X-NUCLEO-OUT14A1
Boto ea katoloso ea lihlahisoa tsa dijithale tsa indasteri e thehiloeng ho
ISO808A-1 bakeng sa STM32 Nucleo
STM32 Open Development Tikoloho
Likahare tsa Tataiso ea ho Qala ka Potlako
Hardware e felileview
Tlhaloso ea Hardware
- Letlapa la X-NUCLEO-OUT14A1 la katoloso ea tlhahiso ea dijithale tsa indasteri bakeng sa STM32 Nucleo e fana ka tikoloho e matla le e feto-fetohang bakeng sa tlhahlobo ea bokhoni ba ho khanna le tlhahlobo ea ISO808A-1 (Octal High Side Switch, e nang le galvanic e kenelletseng ka thoko, 20 MHz SPI, mocheso o feteletseng. le Power Good diagnostics, high inductive load driving capability) ka mojulung oa tlhahiso ea dijithale o amanang le 1.0 A (max. per channel) mejaro ea indasteri.
- X-NUCLEO-OUT14A1 e kopanya ka ho toba microcontroller ho STM32 Nucleo ka Arduino UNO R3 (sebopeho sa kamehla) le li-connectors tsa ST morpho (ho ikhethela, tse sa kenngoeng). Karohano ea galvanic lipakeng tsa lehlakore la logic le lehlakore la ts'ebetso ea sistimi e netefalitsoe ke karohano ea 2k VRMS e kenelletseng ho ISO808A-1. Boto ea katoloso e ka hokahanngoa le boto ea ntlafatso ea NUCLEO-F401RE kapa NUCLEO-G431RB.
- Hape hoa khonahala ho lekola sistimi e entsoeng ke X-NUCLEO-OUT14A1 tse peli tse koaletsoeng tse nolofalletsang ketane ea daisy e ts'ehelitsoeng, kapa lits'ebetso tse kopanyang X-NUCLEO-OUT14A1 le liboto tse ling tsa katoloso, ho fana ka ho lumellana le matšoao a 'mapa ho lihokelo tsa Arduino.
Likarolo tsa mantlha:
- Boto e le 'ngoe ea katoloso e u lumella ho lekola mochini o hlahisoang oa octal-channel digital o nang le bokhoni ba 1.0 A (max.) ka mocha ka mong.
- Sebaka sa ho sebetsa ho fihla ho 36 V/8.0 A
- Phallo e tlase ea matla (RON(MAX) = 260 mΩ)
- Ho bola ka potlako bakeng sa meroalo e meholo ea inductive
- 20MHz SPI Control mode
- Lets'oao le bulelang Output
- Tlas'a voltage notletsoe
- Litšireletso tse ngata haholo le mocheso o feteletseng
- Matla Ho lemoha hantle le tlhahlobo ea tlhokomeliso
- Sephutheloana sa PowerSO36
Lihlahisoa tsa Bohlokoa letlapeng la katoloso la Nucleo: ISO808A-1
Octal High Side Switch e nang le karohano e kenelletseng ea galvanic, SPI le bokhoni bo phahameng ba ho khanna mojaro o matla Litaba tsa morao-rao li fumaneha ho www.st.com
X-NUCLEO-OUT14A1
SW meaho e felileview
Software Tlhaloso :
Sephutheloana sa software ea katoloso ea X-CUBE-IPS bakeng sa STM32Cube e sebetsa ho STM32 microcontroller mme e kenyelletsa mokhanni ho laola liboto tsa katoloso tse amohelang Intelligent Power Switches ICs.
Software e fana ka tharollo e theko e tlaase le e bonolo ho e sebelisa bakeng sa nts'etsopele ea li-module tsa single, dual, quad le octal digital output bakeng sa lisebelisoa tsa 0.7A, 1.0A, 2.5 A le 5.7A, tse u lumellang hore u hlahlobe habonolo bokhoni ba ho khanna le ho hlahloba. Liphetoho tsa Matla a Bohlale.
Katoloso e hahiloe ho theknoloji ea software ea STM32Cube ho nolofatsa ts'ebetso ho li-microcontroller tse fapaneng tsa STM32. E lumellana le liboto tsa ntlafatso tsa NUCLEO-F401RE kapa NUCLEOG431RB.
Likarolo tsa Bohlokoa:
- Sample ts'ebeliso ea ho lekola li-module tsa mantlha tsa tlhahiso ea dijithale ka ho bokella XNUCLEO-OUT12A1 kapa X-NUCLEO-OUT14A1. Software e boetse e sebelisa sebali sa nako ea PWM ho hlahisa lipaterone tsa nako le nako mocheng oa tlhahiso bakeng sa liboto tsa katoloso.
- 20MHz SPI Control mode
- Daisy chaining tšehetso
- Sample kopo ea ho sebelisana le STSW-IFAPGUI PC Software.
Lintlha tsa morao-rao li fumaneha ho www.st.com
X-CUBE-IPS
Mohlala oa mohlalaample: Bill of Material
Litlhoko tsa pele tsa HW
- Boto ea katoloso ea 1x (X-NUCLEO-OUT14A1)
- Boto ea ntlafatso ea 1x STM32 Nucleo ea NUCLEO-F401RE, NUCLEO-G431RB
- 1x thapo ea USB ea mofuta oa A ho ea ho mini-B (bakeng sa NUCLEO-F401RE) kapa 1x thapo ea USB ea mofuta oa A ho ea ho micro-B (bakeng sa NUCLEO-G431RB
- 1x Laptop/PC e nang le Windows 7, 8 kapa ka holimo
Ho hlophisoa ha Hardware
Tlhophiso ea li-Jumpers
| J4 |  |
Logic Side ea ISO808A-1 e fanoe ke seporo sa 3v3 |
 |
Logic Side ea ISO808A-1 e fanoe ke EXT_Vdd rail | |
| J3 |  |
STATUS, PGOOD le OUT_EN matshwao a sa phahamiswang (D11, D15 le D16 ha a sebetse) |
 |
STATUS le OUT_EN matšoao a phahamisitsoe (D11 le D15 li sebetsa) | |
| J9 |  |
E tima ts'ireletso ea EMC ho seporo sa phepelo (phepelo ea analog ≤ 33V) |
 |
E nolofalletsa ts'ireletso ea EMC ho seporo sa phepelo (phepelo ea analog ≤ 36V) | |
| J10 | |
E nolofalletsa tšireletso ea polarity e ka morao ho seporo sa thepa ea analog |
|
E thibela tšireletso ea polarity e ka morao ho seporo sa thepa ea analog | |
| J6, j7 |  |
E nolofalletsa li-LED tse tala D3 ho D6, le D7 ho D10 |
 |
E thibela li-LED tse tala tsa D3 ho ea ho D6, le D7 ho ea ho D10 |
| J12 | J13 | |
 |
 |
Boto e le 'ngoe (daisy chaining OFF) |
 |
 |
Boto 0 Configuration (daisy chaining ON) |
 |
 |
Boto 1 Configuration (daisy chaining ON) |
Mohlala oa mohlalaampLe: lisebelisoa tsa software
Litlhoko tsa pele tsa SW
• STM32CubeProg: All-in-one multi-OS software tool bakeng sa ho etsa mananeo a lihlahisoa tsa STM32 kapa STSW-LINK009: ST-LINK/V2-1 (NUCLEO-F401RE), ST-LINK/V3 (NUCLEO-G431RB) mokhanni oa USB
• X-CUBE-IPS: sephutheloana sa software ho kenyelletsa le ex ya kopoamples bakeng sa NUCLEO-F401RE, NUCLEO-G431RB e tla amahanngoa le X-NUCLEO-OUT03A1, X-NUCLEO-OUT04A1, X-NUCLEO-OUT05A1, X-NUCLEO-OUT06A1, XNUCLEO-OUT08A1, XOUT-OUT09A1, XOUT-OUT10A1 NUCLEO-OUT11A1, X-NUCLEO- UT12A1, X-NUCLEO-OUT13A1, X-NUCLEO-OUT14A1, X-NUCLEO-OUT15A1, X-NUCLEO-OUT19A1, X-NUCLEO-OUTXNUMXAXNUMX
Mohlala oa mohlalaamples bakeng sa mekhoa e fapaneng ea ts'ebetso
X-NUCLEO-OUT14A1 e tla le li-binary sets tse 2 tsa FW (ka boto ea nucleo)
- Mohlala oa kopoample binaries bakeng sa li-IDE tse tharo tsa litšupiso ka har'a sephutheloana sa X-CUBE-IPS
- EWARM-OUT12_14-STM32F4xx_Nucleo.bin | EWARM-OUT12_14-STM32G4xx_Nucleo.bin
- MDK-ARM-OUT12_14-STM32F4xx_Nucleo.bin | MDK-ARM-OUT12_14-STM32G4xx_Nucleo.bin
- STM32CubeIDE-OUT12_14-STM32F4xx_Nucleo.bin | STM32CubeIDE-OUT12_14-STM32G4xx_Nucleo.bin
- Mohlala oa kopoample binaries (ka liboto tsa nucleo) tse lumellanang le STSW-IFAPGUI
- STSW-OUT12F4
- STSW-OUT12G4
Hang ha boto ea Nucleo e hoketsoe ka har'a PC, ho bonoa sesebelisoa sa USB_STORAGE, binary ea FW e ka hlophisoa ka har'a boto ea Nucleo ka ho hula le ho theola opereishene.
Kopana le STSW-IFAPGUI
- Li-binary tsa Firmware STSW-OUT12F4.bin le STSW-OUT12G4.bin li lumella ho sebelisana ha X-NUCLEOOUT14A1 ka sesebelisoa sa SW se sebetsang ho PC (STSW-IFAPGUI).
- Sesebelisoa sa SW (STSW-IFAPGUI) se fumaneha mahala mahala sehokelong se latelang.
- Bakeng sa ts'ebeliso ea STSW-IFAPGUI, ka kopo sheba tokomane e fumanehang ho: https://www.st.com/en/embedded-software/stsw-ifapgui.html#documentation
- Ho fumaneha ho reriloeng bakeng sa tsamaiso ea X-NUCLEO-OUT14A1 ka STSW-IFAPGUI: Q1-2023
Litokomane tsohle li fumaneha ho "DOCUMENTATION tab" ea lihlahisoa tse amanang webleqephe
X-NUCLEO-OUT14A1
- DB4836: Boto ea katoloso ea dijithale tsa indasteri e thehiloeng ho ISO808A-1 bakeng sa STM32 Nucleo
- UM3082: Ho qala ka boto ea katoloso ea liindasteri tsa X-NUCLEO-OUT14A1 bakeng sa STM32 Nucleo - Buka ea mosebelisi
- Lits'ebetso, Gerber files, BOM
X-CUBE-IPS - DB4735: Katoloso ea software bakeng sa STM32Cube e khanna tlhahiso ea dijithale ea indasteri e thehiloeng ho IPS
- UM3035: Ho qala ka software ea X-CUBE-IPS e hlahisoang ke indasteri ea dijithale bakeng sa STM32 Nucleo - Buka ea mosebelisi
STSW-IFAPGUI (E fumaneha. Q1-2023) - DB3775: Sebopeho sa mosebelisi bakeng sa liboto tsa tlhahlobo tsa IPS tsa indasteri tse thehiloeng ho STM32 Nucleo - Data Brief
- UM2509: STSW-IFAPGUI, sebopeho se tloaelehileng sa mosebelisi bakeng sa liboto tsa katoloso ea Li-Switch Power tse bohlale - Buka ea mosebelisi
STSW-OUT12F4 - DB4925: Firmware ea pontšo bakeng sa NUCLEO-F401RE e nolofalletsang STSW-IFAPGUI ho X-NUCLEO-OUT12A1 le X-NUCLEO-OUT14A1 boto ea katoloso - Brief ea data
STSW-OUT12G4 - DB4926: Firmware ea pontšo bakeng sa NUCLEO-G431RB e nolofalletsang STSW-IFAPGUI ho X-NUCLEO-OUT12A1 le X-NUCLEO-OUT14A1 boto ea katoloso - Tlhaloso ea lintlha
STM32 ODE Ecosystem
TŠEBELETSO EA POTLAKO, E THEFELLANG LE NTSHETSO-PELE
STM32 Open Development Environment (ODE) ke mokhoa o bulehileng, o tenyetsehang, o bonolo le o theko e tlaase oa ho hlahisa lisebelisoa tse ncha le lisebelisoa tse thehiloeng ho lelapa la microcontroller la STM32 32-bit hammoho le likarolo tse ling tsa morao-rao tsa ST tse amanang le liboto tsa ho atolosa. E nolofalletsa prototyping e potlakileng e nang le likarolo tse ka pele tse ka fetoloang ka potlako ho ba meralo ea ho qetela.
STM32 ODE e kenyelletsa lintlha tse hlano tse latelang:
- Liboto tsa nts'etsopele ea STM32 Nucleo. Letoto le felletseng la liboto tsa nts'etsopele tse theko e tlaase bakeng sa letoto lohle la li-microcontroller tsa STM32, tse nang le bokhoni bo sa lekanyetsoang ba katoloso e kopaneng, 'me e na le debugger/programer e kopaneng.
- STM32 Nucleo mapolanka a katoloso. Liboto tse nang le ts'ebetso e eketsehileng ho eketsa kutlo, taolo, khokahanyo, matla, molumo kapa mesebetsi e meng ha ho hlokahala. Maboto a katoloso a hoketsoe holim'a liboto tsa nts'etsopele ea STM32 Nucleo. Mesebetsi e rarahaneng haholoanyane e ka finyelloa ka ho bokella liboto tse eketsehileng tsa katoloso
- Software ea STM32Cube. Sehlopha sa lisebelisoa tse sa lefelloeng le litene tsa software tse kentsoeng ho etsa hore tsoelo-pele e potlakileng le e bonolo ho STM32, ho kenyelletsa le Hardware Abstraction Layer, middleware le STM32CubeMX PC-based configurator le code generator.
- STM32Cube software ea katoloso. Software ea katoloso e fanoa mahala bakeng sa tšebeliso le liboto tsa katoloso tsa STM32 Nucleo, 'me e tsamaellana le moralo oa software oa STM32Cube.
- Lisebelisoa tsa STM32Cube Sete ya tshebetso exampLes bakeng sa tse ling tsa linyeoe tse atileng haholo tsa ts'ebeliso tse hahiloeng ka ho sebelisana le maemo le ho sebelisana ha liboto tsa nts'etsopele ea STM32 Nucleo le katoloso, ka software ea STM32Cube le katoloso.
The STM32 Open Development Environment e tsamaisana le palo ea li-IDE tse kenyeletsang IAR EWARM, Keil MDK, mbed le libaka tse thehiloeng ho GCC.
STM32 Open Development Tikoloho: tsohle tseo o li hlokang
Motsoako oa mapolanka a mangata a ka atolosoang a ipapisitseng le lihlahisoa tsa khoebo tse etellang pele le software ea modular, ho tloha ho mokhanni ho isa boemong ba ts'ebeliso, e etsa hore ho be le prototyping e potlakileng ea mehopolo e ka fetoloang hantle hore e be meralo ea ho qetela.
Ho qala moralo oa hau:
- Khetha liboto tse nepahetseng tsa STM32 Nucleo development board (MCU) le katoloso (X-NUCLEO) (li-sensor, khokahanyo, molumo, taolo ea makoloi jj.) bakeng sa ts'ebetso eo u e hlokang.
- Khetha tikoloho ea hau ea nts'etsopele (IAR EWARM, Keil MDK, le li-IDE tse thehiloeng ho GCC) 'me u sebelise lisebelisoa le software ea mahala ea STM32Cube.
- Khoasolla software eohle e hlokahalang ho tsamaisa ts'ebetso ho liboto tsa katoloso tsa STM32 Nucleo tse khethiloeng.
- Kopanya moralo oa hau 'me u o kenye boto ea nts'etsopele ea STM32 Nucleo.
- Ebe u qala ho hlahisa le ho leka kopo ea hau. Software e ntlafalitsoeng ho STM32 Open Development Environment prototyping hardware e ka sebelisoa ka kotloloho ho
boto ea prototyping e tsoetseng pele kapa moralo oa sehlahisoa le oa ho qetela o sebelisa likarolo tse tšoanang tsa khoebo tsa ST, kapa likarolo tse tsoang lelapeng le le leng le tse fumanoang libotong tsa STM32 Nucleo.
Etela www.st.com bakeng sa lenane le felletseng
Litokomane / Lisebelisoa
 |
STMicroelectronics X-NUCLEO-OUT14A1 Boto ea Katoloso ea Liindasteri tsa Digital [pdf] Bukana ea Mosebelisi X-NUCLEO-OUT14A1 Boto ea Katoloso ea Sephetho sa Liindasteri, X-NUCLEO-OUT14A1, Boto ea Katoloso ea Sephetho sa Dijithale, Boto ea Katoloso ea Sephetho, Boto ea Katoloso ea Sephetho, Boto ea Katoloso, Boto. |
