Lethathamo la lintlha tsa SLG25664A

“

Litlhaloso

Tlhaloso ea Pontšo:

• Sebopeho sa Pontšo: 256 x 64
• Sehokelo sa Pontšo: 20P/2.54 Pin Header
• Mocheso oa ho sebetsa: -20°C ho ea ho +70°C
• Mocheso oa polokelo: -30°C ho ea ho +80°C

Tlhaloso ea Mokhoa:

• Bophahamo ba Outline: 137 x 39.60 MM
• Sebaka sa Pono: 108.60 x 29.60 MM
• Sebaka se sebetsang: 102.37 x 25.57 MM
• Boholo ba Dot: Ha bo boleloe
• Dot Pitch: Ha e hlalosoe

Motlakase ga tlhaloso:

• IC Pakete: AIP31108
• Motsamaisi: KS0108
• Sebopeho: 8 Bit Parallel

Tlhaloso ea Optical:

• Mofuta oa LCD: Ha o hlalosoe
• Viewing Angle Range: Ha ea hlalosoa
• Mmala oa Backlight: Ha o hlalosoe
• Mosebetsi oa LCD: Ha o hlalosoe
• LCD Bias: Ha e hlalosoe

Litaelo tsa Tšebeliso ea Sehlahisoa

1. Kemiso:

Hokela sehokedi sa pontsho sa mojule wa graphic LCD ho
segokanyimmediamentsi sa sebolokigolo sesebediswa sa hao.

2. Phepelo ea Matla:

Netefatsa hore o fana ka phepelo ea motlakase e tsitsitseng ka har'a se boletsoeng
voltagsebaka sa marang-rang (5.0V).

3. Kenyo ea Boitsebiso:

Romella lintlha ho mojule oa LCD u sebelisa molaoli o fanoeng
segokanyimmediamentsi sa sebolokigolo (8 Bit Parallel).

4. Maemo a Ts'ebetso:

Qoba ho pepesa mojulu ho mocheso o feteletseng ka ntle ho
mocheso o itseng oa mocheso o sebetsang.

Lipotso tse atisang ho botsoa (FAQ)

Q: ke eng tshebetso mocheso mefuta e fapaneng ya SLG25664A
Setšoantšo sa LCD module?

A: Thecheso ea ho sebetsa e fapaneng ke -20°C ho ea +70°C.

P: Pontšo e sebelisa sehokelo sa mofuta ofe?

A: Sehokelo sa ponts'o ke hlooho ea lipini tse 20 tse nang le molumo oa
2.54 limilimithara.

P: Phallo ea motlakase e khothaletsoang ke efetage bakeng sa
mojule?

A: The kgothaletswa voltagke 5.0V.

"`

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Setšoantšo sa S3ALG25664A

Lethathamo la lintlha tsa SLG25664A
TŠEBELETSO EA MOSEBETSI LCD MODULE
Ka kopo, tobetsa setšoantšo se latelang ho reka sample

Shenzhen Surenoo Technology Co.,Ltd. www.surenoo.com
Skype: Surenoo365

Reference Controller Datasheet
Tataiso ea Khetho ea LCD ea Graphic

AIP31108

KS0108

www.surenoo.com

Leqephe: 01 ho 21

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Setšoantšo sa S3ALG25664A

LIEKETSENG
1. LITSEBISO TSA ODARA – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – ––––04
1.1 Nomoro ea Taelo – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 04 1.2 Setšoantšo – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 04
2. TLHALOSO – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 05
2.1 Tlhaloso ea Pontšo – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 05 2.2 Litlhaloso tsa Metjhini – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 05 2.3 Tlhaloso ea Motlakase – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 05 2.4 Tlhaloso e hlakileng – – – – – – – - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - --05
3. THAKO EA TŠEBELETSO – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –––––––– 06
4. MOKHATLO OA MOTLATSI – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 07
4.1 Pin Configuration – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 07 4.2 Absolute Maximum Ratings – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 08 4.3 Litšobotsi tsa Motlakase – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 08
5. MAEPO A TLHAHLOLO – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –––––––– 09
5.1 Boemo bo Amohelehang ba Boleng – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 09 5.2 Tlhaloso ya Lota – – – – – – – – – – – – – – – – – – – – – – – – – – – – – — – – – – – – – – – – – – – – – – – – – – – – – – – – – 09 5.3 Condition of Cosmetic Inspection – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 09 5.4 Mojule wa Ditlolo – – – – – – - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - – 10 5.5 Dikarolo tsa Setlolo sa Sekirini (Se sa Sweng) – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 12 5.6 Skrine Cosmetic Criteria (Tshebetso) – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 13
6. MEKELETSO EA HO SEBELISA – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – ---15
6.1 Mehato ea ho Itlhokomela – – – – – – –—— – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 15 6.2 Mehato ea Tlhokomelo ea Phepelo ea Motlakase- – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 15 6.3 Operating Precautions- – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 16 6.4 Mechane/Tlhokomelo ya Tikoloho – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 16 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - – – – – – – – 6.5 16 Ba bang— – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – — — – – – – – – – – – – – – – – – – – – – – – – – – – – – 6.6

www.surenoo.com

Leqephe: 02 ho 21

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Setšoantšo sa S3ALG25664A

7. HO SEBELISA LIMODULE tsa Graphic – – – – – – – – – – –——— – – – – – – – – – – – – – – – – – – – – – – – – – – —–––17
7.1 – – – – – – – – – – 17 7.2 Ho kenya Graphci Modules – – ——- – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 17 7.3 Tlhokomelo bakeng sa ho sebetsana le Dimojule tsa Graphic – – – – – – – – – – – – – – –——– – – – – – – – – – – – – – – – – – – – – – – – – – 17 7.4 Electro-Static Discharge Control- – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 18 7.5 Precaution for Soldering to Surenoo LCM – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 18 7.6 Precaution for Operation – – – - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - – – – – – – 18 7.7 Tiisetso e Lekanyeditsweng – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 19 7.8 Return Policy – ​​– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 19
 - - - - - - - - - - - - 8
8.1 Image Sticking ke Eng? - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - – – – – – – – – – 20 8.2 Ke’ng ​​se bakang ho khomarela setšoantšo? - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - – – – – – – 20 8.3 Mokhoa oa ho Qoba ho Khomarela Setšoantšo? - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - – – – – – 21 8.4 Mokhoa oa ho Lokisa Sets’oants’o se Khomarelang? - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - – – – – 21 8.5 Na Image Sticking E Ahilwe ke Surenoo RMA Warranty – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 21

www.surenoo.com

Leqephe: 03 ho 21

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Setšoantšo sa S3ALG25664A

1. HO HLOMELA TSEBISO

1.1 Nomoro ea Taelo

Mohlala No.

Pontšo

Boholo

Boholo ba Outline ViewSebaka

(MM)

(MM)

Sebaka (MM)

Interface Voltage Molaoli

MAREKA

Mmala oa sebetsa

256*64 4 .2 ” 137*00*39.60 108.60*29.60 102.37*25.57

KS0108 5.0V AIP31108
SBN6400

SURENOO

SLG25664A 20P/2.54 8 Bit Parallel

1.2 Setšoantšo

Setšoantšo

www.surenoo.com

Leqephe: 04 ho 21

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

2. TLHALOSO
2.1 Tlhaloso ea Pontšo
Ntho ea Pontšo ea Sebopeho sa Pontšo Sehokelo se sebetsang Mocheso oa polokelo ea Mocheso
2.2 Tlhaloso ea Mechini
Athem Outline Dimension Visual Area Area Active Area Dot Size Dot Pitch
2.3 Tlhaloso ea Motlakase
Ntho ea IC Package Controller Interface
2.4 Tlhaloso ea Optical
Ntho ea mofuta oa LCD Viewing Angle Range Backlight Color LCD Duty LCD Bias

Boleng bo Tloaelehileng 256 x 64 20P/2.54 Pin Header -20 ~ +70 -30 ~ +80
Theko e Tloaelehileng 137.00(W) x39.60(H)x 10.50(T) 108.60(W) x 29.60(H) 102.37(W) x 25.57(H) 0.37×0.37 0.40×0.40
Boleng bo Tloaelehileng COB KS0108 / AIP31108 6800 8 bit Parallel
Boleng bo Tloaelehileng Sheba 1.1 SLG25664A Series Lethathamo la 6:00 Sheba 1.1 SLG25664A Series Lethathamo la 1/64 1/9

Setšoantšo sa S3ALG25664A
Unit Pixels -
Unit mm mm mm mm mm mm
Yuniti --
Yuniti -
degree -

www.surenoo.com

Leqephe: 05 ho 21

Leqephe: 06 ho 21

Setšoantšo sa S3ALG25664A

Maqephe 'Ohle a Khatiso Ena a Amogetsoe

Tshaeno:

Letsatsi:

Tšen. 1.0

TLHALOSO EA MODIFY 1'ST MOSEBETSI

PHETHANG KA JIM

DATE Dec-03-2020

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
3. THAKO EA TŠOANTŠO

TLHALOSO: 1. DFSTN / NEGATIVE / TRANSMISSIVE 2. MOSEBETSI: 1/64.BIAS: 1/9. VOP=10.4V 3. VIEWINGLE ENG: 6 O'CLOCK 4. MOCHESO OA TSEBETSI: -20~70'C
MEMPECHA EA EBOLO: -30~80'C 5. KHANTŠE KA MORAO: TŠEEU I=90MA
6. MATLA A KHANYA: VDD=5.0V 7. DRIVE IC: AIP31107 / KS0107

1.Unit: mm 2.OD=Outline Dimension 3.VA=Sebaka sa Pono 4.AA=Active Area
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

TUMELO
APP CHK DWN JIM

WEB: www.surenoo.com

Lengolo-tsoibila: info@surenoo.com

LETSATSI

Nomoro ea MOHLALA :

Lethathamo la lintlha tsa SLG25664A

KAKARETSO TOLE.
LEKOLO: NTS

Dec-03-20 U SE KE UA LEKOLA Setšoantšo sena.

LENIKATSO LA TŠEBELETSO:

1

LIEKETSENG MM

www.surenoo.com

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Setšoantšo sa S3ALG25664A

4. MOTLOTLO OA MOTLATSI

4.1 Pin Configuration

Phini No. 1 2 3 4 5 6 7
8-15

Letšoao la VSS VDD V0 VOUT RS R/WE
DB0-DB7

I/O 0V 5.0V Kenyeho ya Kenyo e Kentsweng H/L

16

CSA

Kenyeletso

17

CSB

Kenyeletso

18

CSC

Kenyeletso

19

RST

Kenyeletso

20

LEDA

5.0V

Tlhaloso

Fatše

Phepelo ea Matla a Logic

Tshebetso Voltage bakeng sa LCD

Tlhahiso ea Power Booster bakeng sa V0

H: Lintlha; L: Khoutu ea Taelo

H: Bala; L: Ngola

Numella Letšoao

Data Bus Line

Khetho ea Chip

CSC

CSB

Mosebetsi oa CSA

0

0

0

Etsa hore ho fihleloe Karolo (64 kholomo) ea Mojule oa LCD: Left-Hangata

0

0

1

Numella phihlello ea Karolo (64 kholomo) ea Mojule oa LCD: MiddleLeft

0

1

0

Etsa hore ho fihleloe Karolo (64 kholomo) ea LCD Module: MiddleRight

0

1

1

Numella phihlello ea Karolo (64 kholomo) ea Mojule oa LCD: RightMost

1

X

X Thibela phihlello eohle ea Mojule oa LCD

Etsa hore ho fihlelle Karolo ka 'ngoe ea Mojule oa LCD

Seta Lets'oao bocha, ha e sebetse hanyenyane

Backlight Anode

www.surenoo.com

Leqephe: 07 ho 21

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Setšoantšo sa S3ALG25664A

4.2 Likhakanyo tse Felletseng ka ho Fetisisa

Phepelo ea Matla bakeng sa Phepelo ea Matla a Logic bakeng sa LCD Input Voltage Supply Current bakeng sa Backlight
4.3 Litšobotsi tsa Motlakase
Ntho

Letšoao la VDD-VSS VEE VIN ILED
Letšoao

Phepelo ea Matla bakeng sa LCM

VDD-VSS

Keletso Voltage
Khumo Voltage Supply Current for LCM Supply Current for Backlight

VIL VIH VOL VOH IDD ILED

Min. -0.3 VDD-19 -0.3 –

Tlanya. 75

Boemo
Phepelo ea kantle
Boemo ba L Boemo ba L Boemo ba H Boemo -

Min. 4.7 3.0 0 2.0 0 2.4 —

Max. +7.0 VDD+03 VDD+0.3 –

Sehlopha sa VVV mA

Tlanya. 5.0 3.3
-3.5 50

Max. 5.3 3.6 0.8 VDD 0.4 VDD 4 120

Yuniti ea VVVVVV mA mA

www.surenoo.com

Leqephe: 08 ho 21

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Setšoantšo sa S3ALG25664A

5. TLHOKOMELISO EA HLAHLOBO
5.1 Boemo bo Amohelehang ba Boleng

Lotho ka 'ngoe e lokela ho khotsofatsa boemo ba boleng bo hlalositsoeng ka tsela e latelang

Karohano

AQL

Tlhaloso

A. Major

0.4%

E sa sebetse hantle joalo ka sehlahisoa

B. Nyenyane

1.5%

Khotsofatsa mesebetsi eohle e le sehlahisoa empa u sa khotsofatse maemo a litlolo

5.2 Tlhaloso ea Lota
Lotho e le 'ngoe e bolela palo ea thomello ho moreki ka nako e le' ngoe.
5.3 Boemo ba Tlhahlobo ea Litlolo
HLAHLOBO LE TEKO -TEKO YA MOSEBETSI - HLAHLOBO YA PONAHALO -KGETHO YA HO PAKA
TLHAHLOBO CONDITION - Beha tlas'a lamp (20W) hole 100mm ho tloha - Sekama o otlolohile 45 degree ka pele (morao) ho hlahloba ponahalo ea Panel.
LEHATO LA TLHAHLOBO YA AQL – SAMPMOKHOA OA LING: MIL-STD-105D – SAMPLING PLAN: LESOTHO - TLHOKOMELISO E KHOLO: 0.4% (E KGOLO) - TLHOKOMELO TSE NNYANE: 1.5% (NYANE) - LEKOLO LE KAKARETSO: II/ TLOAELEHANG

www.surenoo.com

Leqephe: 09 ho 21

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Setšoantšo sa S3ALG25664A

5.4 Module Cosmetic Criteria

Che.

Ntho

Kritere ea Kahlolo

1 Phapang ho Spec.

Ha ho le e 'ngoe e lumelletsoeng

2 Peeling ea mohlala

Ha ho na mohlala oa substrate o ebolang le o phaphametseng

3 Mefokolo ea Soldering

Ha ho solder e sieo

Ha ho borokho ba solder

Ha ho solder e batang

4 Hanela Phoso ho Substrate E sa bonahaleng foil ea koporo (0.5mm kapa ho feta) ho paterone ea substrate

5 Acretion of Metallic

Ha ho lerōle la solder

Taba ea Kantle ho Naha

Ha ho na accretion ea litaba tsa kantle tsa tšepe (Ha li fete 0.2mm)

6 Letheba

Ha ho letheba ho senya litlolo hampe

7 Poleiti e Senyang mmala

Ha ho poleiti e felang, e mafome le ho fifala

Chelete ea Solder

Likarolo tsa 1.Lead

Karohano e kholo Major Major Major Nyenyane Nyane
Nyenyane e nyane e nyane

8 2.Flat Packages 3.Chips

a. Lehlakore la soldering la PCB Solder ho theha 'Fileka nqa tsohle. Solder ha ea lokela ho pata foromo ea lead ka mokhoa o phethahetseng.(haholo)
b.Lehlakore la likarolo (Ha e le `Ka Hole Hole PCB') Solder ho fihla lehlakoreng la likarolo tsa PCB.

E 'ngoe` monoana'(A) kapa `folisa' (B) ea loto e lokelang ho koaheloa ke Filet'.
Foromo e etellang pele e lokela ho nkoa ka holim'a solder.
(3/2) Hh(1/2)H

A

B

h

H

Nyenyane e nyane

www.surenoo.com

Leqephe: 10 ho 21

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Setšoantšo sa S3ALG25664A

9 Backlight Mefokolo 10 PCB Mefokolo 11 Soldering Mefokolo

1.Leseli lea fokola kapa lea panya.(Maholo) 2. Mmala le khanya ha li tsamaellane le litlhaloso.
(E kholo) 3.E feta litekanyetso tsa likoli tsa ponts'o, taba ea kantle ho naha,
mela e lefifi kapa mengoapo.(Minor)
Oxidation kapa tšilafalo lihokelong.* 2. Likarolo tse fosahetseng, likarolo tse sieo, kapa likarolo tse seng ka mokhoa o ikhethileng.* 3.Lijumper li setiloe hampe.(Minor) 4.Solder(haeba e teng) on ​​bezel, LED pad, zebra pad, kapa screw hole.
pad ha e boreleli.(Minor) *Nnyane haeba ponts'o e sebetsa ka nepo. E kholo haeba pontšo e hloleha.
1. Peista ea solder e sa qhibilihang. 2. Li-solder tse batang, tse sieo tsa solder, kapa oxidation.* 3. Marokho a solder a bakang lipotoloho tse khuts'oane. 4. Solder flux e ntšo kapa e sootho. * E nyane haeba e sebetsa ka nepo. E kholo haeba pontšo e hloleha.

Sheba lenane
Sheba lenane
Nyenyane

www.surenoo.com

Leqephe: 11 ho 21

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Setšoantšo sa S3ALG25664A

5.5 Litekanyetso tsa Setlolo sa Skrine (Se sa sebetseng)

Che. Sekoli

Kritere ea Kahlolo

1 Matheba

Ho ea ka Melao-motheo ea Screen Cosmetic (Operating) No.1.

2 Mela

Ho ea ka Melao ea Litlolo ea Screen (Ts'ebetso) No.2.

Li-bubble tse 3 ka Polarizer

Boholo: d mm

Qty e amohelehang sebakeng se sebetsang

d0.3

Hlokomoloha

0.3

3

1.0

1

1.5 <d

0

Karohano e Nyenyane e Nyane

4 Mongoapo
5 Bongata bo lumelletsoeng 6 Mebala
7 Tšilafalo

Ho ea ka matheba le mela e sebetsang ea mekhoa ea litlolo, Ha leseli le bonahatsa holim'a marang-rang, li-scratches ha lia lokela ho hlolla. Ka holimo liphoso li lokela ho aroloa ho feta 30mm mong ho e mong. Eseng ho hlokomeleha coloration in the viewsebaka sa liphanele tsa Graphic. Mofuta o khantšitsoeng ka morao o lokela ho ahloloa ka mabone a morao-rao feela. Eseng ho hlokomeleha.

Nyenyane
Nyenyane e nyane
Nyenyane

www.surenoo.com

Leqephe: 12 ho 21

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Setšoantšo sa S3ALG25664A

5.6 Litekanyetso tsa Setlolo sa Screen (Ts'ebetso)

Che.

Sekoli

1 Matheba

2 Mela

A) Hlakileng

Kritere ea Kahlolo

Boholo:d mm d0.1
0.1
0.3 <d

Qty e Amohelehang sebakeng se sebetsang Ho se tsotelle 6 2 0

Tlhokomeliso: Ho kenyeletsoa masoba a phini le matheba a sa sebetseng a tlamehang ho ba ka har'a boholo ba pixel e le 'ngoe. E sa hlakang

Boholo:d mm d0.2
0.2
0.7 <d

Qty e Amohelehang sebakeng se sebetsang Ho se tsotelle 6 2 0

A) Hlakileng

Karohano e Nyane
Nyenyane

W 5.0 2.0

8

(0) (6)

0.02 0.05

0.1

Tlhokomeliso: () Kty e amohelehang sebakeng se sebetsang L – Bolelele (mm) W -Bophara(mm) -Ho hlokomoloha
B) Ha ho hlakile

8

L 10.0 (6)
2.0 0.05

(0) 0.3

Sheba No.1 W
Sheba No.1 W
0.5

Hlakola' = Moriti le boholo ha li fetoloe ke Vo. Ha ho hlakile'= Moriti le boholo li fetoloa ke Vo.

www.surenoo.com

Leqephe: 13 ho 21

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Setšoantšo sa S3ALG25664A

Che.

Sekoli

Kritere ea Kahlolo

3 Mohala oa ho thella

Eseng ho hlokomeleha.

4 Tekanyo e dumelletsweng Ka hodimo ho mefokolo e lokela ho arolwa ho feta 10mm ho tse ding.

5 Mookoli

Eseng ho hlokomeleha.

6 Boholo ba matheba

Ho ba 95% ~ 105% ea boholo ba matheba (Mofuta.) ho taka. Bofokoli bo itseng ba letheba ka leng (ex.pin-hole) bo lokela ho ts'oaroa joalo ka letheba. (sheba Screen Cosmetic Criteria (Operating) No.1)

7 Khanya (mojule oa ho khantša morao feela)

Brightness Uniformity e tlameha ho ba BMAX/BMIN2 – BMAX : Max.value by measure in 5 points – BMIN : Min.value by measure in 5 points Arola sebaka se sebetsang ho tse 4 tse otlolohileng le tse tshekaletseng. Lekanya lintlha tse 5 tse bontšitsoeng setšoantšong se latelang.

Karohano e Nyane e Nyane e Nyane
Nyenyane

8 Bapisa ho Tšoanang ho Tšoanang

Phapang Uniformity e tlameha ho ba BmAX/BMIN2 Methang lintlha tse 5 tse bontšitsoeng setšoantšong se latelang. Methalo e tsoetsoeng e arola sebaka se sebetsang ho tse 4 ho ea holimo le ho ea holimo. Lintlha tsa ho lekanya li fumaneha likarolong tse fapaneng tsa mola o nang le lebelo.

Nyenyane

Tlhokomeliso: BMAX Max.value ka tekanyo ho lintlha tse 5. BMIN Min.boleng ka tekanyo ho lintlha tse 5. O Lintlha tsa ho lekanya ka 10mm.
Ela hloko: (1) Boholo: d=(bolelele bo bolelele + bolelele bo bokgutshwane)/2 (2) Moeli sampntho e 'ngoe le e 'ngoe e na le lintho tse tlang pele. (3) Litšitiso tse rarahaneng li hlalosoa ntho ka ntlha, empa haeba palo ea liphoso e hlalositsoe tafoleng e ka holimo, palo eohle ha ea lokela ho feta 10.

www.surenoo.com

Leqephe: 14 ho 21

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Setšoantšo sa S3ALG25664A

6.3 Litlhokomelo tsa Ts'ebetso
U SE KE UA plug kapa ho ntša mojule oa Surenoo ha sistimi e ts'oaroa.
345B29
Fokotsa bolelele ba thapo lipakeng tsa module ea Surenoo le MPU e amohelang. Bakeng sa mehlala e nang le mabone a ka morao, u se ke ua tima lebone la morao ka ho sitisa mohala oa HV. Li-inverters tse theolelang li hlahisa voltage
maemo a feteletseng a ka hare ho thapo kapa pontshong. Sebetsa Surenoo module ka har'a meeli ea litekanyetso tsa mocheso oa modules.
6.4 Litlhokomelo tsa Mechini/Tikoloho
Solder e sa nepahalang ke sesosa se seholo sa bothata ba module. Tšebeliso ea flux cleaner ha e khothalletsoe kaha e ka 'na ea sebela ka tlase
350B47
khokahanyo ea electrometric mme e baka ho hloleha ha ponts'o. Mount Surenoo module e le hore e se ke ea e-ba le torque le khatello ea mochine. Bokaholimo ba karolo ea Graphic ha ea lokela ho angoa kapa ho ngolisoa. Sebaka se ka pele se bonts'ang ke polasetiki e ngoloang habonolo
polarizer. Qoba ho kopana le ho hloekisa hafeela ho hlokahala ka k'hothone e bonolo, e monyang dampe entsoeng ka petroleum benzene. Kamehla sebelisa mokhoa oa anti-static ha u ntse u sebetsana le module ea Surenoo. Thibela ho bokellana ha mongobo holim'a mojule 'me u hlokomele lithibelo tsa tikoloho bakeng sa polokelo tem U se ke ua boloka letsatsing le tobileng Haeba ho tsoa ha thepa ea kristale ea metsi ho lokela ho hlaha, qoba ho kopana le thepa ena, haholo-holo ho e kenngoa. Haeba 'mele kapa
liaparo li silafatsoa ke lisebelisoa tsa kristale tsa metsi, li hlatsoe hantle ka metsi le sesepa.
6.5 Litlhokomelo tsa polokelo
Ha u boloka li-module tsa Graphic, qoba ho pepesehela khanya ea letsatsi kapa khanya ea fluorescent l.amps. Boloka li-module tsa Surenoo ka mekotleng (qoba mocheso o phahameng / mongobo o phahameng le mocheso o tlase o ka tlase ho 0 ºC. Nako le nako ha ho khoneha, li-module tsa Surenoo Graphic li lokela ho bolokoa maemong a tšoanang le ao li rometsoeng ho tsona ho tloha k'hamphani ea rona.
6.6 Tse ling
Likristale tsa metsi li tiea tlas'a mocheso o tlase (ka tlase ho mocheso oa polokelo) o lebisang ho chekoa kapa
36B057
tlhahiso ea li-bubble tsa moea (tse ntšo kapa tse tšoeu). Li-bubble tsa moea le tsona li ka hlahisoa haeba mojule o le tlas'a mocheso o tlase. Haeba li-module tsa Surenoo Graphic li 'nile tsa sebetsa ka nako e telele li bontša mekhoa e tšoanang ea ponts'o, mekhoa ea ponts'o e ka' na ea sala skrineng e le litšoantšo tsa ghost 'me ho ka hlaha ho se nepahale ho fokolang ho fokolang. Boemo bo tloaelehileng ba ts'ebetso bo ka fumanoa hape ka ho emisa tšebeliso ka nako e itseng. Hoa lokela ho hlokomeloa hore ketsahalo ena ha e ame hampe ts'episo ea ts'ebetso. Ho fokotsa ts'ebetso ea ts'ebetso ea li-modules tsa Graphic tse bakoang ke timetso e bakoang ke motlakase o tsitsitseng joalo-joalo, itlhokomele ho qoba ho tšoara likarolo tse latelang ha u sebetsana le li-modules. - Sebaka se pepesitsoeng sa boto ea potoloho e hatisitsoeng.
- Likarolo tsa li-electrode tsa terminal.

www.surenoo.com

Leqephe: 15 ho 21

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Setšoantšo sa S3ALG25664A

(4) Tabeng ea `concentration', esita le matheba kapa mela ea boholo ba `ho hlokomolohuoa' ha ea lokela ho lumelloa. Ho latela maemo a mararo ho lokela ho nkuwa joalo ka `concentration'.
-7 kapa ho feta mefokolo ka selikalikoe sa 5mm. -10 kapa ho feta mefokolo ka selikalikoe sa 10mm -20 kapa mefokolo e fetang selikalikoe sa 20mm
6. LITEKO TSA HO SEBELISA
6.1 Ho Ts'oara Litlhokomeliso

Sesebelisoa sena se kotsing ea ho senyeha ha Electro-Static Discharge (ESD). Ela hloko litemoso tsa Anti-Static. Surenoo display panel e entsoe ka khalase. Se ke oa etsa hore e tsohe ka mokhoa o itseng ka ho e theola kapa ho e ama. Haeba Surenoo display panel e senyehile 'me ntho ea kristale ea metsi e lutla, etsa bonnete ba hore u se ke ua kenya leha e le efe molomong oa hau. Haeba e
ntho e ama letlalo kapa liaparo tsa hao, li hlatsoe ka sesepa le metsi. Se ke oa sebelisa matla a feteletseng holim'a pontšo ea Surenoo kapa libakeng tse hokahaneng kaha sena se ka etsa hore molumo oa 'mala o be teng.
fapana. Polarizer e koahelang sebaka sa ponts'o sa Surenoo sa mojule oa Graphic e bonolo ebile e ngoauoa habonolo. Tšoara polarizer ena
ka hloko. Haeba sebaka sa ponts'o sa Surenoo se silafala, phefumoloha holimo 'me u se hlakole ka lesela le bonolo le omeletseng. Haeba ho joalo
lesela le silafalitsoeng haholo, le kolobisitseng ka e 'ngoe ea tse latelang tsa Isopropyl kapa joala. Lisebelisoa tse ling ntle le tse boletsoeng ka holimo li ka senya polarizer. Haholo-holo, u se ke ua sebelisa Metsi. Itlhokomele ho fokotsa ho bola ha electrode. Ho bola ha li-electrode ho potlakisoa ke marotholi a metsi, mongobo
condensation kapa phallo ya ha jwale sebakeng se nang le mongobo o mongata. Kenya Surenoo Graphic Module ka ho sebelisa masoba a ntseng a hola. Ha o kenya mojule oa Graphic etsa bonnete ba hore ha o na
ho sotha, ho sotha le ho sotha. Haholo-holo, u se ke ua hula ka likhoka kapa ua koba thapo kapa thapo ea backlight. Se ke oa leka ho qhaqholla kapa ho sebetsa mojule oa Surenoo Graphic. NC terminal e tlameha ho buloa. Se hokela letho. Haeba motlakase oa potoloho ea logic o timme, u se ke ua sebelisa matšoao a ho kenya. Ho thibela ho senngoa ha likarolo ka motlakase o tsitsitseng, ela hloko ho boloka tikoloho e ntle ea mosebetsi.
-Etsa bonnete ba hore o theola 'mele ha o sebetsana le li-module tsa Surenoo Graphic. -Lisebelisoa tse hlokahalang bakeng sa ho kopanya, joalo ka litšepe tsa solder, li tlameha ho theoa hantle. -Ho fokotsa palo ea motlakase o tsitsitseng o hlahisoang, u se ke ua tsamaisa ho bokana le mosebetsi o mong tlas'a maemo a omileng. -Mojule oa Graphic o koahetsoe ka filimi ho sireletsa bokaholimo ba pontšo. E-ba hlokolosi ha u ebola filimi ena e sireletsang kaha motlakase o tsitsitseng o ka hlahisoa.

6.2 Litlhokomelo tsa Phepelo ea Matla

Khetholla, 'me ka linako tsohle, hlokomela litekanyetso tse felletseng bakeng sa bakhanni ba logic le ba LC. Hlokomela hore ho na le phapang e itseng
38B524619
pakeng tsa mehlala. Thibela ts'ebeliso ea reverse polarity ho VDD le VSS, leha ho le joalo ka bokhuts'oane. Sebelisa mohloli o hloekileng oa motlakase o se nang li-transients. Maemo a matla a motlakase aa sisinyeha ka linako tse ling 'me a ka feta boholo ba eona
litekanyetso tsa li-module tsa Surenoo. Matla a VDD a module ea Surenoo a boetse a lokela ho fana ka matla ho lisebelisoa tsohle tse ka kenang ponts'ong. Se lumelle
bese ea data e lokelang ho khannoa ha phepelo ea logic ho module e tingoa.

www.surenoo.com

Leqephe: 16 ho 21

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Setšoantšo sa S3ALG25664A

7. HO SEBELISA LI-MODULE tsa Graphic
7.1 Li-module tsa Pontšo ea Crystal ea Mokelikeli
Surenoo Display e entsoe ka khalase le polarizer. Ela hloko lintho tse latelang ha u tšoara. Ka kopo, boloka mocheso ka har'a sebaka se itseng seo u ka se sebelisang le ho se boloka. Polarization degradation, tlhahiso ea bubble kapa
Polarizer peel-off e ka hlaha ka mocheso o phahameng le mongobo o phahameng. Se ke oa ama, oa sututsa kapa oa hohla li-polarizer tse pepesitsoeng ka eng kapa eng e thata ho feta loto ea pentšele ea HB (khalase, li-tweezers, joalo-joalo). N-hexane e khothaletsoa ho hloekisa likhomaretsi tse sebelisetsoang ho hokela li-polarizer tse ka pele / tse ka morao le li-reflectors tse entsoeng ka manyolo.
lintho tse tla senngoa ke lik'hemik'hale tse kang acetone, toluene, ethanol le joala ba isopropyl. Ha sefahleho sa Surenoo se fetoha lerole, hlakola ka bonolo ka k'hothone e monyang kapa lintho tse ling tse bonolo joalo ka chamois
e kolobisitsoe ka benzine ea peterole. Se ke oa hohla ka thata ho qoba ho senya bokaholimo ba pontšo. Hlakola mathe kapa marotholi a metsi hang-hang, ho kopana le metsi ka nako e telele ho ka baka deformation kapa mmala
fading. Qoba ho kopana le oli le mafura. Ho koaheloa ka holim'a metsi le ho kopana le li-terminals ka lebaka la serame ho tla senya, ho silafatse kapa ho silafatsa li-polarizer. Ka mor'a lihlahisoa
li lekoa ka mocheso o tlase, li tlameha ho futhumatsoa ka har'a setshelo pele li fihla li kopana le moea oa mocheso oa kamore. Se ke oa beha kapa oa hokela letho sebakeng sa ponts'o sa Surenoo ho qoba ho siea matšoao a ntse a tsoela pele. Se ke oa tšoara pontšo ka matsoho a sa roala letho. Sena se tla silafatsa sebaka sa ponts'o 'me se fokolise ho kenella lipakeng tsa li-terminals (litlolo tse ling li etselitsoe li-polarizers). Joalo ka ha khalase e robeha. E atisa ho fetoha kapa ho qhekelloa nakong ea ho sebetsana haholo-holo ka mathōko. Ka kopo qoba ho oela.
7.2 Ho kenya Graphic Modules
Koahela bokaholimo ka poleiti e sireletsang e bonaletsang ho sireletsa polarizer le LC cell.
384B17259
Ha o kopanya LCM ho lisebelisoa tse ling, spacer ho ea hanyane pakeng tsa LCM le poleiti e loketseng e lokela ho ba le bophahamo bo lekaneng ho qoba ho baka khatello holim'a mojule, ho bua ka litlhaloso tsa motho ka mong bakeng sa litekanyo. Tekanyo ea mamello e lokela ho ba ± 0.1mm.
7.3 Tlhokomelo ea ho Ts'oara Graphic Modules
Kaha Surenoo LCM e 'nile ea bokelloa' me ea lokisoa ka tekanyo e phahameng ea ho nepahala; qoba ho sebelisa litšisinyeho tse feteletseng ho module kapa ho etsa liphetoho kapa lintlafatso ho eona. Se ke oa fetola, oa fetola kapa oa fetola sebopeho sa tab e foreiming ea tšepe. Se ke oa etsa masoba a eketsehileng holim'a boto ea potoloho e hatisitsoeng, fetola sebopeho sa eona kapa u fetole maemo a likarolo ho ba.
khomaretsoe. U se ke ua senya kapa ua fetola mokhoa oa ho ngola ka boto ea potoloho e hatisitsoeng. Ho hang u se ke ua fetola sekhahla sa rabara ea qoaha (rabara e tsamaisang) kapa sehokelo sa tiiso ea mocheso. Ntle le ho kopanya sebopeho, u se ke ua etsa liphetoho leha e le life kapa liphetoho ka tšepe ea soldering. Se ke oa liha, oa inama kapa oa sotha Surenoo LCM.

www.surenoo.com

Leqephe: 17 ho 21

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Setšoantšo sa S3ALG25664A

7.4 Taolo ea ho Hlatsoa ha Electro-Static
Kaha mojule ona o sebelisa CMOS LSI, tlhokomelo e ts'oanang e lokela ho lefshoa ho tsoa ha electrostatic joalo ka CMOS IC e tloaelehileng. Etsa bonnete ba hore ha u fane ka LCM ha u na matla. Pele o tlosa LCM mokotleng oa eona oa ho paka kapa o e kenyelletsa sete, etsa bonnete ba hore module le 'mele oa hau li tšoana.
matla a motlakase. Ha o kopanya terminal ea LCM, etsa bonnete ba hore mohloli oa matla a AC bakeng sa tšepe ea solder ha o lutle. Ha o sebelisa screwdriver ea motlakase ho hokela LCM, screwdriver e lokela ho ba ea matla a fatše ho fokotsa ho lekana.
Ho ka etsahala hore phetiso efe kapa efe ea maqhubu a motlakase e hlahisa litlhase tse tsoang ho se tsamaisang enjene. Ka hohle kamoo ho ka khonehang etsa hore matla a motlakase a liaparo tsa hau tsa mosebetsi le tsa benche ea mosebetsi e be monyetla oa fatše. Ho fokotsa tlhahiso ea motlakase o tsitsitseng e-ba hlokolosi hore moea o mosebetsing ha o omisitsoe haholo. Mongobo o lekanyelitsoeng oa 50-60%
e khothaletsoa.
7.5 Tlhokomelo bakeng sa ho rekisoa ho Surenoo LCM
Ela hloko lintlha tse latelang ha u etsa terata ea loto, thapo ea sehokelo le tse ling ho LCM. -Soldering tšepe mocheso : 280±10 -Soldering nako: 3-4 sec. -Solder: eutectic solder.
Haeba soldering flux e sebelisoa, etsa bonnete ba hore o tlosa phallo efe kapa efe e setseng ka mor'a ho qeta ho sebetsa ka solder. (Sena ha se sebetse tabeng ea mofuta o seng oa halogen oa phallo.) Ho kgothaletswa hore o sireletse bokaholimo ba Panel ka sekoahelo nakong ea solder ho thibela tšenyo leha e le efe ka lebaka la li-spatters tsa flux. Ha soldering phanele electroluminescent le PC boto, phanele le boto lokela ho detached ho feta tse tharo
linako. Nomoro ena e phahameng e khethoa ke mocheso le maemo a nako a boletsoeng ka holimo, le hoja ho ka 'na ha e-ba le phapang e itseng ho itšetlehile ka mocheso oa tšepe ea soldering. Ha u tlosa phanele ea electroluminescent ho boto ea PC, etsa bonnete ba hore solder e qhibilihile ka ho feletseng, pad e rekisoang ka boto ea PC e ka senyeha.
7.6 Tlhokomelo bakeng sa Ts'ebetso
Ho khanna Graphic ea Surenoo ka voltage ka holimo ho moeli e khutsufatsa bophelo ba eona.
413B07
Nako ea ho arabela e lieha haholo ka mocheso o ka tlase ho mocheso o sebetsang. Leha ho le joalo, sena ha se bolele hore Panel e tla tsoa taolong. E tla hlaphoheloa ha e khutlela mocheng o boletsoeng oa mocheso.
Haeba sebaka sa pontšo ea Surenoo se sutumetsoa ka thata nakong ea ts'ebetso, ponts'o e tla fetoha e sa tloaelehang. Leha ho le joalo, e tla khutlela ho se tloaelehileng haeba e tingoa ebe e khutlela ho eona.
Condensation ho li-terminals e ka baka karabelo ea electrochemical e sitisang potoloho ea terminal. Ka hona, e tlameha ho sebelisoa tlas'a maemo a lekanyelitsoeng a 40, 50% RH.
Ha o bulela matla, kenya lets'oao le leng le le leng ka mor'a molumo o motle/negativetage fetoha e tsitsitseng.

www.surenoo.com

Leqephe: 18 ho 21

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Setšoantšo sa S3ALG25664A

7.7 Tiisetso e fokolang
Ntle le haeba ho lumellanoe pakeng tsa Surenoo le moreki, Surenoo e tla nkela sebaka kapa ho lokisa li-module tsa eona tsa Graphic tse fumanehang ho.
49B163
e be e sa sebetseng hantle ha e hlahlojoa ho latela litekanyetso tsa kamohelo ea Surenoo Graphic (likopi li fumaneha ha li kopa) nako ea selemo ho tloha ka letsatsi la thomello. Litšitiso tsa litlolo / pono li tlameha ho khutlisetsoa Surenoo nakong ea matsatsi a 90 ka mor'a ho romelloa. Netefatso ea letsatsi le joalo e tla itšetleha ka litokomane tsa thepa. Tiisetso ya mekoloto ya Surenoo e lekanyeditswe ho lokisoa le/kapa phetoho ho latela dipehelo tse boletsweng ka hodimo. Surenoo e ke ke ea ikarabella bakeng sa liketsahalo tse latelang kapa tse tla latela.
7.8 Leano la ho khutlisa
Ha ho na waranti e ka fanoang haeba mehato e boletsoeng ka holimo e hlokomolohuoe. E tloaelehileng examplisosa tsa litlolo ke tsena:
2B4196
-Khalase ea Graphic e robehileng. - Leihlo la PCB le senyehile kapa le fetotsoe. - Li-conductors tsa PCB li senyehile. -Circuit e fetotsoe ka tsela efe kapa efe, ho kenyelletsa le tlatsetso ea likarolo. -PCB tampe entsoe ka ho sila, ho betla kapa ho penta varnish. -Soldering ho kapa ho fetola bezel ka tsela efe kapa efe. Litokiso tsa mojule li tla ngolisoa ho moreki ka tumellano ea bobeli. Li-module li tlameha ho khutlisoa li na le tlhaloso e lekaneng ea ho hloleha kapa mefokolo. Lihokelo kapa thapo efe kapa efe e kentsoeng ke moreki e tlameha ho ntšoa ka botlalo ntle le ho senya leihlo la PCB, likhondara le litheminale.

www.surenoo.com

Leqephe: 19 ho 21

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Setšoantšo sa S3ALG25664A

8. HO KHOMANA LITŠOANTŠO
8.1 Image Sticking ke Eng?
Haeba u lula u le setšoantšo se tsitsitseng ho Graphic Display nako e telele, u ka ba le ketsahalo e bitsoang Image Sticking. Image Sticking - ka linako tse ling e boetse e bitsoa "ho boloka setšoantšo" kapa "ghosting"- ke ketsahalo eo ho eona setšoantšo se fokolang sa setšoantšo se bontšitsoeng se lulang se bonahala skrineng ha setšoantšo se fetoloa. E ka etsahala ka maemo a fapaneng a matla ho latela sebopeho se ikhethileng sa setšoantšo, hammoho le nako eo likarolo tsa mantlha tsa setšoantšo li lumelletsoeng ho lula li sa fetohe skrineng. Likopong tsa POS, mohlalaample, lenane la likonopo le lulang le tsitsitse, kapa moo likarolo tsa "frame" (setšoantšo sa mantlha) li lulang li tsitsitse 'me likonopo li ka fetoha, li ka ba bonolo ho khomarela setšoantšo. Ho bohlokoa ho ela hloko hore haeba skrini se sebelisoa feela bakeng sa sesebelisoa sena, mosebelisi a kanna a se ke a hlokomela ketsahalo ena kaha skrini ha se hlahise litaba tse ling. `Ke feela ha setšoantšo se seng sa "setšoantšo" se bontšoa skrineng moo taba ena e totobalang. Ho khomarela setšoantšo ho fapane le phello ea "cheso-in" e atisang ho amahanngoa le lisebelisoa tse thehiloeng ho phosphor.
8.2 Ke'ng e bakang ho khomarela setšoantšo?
Ho khomarela setšoantšo ke boits'oaro bo ka hare ba litšoantšo tsa Graphic ka lebaka la ts'oaetso ea polarization ea thepa ea ka hare (likristale tsa mokelikeli) ha li sebelisoa tlas'a maemo a tsitsitseng, a qosoa (a tsoela pele ho bontša setšoantšo se tšoanang). Likristale tsa mokelikeli ka bomong ka phanele ea Graphic li na le thepa e ikhethang ea motlakase. Ho hlahisa mokhoa o tsitsitseng - joalo ka lenane la POS le hlalositsoeng ka holimo ka nako e telele ho ka etsa hore ho be le tefiso ea likokoana-hloko (polarization) ka har'a likristale tsa metsi tse amang lisebelisoa tsa kristale 'me qetellong li thibele kristale ea metsi ho khutlela ho tloaelehileng, e phutholohileng. bolela hore na mohlala o qetella o fetotsoe neng. Phello ena e etsahala boemong ba lisele tsa cellular ka hare ho Panel, 'me phello e ka baka ho lumellana ha kristale ka tlaase kapa ka holim'a sele ea kristale ka "z" axis, kapa esita le ho falla ha kristale ho ea lipheletsong tsa sele, hape ho itšetlehile ka polarity ea bona. Maemo ana a ka etsa hore setšoantšo se khomarele sebaka sohle, kapa meeling ea ho fetoha ha mebala e fapaneng ka ho latellana. Leha ho le joalo, ha likristale tsa mokelikeli ka har'a lipikselse le li-sub-pixel tse sebelisoang ho bonts'a setšoantšo se sa fetoheng li qhekelloa hoo li ke keng tsa khona ho khutlela ka botlalo maemong a tsona a "khatholohileng" ha li tima, sephetho ke setšoantšo se lerootho, se bonahalang, se bolokiloeng. phanele ha ho hlahisoa setšoantšo se secha, se fapaneng. Sekhahla sa 'nete sa ho boloka setšoantšo se ipapisitse le maemo a fapaneng joalo ka setšoantšo se ikhethileng, hore na se bonts'oa nako e kae se sa fetohe, mocheso ka har'a phanele esita le mofuta o ikhethileng oa phanele ka lebaka la phapang ea tlhahiso har'a bahlahisi ba liphanele.

www.surenoo.com

Leqephe: 20 ho 21

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Setšoantšo sa S3ALG25664A

8.3 Mokhoa oa ho Qoba ho Khomarela Setšoantšo?
- Leka ho se sebelise Graphic ka setšoantšo se "tsitseng" skrineng nako e fetang lihora tse 2. - Haeba o sebelisa sebali sebakeng se phahameng sa mocheso 'me se na le setšoantšo se bonts'itsoeng se hananang le likhothaletso tse ho "Basebelisi ba Lisebelisoa" tse ka tlase, thupa ea setšoantšo e ka etsahala kamora metsotso e 30 feela. Fetola li-setting tsa skrine sa hau ka nepo. - Fokotsa yuniti nakong ea nako e telele ea ho se sebetse joalo ka lihora tseo lebenkele le koetsoeng ka tsona kapa ka nako eo sesebelisoa se sa sebelisoeng. - Sebelisa skrineng se nang le bokamorao bo botšo kapa bo bohlooho bo bohareng, se ikemiselitseng ho sebetsa haeba sesebelisoa se sa sebetse ka nako e fetang metsotso e 5-10. - Qoba ho beha sebali libakeng tse nang le moea o fokang hantle kapa libakeng tse tla baka mocheso o mongata ho potoloha sebono bakeng sa baetsi ba software. - Ha u hlalosa li-icon, likonopo kapa lifensetere tse skrineng, leka ho sebelisa lipaterone tsa block ho fapana le mela e ikhethileng e le meeli ea ho arola ponts'o libakeng tse ikhethileng. - Haeba ho hlokahala ho hlahisa setšoantšo se tsitsitseng, leka ho sebelisa mebala e lumellanang le boemo ba bohlooho bo bohareng moeling oa mebala e 'meli e sa tšoaneng,' me u fetole moeli oa meeli hang ka nako. - Leka ho sebelisa mebala e pherese e bohareng bakeng sa libaka tse tla ba le nako e telele ea ho bonts'a kapa u lule u tsitsitse ha likarolo tse ling tsa menyetla li fetoha.
8.4 Mokhoa oa ho Lokisa Setšoantšo se Sticking?
Ho fapana le litlamorao tse ke keng tsa etsolloa hangata tse "chesang" tse amanang le ho otloloha view lisebelisoa tsa ho bonts'a phosphor tse kang CRTs, setšoantšo se bolokiloeng ponts'o ea Graphic se ka khutlisetsoa morao hangata ho isa sebakeng se sa bonahaleng ka botlalo. Leha ho le joalo, ho teba ha lisosa (joalokaha ho hlalositsoe ka holimo) tsa setšoantšo se bolokiloeng ponts'ong e itseng, hammoho le lintlha tse fapaneng (sheba "Bakeng sa Baetsi ba Lisebelisoa" ka holimo) moo setšoantšo se bolokiloeng se entsoeng, se tla laela boemo ba ho qetela. ya ho busetsa morao. Tsela e 'ngoe ea ho hlakola setšoantšo se bolokiloeng phanele ke ho tsamaisa skrini (ho beha leihlo) ka mokhoa oa "botšo bohle" bakeng sa lihora tse 4-6. Ho boetse hoa thusa ho etsa sena sebakeng se phahameng sa mocheso oa hoo e ka bang 35º ho isa ho 50ºC. Hape, ho sebelisa skrine e matla e nang le nalane e ntšo nakong ea nako e telele e sa sebetseng ke tsela e ntle ea ho qoba mathata a ho boloka litšoantšo.
8.5 Na setšoantšo se khomarelang se koahetsoe ke Warranty ea Surenoo RMA?
Ho khomarela setšoantšo ke ntho e tloaelehileng ho theknoloji ea Graphic Display ka boeona, 'me ka hona, ho hlaha ha phello ena ea "ghosting" ho nkoa e le ts'ebetso e tloaelehileng ke baetsi ba li-module tsa Graphic display tse kopantsoeng le tharollo ea kajeno ea ho hlahloba. Surenoo ha e fane ka tumello ea hore ho be le pontšo leha e le efe khahlanong le ketsahalo ea ho khomarela setšoantšo. Re u eletsa ka matla hore u latele likhothaletso tsa ts'ebetso tse thathamisitsoeng kaholimo ho qoba ho etsahala ha ketsahalo ena.

Ke pheletso ea database.

www.surenoo.com

Leqephe: 21 ho 21

Litokomane / Lisebelisoa

Surenoo Display SLG25664A Series Graphic LCD module [pdf] Bukana ea Mosebelisi SLG25664A Series, SLG25664A Series Graphic LCD Module, Graphic LCD Module, LCD Module, LCD

Litšupiso

• Bukana ea Mosebelisi