SuperLightingLED R9 Ultrathin RGB le RGBW RF Remote Controller

Tlhahisoleseding ya Sehlahiswa

• Lebitso la Sehlahiswa: Ultrathin RGB/RGBW RF Remote Controller
• Nomoro ea Mohlala: R9
• Mofuta oa LED o tšehetsoeng: RGB kapa RGBW
• Mofuta oa Bohlokoa: 27 linotlolo
• Range e se nang mohalalimithara tse 30
• Mofuta oa Leshala: CR2032
• Mebala e Fumanehang: White & Black

Litaelo tsa Tšebeliso ea Sehlahisoa

1. Netefatsa hore molaoli oa LED oo u o sebelisang o tšehetsa li-LED tsa RGB kapa tsa RGBW.
2. Kenya betri ea CR2032 ka har'a remote control.
3. Netefatsa hore lebone la sesupo sa LED ho remoutu le sebetsa.
4. Ho bapisa remote control le seamoheli, latela litaelo tsa ho para tse fanoeng ke moetsi oa lilaoli tsa LED.
5. Ha o se o atlehile ho penta, o ka sebelisa remote control ho laola mabone a LED a RGB kapa RGBW.
6. Sebelisa linotlolo tse 27 ho remote control ho lokisa litlhophiso tse fapaneng tsa mabone joalo ka 'mala, khanya le mokhoa.
7. Sebaka sa waelese sa remote control se fihla ho limithara tse 30. Etsa bonnete ba hore u ka har'a sebaka sena bakeng sa ts'ebetso e nepahetseng.
8. Hopola ho khutlisa betri ea CR2032 ha e felloa ke matla.

Ultrathin RGB/RGBW RF Remote Controller

Nomoro ea Mohlala: R9

Sebaka sa 1 RGB kapa RGBW / 27 senotlolo / sebaka se se nang mohala sa 30m sebaka / betri ea CR2032

Likaroloana

• Etsa kopo ho RGB kapa RGBW LED controller.
• Sebaka se seng le se seng se ka tsamaisana le moamoheli a le mong kapa ho feta.
• CR2032 betri e tsamaisoang.
• Sebetsa ka lebone la sesupo sa LED.
• White & Black e fumaneha.

Tekheniki Parameters

Kenyeletso le Sephetho
Letshwao la tlhahiso	RF (2.4GHz)
Sebetsa voltage	3VDC(CR2032)
Ho sebetsa hona joale	<5mA
Boemo ba ho ema	<10μA
Nako ea ho ema	1 selemo
Sebaka se hole	30m(Sebaka se senang mekoallo)

Tšireletseho le EMC

EMC e tloaelehileng (EMC)	ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4
Tekanyetso ea polokeho	EN 62368-1:2020+A11:2020
Thepa ea Radio(RED)	ETSI EN 300 328 V2.2.2
Setifikeiti	CE,EMC,RED

Tikoloho
Mocheso oa ts'ebetso	Ta: -30 OC ~ +55 OC
Sephutheloana
Boholo	L114 x W65 x, x H20mm
Boima bo felletseng	0.058kg
Tiisetso
Tiisetso	5 lilemo

Mechanical Structures le Installations

• Ho lokisa remote, ho fanoa ka likhetho tse peli bakeng sa khetho:
  • Khetho ea 1: lokisa "remote" sets'oants'o se ka morao leboteng ka li-screw tse peli.
  • Khetho ea 2: khomarela "remote" e ts'oereng leboteng ka pester.

Motshoa-morao
Hlokomela: Haeba lets'oao la LED le sa bulehe ha o tobetsa konopo, ke ka lebaka la betri e shoeleng kapa ho kopana ho hobe ho bakoang ke ho plugging hangata, ka kopo khutlisetsa betri, kapa u phahamise shrapnel ea betri ka screwdriver.

Ts'ebetso ea senotlolo

Hula letlapa la sethibelo sa betri ea polasetiki sebakeng sa betri se tlase ho remoutu pele senotlolo se sebetsa.

• Mokhoa+/-: Mokhoa o mokhuts'oane oa switch switch o hahelletsoeng ka har'a molaoli, o tobetsa nako e telele 2s Mode + run mode cycle, tobetsa nako e telele 2s Mode- tsamaisa mokhoa oa pele. Remoutu ke "Default 10 mode" ha e ts'oana le SPI controller e nang le 32 dynamic mode, ka kopo, tobetsa konopo ea 2s Mode+ nako e telele pele.
• Lebelo+/-: Fetola lebelo la mokhoa o matla, tobetsa maemo a 10 ka nako e khuts'oane, tobetsa 2s ho fumana lebelo le potlakileng haholo / le butle haholo.
• E khanyang+/-: Fetola khanya, tobetsa maemo a 10 ka nako e khuts'oane, tobetsa 1-6s bakeng sa phetoho e tsoelang pele ea maemo a 256.
• R/G/B+/-: Fetola khanya ea R/G/B ka ho latellana, tobetsa maemo a 10 ka bokhutšoane, tobetsa 1-6s bakeng sa tokiso e tsoelang pele ea maemo a 256 ho fihlela limilione tsa mebala.
• Bosoeu: Fetola 'mala o mosoeu, bakeng sa leseli la RGB, konopo e khuts'oane ea ho bulela / tima tšoeu(RGB mix), tobetsa 1-6s nako e telele fetola saturation kamehla. Bakeng sa khanya ea RGBW, tobetsa konopo ea W e tla fetola khanya ea kanale ea W. tobetsa e khutšoanyane bulela/ tima kanale ea W, tobetsa ka nako e telele 1-6s fetola khanya ea kanale ea W ka ho tsoelang pele.
• Sebaka: Tobetsa e khuts'oane hopola ketsahalo eo, tobetsa 2 e telele boloka 'mala oa hajoale sebakeng sa ketsahalo. Letšoao la LED le tla khantša nako e telele ha u boloka OK.

Sebelisa lesela la LED la R9 le le leng le le leng la SPI digital

• Beha bolelele ba strip ea LED [Nomoro ea Pixel(8~1024)]. * + 3 nomoro + * bakeng sa mohlalaampLe:
  • * 032* beha nomoro ea pixel ho 32.
  • * 600* beha nomoro ea pixel ho 600.
  • * 1024* beha nomoro ea pixel ho 1024.
• Beha mofuta oa chip ea LED. * + 2 nomoro + *
  • *11*:TM1803
  • *12*: TM1809, TM1804, TM1812, UCS1903, UCS1909, UCS1912, SK6813, UCS2903, UCS2909, UCS2912, WS2811, WS2812, WS2813, WS2815, WPS
  • * 13*:TM1829
  • * 14*: TLS3001, TLS3002
  • * 15*:GW6205
  • * 16*:MBI6120
  • * 17*: TM1814B(RGBW)
  • * 18*: SK6812(RGBW), WS2813(RGBW), WS2814(RGBW)
  • * 19*: UCS8904B(RGBW)
  • * 21*:LPD6803, LPD1101, D705, UCS6909, UCS6912
  • * 22*:LPD8803, LPD8806
  • * 23*:WS2801, WS2803
  • * 24*:P9813
  • 25*:SK9822
  • * 31*:TM1914A
  • * 32*:GS8206,GS8208
  • * 33*: UCS2904
  • 34*: SM16804
  • 35*: SM16825
  • * 36*: SM16714(RGBW)
  • * 37*: UCS5603
  • * 38*: UCS2603
  • * 39*: SM16714D
• Beha tatellano ea RGB ea LED. * + 1 nomoro + *
  • *1*:RGB, *2*:RBG, *3*:GRB, *4*:GBR, *5*:BRG, *6*:BGR.

Match Remote Control (mekhoa e 'meli ea papali)
Mosebelisi oa ho qetela a ka khetha mekhoa e loketseng ea papali / hlakola. Ho na le likhetho tse peli bakeng sa khetho:

Sebelisa konopo ea Match ea molaoli

• Papali:
  • Tobetsa hakhutšoanyane konopo ea ho bapisa, hang-hang tobetsa konopo ea ho tima/ho tima remote. Letšoao la LED le khanya ka potlako makhetlo a 'maloa le bolela hore papali e atlehile.
• Hlakola:
  • Tobetsa 'me u tšoare konopo ea match bakeng sa li-5s ho hlakola litebelisoa tsohle, Letšoao la LED le bonesa ka potlako makhetlo a 'maloa le bolela hore liremote tsohle tse tsamaellanang li hlakotsoe.

Sebelisa Power Restart

• Papali:
  Tima motlakase, ebe o bulela motlakase, pheta hape. Tobetsa hang hang konopo ea ho tima/ho tima makhetlo a 3 ho remoutu. Leseli le panya ka makhetlo a 3 ho bolela hore papali e atlehile.
• Hlakola:
  • Tima motlakase, ebe o bulela motlakase, pheta hape. Tobetsa hang hang konopo ea ho tima/ho tima makhetlo a 5 ho remoutu.
  • Leseli le panya ka makhetlo a 5 ho bolela hore li-remote tsohle tse tšoanang li hlakotsoe.

Lintlha tsa polokeho

1. Bala litaelo tsohle ka hloko pele u qala ho kenya.
2. Ha u kenya betri, ela hloko polarity e ntle le e ntle ea betri. Nako e telele ntle le remote control, tlosa betri. Ha sebaka se hole se ntse se fokola 'me se sa utloe letho, khutlisetsa betri.
3. Haeba ho se karabo ho tsoa ho moamoheli, ka kopo amahanya remote hape.
4. Tšoara remote ka bonolo, hlokomela hore u se ke ua oa.
5. Bakeng sa sebaka se ka hare le se omileng sebelisa feela.

Litokomane / Lisebelisoa

SuperLightingLED R9 Ultrathin RGB le RGBW RF Remote Controller [pdf] Buka ea Taelo R9, R9 Ultrathin RGB le RGBW RF Remote Controller, Ultrathin RGB le RGBW RF Remote Controller, RGB le RGBW RF Remote Controller, RGBW RF Remote Controller, Remote Controller, Controller

Litšupiso

• Bukana ea Mosebelisi