STMICROELECTRONICS STM32F0DISCOVERY Kit ea ho sibolla
Tlhahisoleseding ya Sehlahiswa
STM32F0DISCOVERY ke sesebelisoa sa ho sibolla li-microcontroller tsa STM32 F0. E na le STM32F051R8T6 microcontroller le ST-LINK/V2 e kenyelelitsoeng bakeng sa ho hlophisa le ho lokisa liphoso. Kit e boetse e kenyelletsa li-LED, likonopo tsa push, likhetho tsa phepelo ea motlakase, le likhokahano tse fapaneng tsa ho hokahanya li-module le lisebelisoa.
Selelekela
STM32F0DISCOVERY e u thusa ho fumana likarolo tsa STM32 F0 Cortex™-M0 le ho ntlafatsa lits'ebetso tsa hau habonolo. E thehiloe ho STM32F051R8T6, e leng STM32 F0 series 32-bit ARM® Cortex™ microcontroller, 'me e kenyelletsa sesebelisoa sa ho lokisa se kentsoeng sa ST-LINK/V2, li-LED, likonopo tsa ho sututsa le boto ea prototyping.
Letlapa la 1. Lisebelisoa tse sebetsang
| Mofuta | Nomoro ea karolo |
| Lisebelisoa tsa tlhahlobo | TLHOKOMELISO EA STM32F0 |
Likopano
Lethathamo la 2 e fana ka tlhaloso ya melawana e meng e sebedisitsweng tokomaneng ya jwale.
Lethathamo la 2. Likopano tsa ON / OFF
| Kopano | Tlhaloso |
| Jumper JP1 ON | jumper e kentsoeng |
| Jumper JP1 OFF | Jumper ha ea kenngoa |
| Solder borokho SBx ON | Lihokelo tsa SBx li koetsoe ka solder |
| Solder borokho SBx OFF | Likhokahano tsa SBx li tlohetsoe li butsoe |
Ho qala ka potlako
STM32F0DISCOVERY ke sesebelisoa sa nts'etsopele se theko e tlase ebile se bonolo ho se sebelisa ho lekola le ho qala nts'etsopele ka "microcontroller" ea STM32 F0. Pele o kenya le ho sebelisa sehlahisoa, ka kopo amohela Tumellano ea Laesense ea Sehlahisoa sa Tlhahlobo ho tsoa ho www.st.com/stm32f0discovery. Bakeng sa tlhaiso-leseling e batsi ka STM32F0DISCOVERY le bakeng sa software ea lipontšo, etela www.st.com/stm32f0discovery.
Rea qala
Latela tatellano e ka tlase ho hlophisa boto ea STM32F0DISCOVERY le ho qala ho
FUMANA sesebelisoa:
- Sheba boemo ba jumper botong, JP2 on, CN2 on (Discovery e khethiloe).
- Hokela boto ea STM32F0DISCOVERY komporong e nang le thapo ea USB 'mofuta oa A ho ea ho mini-B' ka sehokelo sa USB CN1 ho matlafatsa boto. LED LD1 e khubelu (PWR) le LD2 (COM) e khantša 'me LED LD3 e tala ea panya.
- Tobetsa konopo ea mosebelisi B1 ( hukung e ka tlase ka letsohong le letšehali la boto).
- Ela hloko kamoo ho panya ha LED LD3 e tala ho fetohang ho latela USER konopo ea B1.
- Tobetsa ka 'ngoe ho konopo ea USER B1 e netefatsoa ke LED LD4 e putsoa.
- Ho ithuta kapa ho fetola projeke ea DISCOVER e amanang le demo ena, etela www.st.com/stm32f0discovery 'me u latele thuto.
- Fumana likarolo tsa STM32F0, khoasolla le ho kenya mananeo a hlahisitsoeng lethathamong la merero.
- Iketsetse kopo ea hau u sebelisa ex e fumanehangamples.
Litlhoko tsa tsamaiso
- Windows PC (XP, Vista, 7)
- Mofuta oa USB oa mofuta oa A ho ea ho Mini-B thapo ea USB
Sesebelisoa sa nts'etsopele se tšehetsang STM32F0DISCOVERY
- Altium®, TASKING™ VX-toolset
- ARM®, Atollic TrueSTUDIO®
- IAR™, EWARM (IAR Embedded Workbench®)
- Keil™, MDK-ARM™
Odara khoutu
Ho odara thepa ea STM32F0 Discovery, sebelisa khoutu ea STM32F0DISCOVERY.
Likaroloana
The STM32F0DISCOVERY kit e fana ka lintlha tse latelang:
- STM32F051R8T6 microcontroller e nang le 64 KB Flash, 8 KB RAM ka har'a sephutheloana sa LQFP64
- E ka har'a board ST-LINK/V2 e nang le sesebelisoa sa ho khetha ho sebelisa kit joalo ka ST-LINK/V2 e ikemetseng (e nang le sehokelo sa SWD bakeng sa ho hlophisa le ho lokisa liphoso)
- Phepelo ea matla a boto: ka bese ea USB kapa ho tsoa kantle ho 5 V voltage
- Phepelo ea motlakase ea kantle: 3 V le 5 V
- Li-LED tse 'nè:
- LD1 (e khubelu) bakeng sa matla a 3.3 V ho
- LD2 (e khubelu / e tala) bakeng sa puisano ea USB
- LD3 (e tala) bakeng sa tlhahiso ea PC9
- LD4 (putsoa) bakeng sa tlhahiso ea PC8
- Likonopo tse peli tsa push (mosebelisi le reset)
- Katoloso ea hlooho bakeng sa LQFP64 I/Os bakeng sa khokahano e potlakileng ho boto ea prototyping le ho lekola habonolo.
- Ho fanoe ka boto ea tlatsetso e nang le khiti e ka hokeloang sehokelong sa katoloso bakeng sa ho etsa prototyping le ho hlahloba habonolo.
- Palo e kholo ea mahala e ikemiselitseng ho sebetsa firmware exampli fumaneha ka www.st.com/stm32f0discovery ho tshehetsa tshekatsheko le ntshetsopele ya kapele.
Hardware le moralo
STM32F0DISCOVERY e etselitsoe ho potoloha microcontroller ea STM32F051R8T6 ka har'a sephutheloana sa LQFP sa 64-pin. Setšoantšo sa 2 se bontša likhokahano pakeng tsa STM32F051R8T6 le li-peripherals tsa eona (STLINK/ V2, konopo ea push, li-LED le lihokelo). Setšoantšo sa 3 le sa 4 li u thusa ho fumana likarolo tsena ho STM32F0DISCOVERY.
Lethathamo la lintlha tsa STM32F051R8T6
ARM™ MCU ena e tsoetseng pele ea 32-bit low-density e mahareng e tsoetseng pele e nang le tšebetso e phahameng ea ARM Cortex™-M0 32-bit RISC mantlha e na le 64 Kbytes Flash, 8 Kbytes RAM, RTC, li-timers, ADC, DAC, bapisa le likhokahano tsa puisano. .
STM32 F0 e fana ka ts'ebetso ea 32-bit le lintlha tsa bohlokoa tsa STM32 DNA lits'ebetsong tseo ka tloaelo li sebetsanang le li-microcontroller tse 8- kapa 16-bit. E rua molemo ho tsoa ho ts'ebetso ea nako ea nnete, ts'ebetso ea matla a tlase, meaho e tsoetseng pele le lisebelisoa tse amanang le tikoloho ea STM32, e entseng hore STM32 e be sesupo 'marakeng. Hona joale sena sohle se fumaneha bakeng sa lits'ebetso tse sa tsotelleng litšenyehelo. STM32 F0 e fana ka phetoho e ke keng ea lekanngoa le scalability bakeng sa lihlahisoa tsa boithabiso ba lapeng, lisebelisoa le lisebelisoa tsa indasteri.
Sesebelisoa sena se fana ka melemo e latelang.
- Ts'ebetso e phahameng ea khoutu bakeng sa ts'ebetso e ntle le ts'ebetso e ntle ea khoutu bakeng sa ts'ebeliso e tlase ea memori e kenelletseng
- Khokahano ea ts'ebetso e phahameng le lisebelisoa tse tsoetseng pele tsa analog ho ts'ehetsa mefuta e mengata ea lits'ebetso
- Likhetho tsa oache tse feto-fetohang le mekhoa e tlase ea matla e nang le ho tsoha kapele bakeng sa tšebeliso e tlase ea matla
E na le likarolo tse latelang tsa bohlokoa:
- Maemo a mantlha le a ts'ebetso
- ARM® Cortex™-M0 0.9 DMIPS/MHz ho fihla ho 48 MHz
- 1.8/2.0 ho isa ho 3.6 V mefuta ea phepelo
- Khokahano ea ts'ebetso e phahameng
- 6 Mbit/s UART
- 18 Mbit/s SPI e nang le 4- ho isa ho 16-bit data frame
- 1 Mbit/s I²C mokhoa o potlakileng oa ho kopanya
- HDMI CEC
- Taolo e ntlafalitsoeng
- 1x 16-bit 3-phase PWM motor control timer
- Li-timers tsa 5x 16-bit tsa PWM
- 1x 16-bit ea motheo ea nako
- 1x 32-bit PWM timer
- 12 MHz I/O toggling
E kenyelelitsoe ST-LINK/V2
Sesebelisoa sa ST-LINK/V2 sa lenaneo le ho lokisa liphoso se kenyelelitsoe ho STM32F0DISCOVERY. ST-LINK/V2 e kentsoeng e ka sebelisoa ka litsela tse 2 tse fapaneng ho latela maemo a jumper (sheba Lethathamo la 3):
- Lenaneo / lokisa MCU ka sekepeng,
- Lenaneo/roakanya MCU ka botong ya kopo ya kantle o sebedisa thapo e hokeletsweng ho sehokedi sa SWD CN3.
ST-LINK/V2 e kenyellelitsoeng e ts'ehetsa SWD feela bakeng sa lisebelisoa tsa STM32. Ho fumana leseli mabapi le ho lokisa liphoso le likarolo tsa lenaneo, sheba buka ea mosebelisi UM1075 (ST-LINK/V2 in-circuit debugger/programmer bakeng sa STM8 le STM32) e hlalosang ka botlalo likarolo tsohle tsa ST-LINK/V2.
Lethathamo la 3. Jumper e bolela
| Boemo ba jumper | Tlhaloso |
| Ka bobeli li-jumpers tsa CN2 ON | ST-LINK/V2 mesebetsi e lumelletsoe ho etsa mananeo a teng (kamehla) |
| Ka bobeli li-jumpers tsa CN2 OFF | Mesebetsi ea ST-LINK/V2 e lumelletsoe ts'ebeliso ka sehokelo sa kantle sa CN3 (e tšehetsoa ke SWD) |
- Ho sebelisa ST-LINK/V2 ho hlophisa/ho lokisa STM32 F0 ka sekepeng
Ho hlophisa STM32 F0 ka sekepeng, feela hokela li-jumpers tse peli ho CN2, joalo ka ha ho bonts'itsoe ho Setšoantšo sa 8 ka bofubelu, empa u se ke ua sebelisa sehokelo sa CN3 kaha seo se ka sitisa puisano le STM32F051R8T6 ea STM32F0DISCOVERY.
- Ho sebelisa ST-LINK/V2 ho hlophisa/ho lokisa sesebelisoa sa kantle sa STM32
Ho bonolo haholo ho sebelisa ST-LINK/V2 ho hlophisa STM32 ts'ebelisong ea kantle. Tlosa feela li-jumpers tse 2 ho CN2 joalo ka ha ho bonts'itsoe ho Setšoantšo sa 9, 'me u hokele sesebelisoa sa hau ho sehokelo sa CN3 sa debug ho latela Lethathamo la 4.
Hlokomela: SB19 le SB22 li tlameha ho TIMA ha o sebelisa CN3 pin 5 ts'ebelisong ea hau ea kantle.
Lethathamo la 4. Sehokelo sa debug CN3 (SWDPin CN3 Khethollo 1 VDD_TARGET VDD ho tsoa ho kopo 2 SWCLK Oache ea SWD 3 GND Fatše 4 SWDIO SWD data input/output 5 NRST TLHOKOMELISO MCU ea sepheo 6 SWO Reserved 
Phepelo ea motlakase le khetho ea matla
Motlakase o fanoa ke PC e amohelang ka thapo ea USB, kapa ka phepelo ea motlakase ea kantle ea 5V.
Li-diode tsa D1 le D2 li sireletsa likhoele tsa 5V le 3V ho lisebelisoa tsa motlakase tse kantle:
- 5V le 3V li ka sebelisoa e le lisebelisoa tsa motlakase tse tsoang ha boto e 'ngoe ea kopo e hokahantsoe le lithapo tsa P1 le P2. Tabeng ena, likhoele tsa 5V le 3V li fana ka matla a 5V kapa 3V mme tšebeliso ea matla e tlameha ho ba tlase ho 100 mA.
- 5V e ka boela ea sebelisoa e le lisebelisoa tsa motlakase, mohlala, ha sehokelo sa USB se sa hokeloa ho PC.
Tabeng ena, boto ea STM32F0DISCOVERY e tlameha ho tsamaisoa ke yuniti ea phepelo ea motlakase kapa ka lisebelisoa tse thusang tse lumellanang le maemo a EN-60950-1: 2006+A11/2009, 'me e tlameha ho ba Safety Extra Low Vol.tage (SELV) e nang le matla a fokolang a matla.
Li-LED
- LD1 PWR: LED e khubelu e bontša hore boto e tsamaisoa.
- LD2 COM: Tricolor LED (COM) e eletsa ka boemo ba puisano ka tsela e latelang:
- LED e Kgubedu e benyang butle/E Timile: Matla a butswe pele USB e qala
- Leseli le Lefubelu le benyang ka potlako: Ka mor'a puisano ea pele e nepahetseng pakeng tsa PC le STLINK/V2 (palo)
- Leseli le Lefubelu la LED: Ha ho qala pakeng tsa PC le ST-LINK/V2 ho phethetsoe ka katleho
- Green LED On: Kamora ho qala puisano e atlehileng ea sepheo
- Blinking Red / Green LED: Nakong ea puisano le sepheo
- Lebone le Lefubelu la LED: Puisano e felile 'me e lokile
- Orange LED On: Ho hloleha ha puisano
- Mosebelisi LD3: LED ea mosebelisi e motala e hokahaneng le I/O PC9 ea STM32F051R8T6.
- Mosebelisi LD4: LED ea mosebelisi e putsoa e hokahaneng le I/O PC8 ea STM32F051R8T6.
Sututsa likonopo
- B1 USER: Konopo ea mosebelisi e hokahaneng le I/O PA0 ea STM32F051R8T6.
- B2 RESET: Konopo ea ho tobetsa e sebelisetsoang ho RESET STM32F051R8T6.
JP2 (Idd)
Jumper JP2, e ngotsoeng Idd, e lumella tšebeliso ea STM32F051R8T6 ho lekanyetsoa ka ho tlosa jumper le ho hokahanya ammeter.
- Jumper on: STM32F051R8T6 e tsamaisoa (ea kamehla).
- Jumper off: ammeter e tlameha ho kopanngoa ho lekanya motlakase oa STM32F051R8T6, (haeba ho se na ammeter, STM32F051R8T6 ha e sebetse).
OSC oache
- Phepelo ea oache ea OSC
PF0 le PF1 li ka sebelisoa e le GPIO kapa e le oscillator ea HSE. Ka kamehla li-I/O tsena li hlophisoa joalo ka GPIO, kahoo SB16 le SB17 li koetsoe, SB18 e butsoe 'me R22, R23, C13 le C14 ha li na batho. Oache ea kantle ea HSE e ka fuoa MCU ka litsela tse tharo:- MCO ho tsoa ho ST-LINK. Setšoantšo sa MCO sa STM32F103. Leqhubu lena le ke ke la fetoloa, le tsitsitse ho 8 MHz mme le amana le PF0-OSC_IN ea STM32F051R8T6. Tlhophiso e hlokahalang:
- SB16, SB18 E TLOHILE
- R22, R23 e tlositsoe
- SB17 BULA
- Oscillator ka sekepeng. Ho tloha kristale ea X2 (ha e fanoe). Bakeng sa maqhubu a tloaelehileng le li-capacitor le li-resistors, ka kopo sheba ho Lethathamo la lintlha tsa STM32F051R8T6. Tlhophiso e hlokahalang:
- SB16, SB17 SB18 BULA
- R22, R23, C13, C14 e rekisoang
- Oscillator e tsoang kantle ho PF0. Ho tloha ho oscillator ea kantle ho ea ho pin 7 ea sehokelo sa P1. Tlhophiso e hlokahalang:
- SB16, SB17 E TLOHILE
- SB18 BULA
- R22 le R23 li tlositsoe
- MCO ho tsoa ho ST-LINK. Setšoantšo sa MCO sa STM32F103. Leqhubu lena le ke ke la fetoloa, le tsitsitse ho 8 MHz mme le amana le PF0-OSC_IN ea STM32F051R8T6. Tlhophiso e hlokahalang:
- Phepelo ea oache ea OSC 32 KHz
PC14 le PC15 li ka sebelisoa e le GPIO kapa joalo ka LSE oscillator. Ka kamehla li-I/O tsena li hlophisoa joalo ka GPIO, kahoo SB20 & SB21 lia koaloa 'me X3, R24, R25 ha li na batho. Oache ea kantle ea LSE e ka fuoa MCU ka litsela tse peli:- Oscillator ka sekepeng. Ho tsoa ho kristale ea X3 (ha e fanoe). Tlhophiso e hlokahalang:
- SB20, SB21 BULA
- C15, C16, R24 le R25 li rekisitsoe.
- Oscillator e tsoang kantle ho PC14. Ho tsoa ka sejaneng sa oscillator sa kantle ho phini ea 5 ea sehokelo sa P1. Tlhophiso e hlokahalang:
- SB20, SB21 E TLOHILE
- R24 le R25 li tlositsoe
- Oscillator ka sekepeng. Ho tsoa ho kristale ea X3 (ha e fanoe). Tlhophiso e hlokahalang:
Marokho a solder
Lethathamo la 5. Litlhophiso tsa borokho ba Solder
| Borokho | Naha(1) | Tlhaloso |
|
SB16,17 (X2 kristale)(2) |
TLOA | X2, C13, C14, R22 le R23 li fana ka oache. PF0, PF1 li khaotsoe ho P1. |
| ON | PF0, PF1 li hoketsoe ho P1 (R22, R23 le SB18 ha lia lokela ho kenngoa). | |
| SB6,8,10,12 (ea kamehla) | ON | E bolokiloe, u se ke ua fetola. |
| SB5,7,9,11 (Behiloe) | TLOA | E bolokiloe, u se ke ua fetola. |
|
SB20,21 (X3 kristale) |
TLOA | X3, C15, C16, R24 le R25 li fana ka oache ea 32 KHz. PC14, PC15 ha lia hokela ho P1. |
| ON | PC14, PC15 li hoketsoe feela ho P1 (R24, R25 ha ea lokela ho kenngoa). | |
|
SB4 (B2-RESET) |
ON | Konopo ea ho tobetsa ea B2 e hokahane le phini ea NRST ea STM32F051R8T6 MCU. |
| TLOA | B2 konopo ea ho sutumetsa ha e ea hokela phini ea NRST ea STM32F051R8T6 MCU. | |
| SB3
(B1-USER) |
ON | B1 push konopo e hokahane le PA0. |
| TLOA | B1 push konopo ha e ea hokela PA0. | |
| SB1
(VBAT e tsamaisoa ke VDD) |
ON | VBAT e tsamaisoa ka ho sa feleng ho tsoa ho VDD. |
| TLOA | VBAT ha e sebelisoe ho tloha VDD empa pin3 ea P1. | |
| SB14,15 (RX,TX) | TLOA | E bolokiloe, u se ke ua fetola. |
| ON | E bolokiloe, u se ke ua fetola. | |
|
SB19 (NRST) |
ON | Letšoao la NRST la sehokelo sa CN3 le hoketsoe pineng ea NRST ea STM32F051R8T6 MCU. |
| TLOA | Letšoao la NRST la sehokelo sa CN3 ha lea amana le pinana ea NRST ea STM32F051R8T6 MCU. | |
| SB22 (T_SWO) | ON | Letšoao la SWO la sehokelo sa CN3 le hoketsoe ho PB3. |
| TLOA | Letšoao la SWO ha lea hokeloa. | |
| SB13 (STM_RST) | TLOA | Ha ho ketsahalo ho lets'oao la STM32F103C8T6 (ST-LINK/V2) NRST. |
| ON | STM32F103C8T6 (ST-LINK/V2) Letšoao la NRST le hoketsoe ho GND. | |
|
SB2 (BOOT0) |
ON | Letšoao la BOOT0 la STM32F051R8T6 MCU le ts'oaroe tlase ka mochini o hulang oa 510 Ohm. |
| TLOA | BOOT0 pontšo ea STM32F051R8T6 MCU e ka behoa holimo ka 10 KOhm hula-up resistor R27 ho solder. | |
| SB18 (MCO)(2) | ON | E fana ka 8 MHz bakeng sa OSC_IN ho tsoa ho MCO ea STM32F103C8T6. |
| TLOA | Sheba SB16, SB17 tlhaloso. |
Lihokelo tsa katoloso
Lihlooho tsa banna tsa P1 le P2 li ka hokahanya STM32F0DISCOVERY ho boto e tloaelehileng ea prototyping / wrapping. STM32F051R8T6 GPI/Os lia fumaneha lihokelong tsena. P1 le P2 li ka boela tsa hlahlojoa ke oscilloscope, analyzer e utloahalang kapa voltmeter.
Lethathamo la 6. Tlhaloso ea phini ea MCU khahlano le ts'ebetso ea boto
| Setšoantšo sa MCU | Mosebetsi oa boto | ||||||||||
|
Ka sehloohong tshebetso |
Mesebetsi e meng |
LQFP64 | Tobetsa konopo | LED | SWD | OSC | Mahala I/O | Matla phepelo | CN3 | P1 | P2 |
| BOTSOA0 | BOTSOA0 | 60 | 6 | ||||||||
|
NRST |
NRST |
7 |
RETS'ELISITSOE | NRST |
5 |
10 |
|||||
|
PA0 |
2_CTS, IN0,
2_CH1_ETR, 1_INM6, 1_OUT, TSC_G1_IO1, RTC_TAMP2, WKUP1 |
14 |
USER |
15 |
|||||||
|
PA1 |
2_RTS, IN1, 2_CH2,
1_INP, TSC_G1_IO2, EVENTOUT |
15 |
16 |
||||||||
|
PA2 |
2_TX, IN2, 2_CH3,
15_CH1, 2_INM6, 2_OUT, TSC_G1_IO3 |
16 |
17 |
||||||||
|
PA3 |
2_RX, IN3, 2_CH4,
15_CH2, 2_INP, TSC_G1_IO4, |
17 |
18 |
||||||||
| Setšoantšo sa MCU | Mosebetsi oa boto | ||||||||||
| Ka sehloohong tshebetso | Mesebetsi e meng | LQFP64 | Tobetsa konopo | LED | SWD | OSC | Mahala I/O | Matla phepelo | CN3 | P1 | P2 |
| PA4 | 1_NSS / 1_WS, 2_CK, IN4, 14_CH1, DAC1_OUT, 1_INM4, 2_INM4, TSC_G2_IO1 | 20 | 21 | ||||||||
| PA5 | 1_SCK / 1_CK, CEC, IN5, 2_CH1_ETR, (DAC2_OUT), 1_INM5, 2_INM5, TSC_G2_IO2 | 21 | 22 | ||||||||
| PA6 | 1_MISO / 1_MCK, IN6, 3_CH1, 1_BKIN,
16_CH1, 1_OUT, TSC_G2_IO3, EVENTOUT |
22 | 23 | ||||||||
| PA7 | 1_MOSI / 1_SD, IN7,3_CH2, 14_CH1, 1_CH1N, 17_CH1, 2_OUT, TSC_G2_IO4, EVENTOUT | 23 | 24 | ||||||||
| PA8 | 1_CK, 1_CH1, EVENTOUT, MCO | 41 |
25 |
||||||||
| PA9 | 1_TX, 1_CH2, 15_BKIN, TSC_G4_IO1 | 42 | 24 | ||||||||
| Setšoantšo sa MCU | Mosebetsi oa boto | ||||||||||
| Ka sehloohong tshebetso | Mesebetsi e meng | LQFP64 | Tobetsa konopo | LED | SWD | OSC | Mahala I/O | Matla phepelo | CN3 | P1 | P2 |
| PA10 | 1_RX, 1_CH3, 17_BKIN, TSC_G4_IO2 | 43 | 23 | ||||||||
| PA11 | 1_CTS, 1_CH4, 1_OUT, TSC_G4_IO3, EVENTOUT | 44 | 22 | ||||||||
| PA12 | 1_RTS, 1_ETR, 2_OUT, TSC_G4_IO4, EVENTOUT | 45 | 21 | ||||||||
| PA13 | IR_OUT, SWDAT | 46 | SWDIO | 4 | 20 | ||||||
| PA14 | 2_TX, SWCLK | 49 | SWCLK | 2 | 17 | ||||||
| PA15 | 1_NSS / 1_WS, 2_RX,2_CH1_ETR, EVENTOUT | 50 | 16 | ||||||||
| PB0 | IN8, 3_CH3, 1_CH2N, TSC_G3_IO2, EVENTOUT | 26 | 27 | ||||||||
| PB1 | IN9, 3_CH4, 14_CH1,1_CH3N, TSC_G3_IO3 | 27 | 28 | ||||||||
| PB2 kapa NPOR (1.8V
mokhoa) |
TSC_G3_IO4 |
28 |
29 | ||||||||
| PB3 | 1_SCK / 1_CK, 2_CH2, TSC_G5_IO1, EVENTOUT | 55 | SWO | 6 | 11 | ||||||
| Setšoantšo sa MCU | Mosebetsi oa boto | ||||||||||
| Ka sehloohong tshebetso | Mesebetsi e meng | LQFP64 | Tobetsa konopo | LED | SWD | OSC | Mahala I/O | Matla phepelo | CN3 | P1 | P2 |
| PB4 | 1_MISO / 1_MCK, 3_CH1, TSC_G5_IO2, EVENTOUT | 56 | 10 | ||||||||
| PB5 | 1_MOSI / 1_SD, 1_SMBA, 16_BKIN, 3_CH2 | 57 | 9 | ||||||||
| PB6 | 1_SCL, 1_TX, 16_CH1N, TSC_G5_IO3 | 58 | 8 | ||||||||
| PB7 | 1_SDA, 1_RX, 17_CH1N, TSC_G5_IO4 | 59 | 7 | ||||||||
| PB8 | 1_SCL, CEC, 16_CH1, TSC_SYNC | 61 | 4 | ||||||||
| PB9 | 1_SDA, IR_EVENTOUT, 17_CH1,EVENTOUT | 62 | 3 | ||||||||
| PB10 | 2_SCL, CEC, 2_CH3, SYNC | 29 | 30 | ||||||||
| PB11 | 2_SDA, 2_CH4, G6_IO1, EVENTOUT | 30 | 31 | ||||||||
| PB12 | 2_NSS, 1_BKIN, G6_IO2, EVENTOUT | 33 | 32 | ||||||||
| PB13 | 2_SCK, 1_CH1N, G6_IO3 | 34 | 32 | ||||||||
| Setšoantšo sa MCU | Mosebetsi oa boto | ||||||||||
| Ka sehloohong tshebetso | Mesebetsi e meng | LQFP64 | Tobetsa konopo | LED | SWD | OSC | Mahala I/O | Matla phepelo | CN3 | P1 | P2 |
| PB14 | 2_MISO, 1_CH2N, 15_CH1, G6_IO4 | 35 | 31 | ||||||||
| PB15 | 2_MOSI, 1_CH3N, 15_CH1N, 15_CH2, RTC_REFIN | 36 | 30 | ||||||||
| PC0 | IN10, EVENTOUT | 8 | 11 | ||||||||
| PC1 | IN11, EVENTOUT | 9 | 12 | ||||||||
| PC2 | IN12, EVENTOUT | 10 | 13 | ||||||||
| PC3 | IN13, EVENTOUT | 11 | 14 | ||||||||
| PC4 | IN14, EVENTOUT | 24 | 25 | ||||||||
| PC5 | IN15, TSC_G3_IO1 | 25 | 26 | ||||||||
| PC6 | 3_CH1 | 37 | 29 | ||||||||
| PC7 | 3_CH2 | 38 | 28 | ||||||||
| PC8 | 3_CH3 | 39 | PUTSOA | 27 | |||||||
| PC9 | 3_CH4 | 40 | MONAHANA | 26 | |||||||
| PC10 | 51 | 15 | |||||||||
| PC11 | 52 | 14 | |||||||||
| PC12 | 53 | 13 | |||||||||
| PC13 | RTC_TAMP1, RTC_TS, RTC_OUT, WKUP2 | 2 | 4 | ||||||||
| Setšoantšo sa MCU | Mosebetsi oa boto | ||||||||||
| Ka sehloohong tshebetso | Mesebetsi e meng | LQFP64 | Tobetsa konopo | LED | SWD | OSC | Mahala I/O | Matla phepelo | CN3 | P1 | P2 |
| PC14- OSC32_ IN | OSC32_IN |
3 |
OSC32_IN | 5 | |||||||
| PC15- OSC32_ TSOA | OSC32_OUT | 4 | OSC32_OUT | 6 | |||||||
| PD2 | 3_ETR | 54 | 12 | ||||||||
| PF0- OSC_IN | OSC_IN |
5 |
OSC_IN | 7 | |||||||
| PF1- OSC_ TSOA | OSC_OUT |
6 |
OSC_OUT | 8 | |||||||
| PF4 | NTHAKO NTSANE | 18 | 19 | ||||||||
| PF5 | NTHAKO NTSANE | 19 | 20 | ||||||||
| PF6 | 2_SCL | 47 | 19 | ||||||||
| PF7 | 2_SDA | 48 | 18 | ||||||||
| VBAT | VBAT | 1 | 3 | ||||||||
| VDD_1 | 64 | ||||||||||
| VDD_2 | 32 | ||||||||||
| VDDA | 13 | ||||||||||
| VSS_1 | 63 | ||||||||||
| VSS_2 | 31 | ||||||||||
| VSSA | 12 | ||||||||||
| 5V | 1 | ||||||||||
| 3V | 1 | ||||||||||
| VDD | 5 | ||||||||||
| GND | 2 | 2 | |||||||||
| GND | GND | 3 | |||||||||
| Setšoantšo sa MCU | Mosebetsi oa boto | ||||||||||
| Ka sehloohong tshebetso | Mesebetsi e meng | LQFP64 | Tobetsa konopo | LED | SWD | OSC | Mahala I/O | Matla phepelo | CN3 | P1 | P2 |
| GND | 9 | ||||||||||
| GND | 33 | 33 | |||||||||
Ho kopanya li-module ho boto ea prototyping
Karolo ena e fana ka ba bang ba examplintlha tsa mokhoa oa ho hokahanya li-module tse seng li loketse ho sebelisoa tse fumanehang ho tsoa ho bahlahisi ba fapaneng ho ea ho STM32F0DISCOVERY kit ka boto ea prototyping e kenyellelitsoeng ka har'a khiti.
Software mohlalaamples, ho latela likhokahano tse hlalositsoeng ka tlase, li fumaneha ho www.st.com/stm32f0discovery.
Lisebelisoa tsa lisebelisoa tsa Microelektronica
Microelektronika, http://www.mikroe.com, e hlalositse lihokelo tse peli tse tloaelehileng bakeng sa liboto tsa tsona tsa lisebelisoa, tse bitsoang mikroBUS™ (http://www.mikroe.com/mikrobus_specs.pdf) le IDC10.
MikroBUS™ ke sehokelo sa li-pin tse 16 ho hokela liboto tsa lisebelisoa kapele le ha bonolo ho boto ea microcontroller ka likhokahano tsa SPI, UART kapa I2C, hammoho le liphini tse ling tse kang Analog Input, PWM le Interrupt. Sehlopha sa liboto tsa mikroElektronika tse tsamaellanang le mikroBUS™ li bitsoa "Click boards". IDC10 ke sehokelo sa 10-pin ho hokahanya sepheo se akaretsang sa I/O sa MCU ho liboto tse ling tsa lisebelisoa.
Litafole tse ka tlase ke tharollo e le 'ngoe ea ho hokahanya liboto tsa mikroBUS™ le IDC ho STM32F0DISCOVERY; tharollo ena e sebediswa ka fapaneng examples e fumaneha ho www.st.com/stm32f0discovery.
Lethathamo la 7. Ho hokela ho sebedisa microBUS™
| Microelektronica microBUS™ | TLHOKOMELISO EA STM32F0 | ||
| Pin | Tlhaloso | Pin | Tlhaloso |
| AN | Pin ea analog | PA4 | DAC1_OUT |
| RST | Hlahisa pinana | PB13 | GPIO OUTPUT (e mamella 5V) |
| CS | SPI Chip Khetha line | PA11 | GPIO OUTPUT (e mamella 5V) |
| TS'ELISO | Mohala oa oache oa SPI | PB3 | SPI1_SCK |
| MISO | SPI Slave Output line | PB4 | SPI1_MISO |
| MOSI | SPI Slave Input line | PB5 | SPI1_MOSI |
| PWM | Mola oa tlhahiso ea PWM | PA8 | TIM1_CH1 |
| INT | Hardware Interrupt line | PB12 | GPIO INPUT EXTI (e mamella 5V) |
| RX | UART Fumana mohala | PA3 | UART2_RX |
| TX | UART Transmit line | PA2 | UART2_TX |
| SCL | Mohala oa oache oa I2C | PF6 | I2C2_SCL |
| SDA | Lethathamo la lintlha tsa I2C | PF7 | I2C2_SDA |
| 5V | Mohala oa motlakase oa VCC 5V | 5V | Mohala oa motlakase |
Lethathamo la 8. Ho hokela ho sebelisa IDC10
| Microelektronica Tlhaloso: IDC10 sehokedi | TLHOKOMELISO EA STM32F0 | ||
| P0 | GPIO | PC0 | GPIO OUTPUT (e mamella 3.3V) |
| P1 | GPIO | PC1 | GPIO OUTPUT (e mamella 3.3V) |
| P2 | GPIO | PC2 | GPIO OUTPUT (e mamella 3.3V) |
| P3 | GPIO | PC3 | GPIO OUTPUT (e mamella 3.3V) |
| P4 | GPIO | PC4 | GPIO OUTPUT (e mamella 3.3V) |
| P5 | GPIO | PC5 | GPIO OUTPUT (e mamella 3.3V) |
| P6 | GPIO | PC6 | GPIO OUTPUT (e mamella 5V) |
| P7 | GPIO | PC7 | GPIO OUTPUT (e mamella 5V) |
| VCC | Mohala oa motlakase oa VCC 5V | 3V | VDD |
| GND | Sebaka sa Litšupiso | GND | VSS |
| P0 | GPIO | PC0 | GPIO OUTPUT (e mamella 3.3V) |
| P1 | GPIO | PC1 | GPIO OUTPUT (e mamella 3.3V) |
| P2 | GPIO | PC2 | GPIO OUTPUT (e mamella 3.3V) |
| P3 | GPIO | PC3 | GPIO OUTPUT (e mamella 3.3V) |
Setšoantšo sa 10 se bontša likhokahano lipakeng tsa STM32F0 Discovery le lihokelo tse 2, IDC10 le mikroBUS™.
ST MEMS "liboto tsa adapter", socket e tloaelehileng ea DIL24
STMicroelectronics e hlalositse sehokelo se tloaelehileng sa DIL24 ho lekola habonolo li-sensor tsa eona tsa MEMS tse hokahantsoeng le microcontroller ka likhokahano tsa SPI kapa I2C. Letlapa la 9 ke tharollo e le 'ngoe bakeng sa ho hokahanya liboto tsa DIL24 ho STM32F0DISCOVERY, tharollo ena e sebelisoa ho examples le fumaneha ho www.st.com/stm32f0discovery.
Lethathamo la 9. Ho hokahana le boto ea DIL24
| ST MEMS DIL24 Eval board | TLHOKOMELISO EA STM32F0 | ||
| P01 | Phepelo ea motlakase ea VDD | 3V | VDD |
| P02 | Vdd_IO Phepelo ea motlakase bakeng sa li-pin tsa I/O | 3V | VDD |
| P03 | NC | ||
| P04 | NC | ||
| P05 | NC | ||
| P06 | NC | ||
| P07 | NC | ||
| P08 | NC | ||
| P09 | NC | ||
| P10 | NC | ||
| P11 | NC | ||
| P12 | NC | ||
| P13 | Phepelo ea GND 0V | GND | GND |
| P14 | INT1 Khatiso e sa fetoheng 1 | PB12 | GPIO INPUT EXTI (e mamella 5V) |
| P15 | INT2 ho kena-kenana le tšitiso ea 2 | PB11 | GPIO INPUT EXTI (e mamella 5V) |
| P16 | NC | ||
| P17 | NC | ||
| P18 | NC | ||
| P19 | CS – 0:SPI e nolofaditse 1: mokgwa wa I2C | PA11 | GPIO OUTPUT (e mamella 5V) |
| P20 | SCL (I2C serial clock) SPC (SPI serial clock) | PB6 PB3 | I2C1_SCL SPI1_SCK |
| P21 | SDA I2C Serial Data SDI SPI Serial Data Input | PB7 PB5 | I2C1_SDA SPI1_MOSI |
| P22 | SDO SPI Serial Data Output I2C e nyane haholo ea aterese ea sesebelisoa | PB4 | SPI1_MISO |
| P23 | NC | ||
| P24 | NC | ||
Setšoantšo sa 11 se bontša likhokahano lipakeng tsa Discovery ea STM32F0 le sokete ea DIL24.
Liboto tsa adaptara tsa MEMS tse tšehelitsoeng
Lethathamo la 10 ke lethathamo la liboto tsa li-adapter tsa MEMS tse tšehelitsoeng ho tloha ka Mmesa, 2012.
Lethathamo la 10. Liboto tsa adaptara tsa MEMS tse tšehelitsoeng
| ST MEMS DIL24 Eval Board | Sehlahisoa sa mantlha |
| STEVAL-MKI009V1 | LIS3LV02DL |
| STEVAL-MKI013V1 | LIS302DL |
| STEVAL-MKI015V1 | LIS344ALH |
| STEVAL-MKI082V1 | LPY4150AL |
| STEVAL-MKI083V1 | LPY450AL |
| STEVAL-MKI084V1 | LPY430AL |
| STEVAL-MKI085V1 | LPY410AL |
| STEVAL-MKI086V1 | LPY403AL |
| STEVAL-MKI087V1 | LIS331DL |
| STEVAL-MKI088V1 | LIS33DE |
| STEVAL-MKI089V1 | LIS331DLH |
| STEVAL-MKI090V1 | LIS331DLF |
| STEVAL-MKI091V1 | LIS331DLM |
| STEVAL-MKI092V1 | LIS331HH |
| STEVAL-MKI095V1 | LPR4150AL |
| STEVAL-MKI096V1 | LPR450AL |
| STEVAL-MKI097V1 | LPR430AL |
| STEVAL-MKI098V1 | LPR410AL |
| STEVAL-MKI099V1 | LPR403AL |
| STEVAL-MKI105V1 | LIS3DH |
| STEVAL-MKI106V1 | Setšoantšo sa LSM303DLHC |
| STEVAL-MKI107V1 | L3G4200D |
| STEVAL-MKI107V2 | L3GD20 |
| STEVAL-MKI108V1 | 9AXISMODULE v1 [LSM303DLHC + L3G4200D] |
| STEVAL-MKI108V2 | 9AXISMODULE v2 [LSM303DLHC + L3GD20] |
| STEVAL-MKI110V1 | AIS328DQ |
| STEVAL-MKI113V1 | Setšoantšo sa LSM303DLM |
| STEVAL-MKI114V1 | MAG PROBE (e thehiloeng ho LSM303DLHC) |
| STEVAL-MKI120V1 | LPS331AP |
| STEVAL-MKI122V1 | Setšoantšo sa LSM330DLC |
| STEVAL-MKI123V1 | LSM330D |
| STEVAL-MKI124V1 | 10AXISMODULE [LSM303DLHC + L3GD20+ LPS331AP] |
| STEVAL-MKI125V1 | A3G4250D |
Hlokomela: Bakeng sa lenane la morao-rao, etela http://www.st.com/internet/evalboard/subclass/1116.jsp. Liboto tsa DIL24 li hlalosoa e le "liboto tsa adapter" tšimong "Tlhaloso e Akaretsang".
Arduino thebe mapolanka
Arduino™ ke sethala sa prototyping sa lisebelisoa tsa elektroniki se bulehileng se ipapisitse le lisebelisoa tse bonolo, tse sebelisoang habonolo le software. Bona http://www.arduino.cc bakeng sa lintlha tse ling. Mapolanka a lisebelisoa tsa Arduino a bitsoa "Shields" 'me a ka hokahanngoa habonolo le STM32F0 Discovery ho latela tafole e latelang.
Lethathamo la 11. Ho hokahana le lithebe tsa Arduino
| Ho hokahana le lithebe tsa Arduino | |||
| Sehokelo sa matla sa Arduino | TLHOKOMELISO EA STM32F0 | ||
| Seta bocha | Seta bocha ho tsoa ho Shield board | NRST | Seta hape ho sibolloa |
| 3V3 | Mohala oa motlakase oa VCC 3.3V | 3V | VDD |
| 5V | Mohala oa motlakase oa VCC 5V | 5V | VDD |
| GND | Sebaka sa Litšupiso | GND | Sebaka sa Litšupiso |
| GND | Sebaka sa Litšupiso | GND | Sebaka sa Litšupiso |
| Vin | Phepo ya ka ntle | VBAT | Jumper ho lekana |
| Analog ea Arduino ka sehokelo | TLHOKOMELISO EA STM32F0 | ||
| A0 | Ho kenya Analog kapa Digital pin 14 | PC0 | ADC_IN10 |
| A1 | Ho kenya Analog kapa Digital pin 15 | PC1 | ADC_IN11 |
| A2 | Ho kenya Analog kapa Digital pin 16 | PC2 | ADC_IN12 |
| A3 | Ho kenya Analog kapa Digital pin 17 | PC3 | ADC_IN13 |
| A4 | Ho kenya Analog kapa SDA kapa Digital pin 18 | PC4 kapa PF7 | ADC_IN14 kapa I2C2_SDA |
| A5 | Ho kenya Analog kapa SCL kapa Digital pin 19 | PC5 kapa PF6 | ADC_IN15 kapa I2C2_SCL |
| Sehokelo sa dijithale sa Arduino | TLHOKOMELISO EA STM32F0 | ||
| D0 | Digital pin 0 kapa RX | PA3 | UART2_RX |
| D1 | Digital pin 1 kapa TX | PA2 | UART2_TX |
| D2 | Digital pin 2 / Khatiso ea kantle | PB12 | EXTI (e mamella 5V) |
| D3 | Digital pin 3 / Ext int kapa PWM | PB11 | EXTI (e mamella 5V) kapa TIM2_CH4 |
| D4 | Digital pin 4 | PA7 | GPIO (3V e mamellang) |
| D5 | Digital pin 5 kapa PWM | PB9 | TIM17_CH1 |
| D6 | Digital pin 6 kapa PWM | PB8 | TIM16_CH1 |
| D7 | Digital pin 7 | PA6 | GPIO (3V e mamellang) |
| D8 | Digital pin 8 | PA5 | GPIO (3V e mamellang) |
| D9 | Digital pin 9 kapa PWM | PA4 | TIM14_CH1 |
| D10 | Digital pin 10 kapa CS kapa PWM | PA11 | TIM1_CH4 |
| D11 | Digital pin 11 kapa MOSI kapa PWM | PB5 | SPI1_MOSI kapa TIM3_CH2 |
| D12 | Digital pin 12 kapa MISO | PB4 | SPI1_MISO |
| D13 | Digital pin 13 kapa SCK | PB3 | SPI1_SCK |
| GND | Sebaka sa Litšupiso | GND | Sebaka sa Litšupiso |
| AREF | ADC voltage referense | NC | Ha e kopane |
| Ho hokahana le lithebe tsa Arduino (tsoela pele) | |||
| Sehokelo sa Arduino ICSP | TLHOKOMELISO EA STM32F0 | ||
| 1 | MISO | PB4 | SPI1_MISO |
| 2 | Tlhaloso: VCC 3.3V | 3V | VDD |
| 3 | TS'ELISO | PB3 | SPI1_SCK |
| 4 | MOSI | PB5 | SPI1_MOSI |
| 5 | RST | NRST | Seta hape ho sibolloa |
| 6 | GND | GND | Sebaka sa Litšupiso |
Setšoantšo sa 12 se bontša likhokahano pakeng tsa Discovery ea STM32F0 le mapolanka a thebe ea Arduino.
Ho taka
Merero ea motlakase
Nalane ea ntlafatso
Lethathamo la 12. Nalane ea ntlafatso ea litokomane
| Letsatsi | Khatiso | Liphetoho |
| 20-Mar-2012 | 1 | Tokollo ea pele. |
| 30-May-2012 | 2 | E kentsoe Karolo ea 5: Ho hokela li-module ho boto ea prototyping leqepheng la 27. |
Ka kopo Bala ka hloko:
Lintlha tse tokomaneng ena li fanoe feela mabapi le lihlahisoa tsa ST. STMicroelectronics NV le litšehetso tsa eona ("ST") li na le tokelo ea ho etsa liphetoho, litokiso, lintlafatso kapa lintlafatso tokomaneng ena, le lihlahisoa le lits'ebeletso tse hlalositsoeng mona ka nako efe kapa efe, ntle le tsebiso. Lihlahisoa tsohle tsa ST li rekisoa ho latela melao le maemo a thekiso ea ST. Bareki ke bona feela ba ikarabellang bakeng sa khetho, khetho le tšebeliso ea lihlahisoa le litšebeletso tsa ST tse hlalositsoeng mona, 'me ST ha e nke boikarabelo leha e le bofe bo amanang le khetho, khetho kapa tšebeliso ea lihlahisoa le litšebeletso tsa ST tse hlalositsoeng mona. Ha ho laesense, e boletsoeng kapa e boletsoeng, ka estoppel kapa ka tsela e 'ngoe, ho litokelo life kapa life tsa thepa ea mahlale tse fanoeng tlasa tokomane ena. Haeba karolo efe kapa efe ea tokomane ena e bua ka lihlahisoa kapa litšebeletso tsa motho oa boraro e ke ke ea nkuoa e le tumello ea tumello ea ST bakeng sa tšebeliso ea lihlahisoa kapa litšebeletso tsa motho oa boraro, kapa thepa efe kapa efe ea mahlale e teng ho eona kapa e nkuoang e le tiisetso e koahelang ts'ebeliso. mokhoa ofe kapa ofe oa lihlahisoa kapa litšebeletso tsa motho oa boraro kapa thepa efe kapa efe ea bohlale e teng ho eona.
NTLE LE HO HLAKGWE HO BEITSWE KA MELAO LE MAEMO A ST'S SALE ST E HLOKOMELA TIISETSO EFE KAPA E POTSOANG KAPA E FIHLENG HO HLOMPHA TŠEBELETSO LE/GOTSA THEKISO YA LIHLAHISO TSA ST HO kenyeletswa ntle le moedi wa ditiisetso tse kenyeleditsweng tsa MERCHANTABILITY MELAO EA MAELAO A MANG KAPA MONG), KAPA TLOKO EA LINTHO TSE LING TSA PATENT, TOKA EA KOPI KAPA TSE LING TSA TOKELO EA TLHOKOMELISO EA TLHOKOMELISO. NTLE HA E DUMELLE KA HO NGOLWA KE BAEMELI BA BABELI BA TUMELENG BA ST, LIHLAHISO TSA ST HA LI ARELETSOE, HA LI DUMELETSOA KAPA HO SEBELISA HO SEBELISA SESOLE, MOSEBETSI OA MOEA, SEBAKA, HO BOLOKA BOPHELO, KAPA LITSELA TSA TS'EPISO TSA BOPHELO. E KA ETSAHALA HO LENYATSA, LEFU, KAPA THOPELO E TEI KAPA TŠENYETSO EA TIKOLOHO. LITLHAHISO TSA ST TSE SA HLAHANG E LE “KARETE YA MOSEBETSI” LI KA SEBEDISWA FEELA LIKOPONG TSA MOSEBETSI KA KOTSI EA MOSEBETSI.
Ho rekisoa ha lihlahisoa tsa ST ka litokisetso tse fapaneng le lipolelo le / kapa likarolo tsa tekheniki tse boletsoeng tokomaneng ena li tla hlakola hang-hang tiisetso leha e le efe e fanoeng ke ST bakeng sa sehlahisoa kapa tšebeletso ea ST e hlalositsoeng mona 'me e ke ke ea theha kapa ea atolosa ka mokhoa ofe kapa ofe, molato leha e le ofe. ST.
ST le logo ea ST ke matšoao a khoebo kapa matšoao a ngolisitsoeng a ST linaheng tse fapaneng. Lintlha tse tokomaneng ena li nka sebaka le ho nkela tlhahisoleseling eohle e fanoeng pele. Letšoao la ST ke letšoao la khoebo le ngolisitsoeng la STMicroelectronics. Mabitso a mang kaofela ke thepa ea beng ba ona.
© 2012 STMicroelectronics – Litokelo tsohle li sirelelitsoe
Sehlopha sa lik'hamphani tsa STMicroelectronics
Australia – Belgium – Brazil – Canada – China – Czech Republic – Finland – France – Germany – Hong Kong – India – Israel – Italy – Japan – Malaysia – Malta – Morocco – Philippines – Singapore – Spain – Sweden – Switzerland – United Kingdom – United Linaha tsa Amerika
Litokomane / Lisebelisoa
 |
STMICROELECTRONICS STM32F0DISCOVERY Kit ea ho sibolla [pdf] Bukana ea Mosebelisi STM32F0DISCOVERY Discovery kit, STM32F0DISCOVERY, Discovery kit, khiti |