RV ELECTRONICS Programmable LCD Metsi Indicator

Litlhaloso:

• Lebitso la Sehlahisoa: Sesupo sa Maemo a Metsi a Programmable LCD
• E lumellana le: RV Electronics Programmable Sender Probes
• E loketse bakeng sa: Litanka tsa polasetiki le tsa tšepe

Litaelo tsa Tšebeliso ea Sehlahisoa

Mohato oa 1: Ho beha maemo le ho kenya

1. Khetha sebaka se loketseng ho beha pontšo ea gauge ea metsi.
2. Netefatsa hore ho na le phihlello ea ho fepa selulo sa mehala ka lehare la lebota kapa k'haboteng ho ea romelang tanka.
3. Sebelisa template e fanoeng ho tšoaea lesoba la yuniti ea ponts'o.
4. Seha lebota la ka hare ka hloko, u etse bonnete ba hore ha u senye maballo leha e le afe a lebota, wiring kapa lipeipi tsa metsi.
5. Fepa sehokelo sa lithapo ka lerako la lebota ho ba rometseng.
6. Tlosa tšehetso ea li-tab tse khomarelang ho yuniti ea pontšo ebe u e hokela leboteng.

Mohato oa 2: Tekanyo ea Tanka

Haeba ts'ebetso ea hau e fapane le bophahamo ba tanka bo tloaelehileng ba 180mm 'me motho ea e romelang a eme bohareng ba tanka, latela mokhoa oa ho lekanya tanka:

Triple Gauge ExampLe:

1. Hlakola metsi ka har'a litanka tseo u lakatsang ho li lokisa.
2. Tlosa sekoahelo se ka pele sa boto ea tekanyo ka ho sutumelletsa mapheo ka ntle ho tloha bohareng.
3. Fumana switjha ea DIP ea maemo a 6 'me u behe konopo ka pele ho boto ea likhakanyo.

Mehato ea ho lekanya tanka:

1. Mohato oa 1: Ho etsa hore tanka e be e se nang letho, thellela switch ea DIP boemong ba 1 ho ea ho ON ebe o tobetsa konopo ea SET ho fihlela linale tse 2 tse tlase tsa LCD holim'a lebone la gauge. Etsa bonnete ba hore o khutlisa switjha ea DIP ho OMA ha o qetile.
2. Mohato oa 2: Ho etsa hore tanka e tle e tletse, tlatsa tanka ea metsi ho fihlela boholo ba eona, thellela switch ea DIP sebakeng sa 2 ho ea ho ON, 'me u tobetse konopo ea SET ho fihlela linale tse peli tse ka holimo tsa LCD holim'a lebone la gauge. Etsa bonnete ba hore o khutlisa switjha ea DIP ho OMA ha o qetile.

Bakeng sa C Tank, sebelisa li-switches 3 le 4 bakeng sa lisebelisoa tse se nang letho le tse feletseng ka ho latellana. Bakeng sa R ​​Tank, sebelisa li-switches 5 le 6 bakeng sa ho bala ho se nang letho le ho feletseng ka ho latellana.
Ha o etsa phoso kapa o batla ho seta tanka botjha ho di-setting tsa feme, thellela feela di switch EMPTY le FULL DIP ho ON bakeng sa tanka eo o lakatsang ho e seta botjha (mohlala, DIP boemo ba 1 + 2). Tobetsa 'me u tšoare konopo ea SET ho fihlela linale tsohle tsa gauge li bonesa ON le HO TLOA.
Ho seta botjha gauge hore e be di-setting tsa feme ya kamehla, seta di-switches tsohle tsa DIP ho ON ebe o tobetsa o hatelle konopo ya SET ho fihlela dinale tsohle tsa gauge di benya ON le HO TLOHA.

LBH:

• P: Na sesupo see sa boemo ba metsi se ka sebelisoa le litanka tse entsoeng ka thepa ntle le polasetiki le tšepe?
  A: Che, pontšo ena ea boemo ba metsi e etselitsoe ho sebelisoa ka litanka tsa polasetiki le tsa tšepe.
• P: Nka lekanya tanka joang haeba kopo ea ka e na le bophahamo bo fapaneng ba tanka kapa boemo ba motho ea e romelang?
  K: Ka kopo latela mokhoa oa ho lekanya tanka o boletsoeng bukeng ea mosebelisi. E fana ka litaelo tsa mohato ka mohato mabapi le mokhoa oa ho lekanya litanka ho latela ts'ebetso ea hau e khethehileng.
• P: Nka seta tanka joang ho litlhophiso tsa feme?
  K: Ho seta tanka botjha ho di-setting tsa feme, suthela EMPTY le FULL DIP switch ho ON bakeng sa tanka eo o lakatsang ho e seta botjha. Tobetsa 'me u tšoare konopo ea SET ho fihlela linale tsohle tsa gauge li bonesa ON le HO TLOA.
• P: Ke etsa joang ho seta sekala kaofela ho li-setting tsa feme ea kamehla?
  A: Ho seta bocha gauge eohle ho li-setting tsa feme ea kamehla, beha li-switches tsohle tsa DIP ho ON ebe o tobetsa le ho ts'oara konopo ea SET ho fihlela linale tsohle tsa gauge li bonesa ON le HO TLOA.

LENANEO LE TS'OAO LA MAEMO A METSI A LCD

TRIPLE TANK – DITAELO TSE DI LOKELANG

BAKENG SA TŠEBELETSO LE RV ELECTRONICS PROGRAMMABLE SENDER PROBES FEELA. E LOKELANG BAKENG SA LITANK TSA PLASTIKI LE TŠEPE

• Khetha sebaka sa ho beha pontšo ea sekala sa metsi moo ho khonahalang ho fepa selulo sa mehala ka lekhalo la lebota kapa k'haboteng ho motho ea rometseng tanka. Tšoaea lesoba u sebelisa template e fanoeng 'me u sehe lebota la ka hare ka hloko ho etsa bonnete ba hore ha u sehe maballo a lebota, lithapo kapa lipeipi tsa metsi.
• Fepa lisebelisoa tsa marang-rang ho batho ba rometseng ka lekhalo la lebota, tlosa lithapo tse khomarelang ho tloha karolong ea pontšo, 'me u li khomarele leboteng.
• Yuniti ea ponts'o ea RV Electronics e sebetsa ka ho bala motho e mong le e mong ea rometseng voltage le ho e bapisa le molumo oa pele o lekantsoeng o se nang letho le o felletsengtagbakeng sa tanka e 'ngoe le e 'ngoe.
• Tanka e 'ngoe le e 'ngoe e se nang letho le e feletseng e hlophisitsoe ka ho thellisa e 'ngoe ea li-switches tsa DIP le ka ho tobetsa konopo ea set. Li-setting tsa feme tse lokiselitsoeng esale pele ke tsa bophahamo bo tloaelehileng ba tanka ea 180mm 'me motho ea e romelang o eme bohareng ba tanka.
• Haeba kopo ea hau e fapane, u tla hloka ho latela mokhoa oa ho lekanya tanka ka tlase.

LIEKETSENG MOHATO

1. MOHATO 1: Triple gauge example: Hlakola metsi ka har'a litanka tseo u lakatsang ho li lekanya 'me u tlose sekoahelo se ka pele ka ho sutumelletsa mapheo ho ea ka ntle ho tloha bohareng. Hang ha u se u tlositsoe u tla bona phetoho ea DIP ea 6-position le konopo e behiloeng ka pele ho boto ea ho lekanya.
2. MOHATO 2: Sets'oants'o sa litanka tse tharo se setšoantšong sa 1 se bonts'a li-plug tsa L, C & R li sebelisoa. Ho Setšoantšo sa 2, li-switches 1 & 2 li sebelisoa bakeng sa plug ea L, li-switch tse 3 & 4 bakeng sa plug ea C le 5 & 6 bakeng sa plug ea R.
3. MOHATO 3: Ho seta ho se na letho, suthisa switch ea DIP boemong ba 1 ho ea ho ON ebe o tobetsa konopo ea SET ho fihlela linale tse 2 tse tlase tsa LCD holim'a lebone la gauge. (Etsa bonnete ba hore o khutlisa switjha ea DIP ho OMA ha o qetile).
4. MOHATO 4: Ho beha ponts'o e tletse, tlatsa tanka ea metsi hore e tlale, thellela switch ea DIP sebakeng sa 2 ho ea ho ON, 'me u tobetse konopo ea SET ho fihlela linale tse peli tse holimo tsa LCD holim'a lebone la gauge. (Etsa bonnete ba hore o khutlisa switjha ea DIP ha o qetile).
   Bakeng sa C Tank, sebelisa 3 bakeng sa EMPTY le 4 bakeng sa FULL. Bakeng sa R ​​Tank, sebelisa 5 bakeng sa EMPTY le 6 bakeng sa FULL.
   1. Ha o etsa phoso kapa o batla ho seta tanka botjha ho di-setting tsa feme, thellela feela di switch EMPTY le FULL DIP ho ON bakeng sa tanka eo o lakatsang ho e seta botjha. (mohlala, boemo ba DIP 1 + 2) Tobetsa o hatelle konopo ea SET ho fihlela linale tsohle li benya ON le HO TLOA.
   2. Haeba u lakatsa ho seta sekala bocha ho li-setting tsa feme ea kamehla, beha feela li-switches tsohle tsa DIP ho ON ebe o Tobetsa 'me u tšoare konopo ea SET ho fihlela linale tsohle tsa gauge li bonesa ON le HO TLOA.

E entsoe AUSTRALIA KE RV ELECTRONICS PTY LTD
1 ARDTORNISH STREET, HOLDEN HILL, SA 5088
(08) 8261 3500
info@rvelectronics.com.au
rvelectronics.com.au

Litokomane / Lisebelisoa

RV ELECTRONICS Programmable LCD Metsi Indicator [pdf] Buka ea Taelo Lesupa la Maemo a Metsi a Programmable LCD, Lesupa la Maemo a Metsi a LCD, Lesupa la Maemo a Metsi, Lesupa la Boemo, Lesupa

Litšupiso

• Bukana ea Mosebelisi