FireSting®-O2
Optical Oxygen Meter
MOEKETSI MOSEBETSI
O2 T
Phetolelo ea Tokomane 1.06
FEELAVIEW
Motlakase oa USB-powered fiber-optic meter FireSting®-O2 o nang le liteishene tse 1, 2, kapa 4 bakeng sa lisebelisoa tse ngata le likarolo tsa lihlooho tsa sensor:
- likanale configurable ka bolokolohi bakeng sa O2 le mocheso
- potefolio e pharaletseng ea optical sensor (lihlooho tse ngata tse thehiloeng ho fiber le tse se nang mabitso)
- le (ultra-)high speed sampling
- puseletso ea mocheso oa lerata le zero-latency
- ntlafatseng kgatello ya mabone a ambient le
- mekhoa e bohlale ea ho lekanya bakeng sa bophelo bo bolelele ba sensor
- qeto ea oksijene le mocheso ka nako e le 'ngoe ka sample
Methara ena ea oksijene ea optical e kenyellelitse khatello ea sepakapaka le li-sensor tsa mongobo bakeng sa ho lekanya hantle le ho bonolo ha oksijene sensor, empa hape le matšeliso a othomathiki a khatello ea litekanyo tsa oksijene. Ho feta moo, FireSting®-O2 e fana ka liphetho tsa analog tse 4 le mokhoa oa ho phatlalatsa.
Pyro Workbench e ncha e ncha le e bonolo ea basebelisi e lumella ho sebetsa ha limithara tse 'maloa tsa FireSting®-O2 ka mokhoa o ts'oanang le tsamaiso ea likanale tse ngata.
LIEKETSENG
FireSting®-O2 e tla le liteishene tsa 1, 2, kapa 4 (optical sensor ST-connectors 1 ho 4) ho fihlela ho 4 fiber-optic sensors le sehokelo se le seng (T) bakeng sa probe ea mocheso ea Pt100 e kantle. Li-connectors tsa optical channel li na le mebala e mebala-bala, e bontšang analyte (oksijene kapa mocheso), eo hajoale e lekantsoeng 'me e ka fetoloa mocha ka mong. Mohaho oa moea o lekanya mocheso o ka hare, khatello le li-sensors tsa mongobo le tse potolohileng. Qoba ho koahela masoba ana ho etsa bonnete ba hore moea o potoloha ka bolokolohi ho li-sensor tsa ka hare. 
Sehokelo sa Micro-USB se lehlakoreng le letšehali se fana ka phepelo ea matla le phapanyetsano ea data le PC. Lehlakoreng le letona la eona, ho na le sehokelo X1 bakeng sa matla le segokanyimmediamentsi sa dijithale (7-pins) le sehokelo X2 bakeng sa tlhahiso ea analoge (5 pins) e teng.
PHAKAMATSO
Mohato 1: Khoasolla software e nepahetseng le bukana ho tsoa ho tab ea download ea sesebelisoa sa hau se rekiloeng ho www.pyroscience.com
Mohato 2: Hokela mithara ea FireSting®-O2 ka thapo e nyenyane ea USB ho Windows PC/laptop (Windows 7, 8, 10).
Mohato 3: Hokela sensor(s) e nepahetseng ea PyroScience ho lihokelo tsa sensor ea optical 1 ho isa ho 4 sesebelisoa (bona 4).
Mohato 4: Kopanya mochine oa mocheso o ka ntle (ntho ea TDIP15 kapa TSUB21) ho sehokelo sa Pt100 kapa, ho fapana le hoo, mochine oa mocheso oa optical (sheba 5) ho e 'ngoe ea li-connectors optical sensor 1 ho 4 bakeng sa matšeliso a itekanetseng a mocheso.
Mohato 5: Lokisetsa litekanyetso tse nepahetseng tsa ho lekanya, joalo ka ha ho hlalositsoe libukeng tse fapaneng tsa sensor (bona 8).
Mohato 6: Qala software ea logger ka ho tobetsa "Pyro Workbench" e khuts'oane komporong ea hau.
Mohato 7: Bula Settings Wizard ka ho tobetsa setšoantšong sa FireSting®-O2. Khetha analyte e fapaneng 'me u kenye litlhophiso tsohle tsa sensor bakeng sa sensor ka' ngoe, ho kenyelletsa le mokhoa o nepahetseng oa matšeliso a mocheso.
Mohato 8: Bula Wizard ea Calibration 'me u latele litaelo tsa calibration bakeng sa kutlo e' ngoe le e 'ngoe. Litekanyo tse nang le li-sensor tse fapaneng li tla qala ka bo eona kamora hore li-calibrations tsohle tse hlokahalang li etsoe.
Mohato 9: Lokisa li-graph ho latela likhetho tsa hau.
Mohato 10: Kenya ts'ebetsong ho Rekoa ha Boitsebiso.
KHOPANG MATSOSO
Li-fiber-optic oksijene le li-sensorer tsa mocheso, hammoho le likhoele tsa optical tse hlokahalang bakeng sa ho bala li-sensor tse se nang mabitso li hokahane le li-ST-connectors tsa FireSting®-O2 (1 ho ea ho 4) tse nang le plug ea faeba e motona.
- Tlosa likatiba tse ntšo ho plug ea sensor / fiber.
- Tlosa li-caps tse khubelu ho tloha likoung tsa sensor ho FireSting®-O2 (li-caps tse khubelu li lokela ho kenngoa hape haeba li se li sa sebelisoe ho sireletsa optics).
- Kenya plug ea faeba e tona ea thapo ea sensor ho ST-port (sehokelo sa faeba ea mosali) ea FireSting®-O2 'me u fetole khokahanyo ea bayonet ka mokhoa o bonolo ho fihlela polaka e notletsoe ka thata.
MAHLOMOLA MAHLO
FireSting®-O2 e tsamaisana le mefuta e mengata e fapaneng ea oksijene ea optical le li-sensor tsa mocheso tse tsoang ho PyroScience. Bakeng sa ho fetaview ea mefuta e fumanehang ea optical sensor, ka kopo bona PyroScience websebaka.|
5.1 Li-Sensors tsa Fiber-optic
| Sensoro | Ntho | Analyte | Kopo |
| Li-Probes tse matla | OXROB… | 2 | metsi a tsoileng matsoho, khase |
| Retractable Tip Minisensor | 'OXR... | 2 | metsi, khase & semi-solid samples |
| TPR... | Nako. | ||
| Fixed Tip Minisensor | 'OXF... | 2 | metsi, khase le halofo e tiileng sampe nyenyane (esp. metsi a leoatle) |
| TPF… | Nako. | ||
| OXF…-PT | 2 | khase (puncturing septa/packaging) |
|
| Bare Fiber Sensors Minisensors | OXB… 02 |
metsi, khase le moetlo | |
| TPB… | Nako. | ||
| Li-probes tse hanyetsanang le Solvent | OXSOLV | 2 | li-solvents tse amohelehang tsa polar le tse seng polar |
| OXSOLV-PTS | 2 | mouoane oa solvent o amohelehang |
* e fumaneha hape e le Microsensor; metsi=metsi, metsi a lewatle, metswako ya metsi
5.2 Li-Sensors tsa Oksijene tse se nang Matho
| Sensoro | Ntho | Analyte | Kopo |
| Li-nanoprobes | OXNANO | 2 | tharollo ea metsi le microfluidics |
| Matheba a Sensor | OXSPS | 2 | metsi le khase |
| TPSPS | Nako. | ||
| Linkho tsa kutlo | OXVIAL... | 2 | metsi le khase |
| TOVIAL... | Temp. le 02 | ||
| Phallo-Ka Lisele | OXFLOW… | 2 | metsi le khase |
| OKFTC... | |||
| TPFLOW | Nako. | ||
| TOFTC2 | Temp. le 02 |
metsi=metsi, metsi a lewatle, metswako ya metsi
KEKETSO KOU
Boema-kepe bo atolositsoeng ba FireSting®-O2 bo na le likhokahano tse peli X1 le X2 (li-plug-plug tse loketseng tsa sehokelo li ka fumanoa ho Phoenix Contact ntho ea 1778887 le 1778861).
6.1 Sehokelo X1 (Matla, Sehokelo sa Dijithale, Analog In)
Tlhophiso ea phini ea sehokelo X1 e fanoe tafoleng e ka tlase. Pins 1-2 (GND le VCC) e ka sebelisoa bakeng sa ho fana ka matla a ka ntle (3.5…5.0 VDC), haeba FireSting®-O2 e sa lokela ho tsamaisoa ka koung ea USB. The transmit and receive pins of
UART-interface e fanoa ho pins 4 (TXD) le 5 (RXD) (protocol ea puisano ka kopo). Ha u sebelisa UART-interface ho kgothaletswa ho hokahanya pin 3 (/USB_DISABLE) ho pin 1 (GND), e thibelang sebopeho sa USB.
Pin 6 (/PAUSE_BROADCAST) le Pin 7 (/TRIGIN) li amana le seo ho thoeng ke "mokhoa oa phatlalatso" o ka hlophisoang ho software ea taolo ea PC (mohlala, Pyro Workbench kapa Pyro Developer Tool). Nakong ea mokhoa oa ho phatlalatsa, sesebelisoa se iketsetsa litekanyo tsa nako le nako tse ka baloang ho tsoa ho liphello tsa analoge kapa molaetsa oa mongolo o fetisitsoeng ka sebopeho sa USB / UART. Bakeng sa lintlha tse ling, sheba bukana ea software ea taolo e fapaneng ho protocol ea puisano (e fumaneha ka kopo).
Pin 7 (/TRIGIN) e sebetsa joalo ka mokhoa oa ho qala mokhoa oa khaso. Hlokomela, khetho ea "Enable Trigin" e tlameha ho lumelloa ho litlhophiso tsa khaso ho software ea taolo. Nako le nako ha phini ena e hoketsoe ho pin 1 (GND) ebe tekanyo e eketsehileng ea khaso e ea hlahisoa.
Pin 6 (/PAUSE_BROADCAST) e sebetsa joalo ka sesebelisoa se ka sehloohong sa mokhoa oa khaso. Ha feela phini ena e tlameletsoe ho pin 1 (GND), joale mokhoa oa khaso o emisoa. Ha ho litekanyo tsa khaso ea nako le nako, kapa litekanyo tse qalisoang tsa khaso tse etsoang.
| Pin | Lebitso | Mosebetsi | Tlhaloso |
| 1 | GND | Matla | Fatše |
| 2 | VCC | Matla | Phepelo ea motlakase, 3.5V ho isa ho 5.0V DC max. 70 mA (mofuta. 40 mA) |
| 3 | /USB_TLOA | Input ea dijithale | Hokela ho GND bakeng sa ho tima sebopeho sa USB |
| TXD | Digital Output (UART TX) | Khokahano ea UART e nang le maemo a 3.3V (mamello ea 5V), sekhahla sa baud 115200, data bits tse 8, 1 stop bit, ha ho tekano, ha ho ho ts'oarana ka letsoho | |
| ‘ | RXD | Kenyo ya Dijithale (UART RX) | Khokahano ea UART e nang le maemo a 3.3V (mamello ea 5V), sekhahla sa baud 115200, data bits tse 8, 1 stop bit, ha ho tekano, ha ho ho ts'oarana ka letsoho |
| 6 | /PAUSE_ BAKATSA | Digital Input (OV kapa 3.3V, e huleloa ka hare ho fihla ho 3.3V) | Hokela ho GND bakeng sa ho emisa tšebetso efe kapa efe ea mokhoa oa khaso. |
| 7 | /TRIGIN | Digital Input (OV kapa 3.3V, e huleloa ka hare ho fihla ho 3.3V) | E etsa hore ho be le tekanyo ea khaso nako le nako, ha phini ena e tlameletsoe ho GND. |
6.2 Sehokelo X2 (Analog Output)
Sehokelo X2 se fana ka liphetho tse 4 tsa analoge tse nang le mefuta e fapaneng ea 0-2.5V DC ka qeto ea li-bits tse 14 (sheba tafole e ka tlase). Sheba buka ea Pyro Workbench mokhoa oa ho lokisa liphello tsa analog.
| Pin | Lebitso | Mosebetsi | Tlhaloso |
| 1 | GND | Fatše | |
| 2 | AO _A | Sehlahisoa sa Analog (0 - 2.5 V DC) (14-bit resolution) | Analog Output Port A (hape e 'ngoe ea alamo ea digital) |
| 3 | AO_B | Sehlahisoa sa Analog (0 - 2.5 V DC) (14-bit resolution) | Boema-kepe ba Analog Output (hape ke alamo ea dijithale e hlahisoang) |
| 4 | AO_C | Sehlahisoa sa Analog (0 - 2.5 V DC) (14-bit resolution) | Analog Output Port C (e 'ngoe e ka hlahisoang ke alamo ea dijithale) |
| 5 | AO_D | Sehlahisoa sa Analog (0 - 2.5 V DC) (14-bit resolution) | Analog Output Port D (hape e 'ngoe e hlahisoang ke alamo ea dijithale) |
LIEKETSENG TS'OANELO
| Sebopeho | Tlhaloso |
| Litekanyo | 68 x 120 x 22 mm (matlo) 78 x 120 x 24 (kakaretso) |
| Boima ba 'mele | ka. 290 g |
| Sehokedi | '3% 2.0 |
| Phepelo ea motlakase | E tsamaisoa ke USB (max 50mA ho 5V) |
| Sistimi ea ts'ebetso e tšehelitsoeng | Windows 7. 8 |
| Mocheso oa ho sebetsa | 0 ho ea ho 501 |
| Max. mongobo o lekanyelitsoeng | maemo a sa kolekeng |
| Boema-kepe ba sensor ea Optical | 1. 2. kapa 4 (ho ipapisitse le mohlala) |
| Li-sensor tsa Optical | potefolio e felletseng ea sensor ea PyroScience bakeng sa 02 & T |
| Sehokelo sa sensor ea Optical | fiber-optic ST-plug |
| Max. sample sekhahla | ka. 10 samphanyane ka motsotsoana (ho ipapisitse le Litlhophiso) |
| Boema-kepe ba mocheso oa kantle Range. Qeto. Ho nepahala | Ke kanane bakeng sa 4-terata Pt100 -301 ho 1501. 0.021, ±0.51 |
| Ka hare mocheso sensor Range. Qeto. Nepa- | -40 ho 1251. 0.01T, ±0.31 |
| Ka hare khatello ea maikutlo Range. Qeto. Ho nepahala | 300 ho isa ho 1100 mbar. 0.1 mbar. mofuta. ± 3 mbar |
| Ka hare ho sensor ea mongobo Range. Qeto. Ho nepahala | 0 ho 100% rel. mongobo (RH). 0.04% RH. mofuta. ±0.2% RH |
| Sehokelo sa dijithale boema-kepeng ba XI (7 pins) | UART e nang le maemo a 3.3V (e mamellang 5V). Lik'hilograma tse 115 200. 8 likotoana tsa data. 1 ema hanyane. ha ho tekano. ho se tsukutlane ka letsoho |
| Sehokelo sa plug ea X1 | Phoenix Contact, ntho ea No. 1778887 |
| Tlhahiso ea analog (liteishene tse 4) boema-kepeng ba X2 (lipini tse 5) | 0 ho 2.5 VDC 14-bit qeto |
| Sehokelo sa plug ea X2 | Phoenix Contact, ntho ea No. 1778861 |
7.1 Litekanyo tsa Mount Hole tsa limithara tsa FireSting®
Litaelo tse qaqileng tsa ho sebelisa Pyro Workbench le ts'ebeliso ea oksijene ea optical le li-sensor tsa mocheso:
- bukana ea software ea logger "Pyro Workbench" (Windows)
- libuka tsa li-sensor tsa optical tse tsoang ho PyroScience (oksijene, mocheso)
LITEMOSO LE TATAISO EA TŠIRELETSO
Pele u sebelisa FireSting®-O2 le li-sensor tsa eona, bala ka hloko litaelo le libuka tsa basebelisi.
Haeba ho na le mathata kapa tšenyo, khaola sesebelisoa 'me u se tšoaee ho thibela tšebeliso e 'ngoe hape! Sheba PyroScience bakeng sa keletso! Ha ho na likarolo tse sebetsang ka har'a sesebelisoa. Ka kopo hlokomela hore ho bula ntlo ho tla hlakola waranti!
FireSting®-O2 ha e na metsi, e na le kutloelo-bohloko ho maemo a senyang le ho fetoha ha mocheso o bakang condensation. Qoba boemo bofe kapa bofe (mohlala, khanya ea letsatsi) e bakang mocheso oa sesebelisoa ka holimo ho 50°C (122°F) kapa ka tlaase ho 0°C (32°F). Qoba mongobo ofe kapa ofe o phahameng o bakang maemo a condensing.
Tšoara li-sensor ka tlhokomelo haholo-holo ka mor'a ho tlosoa ha cap e sireletsang! Thibela khatello ea kelello ho ntlha e robehileng ea kutlo! Thibela likotsi ka li-sensor tsa mofuta oa nale!
Khatiso le ts'ebeliso ea li-sensor li matsohong a mosebelisi, hammoho le ho nkuoa ha data, kalafo le phatlalatso!
Li-sensor tsa optical le meter FireSting®-O2 ha lia etsetsoa merero ea bongaka, tlhahlobo, kalafo, kapa sesole kapa lits'ebetso tse ling tsa bohlokoa tsa polokeho. Li-sensor ha lia lokela ho sebelisoa bakeng sa ts'ebeliso ea batho mme ha lia lokela ho kopana ka kotloloho le lijo tse reretsoeng ho jeoa ke batho.
FireSting®-O2 le li-sensor tsa optical li lokela ho sebelisoa ka laboratoring ke basebetsi ba nang le tsebo feela, ho latela litaelo tsa mosebedisi le tataiso ea tšireletso ea bukana, hammoho le melao le tataiso e nepahetseng bakeng sa tšireletso ka laboratoring!
Boloka lisensara le mithara ea fiber-optic FireSting®-O2 moo bana ba ka fihlang teng!
TS'ELISO
PyroScience GmbH
Kackertstraße 11
52072 Aachen
Deutschland
Mohala: +49 (0)241 5183 2210
Fax: +49 (0)241 5183 2299
info@pyroscience.com
www.pyroscience.com
Litokomane / Lisebelisoa
 |
pyroscience FireSting-O2 Optical Oxygen Meter [pdf] Bukana ea Mosebelisi FireSting-O2 Optical Oxygen Meter, FireSting-O2, Optical Oxygen Meter, Oxygen Meter, Meter |