SEALEVEL DIO-32B ISA 16 Reed Relay Output 16 Isolated Input Digital Interface

Selelekela

Khokahano ea DIO-32B ea dijithale ea I/O e fana ka lintlha tse 16 tse ikhethileng le liphetho tse 16 tsa relay ea lehlaka. Lisebelisoa (tse lekantsoeng bakeng sa 3-13V) li sireletsa PC le lisebelisoa tse ling tse hlokolosi ho tloha ho li-spikes le fatše loop current e ka hlahisoang libakeng tsa indasteri, ha lihlahisoa li fana ka boleng bo phahameng, bophelo bo bolelele, tlaase (10 Watt maximum), ho kopana ho omileng. switjha ho koaloa. Li-relay tsa lehlaka li loketse lits'ebetso tse tlase hona joale. Hangata li-relay lia buleha le ho koaloa ha li matlafalitsoe. DIO-32B e etselitsoe ho sebelisoa le mefuta e fapaneng ea Ts'ebetso, ho kenyeletsoa Windows, Linux, le DOS. SeaI/O API (Application Programmer Interface) e kenyellelitsoeng ho software e fumanehang bakeng sa DIO-32B e fana ka mefuta e fapaneng ea mehala ea ts'ebetso ea boemo bo holimo e kentsoeng ts'ebetsong joalo ka laeborari ea lihokelo tsa Windows dynamic (DLL) hape joalo ka mojule oa kernel ea Linux le laeborari. Ho phaella ho API, SeaI / O e kenyelletsa sample khoutu le lisebelisoa ho nolofatsa nts'etsopele ea software.

Lihlahisoa tse ling tsa Sealevel ISA Digital I/O

Mohlala Che.	Karolo Che.	Tlhaloso
DIO-16	(P / N 3096)	– 8 Reed Relay Outputs / 8 Opto-Isolated Inputs
ISO-16	(P / N 3094)	– 16 Optically Isolated Inputs
REL-16	(P / N 3095)	– 16 Reed Relay Outputs
REL-32	(P / N 3098)	– 32 Fetoha Relay Outputs
PIO-48	(P / N 4030)	– 48 TTL Dikenyo/Diketso

Pele U Qala

Se Kenyellelitsoeng

DIO-32B e romelloa le lintho tse latelang. Haeba e 'ngoe ea lintho tsena e le sieo kapa e senyehile, ka kopo ikopanye le Sealevel bakeng sa e 'ngoe.

• Ntho # 3093 - DIO-32B ISA Adapter
• Ntho# CA111 – 6” Ribone Cable with IDC 20-Pin to DB-37 Male

Likopano tsa Keletso

Tlhokomediso
Boemo bo phahameng ka ho fetisisa ba bohlokoa bo sebelisetsoa ho hatisa boemo boo ho sona ho ka bakang tšenyo sehlahisoa, kapa mosebedisi a ka tsoa kotsi e mpe.

Bohlokoa
Boemo bo bohareng ba bohlokoa bo sebelisoa ho totobatsa lintlha tse ka 'nang tsa bonahala li sa hlaka kapa boemo bo ka etsang hore sehlahisoa se hlolehe.

Hlokomela
Boemo bo tlase ba bohlokoa bo sebelisoa ho fana ka lintlha tsa morao-rao, malebela a tlatsetso, kapa lintlha tse ling tse sa nyatseheng tse ke keng tsa ama tšebeliso ea sehlahisoa.

Lintho tseo u ka li khethang
Ho ipapisitse le ts'ebeliso ea hau, u kanna oa fumana e le 'ngoe kapa tse ling tsa lintho tse latelang li le bohlokoa bakeng sa ho hokahanya DIO-32B le matšoao a lefats'e la nnete. Lintho tsohle li ka rekoa ho rona websaete (www.sealevel.com) kapa ka ho letsa 864-843-4343.

DB-37 Male to DB-37 Female Extension Cable – (Ntho# CA112)
Cable ena e fana ka katoloso ea 6' ho CA165. E na le sehokelo se le seng sa DB37 Male le sehokelo se le seng sa DB37 sa basali.

DB-37 Thibelo ea Seteishene sa Monna/Mosali (Ntho# TB02-KT)
Hlōla likhokahano tsa serial le tsa dijithale ho screw li-terminals bakeng sa khokahanyo e bonolo ea lebala. The TB02 terminal block e entsoe ka lihokelo tsa DB37 tsa banna le basali, ka hona; e ka sebelisoa le boto efe kapa efe ea DB37 ho sa tsotelehe bong ba boto ea boema-kepe.

Thibelo ea Cable le Terminal Block Kit (Ntho# KT101)
KT101 e kenyelletsa block block ea TB02 le thapo ea CA112. Ho hokahanya ka botlalo DIO-32B lisebelisoa tse peli tsa KT101 li tla hlokahala.

Kemiso ea karete

DIO-32B e na le likhoele tse 'maloa tsa jumper tse lokelang ho hlophisoa bakeng sa ts'ebetso e nepahetseng.

Khetho ea Aterese
DIO-32B e nka libaka tse 4 tse latellanang tsa I/O. DIP-switch (SW1) e sebelisoa ho seta aterese ea mantlha ea libaka tsena. E-ba hlokolosi ha u khetha aterese ea motheo kaha likhetho tse ling li hanyetsana le likou tsa PC tse teng. Tafole e latelang e bontša tse 'maloa examphore seo hangata se seke sa baka kgohlano.

Aterese	Binary	Fetoha Litlhophiso
		1	2	3	4	5	6	7	8
100-104	01 0000 00xx	E tima	On	On	On	On	On	On	On
104-108	01 0000 01xx	E tima	On	On	On	On	On	On	E tima
200-204	10 0000 00xx	On	E tima	On	On	On	On	On	On
280-283	10 1000 00xx	E tima	On	E tima	On	On	On	On	On
284-287	10 1000 01xx	E tima	On	E tima	On	E tima	On	On	E tima
2EC-2EF	10 1110 11xx	E tima	On	E tima	E tima	E tima	On	E tima	E tima
300-303	11 0000 00xx	E tima	E tima	On	On	On	On	On	On
320-323	11 0010 00xx	E tima	E tima	On	On	E tima	On	On	On
388-38B	11 1000 10xx	E tima	E tima	E tima	On	On	On	E tima	On
3A0-3A3	11 1010 00xx	E tima	E tima	E tima	On	E tima	On	On	On
3A4-3A7	11 1010 01xx	E tima	E tima	E tima	On	E tima	On	On	E tima

Setshwantsho se latelang se bontsha kamano pakeng tsa disetting tsa DIP-switch le diaterese tse sebediswang ho fumana aterese ya motheo. Ka mohlalaample ka tlase, aterese ea 300 e khethiloe e le aterese ea motheo. Aterese 300 ho binary ke XX 11 0000 00XX moo X = karolo e sa khethoeng ea aterese le bonyane ba aterese A9 e lula e le 1.

Ho beha switjha 'Bule' kapa 'Ho koetsoe' ho tsamaisana le '0' atereseng ha u e siea 'Timme' kapa 'Bula' ho tsamaisana le '1'.

Sehlooho sa IRQ E2
Litšitiso li ka hlahisoa ke Port A, bit 0 ho ea tlase haeba e nolofalitsoe sebakeng sa jumper (E2). Lipontšo tsa likopo tse sitisang 2/9 ho isa ho 7 (IRQ 2/9 - 7) li ka khethoa ka ho beha jumper sebakeng se loketseng. Lisebelisoa tse ling e ka ba 'terata KAPA ed.' ho hlahisa le tshitiso ha o batloa. Ka kopo, sheba feme bakeng sa lintlha tse ling.

Ho kenya Software

Ho kenya Windows
Se ke oa kenya Adapter mochining ho fihlela software e kentsoe ka botlalo. Ke basebelisi feela ba sebetsang Windows 7 kapa ba bacha ba lokelang ho sebelisa litaelo tsena bakeng sa ho fumana le ho kenya mokhanni ea loketseng ka Sealevel's. websebaka. Haeba u sebelisa sistimi e sebetsang pele ho Windows 7, ka kopo ikopanye le Sealevel ka ho letsetsa 864.843.4343 kapa ho romella lengolo-tsoibila. support@sealevel.com ho fumana phihlello ea ho jarolla le ho kenya litaelo tsa mokhanni oa lefa.

1. Qala ka ho fumana, ho khetha, le ho kenya software e nepahetseng ho tsoa sebakeng sa polokelo ea lisebelisoa tsa Sealevel software driver.
2. Khetha Nomoro ea Karolo (P/N: 3093) bakeng sa adaptara ea hau lethathamong.
3. Khetha 'Khoasolla Hona Joale' bakeng sa mofuta oa SeaIO Classic bakeng sa Windows. Seta file e tla lemoha ka bo eona sebaka sa ts'ebetso ebe e kenya likarolo tse nepahetseng. E latelang (ho ipapisitse le sebatli sa hau) khetha khetho ea 'Matha lenaneo lena sebakeng sa lona sa hajoale kapa' Bula '. Latela tlhahisoleseding e hlahang skrineng se latelang.
4. Ho ka hlaha skrini se nang le phatlalatso e reng: “Mohatisi a ke ke a tsebahatsoa ka lebaka la mathata a ka tlase: Saena ea Authenticode ha e fumanehe.” Ka kopo, khetha konopo ea 'E' 'me u tsoele pele ka ho kenya. Phatlalatso ena e bolela feela hore Operating System ha e tsebe hore mokhanni o laetse. E ke ke ea baka kotsi leha e le efe tsamaisong ea hau.
5. Nakong ea ho seta, mosebelisi a ka hlakisa li-directory tsa ho kenya le litlhophiso tse ling tse ratoang. Lenaneo lena le boetse le eketsa matseno ho ngoliso ea sistimi e hlokahalang bakeng sa ho hlakisa li-parameter tsa ts'ebetso bakeng sa mokhanni e mong le e mong. Khetho ea ho hlakola e kenyellelitsoe ho tlosa registry/ini kaofela file likenyo tse tsoang ho sistimi.

Kenyelletso ea Karete ea Windows NT: Kamora ho fihlela mehato e kaholimo, hlahisa Panel ea Taolo 'me u tobetse habeli letšoao la SeaIO Devices. Ho kenya karete e ncha, tobetsa "Add Port." Pheta mokhoa ona bakeng sa likarete tse ngata tsa SeaIO kamoo u lakatsang ho li kenya.

Ho kenya Linux 

• O TLAMEHA ho ba le litokelo tsa "motso" ho kenya software le bakhanni.
• Poleloana e thata haholo.
• Basebelisi ba ka fumana README file e kenyellelitsoe ka har'a sephutheloana sa SeaIO Linux se nang le litaelo tsa bohlokoa tsa ho kenya le ho hlophisoa tse etsang hore ho kenngoa ha Linux ho be bonolo ho mosebedisi.

1. Qala ka ho fumana, ho khetha, le ho kenya software e nepahetseng ho tsoa sebakeng sa polokelo ea lisebelisoa tsa Sealevel software driver.
2. Khetha Nomoro ea Karolo (P/N: 3093) bakeng sa adaptara ea hau lethathamong.
3. Khetha 'Khoasolla Hona Joale' bakeng sa mofuta oa SeaIO Classic bakeng sa Linux.
4. Kopitsa seaio.tar.gz bukeng ea lapeng ka ho ngola: cp seaio.tar.gz ~
5. Fetola bukeng ea hau ea lapeng ka ho thaepa: cd
6. Unzip le Utar bakhanni le software ka ho ngola: tar -xvzf seaio.tar.gz
7. Fetolela bukeng ea SeaIO ka ho thaepa: cd seaio.
8. Basebelisi ba tlameha ho khoasolla le ho bokella mohloli oa kernel oa Linux.
9. Joale bokella le ho lokisa li-drivers hore li sebelisoe ka ho thaepa: etsa install
10. Ha sistimi e koetsoe 'me e sa koaloa, kenya karete ea hau ea SeaIO PCI (Sheba Ho Kenyelletsoa 'Meleng).
11. Hokela sistimi hape 'me u qale Linux. Kena joalo ka "motso".
    Ho kenya Linux, E Tsoetse pele
12. Laola mokhanni oa SeaIO ka ho thaepa: seaioload
13. Mokhanni o nolofalitse karete mme o se a loketse ho sebelisoa.

Ho theha Linux ho kenya mokhanni ka bo eona; sheba buka ea Linux mabapi le phepelo ea hau e khethehileng bakeng sa thuso. Bakeng sa tšehetso e eketsehileng ea software, ka kopo letsetsa Sealevel Systems 'Technical Support, 864-843-4343. Tšehetso ea rona ea tekheniki ha e lefelloe 'me e fumaneha ho tloha ka 8:00 AM - 5:00 PM ka Nako ea Bochabela, Mantaha ho fihlela Labohlano. Bakeng sa lengolo-tsoibila la tšehetso ikopanye le: support@sealevel.com.

Ho kenya 'mele

Adapter e ka kenngoa sebakeng leha e le sefe sa katoloso ea PCI.

Se ke oa kenya Adapter mochining ho fihlela software e kentsoe ka botlalo.

1. Tlosa matla a PC. Hakolla thapo ea motlakase.
2. Tlosa sekoahelo sa nyeoe ea PC.
3. Fumana sekotjana sa 5V PCI 'me u tlose sekoaelo sa tšepe se se nang letho.
4. Ka bonolo kenya adaptara ea PCI ka har'a sekotjana. Etsa bonnete ba hore adaptara e lutse hantle.
5. Ka mor'a hore adaptara e kenngoe, lithapo li lokela ho tsamaisoa ka tsela e bulehileng ka har'a bracket. Bracket ena e boetse e na le ts'ebetso ea ho imolla khatello e lokelang ho sebelisoa ho thibela ho tlosoa ha cable ho sa lebelloang.
6. Kenya sekoti seo u se tlositseng sebakeng se se nang letho 'me u se sebelise ho sireletsa adaptara sekoting. (Sena sea hlokahala ho netefatsa hore FCC Karolo ea 15 ea latela melao.)
7. Tlosa sekoahelo.
8. Hokela thapo ea motlakase

DIO-32B e se e loketse ho sebediswa.

Lenaneo la DIO-32B

Sealevel's SeaI/O software e teng ho thusa ho nts'etsapele lits'ebetso tse tšepahalang bakeng sa lelapa la Sealevel Systems la li-adapter tsa I/O tsa dijithale. E kenyellelitsoe ho software ea Sealevel ke mesebetsi ea mokhanni e sebelisoang ho fihlella I/O hammoho le lisebelisoa tse thusang.amplisebelisoa le lisebelisoa.

Lenaneo la Windows
SeaI/O API (Application Programmer Interface) e fana ka mefuta e fapaneng ea mehala e sebetsang ea boemo bo holimo e kentsoeng laebraring ea Windows dynamic link (DLL). API e hlalosoa ka thuso file (Start/Programs/SeaIO/SeaIO Help) tlas'a "Application Programmers Interface". Thuso ena file e boetse e kenyelletsa lintlha tse qaqileng tse sebetsanang le ho kenya/ho tlosoa ha software le lintlha tse mabapi le latency, logic states, le peakanyo ea lisebelisoa.
Bakeng sa baetsi ba puo ea C re khothaletsa ho sebelisa API ho fihlella DIO-32B. Haeba o ntse o etsa mananeo ho Visual Basic, ho eletsoa ho sebelisa taolo ea ActiveX e kenyellelitsoeng le SeaI/O.

Samples le Utilities
Mefuta e fapaneng ea sampmananeo le lisebelisoa (tse ka sebelisoang le khoutu ea mohloli) li kenyelelitsoe le SeaI/O. Litokomane tse ling ho tsena sampe ka fumanoa ka ho khetha "Start/Programs/SeaIO/Sample Tlhaloso ea Kopo".

Lenaneo bakeng sa Linux
SeaI/O bakeng sa Linux e na le likarolo tse peli tse kholo: kernel module le laeborari. Module oa kernel ke sesebelisoa se bonolo sa IO sa ho feta, se lumellang laebrari ho sebetsana le mesebetsi e tsoetseng pele e fuoang basebelisi ba SeaI/O. E fanoe ka sebopeho sa 'tarball' 'me e ka bokelloa habonolo le ho kenyelletsoa ho kernel build.

Application Programmers Interface (API)
Litsamaiso tse ngata tsa sejoale-joale ha li lumelle ho fihlella ka kotloloho ho Hardware. Mokhanni oa SeaIO le API li kenyelelitsoe ho software e fumanehang e le ho fana ka taolo holim'a lisebelisoa tsa Windows le Linux. Sepheo sa karolo ena ea bukana ke ho thusa moreki ka ho etsa 'mapa oa API ho lipehelo le li-relay tsa 3093 ka ho khetheha. Litokomane tse felletseng tsa API li ka fumanoa thusong e tsamaeang le eona file.

Digital I/O Interface
DIO-32B e fana ka likou tse 'ne tse tšoanang tsa ho kenya / ho tsoa (I/O). Likou li hlophisitsoe e le likou tsa A, B, C, le D. Port A le B ke likou tsa ho kenya tse hokahaneng le lintho tse kenang tse ikhethileng, athe C le D ke likou tse hlahisoang ke lehlaka. Ho nka aterese ea I/O ea 300 Hex tafole e latelang e bontša liaterese tsa Boema-kepe.

Aterese ea Motheo	Hex	Decimal	Mokhoa
Aterese ea Port A	300	768	Boema-kepe ba ho Kena bo Ikhethileng
Aterese ea Port B	301	769
Aterese ea Port C	302	770	Reed Relay Output Port
Aterese ea Port D	303	771

Kenyelletso Ports
Boema-kepe ba A le B ke li-ports tsa 8-bit tse hokahaneng le li-sensor tsa ho kenya tse ikhethileng. Sensor e 'ngoe le e' ngoe e ka sebelisoa ho hokahanya voltage input ebe o utloa hore na voltage e butswe kapa e timme. Sensor e 'ngoe le e' ngoe e arohane (mabapi le sebaka se tloaelehileng) ho tsoa ho sensor e 'ngoe le e' ngoe hape e arohane le sebaka sa PC se amohelang. Sena se bolela hore mats'oao a joalo ka mohala oa boemo bo tlase ba ACtage, motor servo voltage, le matšoao a ho laola li-relay a ka 'utloa', kapa a baloa ke PC, ntle le kotsi ea tšenyo ka lebaka la li-loops tsa fatše kapa liphoso tsa fatše.

Karolo e 'ngoe le e' ngoe ea ho kenya sensor e na le mohanyetsi oa hona joale oa moeli o sebelisetsoang ho fokotsa ho kenya hona joale ho optoisolator. Optoisolator e na le diode tse peli tsa 'back-to-back' ka hare. Sena se lumella mats'oao a AC kapa DC hore a utluoe, ho sa tsotelehe polarity. Ha sebelisoa voltage phahameng ka ho lekaneng ho etsa hore optoisolator e etelle pele, tlhahiso ea optoisolator e theoha tlaase (0 volts), 'me pontšo e baloa e le boemo bo tlaase ba logic (binary 0) ke PC. Ha lets'oao la ho kenya le le tlase haholo ho bulela optoisolator, tlhahiso e ea holimo, 'me sekhahla sa koung se baloa ke PC e le boemo bo phahameng ba logic (binary 1). Tšitiso ea ho kenya letsoho e 'ngoe le e 'ngoe e ikhethileng e ka ba 560 ohms (fektheri ea kamehla). Optoisolator e hloka hoo e ka bang 3mA ho bulela. Boemo bo phahameng ba hona joale ke 50mA. Ho na le lintho tse peli tseo u lokelang ho nahana ka tsona ha u khetha mochine oa ho kenya letsoho. Ea pele ke "turn-on vol".tage hore potoloho e utloe, 'me ea bobeli ke palo e kholo ea ho kenya letsohotage. Boholo ba ho kenya letsohotage ha ea tlameha ho fana ka matla a mangata haholo ho mohanyetsi oa ho kenya letsoho hape ha ea tlameha ho fetisa lintlha tsa hajoale tsa tlhahiso ea optoisolator. Ho sebetsa liforomo tse latelang:

• Bulela Moqtage = lerotholi la diode + (bulela hona joale) x (ho hanyetsa) [Ex: 1.1 + (.003) x R]
• Input Current = ((input voltage) -1.1V) / (boleng bo hanyetsanang)
• Boholo voltage = 1.1 + square motso oa (.25(boleng bo hanyetsang))

Li-Ports tse Kenyellelitsoeng, Tsoelapele
Tafole e latelang e bonts'a lihanyetsi tse tloaelehileng tsa ho kenya le mefuta e amanang le e 'ngoe le e 'ngoe.

Kenyeletso Mohanyetsi	Phetoho-On	Kenyeletso Range	Max Kenyeletso	Max Hona joale
220Ω	1.8V	1.8 - 7.0V	8.5V	27mA
560Ω	2.8V	2.8 - 10.6V	12.9V	20mA
1KΩ	4.1V	4.1 - 13.8V	16.9V	15mA
2.2KΩ	7.7V	7.7 - 20.0V	24.5V	10mA
3.3KΩ	10.0V	10.0 - 24.0V	30.0V	9mA
4.7KΩ	15.2V	15.2 - 28.0V	35.0V	7mA

The turn-off voltage bakeng sa bahanyetsi bohle e ka tlase ho 1V. Ho eketsa mohanyetsi oa ho kenya ka tsela e nepahetseng ho ka eketsa matla a mangata a ho kenya letsohotage. Hobane li-resistors tsa DIP tse kentsoeng li sebelisoa, li ka nkeloa sebaka ke boleng bo fapaneng. Sealevel, haeba ho hlokahala, e ka etsa sena. Li-circuits tsa ho kenya ha lia rereloa ho lekola li-circuits tsa 120-volt AC. Ntle le ho ba holimo haholo a voltage bakeng sa lipotoloho, ho kotsi ho ba le bophahamo bo bokaalotage ka karete.

Likabelo tsa Pin tsa Sensor Ports
Lintho tse kenyang li hokahantsoe ka sehokelo sa basali sa DB-37 kareteng.

Port A Bit	Port A Pins	Boema-kepe B Bit	Boema-kepe B Lithako
0	18,37	0	10,29
1	17,36	1	9, 28
2	16,35	2	8,27
3	15,34	3	7,26
4	14,33	4	6,25
5	13,32	5	5,24
6	12,31	6	4,23
7	11,30	7	3,22
Fatše	2,20,21
+ 12 Volts	19
+ 5 Volts	1

Output Ports (Reed Relay)
Li-relay tsa lehlaka li fana ka boleng bo phahameng haholo, bophelo bo bolelele, hajoale bo tlase (10 Watt maximum), le ho koaloa ha li-switches tse omeletseng. Li-relay tsa lehlaka ha li tšoanelehe bakeng sa lisebelisoa tse phahameng tsa hona joale 'me li ka senngoa ke ho fetola mojaro oa inductive, moo tlhase e hlahang ho pholletsa le mabitso ka hare. Hangata li-relay lia buleha le ho koaloa ha li matlafalitsoe.

Output Ports (Reed Relay) Pin Assignments (CA111)
Liphetho li hokahantsoe ka sehokelo sa banna sa DB-37 thapong ea sehokelo e fanoeng (ntho # CA111).

Boema-kepe ba C	Relay	Lithako tsa Port C	Port D Bit	Relay	Lithako tsa Port D
0	K16	2,20	0	K8	10,28
1	K15	3,21	1	K7	11,29
2	K14	4,22	2	K6	12,30
3	K13	5,23	3	K5	13,31
4	K12	6,24	4	K4	14,32
5	K11	7,25	5	K3	15,33
6	K10	8,26	6	K2	16,34
7	K9	9,27	7	K1	17,35
Fatše	18,36,37
+ 5 li-volts	19
+ 12 li-volts	1

Relative Addressing vs. Absolute Addressing
SeaIO API e etsa phapang pakeng tsa mekhoa ea ho bua ka "ka ho feletseng" le "kamano". Ka mokhoa o felletseng oa ho bua, khang ea Port ho ts'ebetso ea API e sebetsa joalo ka mokhoa o bonolo oa ho fokotsa ho tloha ho aterese ea I / O ea sesebelisoa. Mohlala, Port #0 e bua ka setsi sa aterese sa I/O + 0; Boema-kepe ba #1 bo bolela motheo oa liaterese tsa I/O + 1. Mokhoa o amanang le aterese, ka lehlakoreng le leng, o bua ka likou tsa ho kenya le ho tsoa ka mokhoa o utloahalang. Ka khang ea boema-kepe ea 0 le ts'ebetso ea API e reretsoeng ho hlahisa data, sebaka sa pele sa (0) se hlahisoang sesebelisoa se tla sebelisoa. Ka mokhoa o ts'oanang, ka khang ea Port ea 0 le ts'ebetso ea API e etselitsoeng ho kenya data, kou ea pele (0) ea sesebelisoa e tla sebelisoa. Mekhoeng eohle ea aterese, linomoro tsa boema-kepe li na le zero-indexed; ke hore, kou ea pele ke boema-kepe #0, kou ea bobeli ke #1, ea boraro ke #2, joalo-joalo.

Taolo ea Hardware e otlolohileng
Litsamaisong moo lenaneo la basebelisi le nang le phihlello e tobileng ho hardware (DOS) litafole tse latelang li fana ka 'mapa le mesebetsi eo DIO-32B e fanang ka eona.

Mosebetsi E fumaneha	Boema-kepe	Aterese Hex	Boema-kepe Mofuta
RD	A	Motheo +0	Boema-kepe ba ho Kena bo Ikhethileng
RD	B	Motheo +1
RD/WR	C	Motheo +2	Reed Relay Output Port
RD/WR	D	Motheo +3

Ho bala Maikutlo
Lintho tse kentsoeng li sebetsa Tlase. Haeba ha ho voltage e sebelisoa ho e 'ngoe ea likhetho tse fapaneng e khutlisa e le ngoe karolong eo. Haeba AC kapa DC voltage sebelisoa e khutlisa zero karolong eo.

Ho bala Litholoana
Likou tsa relay li khutlisa tse tlatselletsang boleng boo hajoale bo ntseng bo sebelisoa ho tsamaisa li-relay.

Ho Ngola Litholoana
Li-ports ke tsona feela likou tse ka ngoloang. Li-relay tsa DIO-32B tse tloaelehileng hangata lia buleha. Ho koala relay motho o tlameha ho ngoloa ho bitana e loketseng.

Ngodisa Tlhaloso
Li-port tsohle li tla kenngoa ka mor'a ho seta bocha kapa ho tima.

Aterese		Mokhoa	D7	D6	D5	D4	D3	D2	D1	D0
Motheo+0	Kenya Port A	RD	PAD7	PAD6	PAD5	PAD4	PAD3	PAD2	PAD1	PAD0
Motheo+1	Kenya Port B	RD	PBD7	PBD6	PBD5	PBD4	PBD3	PBD2	PBD1	PBD0
Motheo+2	Output Port C	RD/WR	PCD7	PCD6	PCD5	PCD4	PCD3	PCD2	PCD1	PCD0
Motheo+3	Output Port D	RD/WR	PDD7	PDD6	PDD5	PDD4	PDD3	PDD2	PDD1	PDD0
Motheo+4		RD	0	0	0	0	0	0	0	0
Motheo+5	Hatisa Boemo	RD/WR	IRQEN	IRQST	0	0	0	0	IRC1	IRC0

Thibela Taolo
Ha e lumelletsoe, litšitiso li hlahisoa ho Port A bit D0.

IRQEN	Thibela lumella	1 = e nolofalitsoe	0 = e holofetse (0 ka matla a holimo)
IRC0 IRC1	Khetha mokhoa oa ho emisa, sheba tafole e ka tlase Khetha mokhoa oa ho emisa, sheba tafole e ka tlase

Thibela Mokhoa oa ho Khetha Tafole
Mohloli o sitisang ke Base+0 bit D0. Ha u khetha Mofuta oa Khatiso, kamehla thibela litšitiso pele u fetola kapa u beha maemo. Sena se tla thusa ho thibela litšitiso tse sa lebelloang kapa tse sa lebelloang hore li etsahale.

IRC1	IRC0	Thibela Mofuta
0	0	Boemo bo tlase
0	1	Boemo bo Phahameng
1	0	Moeli o Oeleng
1	1	Phahamiso e Phallang

Ha u sebelisa litšitiso tsa Boemo bo Phahameng le bo Tlase, tšitiso e etsahala ha tlhahiso ea D0 e fetoha ho boemo bo Phahameng kapa bo Tlase. Sena se tla etsa hore komporo e lule e le tšitiso ho fihlela boemo ba ho kenya bo fetoha.

Khaotsa Bala
Ho bala Interrupt Status port (Base+5) ho tlosa tšitiso efe kapa efe e ntseng e emetse.

IRQST

(D0) Hanyetsa Boemo

1 = sitiso e ntse e emetse, 0 = ha ho letho

Litšobotsi tsa Motlakase

Likaroloana

• Khetho ea boema-kepe ea I/O e tsoang ho 100H - 3FFH.
• 2 lihlopha tsa SPST relay 'me e' ngoe le e 'ngoe e na le li-relay tse 8.
• Li-ports tse 2 tsa li-bits tse robeli.
• Li-relay tsa lehlaka tse 10 tsa VA DIP tse tšepahalang haholo.
• Li-adapter tse ngata li ka lula komporong e le 'ngoe.
• Liaterese tsohle, data, le matšoao a taolo li tsamaisana le TTL.

Litlhaloso

Kenyelletso Ports

Phetla On Hona joale	3 mA
Isolator Diode Theoha	1.1 VDC
Resistor Power Max	.25 W
Boholo Kenyeletso Range	3-13 VDC / VAC

Phetiso ea Phatlalatso

Ikopanye Max Matla Lintlha	10 W
Ikopanye Moqtage Boholo	100 VDC / VAC
Ikopanye le Boholo ba Hona Joale	.5A AC/DC RMS
Ikopanye Khanyetso, Ea pele	.15Ω
E lekantsoe Bophelo	Mojaro o Tlase: Ho koaloa ha limilione tse 200 Boholo ba Mojaro: Ho koaloa ha limilione tse 100
Ikopanye Lebelo	E sebetsa: .5 mS Phatlalatso: .5 mS Bophahamo: .5 mS
Boholo Ho sebetsa Lebelo	600 Hz

Mocheso Range

Ho sebetsa	0°C – 70°C
Polokelo	-50°C – 105°C

Liboto tsena tse hatisitsoeng tsa potoloho ke mask a solder holim'a koporo e se nang letho kapa mask a solder holim'a nickel ea tin.

Tšebeliso ea Matla

Phepelo mola	+5 VDC	+ 12VDC
Lintlha	800 mA	800 mA

Litlhaloso, Tsoelapele

Litekanyo tsa 'Mele

PCB Bolelele	9.8 lisenthimithara (24.8 cm)
PCB Height (ho kenyeletsoa le Goldfingers)	4.2 lisenthimithara (10.7 cm)

Tlhahiso
All Sealevel Systems Printed Circuit boards li hahiloe ho boleng ba UL 94V0 'me li lekoa ka motlakase 100%. Liboto tsena tsa potoloho tse hatisitsoeng ke limaske tse rekisoang holim'a maske a koporo kapa a solder holim'a nickel ea tin.

Example Lipotoloho

Kena Potoloho 

Sephetho sa Potoloho

Sehlomathiso A - Ho rarolla mathata

Ho latela mehato ena e bonolo ho ka felisa mathata a tloaelehileng haholo.

1. Kenya software pele. Ka mor'a ho kenya software, joale tsoela pele ho eketsa hardware. Sena se beha ho hlongoa ho hlokahalang files libakeng tse nepahetseng.
2. Bala bukana ena ka botlalo pele u leka ho kenya adaptara ho sistimi ea hau.
3. Sebelisa Mookameli oa Sesebelisoa tlas'a Windows ho netefatsa ho kenngoa hantle.
4. Sebelisa applet ea SeaIO Control Panel kapa leqephe la thepa la Mookameli oa Lisebelisoa bakeng sa boitsebiso ba karete le tlhophiso.
5. Tse latelang li tsejoa likhohlano tsa I/O:
   • Litlhophiso tsa 278 le 378 li kanna tsa hohlana le adaptara ea hau ea I/O ea printa.
   • 3B0 e ke ke ea sebelisoa haeba adaptara ea Monochrome e kentsoe.
   • 3F8-3FF hangata e boloketsoe COM1:
   • 2F8-2FF hangata e boloketsoe COM2:
   • 3E8-3EF hangata e boloketsoe COM3:
   • 2E8-2EF hangata e boloketsoe COM4:

Haeba mehato ena e sa rarolle bothata ba hau, ka kopo letsetsa Sealevel Systems' Support Support, ho 864-843-4343. Tšehetso ea rona ea tekheniki ha e lefelloe 'me e fumaneha ho tloha ka 8:00 AM-5:00 PM Ka nako ea Bochabela ho tloha Mantaha ho fihlela Labohlano. Bakeng sa imeile ea tšehetso ikopanye support@sealevel.com.

Sehlomathiso B - Mokhoa oa ho Fumana Thuso

Qala ka ho bala Tataiso ea ho Thunya Mathata ho Sehlomathiso sa A. Haeba thuso e ntse e hlokahala ka kopo, sheba ka tlase. Ha o batla thuso ea tekheniki, ka kopo, fumana bukana ea hau ea mosebelisi le litlhophiso tsa adaptara ea hajoale. Haeba ho khonahala, ka kopo kenya adaptara komporong e ikemiselitseng ho etsa tlhahlobo ea mafu. Sealevel Systems e fana ka karolo ea FAQ ho eona websebaka. Ka kopo sheba sena ho araba lipotso tse ngata tse tloaelehileng. Karolo ena e ka fumanoa ho http://www.sealevel.com/faq.asp. Sealevel Systems e boloka leqephe la Lehae ho Marang-rang. Aterese ea leqephe la rona ke www.sealevel.com. Lintlafatso tsa morao-rao tsa software le libuka tse ncha li fumaneha ka sebaka sa rona sa marang-rang sa FTP se ka fumanehang ho tsoa leqepheng la lehae la rona. Tšehetso ea tekheniki e fumaneha Mantaha ho isa Labohlano ho tloha 8:00 am ho 5:00 pm nako ea bochabela. Tšehetso ea tekheniki e ka finyelloa ho 864-843-4343.

TUMELO EA HO BUSETSOA E TLAMEHA HO FUMANA HO LITSAMAISO TSA SEALEVEL PELE HO BUSETSOA LITHO TSA HO AMOHELA. TUMELO E KA FUMANA KA HO LETSA LITSAMAISO TSA SEALEVEL LE HO KOPA TUMELLO EA TUMELO EA THEKISO (RMA).

Sehlomathiso C - Silk Screen - 3093 PCB

Sehlomathiso D – Litsebiso tsa Tumellano

Polelo ea Federal Communications Commission (FCC).

Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea lisebelisoa tsa digital tsa Sehlopha sa A, ho latela Karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi ha thepa e sebelisoa sebakeng sa khoebo. Thepa ena e hlahisa, e sebelisa, 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela bukana ea litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Ts'ebetso ea lisebelisoa tsena sebakeng sa bolulo e kanna ea baka tšitiso e kotsi maemong a joalo mosebelisi o tla hlokoa ho lokisa tšitiso ka litšenyehelo tsa mosebelisi.

Polelo ea Tataiso ea EMC
Lihlahisoa tse nang le CE Label li phethahatsa litlhoko tsa taelo ea EMC (89/336/EEC) le ea low-vol.tagtaelo ea e (73/23/EEC) e fanoeng ke Komisi ea Europe. Ho latela litaelo tsena, litekanyetso tse latelang tsa Europe li tlameha ho finyelloa:

• TS EN55022 Sehlopha sa A - "Meeli le mekhoa ea ho lekanya litšobotsi tsa tšitiso ea radio ea lisebelisoa tsa theknoloji ea tlhahisoleseling"
• TS EN 55024 Lisebelisoa tsa Theknoloji ea Boitsebiso Litšobotsi tsa Tšireletso Meeli le mekhoa ea ho lekanya

Ena ke Sehlahisoa sa Sehlopha sa A. Sebakeng sa lapeng, sehlahisoa sena se ka baka tšitiso ea seea-le-moea, moo mosebelisi a ka hlokehang ho nka mehato e lekaneng ho thibela kapa ho lokisa tšitiso. Kamehla sebelisa cabling e fanoeng le sehlahisoa sena ha ho khoneha. Haeba ho se na thapo e fanoeng kapa haeba ho hlokahala thapo e 'ngoe, sebelisa thapo e sirelelitsoeng ea boleng bo holimo ho boloka ho latela litaelo tsa FCC/EMC.

Tiisetso

Boitlamo ba Sealevel ba ho fana ka litharollo tse molemohali tsa I/O bo bonahala ho Tiisetso ea Bophelo Bohle e leng maemo ho lihlahisoa tsohle tse entsoeng ke Sealevel tse entsoeng ke I/O. Re khona ho fana ka tiisetso ena ka lebaka la taolo ea rona ea boleng ba tlhahiso le ho tšepahala ho phahameng historing ea lihlahisoa tsa rona tšimong. Lihlahisoa tsa Sealevel li entsoe le ho etsoa setsing sa eona sa Liberty, South Carolina, se lumellang taolo e tobileng holim'a nts'etsopele ea lihlahisoa, tlhahiso, ho chesoa le liteko. Sealevel e fihletse ISO-9001: Setifikeiti sa 2015 ka 2018.

Leano la Tiisetso
Sealevel Systems, Inc. (ka mor'a mona "Sealevel") e fana ka tiiso ea hore Sehlahisoa se tla lumellana le ho sebetsa ho latela litlhaloso tsa tekheniki tse phatlalalitsoeng 'me se ke ke sa hloka bofokoli ba thepa le moetso oa nako ea tiisetso. Ha ho ka etsahala hore e hlolehe, Sealevel e tla lokisa kapa e nke sebaka sa sehlahisoa ho latela boikhethelo ba Sealevel. Ho hloleha ho bakoang ke tšebeliso e mpe kapa tšebeliso e mpe ea Sehlahisoa, ho hloleha ho latela lipehelo kapa litaelo, kapa ho hloleha ho bakoang ke bohlasoa, tlhekefetso, likotsi, kapa liketso tsa tlhaho ha li fanoe tlas'a tiisetso ena. Tšebeletso ea tiisetso e ka fumanoa ka ho isa Sehlahisoa ho Sealevel le ho fana ka bopaki ba theko. Moreki o lumela ho sireletsa Sehlahiswa kapa ho nka kotsi ya tahlehelo kapa tshenyeho nakong ya leeto, ho lefa ditefiso tsa thomelo esale pele ho Sealevel, le ho sebedisa setshelo sa pele sa thomello kapa se lekanang le sena. Tiisetso e sebetsa feela ho bareki ba pele mme ha e fetisoe.
Tiisetso ena e sebetsa ho Lihlahisoa tse entsoeng ke Sealevel. Lihlahisoa tse rekiloeng ka Sealevel empa li entsoe ke motho e mong li tla boloka tiisetso ea moetsi oa pele.

Non-Warranty Lokiso/Tekobotjha
Lihlahisoa tse khutlisitsoeng ka lebaka la tšenyo kapa tšebeliso e mpe 'me Lihlahisoa tse hlahlobiloeng hape ntle le bothata bo fumanoeng li tla lefisoa ho lokisoa/ho hlahlojoa bocha. Odara ea theko kapa nomoro ea karete ea mokoloto le tumello li tlameha ho fanoa molemong oa ho fumana nomoro ea RMA (Return Merchandise Authorization) pele o khutlisa Sehlahisoa.

Mokhoa oa ho fumana RMA (Return Merchandise Authorization)
Haeba o hloka ho khutlisa sehlahisoa bakeng sa tokiso kapa tokiso eo e seng ea tiisetso, u tlameha ho qala ka ho fumana nomoro ea RMA. Ka kopo ikopanye le Sealevel Systems, Inc. Tšehetso ea Theknoloji bakeng sa thuso:

• E fumaneha Mantaha - Labohlano, 8:00 AM ho 5:00 PM EST
• Mohala  864-843-4343
• Email support@sealevel.com.

Matšoao a khoebo
Sealevel Systems, Incorporated e ananela hore matshwao ohle a kgwebo a hlahang bukaneng ena ke letshwao la tshebeletso, letshwao la kgwebo kapa letshwao la kgwebo le ngodisitsweng la khamphani e amehang.

Litokomane / Lisebelisoa

SEALEVEL DIO-32B ISA 16 Reed Relay Output 16 Isolated Input Digital Interface [pdf] Bukana ea Mosebelisi DIO-32B, ISA 16 Reed Relay Output 16 Isolated Input Digital Interface, DIO-32B ISA 16 Reed Relay Output 16 Isolated Input Digital Interface, Relay Output 16 Isolated Input Digital Interface, 16 Isolated Input, Isolated Digital Input Interface, Digital Interface

Litšupiso

• Bukana ea Mosebelisi