Tlhahisoleseding ya Sehlahiswa

EU-2801 WiFi ke taolo ea likamore tse nang le merero e mengata e etselitsoeng ho laola liboiler tsa khase ka protocol ea puisano ea OpenTherm. E lumella basebelisi ho laola mocheso oa kamore (CH circuit) le mocheso oa metsi a chesang a malapeng (DHW) ntle le tlhokahalo ea ho ea kamoreng ea boiler.

Mesebetsi e fanoang ke molaoli e kenyelletsa:

• Taolo e bohlale ea mocheso oa kamore
• Taolo e bohlale ea mocheso oa boiler oa CH o behiloeng esale pele
• Ho fetola mocheso oa kamore e behiloeng esale pele ho latela mocheso oa hajoale oa kantle (taolo e thehiloeng ho boemo ba leholimo)
• Ntlo ea beke le beke le kemiso ea ho futhumatsa ea DHW
• Ho tsebisa ka lialamo tsa sesebelisoa sa ho futhumatsa
• Oache ea alamo
• Notlela Auto
• Mosebetsi o thibelang ho emisa

Lisebelisoa tsa taolo li kenyelletsa skrineng se seholo sa ho ama, sensor ea kamore e hahelletsoeng ka har'a kamore, le moralo o khonang ho theoa.

Sephutheloana se boetse se kenyelletsa sensor ea kamore ea C-mini, e lokelang ho ngolisoa sebakeng se itseng sa ho futhumatsa. Sensor ea C-mini e fana ka molaoli ea ka sehloohong ka ho bala mocheso oa kamore ea hona joale.

Lintlha tsa tekheniki tsa sensor ea C-mini:

• Mefuta e fapaneng ea tekanyo ea mocheso
• Khafetsa ea ts'ebetso
• Ho nepahala ha tekanyo
• Phepelo ea matla: betri ea CR2032

Litaelo tsa Tšebeliso ea Sehlahisoa

Ho kenyaHlokomela: Taelo ea lithapo tse hokelang sesebelisoa sa OpenTherm le EU-2801 WiFi controller ha e na taba.

1. Hakolla molaoli ho tsoa ho mains pele o etsa mesebetsi efe kapa efe e amanang le phepelo ea motlakase.
2. Hlahisa selaoli sa WiFi sa EU-2801 le sensor ea kamore ea C-mini u sebelisa lithapo tse fanoeng.

Tlhaloso ea Sekrine se ka SehloohongSesepa sa mantlha sa molaoli se fana ka likhetho le tlhaiso-leseling e fapaneng:

1. Module ea WiFi
2. Letsatsi le nako
3. Mokhoa
4. Litlhophiso tsa skrine
5. Litlhophiso tsa oache ea alamo
6. Tshireletso Heating potoloho
7. Litlhophiso tsa metsi a chesang
8. Taolo ea beke le beke
9. Puo
10. Mofuta oa software
11. Menu ya tshebeletso

Controller MenuLenaneo la taolo le fana ka litlhophiso le likarolo tse ngata:

• Khetho ea marang-rang ea WiFi
• DHCP ea ho ngolisa
• Mofuta oa module
• Litlhophiso tsa oache
• Litlhophiso tsa letsatsi
• Phokotso ea ho futhumatsa ka ho iketsa
• Ke Mokha oa DHW feela
• Absent Holiday OFF
• Screen saver
• Khanya ea skrine
• Ho koala skrineng
• Nako ea ho koala
• E sebetsa matsatsing a khethiloeng
• E sebetsa hang
• Nako ea ho tsoha
• Tsatsi la ho tsoha
• Ho notlela ka ho iketsa HO BUTSE
• Koala ka bohona
• PIN khoutu-auto-lock

POLOKO

Pele o sebelisa sesebelisoa ka lekhetlo la pele mosebelisi o lokela ho bala melao e latelang ka hloko. Ho se mamele melao e kenyellelitsoeng bukaneng ena ho ka lebisa likotsing tsa motho kapa tšenyo ea molaoli. Bukana ea mosebelisi e lokela ho bolokoa sebakeng se sireletsehileng bakeng sa ho sebelisoa hape. E le ho qoba likotsi le liphoso ho lokela ho netefatsoa hore motho e mong le e mong ea sebelisang sesebelisoa o itloaetse molao-motheo oa ts'ebetso hammoho le mesebetsi ea ts'ireletso ea molaoli. Haeba sesebelisoa se lokela ho rekisoa kapa ho beoa sebakeng se seng, etsa bonnete ba hore bukana ea mosebelisi e teng le sesebelisoa e le hore mosebelisi ofe kapa ofe ea ka bang teng a ka fumana lintlha tsa bohlokoa mabapi le sesebelisoa. Moetsi ha a amohele boikarabello bakeng sa likotsi leha e le life kapa tšenyo e bakoang ke ho se tsotelle; ka hona, basebelisi ba tlamehile ho nka mehato e hlokahalang ea polokeho e thathamisitsoeng bukaneng ena ho sireletsa bophelo ba bona le thepa ea bona.

TLHOKOMELO 

• Vol e phahamengtage! Etsa bonnete ba hore molaoli o khaotsoe ho tloha mochine o motlakase pele o etsa mesebetsi leha e le efe e amanang le phepelo ea motlakase (lithapo tsa plugging, ho kenya sesebelisoa joalo-joalo).
• Sesebelisoa se lokela ho kenngoa ke setsebi sa motlakase se tšoanelehang.
• Molaoli ha oa lokela ho sebetsoa ke bana.
• Sesebelisoa se ka senyeha haeba se otloa ke lehalima. Etsa bonnete ba hore polaka e khaotsoe phepelong ea motlakase nakong ea sefefo.
• Tšebeliso efe kapa efe ntle le e boletsoeng ke moetsi e thibetsoe.
• Pele le nakong ea nako ea ho futhumatsa, molaoli o lokela ho hlahlojoa hore na boemo ba likhoele tsa oona ke bofe. Mosebelisi o boetse o lokela ho hlahloba hore na molaoli o kentsoe hantle le ho e hloekisa haeba e le lerole kapa e litšila.

Liphetoho tsa thepa e hlalositsoeng bukeng ena e kanna ea hlahisoa kamora hore e phetheloe ka la 11.08.2022. Moetsi o na le tokelo ea ho hlahisa liphetoho mohahong. Lipapiso li ka kenyelletsa lisebelisoa tse eketsehileng. Theknoloji ea ho hatisa e ka etsa hore ho be le phapang ea mebala e bontšitsoeng.

Re ikemiseditse ho sireletsa tikoloho. Ho etsa lisebelisoa tsa elektroniki ho fana ka tlamo ea ho fana ka ts'ireletso ea tikoloho ea lisebelisoa le lisebelisoa tsa elektroniki tse sebelisitsoeng. Kahoo, re kentsoe rejisetarang e bolokiloeng ke Tlhahlobo ea Tšireletso ea Tikoloho. Letšoao la moqomo o tšetsoeng holim'a sehlahisoa le bolela hore sehlahisoa se se ke sa lahleloa ka har'a lijana tsa litšila tsa ntlo. Ho tsosolosa litšila ho thusa ho sireletsa tikoloho. Mosebelisi o tlamehile ho fetisetsa lisebelisoa tsa hae tse sebelisitsoeng sebakeng sa pokello moo likarolo tsohle tsa motlakase le tsa elektroniki li tla sebelisoa hape.

TLHALOSO SESEBETSI

EU-2801 WiFi tsamaiso ea likamore tse nang le merero e mengata e etselitsoe ho laola liboiler tsa khase ka protocol ea puisano ea OpenTherm. Sesebelisoa se nolofalletsa mosebedisi ho laola mocheso oa kamore (CH potoloho) hammoho le mocheso oa metsi a chesang a malapeng (DHW) ntle le tlhokahalo ea ho ea kamoreng ea boiler.
Mesebetsi e fanoang ke molaoli:

• Taolo e bohlale ea mocheso oa kamore
• Taolo e bohlale ea mocheso oa boiler oa CH o behiloeng esale pele
• Ho fetola mocheso oa kamore e behiloeng esale pele motheong oa mocheso oa kantle oa hajoale (taolo e thehiloeng ho boemo ba leholimo)
• Kemiso ea ho futhumatsa ntlo ea beke le beke le DHW
• Ho tsebisa ka lialamo tsa sesebelisoa sa ho futhumatsa
• Oache ea alamo
• Notlela Auto
• Mosebetsi o thibelang ho emisa

Lisebelisoa tsa taolo:

• Skrine se seholo sa ho ama
• Sensor ea kamore e hahiloeng
• E ntlafalang

Ho molaoli oa WiFi oa EU-2801 ho kentsoe sensor ea kamore ea C-mini. Sensor e joalo e kentsoe sebakeng se khethehileng sa ho futhumatsa. E fana ka molaoli ea ka sehloohong oa ho bala mocheso oa kamore. Sensor ea kamore e lokela ho ngolisoa sebakeng se itseng.
Ho e etsa, sebelisa . Khetha letšoao ebe o tobetsa konopo ea puisano ho sensor e itseng ea C-mini. Hang ha ts'ebetso ea ho ngolisa e phethiloe ka katleho, pontšo ea molaoli ea ka sehloohong e tla bontša molaetsa o nepahetseng.
Hang ha e ngolisitsoe, sensor e ke ke ea ngolisoa, empa e tima feela.
Lintlha tsa tekheniki tsa sensor ea C-mini:

Mefuta e fapaneng ea tekanyo ea mocheso	-300C÷500C
Khafetsa ea ts'ebetso	868MHz
Ho nepahala ha tekanyo	0,50C
Phepelo ea motlakase	CR2032 betri

MOKHOA OA HO KENYA

Molaoli o lokela ho kenngoa ke motho ea tšoanelehang. Sesebelisoa se reretsoe ho kenngoa leboteng.

TLHOKOMELO
Selaoli sa WiFi sa EU-2801 se reretsoe ho kengoa ka har'a lebokose le nang le flush-mounting. E tsamaisoa ka 230V/50Hz - thapo e lokela ho hokeloa ka kotloloho setsing sa khokahano sa molaoli. Pele o kopanya / o harola, khaola motlakase.

1. Hokela sekoahelo se ka morao leboteng sebakeng seo molaoli oa kamore ka lebokoseng la motlakase a tla kenngoa.
2. Hokela lithapo.
   HLOKOMELA
   Taelo ea lithapo tse hokelang sesebelisoa sa OpenTherm le EU-2801 WiFi controller ha e na taba.
3. Kenya lisebelisoa holim'a li-latches.

TLHALOSO SEHLOHONOLO

1. Mokhoa oa hona joale oa ts'ebetso ea boiler ea CH
2. Nako ea hajoale le letsatsi la beke - tlanya konopo ena ho beha nako le letsatsi la beke.
3. Letšoao la CH boiler:
   • lelakabe ka har'a boiler ea CH - CH boiler e sebetsa
   • ha ho lelakabe - CH boiler ke damped
4. Thempereichara ea DHW ea hajoale le e setiloe esale pele - tlanya letšoao lena ho fetola mocheso o behiloeng esale pele oa metsi a chesang a lapeng.
5. Mocheso oa kamore ea hona joale le e seng e setiloe - tlanya lets'oao lena ho fetola mocheso o behiloeng esale pele.
6. Mocheso oa ka ntle
7. Kenya lenane la taolo
8. Letšoao la WiFi - tlanya aekhoneng ena ho lekola matla a lets'oao, nomoro ea IP le view Litlhophiso tsa module ea WiFi.

MOLAOLI MENU

THIBELA TŠEBELETSO EA MAIN MENU

WIFI MODULE

Mojule oa Marang-rang ke sesebelisoa se nolofalletsang mosebelisi taolo ea hole ea sistimi ea ho futhumatsa. Mosebelisi o laola boemo ba lisebelisoa tsohle tsa sistimi ea ho futhumatsa skrineng sa komporo, letlapa kapa mohala oa thekeng.
Kamora ho bulela mojule le ho khetha khetho ea DHCP, molaoli o jarolla ka ho iketsa li-parameter ho tsoa marang-rang a lehae.

Litlhophiso tse hlokahalang tsa marang-rang 

E le hore mojule oa Inthanete o sebetse hantle, ho hlokahala hore u kopanye module ho marang-rang ka seva sa DHCP le port 2000 e bulehileng.
Ka mor'a ho hokahanya mochine oa Inthanete ho marang-rang, e-ea ho menu ea litlhophiso tsa module (ho mookameli oa molaoli).
Haeba marang-rang a se na seva sa DHCP, mochine oa Inthanete o lokela ho lokisoa ke molaoli oa oona ka ho kenya litekanyo tse nepahetseng (DHCP, IP address, Gateway address, Subnet mask, DNS address).

1. Eya ho menu ea litlhophiso tsa module ea WiFi.
2. Khetha "ON".
3. Sheba hore na khetho ea "DHCP" e khethiloe.
4. Eya ho "Khetho ea netweke ea WIFI"
5. Khetha marang-rang a hau a WIFI ebe u kenya phasewete.
   1. Ema nakoana (hoo e ka bang 1 min) 'me u hlahlobe hore na aterese ea IP e fanoe. E-ea tabeng ea "IP address" 'me u hlahlobe hore na boleng bo fapane le 0.0.0.0 / -.-.-.-.
      • a) Haeba boleng bo ntse bo le 0.0.0.0 / -.-.-.-.- , hlahloba litlhophiso tsa marang-rang kapa khokahanyo ea Ethernet pakeng tsa mochine oa Inthanete le sesebelisoa.
   2. Ka mor'a hore aterese ea IP e abeloe, qala ngoliso ea mojule e le hore u hlahise khoutu e lokelang ho fuoa akhaonto ka kopo.

LETSATSI LE NAKO

LIEKETSENG TŠEBELE
Khetho ena e sebelisoa ho seta nako ea hajoale e hlahang skrineng se seholo view. Sebelisa litšoantšo: le ho seta boleng bo batloang le ho netefatsa ka ho tobetsa OK

LIEKETSENG LETSATSI
Khetho ena e sebelisoa ho seta nako ea hajoale e hlahang skrineng se seholo view. Sebelisa litšoantšo: le ho seta boleng bo batloang le ho netefatsa ka ho tobetsa OK.

MOKHOA

Mosebelisi a ka khetha e 'ngoe ea mekhoa e robeli e fumanehang.

TS'OANELO
Molaoli o sebetsa ho ea ka lenaneo la nakoana le hlalositsoeng ke basebelisi - ho futhumatsa ntlo le ho futhumatsa DHW feela ka lihora tse boletsoeng esale pele.

PHETHA
Molaoli o sebetsa ho latela parameter (ka submenu) le parameter (ka submenu) ho sa tsotelehe nako ea hajoale le letsatsi la beke.

PUSELETSO LEKHOTLA
Molaoli o sebetsa ho latela parameter (ka submenu) le parameter (ka submenu) ho sa tsotelehe nako ea hajoale le letsatsi la beke. Bakeng sa ts'ebetso ena ho hlokahala ho sebelisa phokotso ea ho fokotsa mocheso.

FEELA DHW
Mookameli o tšehetsa feela potoloho ea metsi a chesang (ho futhumatsa potoloho e tima) ho ea ka litlhophiso (beha ka har'a submenu) le litlhophiso tsa beke le beke.

MOKHATLO
Molaoli o sebetsa ho latela parameter (ka submenu) le parameter (ka submenu) bakeng sa nako e hlalositsoeng ke mosebelisi.

NTJA
Li-circuits ka bobeli li lula li sa sebetse ho fihlela nako e hlalositsoeng ke mosebelisi. Ke ts'ebetso e thibelang leqhoa feela e lulang e sebetsa (haeba e se e kentsoe pele).

LETSATSI LETSATSI
Li-circuits ka bobeli li lula li sa sebetse ho fihlela letsatsi le hlalositsoeng ke mosebelisi. Ke ts'ebetso e thibelang leqhoa feela e lulang e sebetsa (haeba e se e kentsoe pele).

TLOA
Molaoli o tima lipotoloho ka bobeli ka nako e sa boleloang. Ke ts'ebetso e thibelang leqhoa feela e lulang e sebetsa (haeba e se e kentsoe pele).

LIEKETSENG TSEKO
mosebelisi a ka fetola litlhophiso tsa skrine ho latela litlhoko tsa motho ka mong.

LIEKETSENG TŠEBELE
Ts'ebetso ena e sebelisetsoa ho hlophisa li-setting tsa oache.

• TIMA - ha khetho ena e khethiloe, ts'ebetso ea oache ea alamo ha e sebetse.
• E sebetsa matsatsing a khethiloeng - Oache ea alamo e lla feela ka matsatsi a khethiloeng.
• Hang - Ha khetho ena e khethiloe, oache ea alamo e tima hang feela ka nako e behiloeng esale pele ea ho tsoha.
• Nako ea ho tsoha - Sebelisa litšoantšo ho beha nako ya ho tsoha. Tobetsa ho tiisa.
• Letsatsi la ho tsoha - Sebelisa litšoantšo ho beha letsatsi la ho tsoha. ap ka ho tiisa.

TS'IRELETSO

Ts'ebetso ena e thusa mosebelisi ho kenya tšebetsong le ho tima "auto-lock". Ha "auto-lock" e sebetsa, ho hlokahala hore u kenye PIN khoutu e le hore u fihlele menu ea "controller".

HLOKOMELA
PIN khoutu ea kamehla ke "0000".

TS'ELISO TS'ELISO

* E bonts'itsoeng ha e tshebetso e kentswe tshebetsong
** E bonts'itsoeng ha ho tshebetso e butswe

MOFUTA TAOLI

• Mocheso o tsitsitseng - ha khetho ena e sebetsa, mosebelisi a ka hlophisa liparamente tse fumanehang ho menyu e nyane.
• Litlhophiso - mosebetsi ona o sebelisetsoa ho hlalosa mocheso oa boiler oa CH o behiloeng esale pele ntle le tšebeliso ea sensor ea ka ntle. Mosebelisi a ka beha mocheso o lakatsehang oa boiler ea CH. Boiler e lula e sebetsa linakong tse hlalositsoeng kemisong ea Beke. Ka ntle ho linako tsena sesebelisoa ha se sebetse. Ho feta moo, ha ts'ebetso ea thermostat e kentsoe tšebetsong, boiler ea CH ke damped ha mocheso oa kamore o behiloeng esale pele o fihlile (ha ts'ebetso ea thermostat e tima, ho fihla mocheso oa kamore e behiloeng esale pele ho tla fella ka ho fokotsa mocheso oa boiler oa CH o behiloeng esale pele). Kamore e tla futhumatsoa ho fihlela mocheso o behiloeng esale pele ka linako tse hlalositsoeng kemisong ea Beke.
• The mosebetsi - Paramethara ena e hokahane le kemiso ea Beke le Beke e nolofalletsang mosebelisi ho hlalosa linako tsa letsatsi le leng le le leng la beke ha boiler ea CH e tla sebetsa ho latela litlhophiso tsa mocheso tse behiloeng esale pele. Ka mor'a ho kenya thermostat le ho beha mosebetsi oa ho fokotsa mocheso ho Fokotsa, mochine oa CH o tla sebetsa ka mekhoa e 'meli. Linakong tsa kemiso ea beke le beke boiler ea CH e tla futhumatsa likamore ho fihlela mocheso o behiloeng esale pele athe ka ntle ho linako tsena boiler ea CH e futhumatsa likamore mocheso oa mocheso o behiloeng esale pele o fokotseha.
• Boemo ba leholimo - Ka mor'a ho khetha mosebetsi ona, mocheso oa boiler oa CH o behiloeng esale pele o itšetlehile ka boleng ba mocheso o ka ntle. Mosebelisi o beha litlhophiso tsa kemiso ea Beke le Beke.
  Litlhophiso - ts'ebetso ena (ntle le monyetla oa ho beha phokotso ea mocheso le thermostat ea kamore - joalo ka maemong a mocheso o sa feleng) e boetse e sebeletsa ho hlalosa sekhahla sa Heating le Tšusumetso ea sensor ea kamore. Mosebelisi a ka beha liparamente tse latelang:
• Mokokotlo o futhumatsang - e sebeletsa ho hlalosa mocheso oa boiler oa CH o behiloeng esale pele ho latela mocheso o ka ntle. Ho molaoli oa rona mothinya o na le lintlha tse 'ne tsa mocheso o kantle: 10°C, 0°C, -10°C le -20°C.
  Hang ha sekhahla sa ho futhumatsa se hlalositsoe, molaoli o bala boleng ba mocheso o ka ntle mme o fetola mocheso oa boiler o behiloeng esale pele ho latela.
• Tšusumetso ea sensor ea kamore - ho kenya tshebetsong tshebetso ena ho fella ka ho futhumala ho matla ho fihlella boleng bo seng bo setilwe haeba ho na le phapang e kgolo ya mocheso (mohlala, ha re batla ho fihlella mocheso o setetsweng pele wa phaposi kapele ka mora ho fokisa phaposi moya). Ka ho beha hysteresis ea ts'ebetso ena, mosebelisi a ka etsa qeto ea hore na tšusumetso e lokela ho ba efe.
• Phapang ea mocheso oa kamore - setlhophiso sena se sebelisetsoa ho hlalosa phetoho e le 'ngoe ea yuniti mochesong oa hona joale oa kamore eo ho eona ho tla hlahisoa phetoho e hlalositsoeng pele ho mocheso o behiloeng esale pele oa boiler ea CH.
  ExampLe:
  Phapang ea mocheso oa kamore 0,5°C
  Phetoho ea mocheso oa boiler oa CH o seng o behiloe 1°C
  Seta pele mocheso oa boiler oa CH 50°C
  Mocheso o behiloeng esale pele oa taolo ea kamore 23 ° C
  Taba ea 1. Haeba mocheso oa kamore o nyolohela ho 23,5 ° C (ka 0,5 ° C), mocheso oa boiler oa CH o behiloeng esale pele o fetoha ho 49 ° C (ka 1 ° C).
  Taba ea 2. Haeba mocheso oa kamore o theohela ho 22 ° C (ka 1 ° C), mocheso oa boiler oa CH o behiloeng esale pele o fetoha 52 ° C (ka 2 ° C).
• Phetoho ea mocheso o behiloeng esale pele - ts'ebetso ena e sebelisetsoa ho hlalosa hore na mocheso oa boiler oa CH o behiloeng esale pele ke likhato tse kae ho eketsa kapa ho fokotseha ka phetoho e le 'ngoe ea mocheso oa kamore (bona: Phapang ea mocheso oa kamore). Ts'ebetso ena e fumaneha feela ka TECH room regulator mme e amana haufi-ufi le .

TLHOKOMELISO EA KAMELO MOCHESO
Parameter ena e sebelisetsoa ho hlalosa mocheso oa kamore o behiloeng esale pele (mocheso oa matšeliso a motšehare). Paramethara ena e sebelisoa mohlala, lenaneong la nakoana - e sebetsa bakeng sa nako e boletsoeng lenaneong lena.

Fokotseha MOTHEO OA KA KAmore EO E TLANG
Paramethara ena e sebelisetsoa ho hlalosa mocheso o fokotsehileng oa kamore (mocheso oa moruo oa bosiu). Paramethara ena e sebelisoa mohlala ka mokhoa oa ho fokotsa.

PHEPO MOCHESO MOCHESO
Parameter ena e sebelisetsoa ho hlalosa bonyane mocheso oa boiler oa CH o behiloeng esale pele - mocheso o behiloeng esale pele o ka 'na oa se ke oa fokotseha ho feta boleng bo hlalositsoeng parameter ena. Maemong a mang mocheso oa boiler oa CH o behiloeng esale pele o ka laoloa ka algorithm ea ts'ebetso (mohlala, taolong e thehiloeng ho boemo ba leholimo haeba mocheso oa kantle o eketsehile) empa ha ho mohla o tla fokotsoa ka tlase ho boleng bona.

KEKETSO PHEPO MOCHESO
Parameter ena e sebelisetsoa ho hlalosa boholo ba mocheso oa boiler oa CH - mocheso o behiloeng esale pele o ka 'na oa se ke oa ba o phahameng ho feta boleng bo hlalositsoeng parameter ena. Maemong a mang mocheso oa boiler oa CH o behiloeng esale pele o ka laoloa ka algorithm ea ts'ebetso empa o ke ke oa feta boleng bona.

METSI A TŠEPANG

DHW MOCHESO 

Parameter ena e sebelisetsoa ho hlalosa mocheso oa metsi a chesang esale pele. Paramethara ena e sebelisoa mohlala, lenaneong la nakoana - e sebetsa bakeng sa nako e boletsoeng lenaneong lena.

RETS'ELISITSOE DHW TEMPERATURE 

Paramethara ena e sebelisetsoa ho hlalosa mocheso o fokotsehileng oa metsi a chesang esale pele. Paramethara ena e sebelisoa mohlala ka mokhoa oa ho fokotsa.

DHW TLOA LIHLOOHO TSA KA NTLE 

Haeba khetho ena e khethiloe, metsi a chesang a malapeng a ke ke a futhumatsoa ka ntle ho linako tse boletsoeng litlhophisong tsa taolo ea beke le beke.

LIEKETSENG

TŠEBELETSO TŠEBETSO TŠEBETSO
Hang ha ts'ebetso ena e se e kentsoe, mosebelisi o hlalosa mocheso o behiloeng esale pele. Haeba mocheso o ka ntle o theoha ka tlase ho boleng bona, molaoli o etsa hore pompo e sebetse ho fihlela mocheso o phahama le ho bolokoa metsotso e 6.
Ha ts'ebetso ena e sebetsa, molaoli o boetse o shebella mocheso oa boiler oa CH. Haeba e theoha ka tlase ho 10⁰C, ts'ebetso ea ho chesa mollo e qala 'me lelakabe le ts'oaroa ho fihlela mocheso oa boiler oa CH o feta 15⁰C.

LEHLABULA
Ha ts'ebetso ena e sebetsa, molaoli o tsoela pele ho shebella mocheso o ka ntle. Haeba mocheso oa monyako o feta, potoloho ea mocheso e tima.

MOFUTA MOKHOA
Molaoli o na le sensor e hahelletsoeng empa hape hoa khoneha ho sebelisa sensor e eketsehileng e se nang mohala. Sensor e joalo e tlameha ho ngolisoa ho sebelisa e 'ngoe ea likhetho: kapa . E latelang, tobetsa konopo ea puisano ho sensor nakong ea metsotsoana e 30. Haeba mokhoa oa ho ngolisa o atlehile, molaoli o tla hlahisa molaetsa ho netefatsa. Haeba sensor e eketsehileng e ngolisitsoe, ponts'o e kholo e tla bonts'a tlhahisoleseling mabapi le lets'oao la WiFi le boemo ba betri.

HLOKOMELA
Haeba betri e bataletse kapa ho se na puisano pakeng tsa sensor le molaoli, molaoli o tla sebelisa sensor e hahiloeng.

TSIETSO TS'ELISO
Sensor calibration e lokela ho etsoa nakong ea ho kenya kapa ka mor'a nako e telele ea ho sebelisa molaoli ha mocheso oa kamore (sensor ea kamore) kapa mocheso o ka ntle (sensor ea ka ntle) e lekantsoeng ke sensor e fapane le mocheso oa sebele. Mokhahlelo oa taolo ke -10 ho +10 ⁰C ka ho nepahala ha 0,1°C.

TAOLI BEKE

Mosebelisi a ka etsa kemiso ea taolo ea beke le beke bakeng sa ho futhumatsa metsi a chesang ka tlung le ka matsatsi a itseng a beke le lihora. Hoa khonahala ho theha linako tse 3 bakeng sa beke e 'ngoe le e 'ngoe u sebelisa metsu ea UP le DOWN. Litlhophiso tsa letsatsi le itseng li ka kopitsoa ho tse latelang.

• Khetha letsatsi leo u lokelang ho le hlophisa.
• Khetha linako tsa ho futhumatsa tse tla sebetsa 'me u hlophise nako ea tsona.
• Ha nako e ntse e ea, molaoli o tla sebetsa ho latela litlhophiso tsa mocheso tse behiloeng esale pele. Ka ntle ho linako tsena ts'ebetso ea taolo e hlophisitsoe ke mosebelisi ho Heating circuit -> Mofuta oa taolo -> Taolo e thehiloeng ho boemo ba leholimo -> Phokotso ea mocheso - haeba e khethiloe, molaoli o tima potoloho e fanoeng athe haeba e khethiloe, molaoli o sebetsa ho latela maemo a fokotsehileng a mocheso.

PUO

Khetho ena e sebelisoa ho khetha puo ea software e ratoang ke mosebelisi.

SOFTWARE TŠEBELE

Tlanya aekhoneng ena ho view logo ea moetsi oa boiler ea CH, mofuta oa software.

HLOKOMELA
Ha o ikopanya le Lefapha la Ts'ebeletso la k'hamphani ea TECH hoa hlokahala ho fana ka nomoro ea mofuta oa software.

TŠEBELETSO MENU

Ts'ebetso ena e sebelisetsoa ho etsa litlhophiso tse tsoetseng pele. Lenaneo la litšebeletso le lokela ho fumanoa ke motho ea tšoanelehang 'me le sirelelitsoe ka khoutu ea linomoro tse 4.

MOKHOA OA HO HLOMELA MODULE

The websebaka sa marang-rang se fana ka lisebelisoa tse ngata tsa ho laola sistimi ea hau ea ho futhumatsa. E le hore u nke advan e feletsengtagea theknoloji, iketsetse akhaonto ea hau:

Hang ha u se u kene, e ea ho li-setting tab ebe u khetha "Register module". E latelang, kenya khoutu e hlahisoang ke molaoli (ho hlahisa khoutu, khetha Ngoliso ho menu ea EU-2801 WiFi). Mojule o ka fuoa lebitso (ka har'a li ngotsoe tlhaloso ea Mojule).

LEHAE TABA

Taba ea lapeng e bonts'a skrine sa mantlha se nang le lithaele tse bonts'ang boemo ba hajoale ba lisebelisoa tse itseng tsa sistimi ea ho futhumatsa. Tlanya holim'a tile ho lokisa liparamente tsa ts'ebetso:

MOTS'ELISI MENU

Ho menu ea Basebelisi hoa khoneha ho beha mekhoa ea ts'ebetso, beke ea boiler le metsi a chesang le litekanyo tse ling ho latela litlhoko tsa hau.

LIEKETSO TEBELLO

Taba ea litlhophiso e thusa mosebelisi ho ngolisa mojule o mocha le ho fetola aterese ea lengolo-tsoibila kapa senotlolo:

LIEKETSENG MOTS'OANE

Tlhaloso	Boleng
Boemo ba mocheso oa kamore	ho tloha ho 5°C ho isa ho 40°C
Phepelo voltage	230V +/- 10% / 50Hz
Tšebeliso ea matla	1,3W
Ho nepahala ha tekanyo ea mocheso oa kamore	+/- 0,5°C
Mocheso oa ho sebetsa	ho tloha ho 5°C ho isa ho 50°C
Freuency	868MHz
Phetiso	IEEE 802.11 b/g/n

LITLHAHELO

EU-2801 WiFi e laola mocheso oa mocheso oa kamore e bontša lialamo tsohle tse hlahang ho molaoli ea ka sehloohong. Haeba ho na le alamo, molaoli o kenya lets'oao la molumo ebe skrineng e bonts'a molaetsa o nang le ID ea phoso.

HLOKOMELA 
Maemong a mangata, e le hore u tlose alamo ho hlokahala hore u e tlose ho molaoli oa boiler oa CH.

Phatlalatso ea EU ea ho lumellana

Ka hona, re phatlalatsa tlas'a boikarabello ba rona feela hore EU-2801 WiFi e entsoeng ke TECH STEROWNIKI, ntlo-kholo ea Wieprz Biała Droga 31, 34-122 Wieprz, e lumellana le Directive 2014/53/EU ea paramente ea Europe le Lekhotla la 16 Mmesa 2014 mabapi le tumellano ea melao ea Linaha tseo e leng Litho tse amanang le ho fumaneha 'marakeng oa lisebelisoa tsa seea-le-moea, Directive 2009/125/EC ho theha moralo oa ho beha litlhoko tsa ecodesign bakeng sa lihlahisoa tse amanang le matla hammoho le taolo. ka MINISTRY OF ENTREPRENEURSHIP AND TECHNOLOGY ea la 24 Phuptjane 2019 e fetolang taolo e mabapi le litlhoko tsa bohlokoa mabapi le thibelo ea ts'ebeliso ea lintho tse ling tse kotsi lisebelisoa tsa motlakase le tsa elektroniki, ho kenya tšebetsong lipehelo tsa Directive (EU) 2017/2102 ea Paramente ea Europe le ea Lekhotla la 15 Pulungoana 2017 e fetolang Taelo ea 2011/65/EU mabapi le thibelo ea tšebeliso ea lintho tse ling tse kotsi ho lisebelisoa tsa motlakase le tsa elektroniki (OJ L 305, 21.11.2017, leq. 8).
Bakeng sa tlhahlobo ea tumellano, ho ile ha sebelisoa litekanyetso tse lumellanang:
PN-EN IEC 60730-2-9 :2019-06 bonono. 3.1a Tšireletseho ea tšebeliso
PN-EN IEC 62368-1: 2020-11 bonono. 3.1 a Tšireletseho ea tšebeliso
PN-EN 62479: 2011 bonono. 3.1 a Tšireletseho ea tšebeliso
ETSI EN 301 489-1 V2.2.3 (2019-11) art.3.1b Electromagnetic comppatibility
ETSI EN 301 489-3 V2.1.1 (2019-03) art.3.1 b Electromagnetic comppatibility
ETSI EN 301 489-17 V3.2.4 (2020-09) art.3.1b Electromagnetic comppatibility
ETSI EN 300 328 V2.2.2 (2019-07) art.3.2 Tšebeliso e sebetsang hantle le e momahaneng ea seea-le-moea
ETSI EN 300 220-2 V3.2.1 (2018-06) art.3.2 Tšebeliso e sebetsang hantle le e momahaneng ea seea-le-moea
ETSI EN 300 220-1 V3.1.1 (2017-02) art.3.2 Tšebeliso e sebetsang hantle le e momahaneng ea seea-le-moea

Ntlo-kholo e bohareng:
ul. Biata Droga 31, 34-122 Wieprz

Tšebeletso:
ul. Skotnica 120, 32-652 Bulowice
mohala: +48 33 875 93 80
lengolo-tsoibila: serwis@techsterrowniki.pl
www.tech-controllers.com