RECTORSEAL SS1 Inline Primary Float Switch
Tlhahisoleseding ya Sehlahiswa
| Lethathamo la likarolo |
|---|
| (1) Cap / Float Subassembly (e kenyelletsa Stem / Wire, Cam Locks tse peli, Sekoaelo, Phapang) |
| (2) Tee |
| (3) Sesebelisoa sa ho hloekisa |
| (4) Setikara sa Temoso (ha sea bontšoa) |
Litaelo tsa ho Kena:
US Patent No's 6,442,955 & 10,406,570
Tlhokomeliso: Ho hloleha ho bala le ho ikamahanya le litemoso tsohle, litemoso le litaelo pele o qala ho kenya ho ka baka kotsi ea botho le/kapa tšenyo ea thepa le ho hlakola waranti. Tlhokomeliso: sesebelisoa sena se sebetsa ka liphaephe tsa 3/4 le 1 tsa drain.
Bakeng sa ho sebelisoa ka phala e le 'ngoe ea drain, eketsa li-socket couplings tse 1 x 1/3 (tse sa kenyelletsoeng) lipheletsong tsa SS4.
Litaelo tsa Tšebeliso ea Sehlahisoa
Litaelo tsa 3/4 Drain Pipe
- Stem/Wire Cam Lock
- Cap Float
- Bophahamo bo ka feto-fetoha bakeng sa maemo a sensitivity
- Inlet
- Thellela tlase
- Mabenkele a lisebelisoa tsa ho hloekisa ka har'a 'mele oa SS1
- Hokela ho sesebelisoa sa khatello kapa se hloekisang
- Sethala
KHOPO
Ho Switch
| Terata Nut | Ho tsoa ho Thermostat |
|---|---|
| Khubedu | Bosoeu |
| Botala | Bosehla |
LIEKETSENG TS'OANELO
24-Volts A/C, Maximum 1.25 Amp. Bokhoni ba ho Jara, 6ft., Lithapo tse etellang pele tsa AWG tse 18.
Safe-T-Switch SS1 Seboka
| Boholo | Nomoro ea ho taka | Letsatsi | TŠEPO |
|---|---|---|---|
| A | ASB00449 | 5/8/2020 | 01-001-A |
Tiisetso e Lekanyelitsoeng
E entsoe ke RectorSeal, LLC 2601 Spenwick Drive Houston, TX 77055, USA 800-231-3345 Fax 800-441-0051
rectorseal.com
Tlhaloso
Safe-T-Switch® Model SS1 e kentsoe inline. Swipe ea lehlaka la makenete e nang le patented e ka kenngoa moepeng oa ho fihla ho 45 °. SS1 switch cap e tlosoa habonolo bakeng sa ho hloekisa le ho sebeletsa likhoele tsa condensate.
Lethathamo la Likarolo: (Setšoantšo sa 1)
- Cap/Float Subassembly (e kenyeletsa Stem/Wire, Cam Locks tse peli, Cap, Float)
- Tee
- Sesebelisoa sa ho hloekisa
- Setikara sa tlhokomeliso (ha se bonoe)
Litaelo tsa ho Hloma
Tlhokomeliso: Ho hloleha ho bala le ho ikamahanya le litemoso tsohle, litemoso le litaelo pele o qala ho kenya ho ka baka kotsi ea botho le/kapa tšenyo ea thepa le ho hlakola waranti. Tlhokomeliso: sesebelisoa sena se sebetsa ka liphaephe tse 3/4 ″ le 1″ tsa drain.
Bakeng sa ho sebelisoa ka 1″ pipe ea drain, eketsa li-socket couplings tsa 1″ x 3/4″ (tse sa kenyellelitsoeng) lipheletsong tsa SS1.
DITAELO BAKENG SA 3/4″ HLABA PEPI
- Hakolla motlakase ho yuniti ea moea (A/C) phanele e kholo.
- Kgomaretsa ¾” stub (e sa kenyelletswang) ho adaptara ya pan outlet.
- Khomaretsa sekeno sa Tee holim'a ¾” stub (Hlokomela hore Tee ha e tsoe tseleng). Tee e ka tšelisoa ho fihla ho 45 ° ho tloha pan outlet.
- Khomaretsa seemahale sa Tee moleng oa drainage o tlase.
- Lekola likhokahano tsohle tsa drainage le tse loketseng bakeng sa ho lutla ha lipeipi.
- Wiring switjha ho latela litaelo tlas'a WIRING (Fig 7).
- Fetola li-Cam Locks tse peli sebakeng sa UNLOCK (setšoantšo sa 2). Tlosa Cap / Float Subassembly ho tloha Tee. Lekola switch ka ho phahamisa Float ha yuniti e ntse e sebetsa. Haeba e kentsoe ka nepo, yuniti ea A/C e tla emisa.
- Sireletsa Cap / Float Subassembly (A) Beha Cap / Float Subassembly holim'a Tee, ebe u potoloha li-Cam Locks tse peli sebakeng sa LOCK (Fig 3). U SE KE UA KHOMISA KIPELETSO/FLOAT KA HARE KA TEE. (B) Ho kgothaletswa ho sutumelletsa Stem sebakeng se ka tlase bakeng sa ho lemoha metsi ka ho fetisisa (setšoantšo sa 4). Haeba kutloisiso e hloka ho lokisoa, tsamaisa kutu ho ea holimo kapa tlase.
- Boikutlo ba sesebelisoa sa liteko: Kopanya drain ho tloha sebakeng sa ho kenya 'me u tsamaise yuniti ea A/C ho tlatsa pan. Float e lokela ho phahama 'me yuniti ea A/C e eme pele pan e tlala. (A) Haeba pan e khaphatseha, eketsa kutloisiso ea switjha ka: 1 - Ho fetola kopano eohle tlase, kapa 2 - Ho sutumelletsa Stem fatše. (B) Haeba yuniti e emisa kapele haholo kapa khafetsa, fokotsa maikutlo a switjha ka: 1 -Ho suthisetsa kopano eohle holimo, kapa 2 - Ho hulela Stem holimo.
- Sebaka se kenyelelitsoe Setikara sa Temoso sebakeng se bonahalang, joalo ka setšoantšisi sa moea kapa yuniti ea condenser.
Sephutheloana
- Khoutu 97085
- Size Safe-T-Switch SS1
- Qty. ka nyeoe ea 24
- Lbs. ka nyeoe ea 11
- Cubic Ft ka nyeoe ea 1.01
KHOPO
- Hokela motlakase ho yuniti ea A/C phanele e kholo pele o etsa mosebetsi oa motlakase.
- Haeba e le sieo, ho khothaletsoa hore fuse e inline e kenngoe ho sireletsa potoloho ea 24-volt le tieho ea nako e hlophisoe ho qoba ho tsamaea ka libaesekele ka potlako.
- Batla thapo ya thermostat ya 24-volt e kenang yuniti ya setshwari sa moya.
- Hakolla kapa u khaole terata e khubelu ebe u hokela ho switch loto ka terata nut. Hokela switch lead e 'ngoe ho terminal ea sets'oants'o sa moea. Ho kenyelletsa switch ho potoloho e khubelu ho koala yuniti kaofela. Haeba e behiloe potolohong e mosehla, fan e tsoela pele ho matha (ho thibela ho hōla ha hlobo nakong ea nako e telele e le sieo).
- Hokela motlakase hape ho yuniti ea A/C.
LIEKETSENG TS'OANELO
24-Volts A/C, Maximum 1.25 Amp. Bokhoni ba ho Jara, 6ft., Lithapo tse etellang pele tsa AWG tse 18.
TLHOKOMELO
Bula Cap/Float Subassembly ho hlahloba, ho hloekisa le ho leka sesebelisoa sena bonyane matsatsi a mang le a mang a 30 le ho latela tlhoekiso e 'ngoe le e 'ngoe ea mohala oa drain.
- Tlosa Cap / Float Subassembly.
- Hlakola lithōle kapa litšitiso tse ling ka hare ho Tee le haufi le Cap/Stem Subassembly.
- Hlahloba tšenyo leha e le efe. Haeba tšenyo e bonoa, tlosa sehlahisoa sena ka se secha.
- Lekola tšebetso ea switjha ka ho latela Mohato oa 7-9 karolong ea "INSTALLATION INSTRUCTIONS" ka holimo. Haeba sehlahiswa sena se hlolehile ho lekola tshebetso, se nkele sebaka ka se setjha.
- Eketsa RectorSeal's Nu-Line™ drain cleaner ho thibela ho ata ha algae le li-clog.
Kenya hape 'me u sireletse Cap/Stem Subassembly.
DIRECTIONAL hloekile TAELO
1. Hlakola Sesebelisoa sa ho hloekisa ho tsoa ho Cap/Float Subassembly.
2. Tlosa Cap / Float Subassembly ho tloha Tee.
3. Hlakola lithōle kapa litšitiso tse ling ka hare ho Tee.
4. Shebana le sesebelisoa sa Cleanout Tool (setšoantšo sa 5) u lebile mothapo oa drainage o lokelang ho hloekisoa (ebang ke ka holimo kapa ka tlaase ho noka, ho itšetlehile ka hore na tšitiso e hokae). Kenya Sesebelisoa sa ho hloekisa ka har'a Tee.
5. Hokela sesebediswa se hatellang (kapa sa vacuuming) (jwalo ka RectorSeal Mighty Pump™, kapa RectorSeal Lineshot™) sebakeng sa ho kena sa Cleanout Tool. Pump kapa vacuum ho fihlela sethibelo se tlositsoe.
6. Koala ka ho feletseng sesebelisoa sa khatello (kapa sa vacuum) 'me u se hakolle ho Cleanout Tool.
7. Tlosa Sesebelisoa sa ho hloekisa ho tloha ho Tee ebe u se pata holim'a Cap / Float Subassembly (Fig 6).
8. Kenya Cap / Float Subassembly khutlela ka Tee. Fetola Li-Cam Locks tse peli ho ea sebakeng sa LOCK.
BOHLOKOA TŠIRELETSO
- Sesebelisoa sena se tlameha ho kenngoa ka thata ho latela litaelo tsa moetsi (ho netefatsa ts'ebetso e nepahetseng) le ho latela mekhoa eohle e sebetsang ea liphaephe, drainage le likhoutu tsa motlakase.
- Kotsi ea motlakase. Hlakola phepelo ea motlakase pele o kenya sehlahisoa sena ho qoba ts'okelo ea motlakase le/kapa ts'enyo ea lisebelisoa. Sebelisa potolohong ea Sehlopha sa 2 (thermostat) feela, eseng ho feta 24-volts, 1.25 amps ho qoba tshenyo kapa kotsi ya mollo.
- Sesebelisoa sena se ke ke sa lemoha li-clogs tse hlahang holimo ho tloha sebakeng sa ho kenya.
- Haeba e le sieo, ho kgothaletswa hore fuse le ho lieha ha nako ho kenngoe, ho sireletsa potoloho ea 24-volt le ho qoba lisebelisoa tse potlakileng tsa lisebelisoa, pele ho kenya sehlahisoa sena.
- Sehlahisoa sena se reretsoe ho sebelisoa metsing feela. Eseng bakeng sa ho sebelisoa ka boteng ba maro a tukang kapa mouoane.
- Sheba bukana e nepahetseng ea ts'ebetso ea lisebelisoa tsa HVAC pele u kenya sehlahisoa sena.
- U se ke ua sebelisa litsamaiso tse peli tsa compressor.
Tiisetso e Lekanyelitsoeng
RectorSeal, LLC e etsa Warranty ea Limited Express ea hore ha litaelo tsa ho boloka le ho sebetsana le lihlahisoa tsa rona li lateloa re tiisa hore lihlahisoa tsa rona li se na bofokoli. TIISETSO ENA E LEKANETSO E HLAHANG E BONAHALA MAHALA A LITIISETSO TSE LING TSE FELENG KAPA TSE FUMANEHANG, HO kenyeletsoa TIISETSO EFE KAPA E 'FE EA KHOETSO EA KHOETSO KAPA HO LOKELANG HO FIHLELA MORERO OA KHETHEHILENG, LE OA MOTHO O MONG O MONG OA LLC KA NTLE. Tharollo e le 'ngoe ea tlolo ea Warranty ea Limited Express e tla ba puseletso ea theko ea theko. Likoloto tse ling kaofela ha li amoheloe ebile ha li na thuso, 'me RectorSeal, LLC e ke ke ea ikarabella bakeng sa litšenyehelo tsa tšohanyetso kapa tse ling.
E entsoe ke
RectorSeal, LLC
2601 Spenwick Drive Houston, TX 77055, USA 800-231-3345 Fax 800-441-0051 rectorseal.com
Khamphani ea CSW Industrials. RectorSeal, li-logos le matšoao a mang a khoebo ke thepa ea RectorSeal, LLC, mekhatlo e amanang le eona kapa mofani oa eona oa laesense 'me a sirelelitsoe ke litokelo tsa molao, lets'oao la khoebo le melao e meng ea thepa ea mahlale, 'me li ka se sebelisoe ntle le tumello. RectorSeal e na le tokelo ea ho fetola litlhaloso ntle le tsebiso pele. ©2020 RectorSeal. Litokelo tsohle li sirelelitsoe. R50109-0620
Litokomane / Lisebelisoa
 |
RECTORSEAL SS1 Inline Primary Float Switch [pdf] Buka ea Mong'a SS1 Inline Primary Float Switch, SS1, Inline Primary Float Switch, Primary Float Switch, Float Switch, Switch |
