roger MC16 Molaoli oa Phihlello ea 'Meleng
Tokomane ena e na le lintlha tse fokolang tse hlokahalang bakeng sa ho seta le ho kenya sesebelisoa. Tlhaloso e qaqileng ea li-parameter tsa tlhophiso le ts'ebetso e hlalositsoe ho Bukana ea Ts'ebetso e fumanehang ho www.roger.pl.
LIEKETSENG
Molaoli oa MC16 o inehetse haholo ho taolo ea phihlello ea mamati ho sistimi ea RACS 5. Taolo ke sesebelisoa se hloahloa sa lisebelisoa tsa peripheral joalo ka li-terminals tsa MCT, li-interface tsa OSDP-RS485 tse kenyelletsang li-terminals tsa OSR series, li-terminals tsa PRT, li-interface tsa Wiegand le li-expander tsa MCX. Maikutlo le lintho tse tsoang ho molaoli kapa lisebelisoa tse hokahantsoeng tsa peripheral li ka sebelisoa ho laola lisebelisoa tse kang linotlolo tsa mamati, likonopo tsa ho tsoa, li-alamo, joalo-joalo. Liphetolelo tse fapaneng le mefuta e fapaneng ea balaoli e thehiloe ho mojule o le mong oa hardware 'me li fapana ka laesense ho likarete tsa bona tsa memori. . Lilaoli tse tsebahalang haholo tsa MC16-PAC li fanoa ka lihlopha tsa MC16-PAC-x-KIT.
TLHOKOMELISO KA LENANEO LA ROGERVDM
Tokiso ea boemo bo tlase ka software ea RogerVDM e thusa ho hlalosa maemo a mantlha a molaoli oa MC16 ke hore, aterese ea IP le senotlolo sa puisano.
Mokhoa oa ho hlophisa oa MC16 ka software ea RogerVDM:
- Hokela molaoli ho netweke ea Ethernet 'me u hlalose aterese ea IP ea komporo ea hau ka har'a marang-rang a tšoanang le a molaoli ea nang le 192.168.0.213 aterese ea kamehla ea IP.
- Qala lenaneo la RogerVDM, khetha sesebelisoa sa MC16 v1.x, mofuta oa morao-rao oa firmware le mocha oa puisano oa Ethernet.
- Khetha lethathamong kapa u kenye aterese ea IP ea molaoli ka letsoho, kenya konopo ea puisano ea 1234 'me u qale ho hokahanya le molaoli.
- Ho menu e ka holimo, khetha Lisebelisoa ebe u Seta senotlolo sa puisano ho hlalosa phasewete ea hau bakeng sa molaoli.
- Ka fensetere e ka sehloohong, hlakisa aterese ea hau ea IP ea molaoli.
- Numella babali ba PRT kapa Wiegand haeba molaoli a tlameha ho sebetsa le bona.
- Ka boikhethelo kenya maikutlo bakeng sa molaoli le sepheo sa eona ho thusa ho tsebahatsa ha bona nakong ea tlhophiso e tsoelang pele ea sistimi.
- Ka boikhethelo litlhophiso tsa bekapo ho tobetsa Romela ho File…
- Tobetsa Romela ho Sesebediswa ho nchafatsa tlhophiso ea molaoli le ho hakolla ka khetho ea Sesebediswa ho menu e holimo ebe o Hakolla.
Hlokomela: Tlhophiso ea boemo bo tlase ea MC16 tsamaisong ea RACS 5 v2 e lokela ho etsoa ka lenaneo la RogerVDM, empa phetoho e tsoelang pele ea tlhophiso ea boemo bo tlase bakeng sa molaoli oa MC16 le lisebelisoa tsa peripheral tsa MCT/MCX tse hokahaneng li ka etsoa ka lenaneo la VISO v2.
TLHOKOMELISO KA LENANEO LA VISO
Tlhophiso ea boemo bo holimo ka software ea VISO e thusa ho hlalosa mohopolo oa molaoli. Lintlha tse ling mabapi le maemo a ts'ebetso le tlhophiso ea maemo a holimo li fanoe ho Bukana ea Ts'ebetso ea MC16 hammoho le lintlha tsa kopo tsa AN002 le AN006.
KHOPOTSO RESE
Mokhoa oa ho seta memori o seta bocha li-setting tsohle hore e be tsa kamehla 'me li hlahise 192.168.0.213 aterese ea IP le senotlolo sa puisano se se nang letho.
Mokhoa oa ho seta memori ea MC16:
- Hakolla phepelo ea motlakase.
- Mela e khutšoanyane ea CLK le IN4.
- Khutlisa phepelo ea motlakase, li-LED tsohle li tla khanya ebe li ema mots. 6s.
- Tlosa khokahano pakeng tsa mela ea CLK le IN4, li-LED li tla emisa ho phunya 'me LED2 e tla be e le teng.
- Ema hoo e ka bang. 1.5 min ho fihlela LED5+LED6+LED7+LED8 li ntse li phunya.
- Qala hape selaoli (tloha phepelo ea motlakase tima le ho bulela).
- Qala RogerVDM 'me u etse tlhophiso ea boemo bo tlase.
LIEKETSENG FIRMWARE
Firmware e ncha e ka romelloa ho molaoli ka software ea RogerVDM. Firmware ea morao-rao file e fumaneha ho www.roger.pl.
Mokhoa oa ho ntlafatsa firmware ea MC16:
- Hokela le molaoli o sebelisa software ea RogerVDM.
- Litlhophiso tsa bekapo ka ho tobetsa Romela ho File…
- Ho menu e ka holimo, khetha Lisebelisoa ebe o Update firmware.
- Khetha firmware file ebe o tobetsa Update.
- Kamora ho ntlafatsoa ha firmware ema ho fihlela LED8 e lla. Qala ho seta memori botjha ha ho hlokahala.
- Etsa kapa u khutlisetse maemo a tlase ho software ea RogerVDM.
Hlokomela: Nakong ea ts'ebetso ea ntlafatso ea firmware, hoa hlokahala ho netefatsa phepelo ea motlakase e tsoelang pele le e tsitsitseng bakeng sa sesebelisoa. Haeba e sitisoa, sesebelisoa se ka hloka ho lokisoa ke Roger.
PHEPELO EA MOTLAKASE
Selaoli sa MC16 se etselitsoe phepelo ea motlakase ho tloha ho 230VAC/18VAC e nang le matla a fokolang a 20VA, empa e ka boela ea fanoa ka 12VDC le 24VDC. Tabeng ea phepelo ea motlakase ea 12VDC, betri ea bekapo e ke ke ea hokela ka kotloloho ho MC16 mme maemong a joalo phepelo ea motlakase ea backup e tlameha ho fanoa ke yuniti ea phepelo ea motlakase ea 12VDC.
HLOMELO
| Letlapa la 1. MC16 screw terminals | |
| Lebitso | Tlhaloso |
| BAT+, BAT- | Betri ea bekapo |
| AC, AC | 18VAC kapa 24VDC phepelo ea motlakase |
| AUX-, AUX+ | 12VDC/1.0 phepelo ea motlakase e hlahisoang (bakeng sa senotlolo sa lemati) |
| TML-, TML+ | 12VDC/0.2A phepelo ea motlakase e tsoang (bakeng sa babali) |
| IN1-IN8 | Mela ea ho kenya |
| GND | Fatše |
| OUT1-OUT6 | 15VDC / 150mA transistor line line |
| A1,B1 | RS485 bese |
| CLK, DTA | RACS CLK/DTA bese |
| A2,B2 | Ha e sebelisoe |
| NO1, COM1, NC1 | 30V/1.5A DC/AC (REL1) relay |
| NO2, COM2, NC2 | 30V/1.5A DC/AC (REL2) relay |
| Lethathamo la 2. Lipontšo tsa LED tsa MC16 | |
| Lebitso | Tlhaloso |
| LED1 | Mokhoa o tloaelehileng |
| LED2 | ON: Mokhoa oa ts'ebeletso (sebopeho sa boemo bo tlase)
E BUILE 'me molaoli o emisitse: phoso ea ho qala data ea RAM-SPI Ho phunya (~ 2Hz): firmware e sa lumellaneng kapa phoso ea ho qala Ho phunya ka potlako (~ 6Hz): RAM-SPI kapa phoso ea memori ea Flash |
| LED3 | ON: Phoso ea boemo bo holimo ea tlhophiso Ho phunya: Phoso ea tlhophiso ea boemo bo tlase |
| LED4 | Ha ho karete ya memori kapa phoso ya karete ya memori |
| LED5 | Phoso ea tlaleho ea ketsahalo |
| LED6 | Phoso ea ho qala, phoso ea nakong e fetileng ea phihlello ea data kapa liphoso tsa firmware |
| LED7 | ON: Ha ho laesense
Pulsing: E fetetse nako ea ts'ebetso e nang le laesense |
| LED8 | Pulsing: Ho sebetsa hantle ha molaoli |
| LED2 HO + | Ntlafatso ea firmware |
| LED3 pulsing | |
| LED5 - LED 8
ho phuphutsa |
Ho lokisa mohopolo ho felile |
| LED 1 - LED 2
ho phuphutsa |
Phetiso e tsoang ho Seva e 'ngoe ea Lipuisano ho feta e hokahaneng (sheba molaetsa AN008) |
| LED1 - LED 8
ho phuphutsa |
E 'ngoe ea marokho a potoloho a fumanehang mohlala CLK + IN4 e qalile |
| Lethathamo la 2. Lipontšo tsa LED tsa MC16 | |
| Lebitso | Tlhaloso |
| LED1 | Mokhoa o tloaelehileng |
| LED2 | ON: Mokhoa oa ts'ebeletso (sebopeho sa boemo bo tlase) Pulsing: RAM kapa Flash SPI phoso ea memori |
| LED3 | ON: Phoso ea boemo bo holimo ea tlhophiso Ho phunya: Phoso ea tlhophiso ea boemo bo tlase |
| LED4 | Ha ho karete ya memori kapa phoso ya karete ya memori |
| LED5 | Phoso ea tlaleho ea ketsahalo |
| LED6 | Ha e sebelisoe |
| LED7 | Ha e sebelisoe |
| LED8 | Pulsing: Ho sebetsa hantle ha molaoli |
| Lethathamo la 3. Tlhaloso | |
| Phepelo voltage | 17-22VAC, lebitso la 18VAC 11.5V-15VDC, ka lebitso la 12VDC
22-26VDC, 24VDC ka lebitso |
| Tšebeliso ea hona joale | 100 mA bakeng sa 18VAC (ha ho na meroalo ho liphetho tsa AUX/TML) |
| Lintho tse kenang | Lisebelisoa tse robeli tsa parametric (IN1..IN3) tse hoketsoeng ka har'a phepelo ea motlakase hammoho le sehanyetsi sa 5.6kΩ. Hoo e ka bang. 3.5V boemo ba ho qala bakeng sa lintlha tsa NO le NC. |
| Liphetho tsa relay | Liphetho tse peli tsa relay (REL, REL2) e nang le puisano e le 'ngoe ea NO/NC, 30V/1.5A e lekantsoe |
| Liphetho tsa Transistor | Liphetho tse tšeletseng tse bulehileng tsa mokelli oa transistor (OUT1-OUT6), 15VDC / 150mA e lekantsoe. |
| Liphello tsa phepelo ea motlakase | Liphello tse peli tsa matla: 12VDC/0.2A (TML) le 12VDC/1A (AUX) |
| Libaka | RS485: ho fihla ho 1200m
Wiegand le RACS CLK/DTA: ho fihla ho 150m Phepelo ea motlakase: ho latela tsebiso ea kopo ea AN022 |
| Khoutu ea IP | N/A |
| Sehlopha sa tikoloho (acc. to EN 50131-1) | Sehlopha sa I, maemo a kakaretso a ka tlung, mocheso: +5 ° C ho +40 ° C, mongobo o lekanyelitsoeng: 10 ho 95% (ha ho condensation) |
| Litekanyo H x W x D | 72 x 175 x 30 limilimithara |
| Boima ba 'mele | joalo ka. 200g |
Lintlha:
- Tabeng ea monyako oa ho bala, sebali se le seng se hokahane le molaoli. MCT terminal e ka kenngoa ka ID ea kamehla = aterese ea 100.
- Tabeng ea babali ba PRT, setšoantšo se tšoana le tabeng ea babali ba MCT ntle le ho hokahanya le mela ea CLK le DTA sebakeng sa RS485 A le B.
- Haeba ho na le babali ba Wiegand ba sa lumellaneng le motlakase ho ka 'na ha hlokahala hore u kenye li-interface tsa MCI-7.
- Tabeng ea li-interface tsa OSDP tse kenyelletsang babali ba lihlooho tsa OSR hoa hlokahala ho kenya li-interface tsa MCI-3 libese tsa RS485.
- Litšoantšo li kenyelletsa mamati a nang le lithunya tsa motlakase. Haeba ho na le senotlolo sa motlakase, ho sebelisoa terminal ea NC ea relay sebakeng sa NO terminal.
- Litšoantšo li kenyelletsa likonopo tsa ho tsoa. Haeba ho na le mamati a kenang / a tsoa a ka sebelisoa bakeng sa ho bula menyako ea tšohanyetso.
Hlokomela: Sesebelisoa se na le sebopeho sa puisano sa marang-rang sa Ethernet. Ha e le hantle, sesebelisoa se ka sebelisoa ho WAN le LAN ka bobeli, ha tiisetso ea moetsi e koaheloa feela bakeng sa ts'ebetso ho LAN e ka thōko e boloketsoeng feela tsamaiso ea ho kena kapa tsamaiso e 'ngoe eo sesebelisoa se tla sebelisoa ho eona.
TLHOKOMELO
Letšoao lena le behiloeng holim'a sehlahisoa kapa sephutheloana le bontša hore sehlahisoa ha sea lokela ho lahloa le litšila tse ling kaha sena se ka ba le phello e mpe tikolohong le bophelong bo botle. Mosebelisi o tlamehile ho isa lisebelisoa libakeng tse khethiloeng tsa pokello ea litšila tsa motlakase le tsa elektroniki. Bakeng sa lintlha tse felletseng mabapi le ho sebelisa hape, ikopanye le ba boholong sebakeng sa heno, k'hamphani ea ho lahlela lithōle kapa moo u rekang teng. Pokello e arohaneng le ho sebelisoa bocha ha mofuta ona oa litšila ho kenya letsoho ts'ireletsong ea lisebelisoa tsa tlhaho 'me ho bolokehile ho bophelo bo botle le tikoloho. Boima ba thepa bo hlalositsoe tokomaneng.
Ikopanye
- Roger Sp. oa sp. k.
- 82-400 Sztum
- Setšoantšo sa 59
- Mohala: +48 55 272 0132
- Fax: +48 55 272 0133
- Theknoloji. tšehetso: +48 55 267 0126
- E-mail: support@roger.pl
- Web: www.roger.pl
Litokomane / Lisebelisoa
 |
roger MC16 Molaoli oa Phihlello ea 'Meleng [pdf] Buka ea Taelo MC16 Selaoli sa Phihlello ea 'Meleng, Selaoli sa Phihlello ea 'Meleng, Selaoli sa Phihlello, Selaoli |
