Sensata ISOSLICE-7 Digital Input Pulse Counting kapa 2 Frequency Input Slice Unit

Leha ho entsoe boiteko bo bong le bo bong ho netefatsa bonnete ba tokomane ena, ha re amohele boikarabello bakeng sa tšenyo, kotsi, tahlehelo, kapa litšenyehelo tse bakoang ke liphoso kapa ho siuoa, 'me re na le tokelo ea ho e lokisa ntle le tsebiso. Tokomane ena e kanna ea se hlahisoe ka tsela efe kapa efe ntle le tumello e ngotsoeng pele ea k'hamphani

ISOSLICE-7

Yuniti ea ISOSLICE-7 e na le kenyeletso e le 'ngoe ea dijithale bakeng sa ho bala likhahla kapa lisebelisoa tse 1 tsa dijithale tse sebelisetsoang ho metha maqhubu. Khetho e etsoa ho sebelisoa dip switch 2. Sheba karolo e mabapi le mokhoa oa ho kenya bakeng sa lintlha tse ling. Ka mokhoa oa ho bala pulse (dip switch 1 off) palo ea pulses e bolokoa joalo ka nomoro ea 1-bit, e phatlalalitsoeng ho feta liparamente tse 32 tse baloang ke E2 kapa Z-Port.

Paramethara 

1. Pulse input 1 high 16-bits
2. Pulse input 1 tlase 16-bits

Keketseho ea ho otla ha pelo e bolokoa ka metsotsoana e meng le e meng e 14, haeba matla a tima. Ka mokhoa oa ho lekanya khafetsa (dip switch 1 on) frequency e baloang ho tsoa ho tse 2 tsa dijithale e ka fokotsoa ho tloha ho e 'ngoe ea mekhahlelo e mene: 0 ho isa 10Hz, 100Hz, 1000Hz, 10000Hz. Sheba karolo ea calibration bakeng sa lintlha tse ling.

Paramethara 

1. Keketseho ea makhetlo a 3
2. Keketseho ea makhetlo a 5

Digital Inputs Link Fitting
Ho na le mefuta e 3 e fapaneng eo yuniti e ka e amohelang

Volt Free Contact
Kenyelletso ea dijithale ke optoisolator e tlamehang ho hokahanngoa le e tloaelehileng ho chencha "ON". Lihokelo tsa ho kenya li tlameha ho kenngoa maemong a holimo joalo ka:

+24V dc input kapa +5V dc TTL input
Kenyelletso ea dijithale ke optoisolator e tlamehang ho tsamaisoa kantle ke +24V dc kapa +5V dc ho terminal ea Input, e nang le Ground e tsamaisanang le terminal e tloaelehileng, ho bulela "ON". Lihokelo tsa ho kenya li tlameha ho kenngoa maemong a tlase joalo ka ona

Nomoro ea Channel
Nomoro ea kanale e etsoa ho sebelisoa 8-way dipswitch, switjha 2 ho isa ho 8. Haeba li-switches kaofela li tingoe, nomoro ea kanale ke 1 (ha e sebetse, e bonts'itsoeng ke bofubelu bo benyang ba LED):

Ketso e Fetola Aterese 

• 8 eketsa 1
• 7 eketsa 2
• 6 eketsa 4
• 5 eketsa 8
• 4 eketsa 16
• 3 eketsa 32
• 2 eketsa 64

Li-Schitches Li-Stouch 1 = Buletsoe, 0 = E tima

• Channel
• 2 3 4 5 6 7 8 Channel 2 3 4 5 6 7 8
• 1 0 0 0 0 0 0 0 9 0 0 0 1 0 0
• 2 0 0 0 0 0 0 1 10 0 0 0 1 0 0
• 3 0 0 0 0 0 1 0 11 0 0 0 1 0 1
• 4 0 0 0 0 0 1 1 12 0 0 0 1 0 1
• 5 0 0 0 0 1 0 0 13 0 0 0 1 1 0
• 6 0 0 0 0 1 0 1 14 0 0 0 1 1 0
• 7 0 0 0 0 1 1 0 15 0 0 0 1 1 1
• 8 0 0 0 0 1 1 1 16 0 0 0 1 1 1

Mokhoa oa ho kenya
Switch 1 e sebelisoa ho khetha pakeng tsa mokhoa oa ho bala lerata le mokhoa oa ho kenya maqhubu.

Switch 1 Off
Pulse counting on input 1

Bulela 1:
Litlhahiso tsa khafetsa tse lekantsoeng ho tse kenyang 3 le 5 Ka mokhoa oa ho metha khafetsa yuniti e ka lekanya maqhubu leha e le afe pakeng tsa 0 & 10kHz e lekantsoeng ka mefuta e 4 ea maqhubu a khethiloeng (sheba karolo ea Calibration bakeng sa lintlha tse ling) Palo ea maqhubu a bolokoa le ho bolokoa ke yuniti ea ISOSLICE 7, kahoo ha matla a ka senyeha, palo ha e lahlehe. Palo e bolokoa ka lebelo le holimo hang ka metsotsoana e meng le e meng e 13.4, ho boloka bophelo ba mohopolo oa eona o sa fetoheng. Nako le nako ha to tal e bolokiloe, led e tala e tla tima hanyane.

Khutlisa Pulse Count Kakaretso
Palo eohle ea ho otla ha pelo e ka khutlisoa hape. Tšoara konopo ea ho phahamisa phanele e ka pele tlase metsotsoana e ka bang 15, ho fihlela LED e tala e tima. Tlosa konopo 'me palo ea pulse e tla be e setiloe bocha.

Lihokelo
Motlakase oa digital o entsoe ka tsela ena:

Khokahano ea mahala ea Volt:

+24/5V TTL Vdc Kenyeletso

• 12. Tloaelehileng
• 5. Kenyelletso 5 (kanale ea maqhubu 2)
• 6. 11. Tloaelehileng
• 1. Kenyeletso 1 (ho baloa ha molumo oa molumo feela)
• 2. 9. Tloaelehileng
• 3. Kenyelletso 3 (kanale ea maqhubu 1)
• 4. 10. Tloaelehileng

• 1 flash = 0 ho isa ho 10 Hz
• 2 khanya = 0 ho 100 Hz
• 3 khanya = 0 ho 1000 Hz
• 4 khanya = 0 ho 10000 Hz

Boemong ba ho matha, tobetsa 'me u lokolle konopo ea Phahamisa ho bona mofuta oa frequency channel 2 (input 5). LED e tla benya bofubelu. Bala makhetlo ao e phatsimang ka 'ona.

Ho fetola mefuta ea lintho tse kenang bakeng sa kanale 1 (kenyo 3)
Boemong ba ho matha, tobetsa konopo ea Lower 'me u e tšoare metsotsoana e 4, ho fihlela LED e fetoha ho tloha ho botala ho ea ho amber. Lokolla konopo ea Lower. Tobetsa 'me u lokolle konopo ea Phahamisa ho eketsa sekhahla sa maqhubu kapa Push le ho lokolla konopo ea Tlase ho fokotsa sekhahla sa maqhubu. LED e tla benya botala ka makhetlo a 1 ho isa ho a 4 ka mor'a ho tobetsa konopo, e bontšang mefuta e khethiloeng. Ha sebaka se hlokahalang se khethiloe, tobetsa likonopo ka bobeli ka nako e le 'ngoe ebe u lokolla. Amber LED e tla tima bakeng sa ¾ motsotsoana ebe e fetohela ho botala, ha sebaka se khethiloeng se bolokiloe 'me se khutlela ho sebetsa. Lebala le bolokoa ka nako ea potoloho ea matla.

Ho fetola mefuta ea lintho tse kenang bakeng sa kanale 2 (kenyo 5)
Ha u le matha, tobetsa konopo ea Phahamisa 'me ue tšoare metsotsoana e 4, ho fihlela LED e fetoha ho tloha ho botala ho ea ho khubelu. Lokolla konopo ea Phahamisa. Tobetsa 'me u lokolle konopo ea Phahamisa ho eketsa sekhahla sa maqhubu kapa Push le ho lokolla konopo ea Tlase ho fokotsa sekhahla sa maqhubu. LE D e tla benya botala ka makhetlo a 1 ho isa ho a 4 ka mor'a ho tobetsa konopo, e bontšang mefuta e khethiloeng. Ha sebaka se hlokahalang se khethiloe, tobetsa likonopo ka bobeli ka nako e le 'ngoe ebe u lokolla. LED e khubelu e tla tima ka metsotsoana e ¾ ebe e fetohela ho botala, ha sebaka se khethiloeng se bolokoa 'me se khutlela ho sebetsa. Lebala le bolokoa ka nako ea potoloho ea matla.

Sensata Technologies 6 220808

Litokomane / Lisebelisoa

Sensata ISOSLICE-7 Digital Input Pulse Counting kapa 2 Frequency Input Slice Unit [pdf] Bukana ea Mosebelisi ISOSLICE-7 Digital Input Pulse Counting kapa 2 Frequency Input Slice Unit, ISOSLICE-7, Digital Inpul Pulse Counting kapa 2 Frequency Input Slice Unit, Frequency Input Iso Units, Iso Slice Unit.

Litšupiso

• Bukana ea Mosebelisi