlhoekiso le Tlhokomelo
O Please make sure the printer is turned off before performing any cleaning or maintenance.
Haeba u kopana le litaba tse joalo ka mela e se nang letho, mongolo o lerootho, kapa litlhaku tse sieo, sena se ka bakoa ke litšila tse Hloohong ea Printa. Ka kopo latela mehato ena:
If you have just finished printing, wait for at least 30 minutes for the Print
01 Head to cool down completely. Use a cotton swab dipped in alcohol or a print head cleaning pen (purchased
02 separately) to gently wipe the surface of the Print Head about 5 times to remove any dust and stains. Wait 5-10 minutes for the alcohol to evaporate completely. Thus, the cleaning
03 is done, and you can continue using the printer.
Lintlha ho Mosebelisi
6.1 TLHOKOMELISO ea FCC
Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC.
Operation is subject to the ollowing two conditions:
(1) sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi, le
(2) sesebelisoa sena se tlameha ho amohela tšitiso leha e le efe e amoheloang, ho kenyelletsa le tšitiso e ka bakang ts'ebetso e sa batleheng.
Liphetoho leha e le life kapa liphetoho tse sa amoheloang ka ho hlaka ke mokha o ikarabellang bakeng sa ho lumellana le melaoana li ka senya matla a mosebedisi a ho sebelisa thepa.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely tocause harmful interference in which case the user will be required to correct the interference at his own expense.
Sesebelisoa se hlahlobiloe ho kopana le polelo e akaretsang ea RF.
Sesebelisoa se ka sebelisoa maemong a ponts'o a nkehang ntle le thibelo.
6.2 TSEBISO YA ISED(Canada)
– Senyesemane:
This device contains licence-exempt that comply with Innovation, Science and Economic Development Canada’ s licence-exempt RSS(s).
Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
(1) Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso.
(2) Sesebelisoa sena se tlameha ho amohela tšitiso leha e le efe, ho kenyelletsa le tšitiso e ka bakang ts'ebetso e sa batleheng ea sesebelisoa.
Polelo ea ho pepeseha ha IC RF:
Sesebediswa se hlahlobilwe ho kopana le ditlhoko tse akaretsang tsa IC RF. Sesebelisoa se ka sebelisoa maemong a ponts'o a nkehang ntle le thibelo.
WARNING Please pay attention to electrical safety. Do not disassemble, crush or puncture the battery. This product is not a toy.
Lintlha Tse Khethehileng
Khampani e jara boikarabelo bo felletseng ba tokiso le tlhaloso ea bukana ena, e sebetsa ka thata ho netefatsa bonnete ba eona.
Nevertheless, please note that any technical improvements to the product may not be separately notified, and that the images of the product, accessories, software interfaces, etc. in this manual serve solely as illustrations and references. Due to product updates and upgrades, theactual product may vary slightly from the images. Please refer to the physical product for accurate representations.
Litokomane / Lisebelisoa
 |
TECH F21 Mini Printer [pdf] Bukana ea Mosebelisi 2BSMY-F21, 2BSMY-F21, F21 Mini Printer, F21, Mini Printer, Printer |