Smarteck BT-233 UHF Wireless Microphone System

Lenane la lihlahisoa

• Moamoheli x1
• Mic x2 e tšoaroang ka letsoho
• Cable ea Audio x1
• Adapter ea Matla x1
• 1.5V AA Betri x4
• Buka ea tataiso x1

Ha sehlahisoa se ntse se ntlafatsa kamehla. ha ho na ho ba le tsebiso e 'ngoe bakeng sa ba ntlafatsang. Rea leboha ka ho reka letoto la rona le letle la maekerofounu e se nang mohala Dihlahiswa pele o sebedisa dihlahiswa tsa rona ka kopo bala Bukana ya Mong wa yona hore o tle o e natefele.

LIKAROLOANA

• Adopt UHF high band, e nang le tšitiso e fokolang le phetisetso e tšepahalang haholoanyane.
• Adopt multi-channel frequency synthesis technology, e fana ka likanale tse fetang 200 habonolo ho qoba litšitiso tsa mefuta eohle ha lihlopha tse ngata li sebelisana hammoho ka nako e le 'ngoe.
• Ka tekhenoloji e tsoetseng pele ea frequency ea othomathike, leha frequency ea transmitter le ea moamoheli e fetotsoe, o ka khona ho lokisa frequency hore e tsamaisane le moamoheli ka ho tobetsa konopo.
• Ts'ebetso ea senotlolo, qoba tšebeliso e mpe.
• Sensitivity e ka fetoha, 'me anti-tšitiso ea ntlafala.
• Pontšo ea LCD e bonolo haholoanyane.

MOAMOHELO LIEKETSENG

1. HO FETOLA MATLA: Tobetsa konopo matla a ho bulela kapa ho tima.
2. Setšoantšo sa LCD: Hlahisa boemo ba hona joale ba ho sebetsa ba moamoheli.
3. Konopo ea UP(..&.)
4. Konopo(T)
5. Konopo ea IR(SET)
6. IR Sync Port
7. ANTENNA YA THELEKOPO: E amohela matshwao ho tswa ho transmitter.
8. HO HLAHALA HO LEKANETSO: Hlahisa lets'oao la molumo ka thoko ho hokela ampmoqhobi.
9. MOSEBETSI OA MOSEBETSI: Hlahisa matshwao a medumo bakeng sa kgokelo ho amplifiers.
10. KENYETSO EA MATLA: E amohela matla a tsoang ho adaptara ea DC e fanoeng.

HO BATLE PHOSO

Haeba yuniti e hloleha ho sebetsa ka mokhoa o tloaelehileng, hlahloba lintlha tse latelang ho fumana hore na phoso e ka lokisoa ka mehato e bonolo e hlahisitsoeng. Haeba e ke ke ea lokisoa, kapa haeba phoso e sa thathamisoa kholomong ea PROBLEM, khaola thapo ea motlakase 'me u ikopanye le morekisi ea lumelletsoeng kapa setsi sa litšebeletso bakeng sa thuso.

POLOKO

Tlhokomelo le tlhokomelo

Beha mochini hole le dampness, masimo a electromagnetic, le mocheso o phahameng. Le ka mohla u se ke ua li beha letsatsing le tobileng. Ntša ka har'a libeteri tsa transmitter 'me u lokolle terata ea motlakase ea mochine haeba u sa e sebelise nako e telele.

Ho hloekisa

Hula polaka, 'me u sebelise d hanyenyaneamp lesela ho hloekisa mochini. U se ke ua sebelisa lisebelisoa leha e le life tse hloekisang kapa li-solvents.

Tlhokomelo

Le ka mohla u se ke ua bula mochine u le mong ha mathata a hlaha, ka kopo ikopanye le botoro ea setereke sa sebakeng seo kapa u re letsetse ka ho toba, Re tla etsa sohle se matleng a rona!

Ho lokisa

Haeba li-unit li buloa ke bareki, tiisetso e fela.

Sistimi ea microphone e se nang mohala ea UHF

Tekheniki Parameter

• Marang-rang: UHF 620-950MHz
• Hangata Karabo: 40Hz-18KHz
• Maqhubu a tsitsitseng: ±0.005%
• Modulation Mode: Sehlopha se sephara sa FM
• Modulation Range: 25MHz
• Mananeo: 2×1 00CH
• Sebaka sa Mosebetsi:60 M
• Sekheo sa Manane: 250 KHz
• Dynamic Range: 1dB
• Phapang e kholo: ±45KHz
• Karabo ea AF: 65Hz-15KHz (±3 dB)
• THD: <0.5%
• Audio Output Balance: 0-±500mV

Moamoheli

• Phepelo ea motlakase: AC 100-240V, 50/60Hz
• Matla a Sehlahisoa sa Adapter ea DC: 13-15V,500mA
• Tšebeliso ea Matla:5W
• Boemo ba S / N: > 98dB
• Karolelano ea P/N : > 80dB
• Karo-karolelano ea F/N:> 80dB
• Fumana Kutloisiso: 5dBu

Transmitter(Maekerofounu)

• Modulation Mode: FM
• Tunable Bandwidth: 50MHz
• Khafetsa Nako: 250KHz
• Phapang e kholo: ± 45kHz
• Harmonics Radiation: <-55dBc
• Matla a Transmitter: 1mW
• Battery Voltage: AA 1.5VX2
• Bophelo ba Battery: Lihora tse 5

MOSEBETSI SELELE

1. Grille
2. LCD
3. Phetoho ea matla
4. Likopano tsa IR
5. Sekoaelo sa betri
6. Lebokose la betri
7. Antenna

TS'EBELETSO EA MICROPHONE EA LETSOHO

1. Bulela matla a transmitter, LCD e tla khantša ebe e bonts'a mocha oa hajoale le matla a betri.
2. Ha u batla ho fetola mocha kapa maqhubu, u lokela ho fetola mochine pele, ebe u nka transmitter e lebisitseng fensetereng ea infrared, tobetsa konopo ea "SET", 'me maqhubu a tla amahanngoa le li-transmitters.

TS'EBETSO MOAMOHELO

1. Fetola molumo hore o be o monyenyane pele o bulela mochine o fetisang molaetsa, ebe o bulela mochine o amohelang molaetsa, LCD e khantša 'me alphanumeric e hlahisoa, ebe LCD e tla bontša mocha le maqhubu a moamoheli, tobetsa konopo ea SET e ka fetola boemo.
2. Ha transmitter e tima, o lokela ho shebella boemo ba RF le AF, haeba ho hlaha tšitiso e matla, fetola mocha ho qoba ntlha ea tšitiso.
3. Bulela transmitter, meter ea boemo ba RF e bonesa, 'me u fetole molumo oa thepa, bua, mitha ea boemo ba AF ea moamoheli e khantša ha ho se na molumo kapa mabone a methara ea boemo ha a khanye, ho bontša hore sistimi. e sa tloaeleha 'me e lokela ho hlokomeloa.
4. Tobetsa konopo ea POWER ho tima moamoheli.

LCD ea moamoheli

1. ponts'o ea boemo bakeng sa moamoheli oa lets'oao la RF "RF".
2. pontsho ya boemo bakeng sa letshwao la modumo la moamohedi “AF”.
3. Ho sebelisa pontšo ea maqhubu.
4. Ho sebelisa pontšo ea Channel.

TŠEBELETSO MENU LCD

1. Notlela Skrine sa Pontsho
   Khabareng. tobetsa konopo ea UP ( ) le konopo ea DOWN ( ), ebe skrine ea moamoheli e tla notleloa, Ts'ebetso e tšoanang ke ho lokolla senotlolo.
2. Ho laola molumo
   Tobetsa konopo ea UP ( ) le konopo ea DOWN ( ), mme molumo oa sesebelisoa oa eketseha kapa oa fokotseha.
3. Fetola Maqhubu
   LonQ tobetsa konopo " ” konopo, 'me palo ea khafetsa e tla fofa, u ka sebelisa UP( ) “kapa “TLASE ( )” ho lokisa maqhubu a loketseng, ebe o tobetsa konopo ea “SET' ho netefatsa. Ho na le maqhubu a 100 bakeng sa kanale ka 'ngoe ea moamoheli, 'me u ka khona ho fetola maqhubu ka letsoho. CH A can 1-100 dikanale ho lokisa CH B ka 101-200 dikanale ho fetola
4. IR Kamahanyo
   Tobetsa konopo e bohareng "SET", 'me LCD "IR--", ka metsotsoana e 3-5, IR e ho LCD e tla penya ebe e beha boema-kepe ba IR ba li-transmitter ho leba IR Sync Port ea moamoheli, u tla qeta. ho romela leqhubu ho sefetisi.
5. Skena Mosebetsi
   Tobetsa nako e telele konopo ea "SET" 'me LCD e tla hlahisa "SCAN", maqhubu a LCD a tla phalla,' me moamoheli o tla hlahloba le ho khetha maqhubu a hloekileng. Kamora ho qeta ho skena, ka kopo sebelisa li-transmitters le moamoheli ho etsa tšebetso ea kamahanyo ea IR.

Litokomane / Lisebelisoa

Smarteck BT-233 UHF Wireless Microphone System [pdf] Bukana ea Mosebelisi BT-233 UHF Wireless Microphone System, BT-233, UHF Wireless Microphone System, Wireless Microphone System, Microphone System

Litšupiso

• Bukana ea Mosebelisi