Litaelo tsa ho Hloma
Mohlala oa GCM-8
Graphics Control Module
LIEKETSENG
Model GCM-8 Graphics Control Module ho tsoa ho Siemens Industry, Inc. ke mojule o fumanehang hole. E fana ka liphetho tse mashome a mabeli a metso e mene ho khanna lipara tse robeli tsa LED. Para e 'ngoe le e 'ngoe e na le bicolor e le 'ngoe (e khubelu / e tala) le LED e le' ngoe e mosehla. E boetse e fana ka lintlha tse robeli tsa ho hokela ho li-switches tsa nakoana tsa kantle. Mesebetsi ea li-switches le li-LED li hlophisitsoe ka ho kenya SCM-8 ho Sesebelisoa sa Zeus (Sheba Tataiso ea Qalo e Potlakileng ea Zeus, P/N 315-033875). Li-LED kaofela li ka hlophisoa hore li ON, OFF kapa FLASHING.
GCM-8 e sebelisetsoa ho laola tsamaiso ea mollo ka letsoho.
Ho na le kenyeletso e eketsehileng bakeng sa nakoana lamp teko.
TS'EBETSO
GCM-8 e hokahana le li-switches tse robeli le lipara tse robeli tsa LED. Sesebelisoa se seng le se seng se amahanngoa le li-LED tse peli.
Ho tobetsa leha e le efe ea li-switches tse robeli ho hlahisa molaetsa o ikhethang oa CAN beseng ho ea ho NIC-C kapa DAC-NET e bontšang hore na ke switch efe e hatisitsoeng. Molaetsa oa CAN o tsoang ho NIC-C kapa DAC-NET ho ea ho GCM-8 o hlahisa tlhahiso e reriloeng esale pele ho LED e tsamaellanang (ON, FLASHING kapa OFF). Ho fanoa ka 'mokelli ea bulehileng bakeng sa ho hokahanya le CAN Sounder Board (CSB), module e arohaneng ea molumo. CSB e fana ka maikutlo a utloahalang ho bontša hore sesebelisoa se koetsoe hantle le hore puisano pakeng tsa GCM-8 le NIC-C kapa DAC-NET e atlehile. Sheba Litaelo tsa Tlhophiso ea CSB, P/N 315-033040, bakeng sa tlhaiso-leseling e batsi.
Ka ho khutsufatsa li-terminals 1 le 2 tsa TB1, li-LED kaofela li tla bulela ho netefatsa hore lia sebetsa 'me li tla khutlela boemong ba tsona bo tloaelehileng ka mor'a metsotsoana e seng mekae. The lamp test switch on multiple GCM-8s e ka hokeloa ho switch e le 'ngoe.
LIEKETSENG PELE
Beha aterese ea boto bakeng sa GCM-8 ka 'ngoe u sebelisa li-switches tsa rotary tse nang le maemo a leshome (S1 le S2) tse holim'a boto (Sheba setšoantšo sa 1). Aterese e tlameha ho ba aterese e nyenyane ea NIC-C kapa DAC-NET 'me e lokela ho tšoana le liaterese tse fanoeng ho Zeus Programming Tool. Ho seta aterese, retelletsa lisupa ho e 'ngoe le e 'ngoe ea ho daela ho linomoro tsa aterese e khethiloeng. Bakeng sa mohlalaample, haeba aterese e le 12, seta sesupo sa ho daela TENS (S1) ho "1" ebe u seta sesupa sa ONES (S2) ho "2".
Letoto la liaterese tse lumelletsoeng ke ho tloha ho 01 ho isa ho 99 (ho tlameha ho sebelisoa li-zero tse etellang pele).
KEKETSO
GCM-8 e kanna ea kengoa ho REMBOX. Ha u sebelisa REMBOX 2 kapa 4, kenya GCM-8 sebakeng sa mojule o le mong ho REMBOX2-MP, P/N 500-634211 kapa REMBOX4-MP, P/N 500-634212 u sebelisa likurufu tse 'ne tse fanoeng. (Sheba Litaelo tsa Tlhophiso ea REMBOX2-MP/REMBOX4MP, P/N 315-034211.) Ho fihla ho 4 GCM-8s e tla kena ho REMBOX2; ho fihla ho 8 GCM-8s e tla lekana ho REMBOX4.
KHOPO
Tlosa matla ohle a sistimi pele o kenya, pele betri ebe AC. (Ho matlafatsa, hokela AC pele, ebe e ntan'o ba betri.)
- Mojule ka mong oa GCM-8 ke node beseng ea CAN.
- GCM-8 e ka kenngoa ka RNI kapa ntle le eona. Hokela bese ea 24V le CAN joalo ka ha ho bontšitsoe setšoantšong sa 2.
- Ho fihla ho li-module tsa CAN tse 99, ka motsoako ofe kapa ofe, li ka hokeloa ho bese ea CAN ea NIC-C ka 'ngoe kapa DAC-NET.
- Mojule ka mong oa GCM-8 o romelloa ka thapo e le 'ngoe ea CCS.
- Mahokelo a lithapo bakeng sa li-module tsa GCM-8 a bonts'oa tafoleng e latelang:
GCM-8 LIKHOKELO TSA KHABELE
| Cable | Tlhaloso | Nomoro ea Karolo | Khokahano |
| CCL | CAN-CABLE-Long 30 in., 6-conductor | 599-634214 | E hokela P4 ho RNI ho GCM-8 ea pele. E boetse e hokela ho tloha GCM-8 ho isa P3 ho CC-5/CC-2. |
| CCS | KA-CABLE-Short 5% in., 6-conductor | 555-133539 | E hokela li-module tsa GCM-8 ho GCM-8, OCM-16 kapa SIM-16 modules ka tatellano e le 'ngoe. |
Bese ea CAN e hloka khanyetso ea 120S pheletsong e 'ngoe le e 'ngoe ea lupu. Sheba Litaelo tsa Tlhophiso ea NIC-C, P/N 315-033240 bakeng sa lintlha tse mabapi le ho felisoa ha CAN.
- Lihokelo ho J2 li bonts'itsoe lethathamong le latelang:
LIKELETSO J2
| POS | Khethollo | POS | Khethollo |
| 1 | Bicolor - TLHOKOMELISO1 | 2 | Bicolor - RED1 |
| 3 | Bicolor - TLHOKOMELISO2 | 4 | Bicolor - RED2 |
| 5 | Bicolor - TLHOKOMELISO3 | 6 | Bicolor - RED3 |
| 7 | Bicolor - TLHOKOMELISO4 | 8 | Bicolor - RED4 |
| 9 | Li-bicolor - tse tala | 10 | Bicolor - REDS |
| 11 | Bicolor - TLHOKOMELISO6 | 12 | Bicolor - RED6 |
| 13 | Bicolor - TLHOKOMELISO7 | 14 | Bicolor - RED7 |
| 15 | Bicolor - TLHOKOMELISO8 | 16 | Bicolor - RED8 |
| 17 | MOSEBETSI1 | 18 | MOSEBETSI2 |
| 19 | MOSEBETSI3 | 20 | MOSEBETSI4 |
| 21 | TŠEHLA | 22 | MOSEBETSI6 |
| 23 | MOSEBETSI7 | 24 | MOSEBETSI8 |
| 25 | FETOHA1 | 26 | FETOHA2 |
| 27 | FETOHA3 | 28 | FETOHA4 |
| 29 | PHETOHO | 30 | FETOHA6 |
| 31 | FETOHA7 | 32 | FETOHA8 |
| 33 | LED TLOAELEHI | 34 | FETOHA 5V MATLA |
GCM-8 e na le 2.7K e fokotsang lihanyetsi bakeng sa li-LED tsa Yellow1 ho ea ho Yellow8. Lisebelisoa tse fokotsang tsa 2.7K bakeng sa li-LED tsa bicolor li tlameha ho fanoa ke Sehlopha sa External Graphics.
LINTLHA TSEO
- Lithapo tsohle li tlameha ho tsamaellana le Article 760 ea NEC kapa likhoutu tsa meaho ea lehae.
- Lipotoloho tsohle li na le matla a fokolang ka sengoloa sa 760 sa NEC.
- Litekanyetso tsa Motlakase: Hona joale e emeng: 14mA max. @ 24VDC Hona joale e sebetsang: 200mA max. @24VDC
- Bakeng sa tlhahisoleseling e eketsehileng, sheba Litaelo tsa Tlhophiso ea NIC-C, P/N 315033240.
- Lamp switch switch e tlameha ho ba lisebelisoa tse thathamisitsoeng tsa UL 864.
- CAN marangrang max. ho hanyetsa line 15S.
- Thaba ea Lamp Teko monyako o ka pele oa REMBOX2/4.
- P1 le J1 ke tsa tšebeliso ea lifeme feela.
* BAKENG SA KHOPO LE GEOGRAPHICS GEO PANEL, LOKELA PIN 1 HO J2 KA PIN E TŠOETSOENG P1, 1 HO GEO PANEL.
LITEKANYETSO TSA MOTSI
| 24V Back Plane ea Hona joale | 0 |
| 24V Screw Terminal ea Hona joale | 15mA + 5mA ka LED e sebetsang |
| 6.2V Back Plane ea Hona joale | 0 |
| 24V Standby Hona Joale | 15mA + 5mA ka LED e sebetsang |
| Matla a Output | |
| CAN Network Pair | 8V e phahameng ka ho fetisisa. |
| 75mA, max. (nakong ya phetiso ya msg) |
|
Khoebo ea Siemens, Inc.
Building Technologies Division
Florham Park, NJ
Siemens Canada Limited
Building Technologies Division
2 Kenview Boulevard
Brampton, Ontario L6T 5E4 Canada
firealarmresources.com
Litokomane / Lisebelisoa
 |
SIEMENS GCM-8 Graphics Control module [pdf] Buka ea Taelo GCM-8, GCM-8 Graphics Control Module, Graphics Control Module, Control Module, Mojule |
