PULSEWORX KPLD6 Keypad Load Controllers
MOSEBETSI
Letoto la "Keypad Load Controller Series" ke "Keypad Controller" e le 'ngoe le Light Dimmer / Relay ka har'a sephutheloana se le seng. Ba khona ho fetisa le ho amohela litaelo tsa dijithale tsa UPB® (Universal Powerline Bus) holim'a mohala o teng oa motlakase ho bulela, ho tima, le ho fifatsa lisebelisoa tse ling tsa taolo ea UPB ba le hole. Ha ho hlokahale lithapo tse ling hape ha ho matshwao a maqhubu a radio a sebediswang bakeng sa puisano.
Mehlala
KPL e fumaneha ka mefuta e 'meli e fapaneng: KPLD Dimmer e na le dimmer e hahiloeng ka 400W mme KPLR Relay ke mofuta oa relay o khonang ho sebetsana le 8. Amps. Ka bobeli li ka kenngoa ka lebokoseng leha e le lefe la lebota le nang le lithapo tsa neutModelsral, line, load le fatše. Mebala e fumanehang ke White, Black, le Light Almond.
Likonopo tse Betliloeng
Li-KPL's li na le likonopo tse khantšoang ka morao tse ngotsoeng ka mabitso a: A, B, C, D, Off, le Motsu oa Holimo le oa Tlase. Likonopo tsa Custom Engraved li teng tse u nolofalletsang ho hlophisa konopo e 'ngoe le e' ngoe bakeng sa tšebeliso ea eona. Sheba https://laserengraverpro.com tlhahisoleseding ea ho laela.
BOHLOKOA POLOKETSO LITAELO
Ha o sebelisa lihlahisoa tsa motlakase, mehato ea ts'ireletso ea mantlha e lokela ho lateloa kamehla, ho kenyelletsa le tse latelang:
- BALA LE HO LATELA DITAELO TSOHLE TSA POLOKETSO.
- Ipolokele hole le metsi. Haeba sehlahisoa se kopana le metsi kapa metsi a mang, tima mochine oa potoloho 'me u ntše sehlahisoa hang-hang.
- Le ka mohla u se ke ua sebelisa lihlahisoa tse theohileng kapa tse senyehileng.
- Se ke oa sebelisa sehlahisoa sena ka ntle.
- Se ke oa sebelisa sehlahisoa sena molemong o mong ntle le morero oa sona.
- U se ke ua koahela sehlahisoa sena ka thepa leha e le efe ha e sebelisoa.
- Sehlahisoa sena se sebelisa li-plug le li-sockets (lehare le le leng le leholo ho feta le leng) ho fokotsa kotsi ea ho tsosoa ke motlakase. Li-plug le li-sockets tsena li lekana ka tsela e le 'ngoe feela. Haeba li sa tšoanelehe, buisana le setsebi sa motlakase.
- BOLOKANG LITAELO TSENA.
KEKETSO
Li-Keypad Load Controllers li etselitsoe tšebeliso ea ka tlung. Ho kenya mojule oa KPL ka lebokoseng la lebota latela litaelo tsena:
- Pele o kenya KPL ka lebokoseng la lebota, etsa bonnete ba hore matla a lebokoseng la lebota a khaotsoe ka ho ntša fuse kapa ho tima sekhechana sa potoloho. Ho kenya dihlahiswa ha motlakase o ntse o le teng ho ka o pepesetsa voltage mme e ka senya sehlahisoa.
- Tlosa lebota le lisebelisoa life kapa life tse teng leboteng.
- Sebelisa terata ho hokela ka mokhoa o sireletsehileng terata e tšoeu ea KPL ho terata ea “Neutral”, terata e ntšo ea KPL ho terata ea “Mola” le terata e khubelu ho terata ea “Moroalo” (sheba setšoantšo se ka tlase).
- Kenya KPL ka har'a lebokose la lebota 'me u sireletse ka li-screws tse holisang. Kenya wall plate.
- Khutlisa matla ho sekhechana sa potoloho
TIISETSO
Hang ha KPL ea hau e kentsoe e ka hlophisoa ka letsoho kapa ka UPStart Configuration Software Version 6.0 haha 57 kapa ho feta.
Sheba Tataiso ea Litlhophiso tsa Keypad Controller e fumanehang ho PCS websaete bakeng sa lintlha tse ling ho Manual
tlhophiso ea ho kenya sesebelisoa sa hau sa KPL marang-rang a UPB le ho se hokahanya le lisebelisoa tse fapaneng tsa taolo ea mojaro.
Le hoja ts'ebetso ea kamehla ea feme ea KPL e le molemo haholo maemong a mangata, ho khothaletsoa haholo hore u hlophise KPL ea hau ka Powerline Interface Module (PIM) le UPStart Configuration Software hore e tsoele pele.tage ea likarolo tsa eona tse ngata tse hlophisehang. Litaelo tsa basebelisi lia fumaneha ho rona website, haeba o hloka thuso e eketsehileng mabapi le mokhoa oa ho lokisa tsamaiso ea hau.
SETUP Mokhoa
Ha o lokisa sistimi ea UPB, ho tla hlokahala ho beha KPL mokhoeng oa SETUP. Ho kenya Setup Mode, ka nako e le 'ngoe tobetsa le ho tšoara likonopo tsa ON le OFF metsotsoana e 3. Lipontšo tsohle tsa LED li tla panya hang ha sesebelisoa se le ho SETUP mode. Ho tsoa ho SETUP mode, hape ka nako e le 'ngoe tobetsa le ho tšoara likonopo tsa ON le OFF ka metsotsoana e 3 kapa ema metsotso e mehlano hore nako e felile. Ho Fetola Maemo a Leseli a Preset ea Scene Batsamaisi ba etselitsoe ka ho khetheha ho sebetsa le lisebelisoa tse ling tsa PulseWorx® Lighting System. Konopo e 'ngoe le e' ngoe ho balaoli bana e lokiselitsoe ho kenya tšebetsong Preset Light Level le Fade Rate e bolokiloeng ka har'a lisebelisoa tsa PulseWorx. The Preset Light Levels e ka fetoloa habonolo ka ho latela mokhoa ona o bonolo:
- Tobetsa konopo ho Controller ho kenya ts'ebetso ea Preset Light Levels (sebaka) e bolokiloeng hona joale ho Wall Switch Dimmer (s).
- Sebelisa sesebelisoa sa rocker sa lehae ho Wall Switch ho seta Boemo bo bocha bo lakatsehang ba Preset Light.
- Ka potlako tlanya konopo ea ho tobetsa ho Controller ka makhetlo a mahlano.
- Mabone a WS1D a tla benya ka lekhetlo le le leng ho bontša hore e bolokile Preset Light Level e ncha.
TS'EBETSO
Hang ha e kentsoe le ho hlophisoa, KPL e tla sebetsa ka litlhophiso tse bolokiloeng tsa tlhophiso. Tlanya hang feela, tlanya habeli, tšoara, kapa u lokolle likonopo ho fetisa taelo e seng e setiloe mohala oa motlakase. Sheba Tokomane ea Specification (e teng bakeng sa ho khoasolla) bakeng sa lintlha tse ling mabapi le ts'ebetso ea letlapa la likonopo. Backlit Pushbuttons E 'ngoe le e 'ngoe ea li-pushbuttons e na le LED e Boputsoa ka mor'a eona ho fana ka mabone a morao le ho bontša ha meroalo kapa lipapali li kenngoe. Ka ho sa feleng, mabone a ka morao aa lumelloa, 'me ho tobetsa konopo ho tla etsa hore e bonese ho feta tse ling.
Fektheri Default Settings
Ho khutlisetsa li-setting tse latelang tsa kamehla beha KPL mokhoeng oa SETUP ebe u tobetsa ka nako e le 'ngoe le ho tšoara likonopo tsa A le D metsotsoana e ka bang 3. Li-indicator li tla khantša ho bontša hore mefokolo ea lifeme e khutlisitsoe
| Netweke 10: | 255 |
| Sehlopha sa ID KPL06: | 67 |
| Unit ID KPLR6: | 68 |
| Netweke Password: | 1234 |
| Fumana Kutloisiso: | Phahameng |
| Palo ea Phetiso: | Habedi |
| Likhetho tsa IR: | N/A |
| Likhetho tsa LED: | Backlight enabled/ E phahameng |
| ON Button: | Khokahanyo ea 1: Kenya tšebetsong |
| Mokhoa oa Konopo: | Khokahanyo ea 3: Kenya tšebetsong |
| Konopo ea B Mokhoa: | Khokahanyo ea 4: Kenya tšebetsong |
| C Boemo ba Konopo: | Khokahanyo ea 5: Kenya tšebetsong |
| O Mode oa Konopo: | Khokahanyo ea 6: Kenya tšebetsong |
| TIMA Konopo Mokhoa: | Khokahanyo ea 2: Kenya tšebetsong |
| Boemo ba Konopo ea UP: | Sehokelo sa ho qetela: Konopo e Khanyang |
| ON Konopo Mode: | Sehokelo sa ho qetela: Dim Button |
| Khokahanyo ea Litlhophiso tsa Laed 1 | KPLD / KPLR 100% / 100% |
| Load Settings link 2 | 0%/0% |
| load Settings link 3 | 80%/100% |
| Khokahanyo ea Litlhophiso tsa Laed 4 | 60%/100% |
| Load Settings link S | 40% / 100% |
| Load Settings link 6 | 20% / 100% |
TIISETSO MOEKETSI
Morekisi o fana ka tumello ea hore sehlahisoa sena, haeba se sebelisoa ho ea ka litaelo tsohle tse sebetsang, hore se se be le bofokoli ba mantlha ba thepa le moetso oa nako ea lilemo tse hlano ho tloha ka letsatsi la theko. Sheba lintlha tsa tiisetso ho PCSwebsebaka (www.pcslighting.com) bakeng sa lintlha tse hlakileng.
19215 Parthenia St. Suite D
Northridge, CA 91324
P: 818.701.9831
pcssales@pcslighting.com
www.pcslighting.com
https://pcswebstore.com
Litokomane / Lisebelisoa
 |
PULSEWORX KPLD6 Keypad Load Controllers [pdf] Tlhophiso Tataiso KPLD6, KPLR6, KPLD6 Keypad Load Controllers, KPLD6, Keypad Load Controllers, Load Controllers, Controllers |
