Pyle PIC8E In-Wall In-Ceiling Speaker System

Selelekela

Rea u amohela lefatšeng la melumo e tebileng ka Pyle PIC8E In-Wall In-Ceiling Speaker System. E etselitsoe ho tlisa libaesekopo le boiphihlelo ba konsarete hantle ka phaposing ea hau ea ho phomola, libui tsena li fetola li-audiophiles le bamameli ba tloaelehileng.

Ho se ho fetile matsatsi a libui tse matla tse nkang sebaka sa bohlokoa sa fatše. Ka libui tsa Pyle tse entsoeng ka bokhabane tse leboteng/ka har'a siling, u ka natefeloa ke molumo oa boleng bo holimo ntle le bohlasoa, ha u ntse u eketsa bokhabane mokhabisong oa hau. E etselitsoe ho fana ka ts'ebetso ea sonic e ke keng ea lekanngoa, libui tsena li ithorisa ka likarolo tse ngata tse tla phahamisetsa boiphihlelo ba hau ba ho mamela molumo ho ea holimo.

8'' Ts'ebetso e Phahameng ka har'a Lebota / Libui tsa Siling tse Dual 2-Way stereo speaker System, (300 Watt) (Pair)

Likaroloana

• Libui tse Tšebetso tse peli tse Phahameng
• Ka hara Lebota / Sistimi e ka hare-hare
• 2-Way Full Range stereo Sound
• Mounts Flush Maboteng kapa Ceilings
• Mofuta o Felletseng oa Poly Cone oa Mid-Bass
• Pivoting Voice Coil Tweeters
• Phetoho e feto-fetohang ea Treble Control
• Hardware e kopantsoeng ea Mounting
• Kaho ea ABS e Sebeletsang Tikoloho
• E nepahetse bakeng sa Litlhophiso le Lits'ebetso tse Tloaelehileng

Se ka Lebokoseng

• (2) 8'' -inch Libui
• Mounting Cut-Out template

Boholo / Litekanyo

• Kakaretso ea Sebui Diameter: 10.6 '' -inch
• Bophahamo ba ho Khaoha: 9.4'' lisenthimithara
• Kakaretso ea Botebo ba Sebui: 3.9'' -inch
• Botebo ba ho Palama: 3.7'' lisenthimithara

Litlhaloso tsa Tekheniki

• Motlakase: 300 Watt MAX (150 Watt RMS)
• Mofuta oa Sebui: 8'' -inch Poly Cone, Mid-Bass
• Mofuta oa Tweeter: 1'' -inch Silk Dome, Pivoting
• Taolo e Fetohang ea Treble (+3dB, 0, -3dB)
• Hangata karabelo: 35Hz-20kHz
• Boikutlo: 88dB
• Tšusumetso: 8Ohm
• lintho tse bonahalang: Engineered ABS, UFLC (Urethane Film Laminated Cloth)
• Boima ba Sebui se le Mong: 3.3 lbs (-E 'ngoe le e 'ngoe)
• E rekisoa e le: Para

Litaelo tsa ho Eketsoa

1. Khaola drywall.
   Ela hloko: Kamehla lumella bonyane halofo ea inch pakeng tsa stud ea lebota le "speaker cutout" kapa li-tab tsa ho notlela li ke ke tsa khona ho suthela sebakeng.
2. Kopanya lithapo tsa sebui le sebui.
3. Hlakola e 'ngoe le e 'ngoe ea li-screws tse 'nè tsa hlooho ea Phillips. Li-tab tsa ho notlela li tla pota-pota sebakeng sa tsona ebe li sireletsa yuniti karolong e ka morao ea drywall. Kenya likotoana tsa sekhomaretsi ho tiisa grille.
4. Kenya sebaka sa grille ea tšepe.

Litlhaloso

• Mofuta oa sebui: 8-inch Poly Cone, Mid-Bass
• Khokahano: Coaxial
• Tekanyetso ea Matla: Matla a 300-Watt Peak
• Hangata Karabo: 35Hz-20KHz
• Kutloisiso: 88db
• Tšitiso: 4-8 Ohms
• Boholo ba Sehlahisoa: 22.8 x 5 x 11.8 lisenthimithara
• Boima ba Ntho: 3.3 liponto

Mokhoa oa ho Sebelisa

1. Kemiso: Sebelisa thempleite ea sehiloeng e ntseng e phahama e fanoeng ho tšoaea matheba leboteng kapa siling moo u lakatsang ho kenya libui.
2. Wiring: Hang ha masoba a khaotsoe, tsamaisa lithapo tsa sebuela-pele 'me u li hokele ho li-terminals tsa sebuela-pele.
3. Mount the Speakers: Sireletsa libui ka likoting tse sehiloeng ka lisebelisoa tse kentsoeng tse kentsoeng.
4. Fetola Litlhophiso: Sebelisa li-treble control tse fetolehang ho lokisa molumo oa hau oa molumo.
5. Teko: Bulela mohloli oa molumo o hokahaneng ho leka libui.

Tlhokomelo le Tlhokomelo

Ho hloekisa

1. Ho roala lerole: Sebelisa lesela le bonolo, le omeletseng la microfiber ho tlosa lerōle la libui.
2. Tlhoekiso e Tebileng: Bakeng sa litšila tse manganga le matheba, sebelisa hanyenyane dampLesela le koetsoeng, empa etsa bonnete ba hore ha ho na metsi a kenang ka har'a lesoba.

Boemo ba Sebui

1. Moea oa moea: Netefatsa hore sebaka se potolohileng sebui se na le moea o lekaneng ho thibela mocheso o feteletseng.
2. Tšireletso ea Boemo ba Leholimo: Tsena ke libui tsa ka tlung, kahoo qoba ho li beha maemong a mocheso kapa mongobo o feteletseng.

Wiring le Mahokelo

1. Licheke tsa Kamehla: Nako le nako hlahloba hore na ha ho na lithapo tse robehileng kapa likhokello tse hlephileng ebe u rarolla mathata ana hang-hang.
2. Tsamaiso ea Cable: Boloka lithapo li hlophisitsoe ka makhethe ho thibela ho khoptjoa le ho thekesela, e leng se ka lebisang ho senyehileng.

Lisebelisoa tsa Firmware

1. Boloka sistimi ea libui e nchafalitsoe ka firmware ea morao-rao, haeba e hlokahala, bakeng sa ts'ebetso e nepahetseng.

Tlhokomelo ea Tšireletseho

Tšireletseho ea Motlakase

1. Matla Off: Kamehla tima 'me u ntše polaka mochining oa sepikara pele o hloekisa kapa o lokisa.
2. Potoloho e Khutšoane: Netefatsa hore lithapo tsa sebuela-pele ha li tšoarane ha tsamaiso e tsamaisoa ho qoba lipotoloho tse khutšoane.

Ho kenya

1. Thuso ea Setsebi: Bakeng sa lisebelisoa tse ka har'a lebota kapa ka har'a siling, ho khothaletsoa haholo ho fumana thuso ea litsebi ho qoba mathata afe kapa afe a meralo kapa a motlakase.
2. Sesebelisoa sa Ts'ireletso: Haeba u inkela libui ka bouena, latela melaoana e nepahetseng ea polokeho ea lisebelisoa kamehla.

Bana le Liphoofolo

1. Likotsi tsa ho Bitsoa: Beha likaroloana tse nyane, joalo ka likurufu, moo bana le liphoofolo tse ruuoang lapeng li ka fihlang ho tsona.
2. Taba ea Bohelehele: Etsa bonnete ba hore lithapo le likarolo tsa sebuela-pele ha li fihlellehe habonolo ho bana le liphoofolo tse ruuoang lapeng ho qoba likotsi kapa tšenyo.

Maemo a Audio

1. Ho Mamela ka Polokeho: Qoba ho ipeha kotsing ea molumo o phahameng oa molumo ka nako e telele ho thibela tšenyo ea kutlo.
2. Qala ka Tlase: Kamehla qala ka molumo o tlase 'me butle-butle o e phahamise ho isa boemong bo botle ba ho mamela.

Trubleshooting

Ha ho na Molumo kapa Molumo o tlase

1. Sheba Lihokelo: Etsa bonnete ba hore lithapo tsohle le lithapo li hoketsoe ka mokhoa o sireletsehileng ho li-terminals tse loketseng.
2. Taolo ea Molumo: Netefatsa hore molumo oa sesebelisoa se hokahaneng (mohlala, amplifier, receiver) e behiloe boemong bo utloahalang.
3. Mohloli oa Boitsebiso: Etsa bonnete ba hore mohloli oa molumo o sebetsa hantle. Lekola mohloling o mong haeba ho khonahala.

Molumo o sothehileng

1. Maemo a Molumo: Haeba molumo o phahame haholo, o ka etsa hore molumo o sothe. Leka ho theola molumo.
2. Sheba Litšitiso: Etsa bonnete ba hore ha ho letho le sitisang likhoune tsa sebui.
3. Audio Format: Etsa bonnete ba hore sebopeho sa molumo oa mohloli oa boitsebiso o lumellana le tsamaiso ea libui tsa hau.

Sebui se Buzzing kapa Ho Humming

1. Tšitiso ea Motlakase: Netefatsa hore libui ha li haufi le lisebelisoa tse ling tsa motlakase tse ka bakang tšitiso.
2. Ho thethefatsa: Etsa bonnete ba hore likarolo tsohle li thehiloe hantle.

Mathata a Bluetooth kapa a Khokahano (haeba ho hlokahala)

1. Ho kopanya: Netefatsa hore sebuela-pele se boemong ba ho palama 'me se sebakeng se ka amohelang sebui sa hau sa Bluetooth.
2. Tšitiso: Lisebelisoa tse ling tsa elektroniki li ka kena-kenana le matshwao a Bluetooth. Li tlose 'me u leke hape.
3. Software Update: Etsa bonnete ba hore sebuela-pele le sesebelisoa sa Bluetooth li na le software/firmware ea morao-rao.

Mathata a Kamohelo ea Radio

1. Antenna: Etsa bonnete ba hore lenakana (haeba le sebetsa) le atolositsoe ka botlalo kapa le hokahane hantle.
2. Sebaka: Leka ho isa sistimi ea libui libakeng tse fapaneng ho fumana kamohelo e ntle.
3. Tšitiso: Qoba hole le lisebelisoa tse ling tsa elektroniki tse ka bakang tšitiso.

Remote Control Ha e sebetse

1. Betri: Etsa bonnete ba hore libeteri li ncha ebile li kentsoe ka nepo.
2. Mohala oa Pono: Netefatsa hore ha ho letho le sitisang tsela pakeng tsa remote le sensor ea IR ea sebui.

Sebui se ke ke sa Bulela

1. Phepelo ea motlakase: Etsa bonnete ba hore sistimi ea libui e hoketsoe ka har'a sesebelisoa sa motlakase se sebetsang.
2. Konopo ea Matla: Netefatsa hore o tobetse konopo ea matla 'me li-switches tse hlokahalang li behiloe sebakeng sa 'On'.
3. Fuse: Lekola hore na sebui sa hau se na le fuse e ka nkeloang sebaka ke mosebelisi e ka 'nang eaba e butsitse. Haeba ho joalo, e nkele sebaka ka fuse e loketseng joalokaha ho boletsoe bukeng ea litaelo.

Haeba o ntse o na le mathata kamora ho leka mehato ena ea ho rarolla mathata, e kanna ea ba nako ea ho sheba bukana ea mosebelisi bakeng sa litaelo tse ling kapa ikopanye le tšebeletso ea bareki ba Pyle bakeng sa thuso e tsoetseng pele.

Mabapi le Pyle

Ho tloha bofelong ba lekholo la bo20 la lilemo, Pyle esale e le lebitso le tsebahalang indastering ea molumo, qalong e ne e sebetsa ka mokhoa o ikhethileng oa molumo oa koloi. Ho theosa le lilemo, k'hamphani e 'nile ea ikamahanya le likarolo tse fapaneng, ho kenyeletsoa molumo oa lapeng, molumo oa litsebi le molumo oa metsing, e fana ka libui tse ngata tse khahlang, amplifiers, litsamaiso tsa PA, le tse ling. Hore na o ka koloing ea hau, lapeng, kapa studio, Pyle e ikemiselitse ho u fa molumo oa boleng bo holimo o ntlafatsang boiphihlelo ba hau ba molumo.

RE Etele MORAO

O na le potso? U hloka tšebeletso kapa tokiso? U batla ho siea maikutlo? PyleUSA.com/ContactUs

FAQs

A na nka sebelisa libui tsee bakeng sa ho kenya ka ntle?

Pyle PIC8E e etselitsoe tšebeliso ea ka tlung. Ha li mamelle boemo ba leholimo 'me ha lia lokela ho sebelisoa ka ntle.

Na ke sepikara sa Bluetooth?

Che, Pyle PIC8E ke sistimi ea sebui e nang le terata ka har'a lebota / siling.

Na libui li rekisoa ka bonngoe kapa ka bobeli?

Pyle PIC8E e rekisoa ka bobeli.

Na ho hlokahala hore ho kenngoe setsebi?

Le hoja ho ka khoneha hore u iketsetse libui tsena ka bouena haeba u le teng, ho khothaletsoa ho kenya libui ho netefatsa boleng bo nepahetseng ba molumo le polokeho.

Ke bokae ba sehiloeng bakeng sa ho kenya?

Litekanyo tse sehiloeng ke 4.13 inches x 11.02 inches.

Maqhubu a karabelo ke afe?

Maqhubu a karabo ea maqhubu ke 35Hz-20KHz.

Matla a phahameng a tlhahiso ke afe?

Matla a phahameng a tlhahiso ke li-watts tse 300.

Ke lokela ho etsa eng haeba ho se na molumo?

Ntlha ea pele, hlahloba likhokahano tsohle tsa terata 'me u netefatse hore amplifier/receiver e buletsoe 'me e behiloe hantle. Ea bobeli, etsa bonnete ba hore molumo o behiloe boemong bo utloahalang.

Seo u lokelang ho se etsa haeba molumo o sothehile?

Sheba ho bona hore na molumo o phahame haholo mme o baka ho sotha. Hape, etsa bonnete ba hore likhokahano tsohle li bolokehile.

Ke hloekisa li-grill tsa libui joang?

U ka hlakola li-grill tsa sebui ka bonolo ho tlosa lerōle kapa ua li hlakola hanyenyane ka lesela le omeletseng.

A na ho na le litebelo tse khethehileng tsa tšireletso?

Etsa bonnete ba hore o tima lisebelisoa tsohle tse hoketsoeng le ho li ntša sehokelong sa motlakase nakong ea ho instola kapa ha o hokela lithapo.

Na taolo ea treble e ka lokisoa?

Ee, libui li na le taolo e feto-fetohang ea treble ho thusa ho fana ka molumo o felletseng haholoanyane, o nonneng.

Litšupiso

• Bukana ea Mosebelisi