4 Knob RGBW LED RF Controller
Nomoro ea mohlala: V4-K
4 Channel RGBW/taolo e hole e se nang mohala/Four PWM frequency/linear kapa logarithmic dimming/pontsho ya dinomoro
Likaroloana
- RGBW kamehla voltage LED RF controller, e ka boela ea sebelisoa e le RGBW RF remote.
- 4 knob dimming, ponts'o ea linomoro tsa dijithale le ts'ebetso e bonolo ea linotlolo.
- Bapisa le RF 2.4G sebaka se le seng kapa libaka tse ngata tsa RGBW taolo e hole ka boikhethelo.
- Maemo a 256 0-100% a fifala ka thelelo ntle le khanya ea letho.
- E hahiloe ka mokhoa o matla oa 10, e kenyelletsa ho tlola kapa ho fetoha butle-butle.
- PWM maqhubu 1000/2000/4000/8000Hz khethang ho tsona.
- Logarithmic kapa linear dimming curve e ka khethoa.
Tekheniki Parameters
| Kenyeletso le Sephetho | |
| Keletso voltage | 12-24VDC |
| Kenya hona joale | 16.5A |
| Sephetho voltage | 4 x (12-24)VDC |
| Sephetho sa hajoale | 4CH,4A/CH |
| Matla a hlahisang | 4 x (48-96)W |
| Mofuta oa tlhahiso | Kamehla voltage |
| Tikoloho | |
| Mocheso oa ts'ebetso | Ta: -30 OC ~ +55 OC |
| Thempereichara ea boholo (Boholo.) | T c: +85OC |
| Lintlha tsa IP | IP20 |
| Tiisetso le Tshireletso | |
| Tiisetso | 5 lilemo |
| Tshireletso | Khutlisa polarity |
| Ho fokotsa data | |
| Lets'oao la ho kenya | Knob + Senotlolo + RF 2.4GHz |
| Bohole ba ho laola | 30m(Sebaka se senang mekoallo) |
| Sekala se boputsoa se fifalang | 256 maemo |
| Lebala la dimming | 0 -100% |
| Lekhalo le nyenyefatsang | Logarithmic kapa linear |
| Maqhubu a PWM | 1000/2000/4000 / 8000Hz |
| Tšireletseho le EMC | |
| EMC e tloaelehileng (EMC) | EN301 489, EN 62479 |
| Tekanyetso ea polokeho(LVD) | EN60950 |
| Thepa ea Radio(RED) | EA-300-TZ |
| Setifikeiti | CE,EMC,LVD,RED |
Mechanical Structures le Installations
Setšoantšo sa Wiring
- Sebetsa joalo ka molaoli oa LED oa RGBW
- Sebetsa joalo ka RGBW RF e hole
Tshebetso
4 likonopo tse fifalang
3 maemo a bohlokoa
Tobetsa hakhutšoanyane: Bulela kapa tima lebone. Ha leseli le timme, hlahisa "OFF". Tobetsa nako e telele 5s: Kena RF remote matching state, bonts'a "RLS", ka hare ho 5s, tobetsa konopo ea ho tima / ho tima kapa ea zone ea RGBW RF remote, bonts'a "RLO", papali e atlehile , Nako e telele ea ho hatisa 10s: Ho fihlela pontšo "RLE", hlakola tsohle tse tšoanang RF remote. Tobetsa nako e telele 15s: Khutlisa parameter ea kamehla ea feme, bonts'a "RES".
Tobetsa e khuts'oane: Fetoha lipakeng tsa 10 dynamic change mode (P01~P10). Tobetsa nako e telele 5s: Itokisetse ho seta sephetho sa maqhubu a PWM, ebe o tobetsa konopo e khuts'oane ho switjha lipakeng tsa 1000Hz(“F10”), 2000Hz(“F20”), 4000Hz(“F40”) kapa 8000Hz(“F80”). Maqhubu a phahameng a PWM, a tla baka molumo o tlase oa hona joale, lerata le phahameng la matla, empa a loketse kh'amera (Ha ho li-flickers tsa video). Tobetsa nako e telele konopo ea Mode bakeng sa 2s kapa 10s ea ho qeta nako, tlohela tlhahiso ea maqhubu a PWM.
Tobetsa nakoana: Seta lebelo la mokhoa, switjha lipakeng tsa lebelo la boemo ba 1-10 (S-1, S-9, SF).
Tobetsa nako e telele 5s: Itokisetse ho seta sephetho sa khanya, ebe u tobetsa konopo e khuts'oane ho switjha lipakeng tsa linear curve("CL") kapa logarithmic curve("CE"). Tobetsa nako e telele konopo ea Speed bakeng sa 2s kapa 10s ea nako e felileng, tlohela tlhophiso ea curve e khanyang.
Lethathamo la mekhoa e matla ea RGBW
| Che. | Lebitso | Che. | Lebitso |
| P01 | RGB e tlole | P06 | RGB e nyamela kahare le ho tsoa |
| P02 | RGB e bonolo | P07 | Bofubelu bo nyamela ka hare le ka ntle |
| P03 | 6 tlola ka mebala | P08 | Botala bo nyamela ka hare le ka ntle |
| P04 | 6 mmala o boreleli | P09 | Boputsoa bo fifala kahare le kantle |
| P05 | Bopherese bo bosehla ba cyan bo boreleli | P10 | Bosoeu bo fela ka hare le ka ntle |
4 Knob Controller e sebetsa joalo ka RGBW RF e hole
Taolo ena ea li-knob tse 4 e sebetsa joalo ka RGBW RF e hole e ka ts'oana le selaoli se le seng kapa tse ngata tsa RGBW LED RF. Mosebelisi oa ho qetela a ka khetha mekhoa e loketseng ea papali / hlakola. Ho na le likhetho tse peli bakeng sa khetho:
Sebelisa konopo ea Match ea molaoli
Papali:
Tobetsa hakhutšoanyane konopo ea ho bapisa seamoheli, hang-hang tobetsa konopo ea ho tima/ho tima selaoli sa kotola. Letšoao la LED le khanyang ka makhetlo a 'maloa le bolela hore papali e atlehile.
Hlakola:
Tobetsa 'me u tšoare konopo ea match ea seamoheli bakeng sa li-5s ho hlakola litebelisoa tsohle, Leseli la LED le benya ka potlako makhetlo a 'maloa le bolela hore liremote tsohle tsa RF tse tsamaellanang li hlakotsoe.
Sebelisa Power Restart
Papali:
Tima matla a moamoheli, ebe o bulela matla hape, hang-hang tobetsa konopo ea ho tima/ tima makhetlo a 3 ho selaoli sa kotola. Leseli le panya ka makhetlo a 3 ho bolela hore papali e atlehile.
.Hlakola:
Tima matla a moamoheli, ebe o bulela matla hape, hang-hang tobetsa konopo ea ho tima/ho tima makhetlo a 5 ho selaoli sa kotola. Leseli le panya ka makhetlo a 5 ho bolela hore li-remote tsohle tse tšoanang li hlakotsoe.
Setlhophiso sa curve e nyenyefatsang
Buka ea Mosebelisi Ver 1.0.1
Litokomane / Lisebelisoa
 |
Superlightingled V4-K 4 Knob RGBW LED RF Controller [pdf] Bukana ea Mosebelisi V4-K 4 Knob RGBW LED RF Controller, V4-K, 4 Knob RGBW LED RF Controller, RGBW LED RF Controller, LED RF Controller, RF Controller, Controller |
