Centrifuge

Mohlala oa XC-2000
Buka ea Ts'ebetso

Pele o sebelisa sehlahisoa sena, ka kopo bala bukana ena ka hloko ho ithuta ka likarolo tse fumanehang ho fumana liphetho tse ntle tsa sesebelisoa sena.
Tlhokomeliso: Ho thibela kotsi ea mollo kapa tšabo, u se ke ua pepesetsa yuniti ena pula kapa mongobo. Ntle le haeba ho ngotsoe ka tsela e 'ngoe, thepa ena e lokela ho sebelisoa le AC 110V 60Hz USA kapa Canada.
220V 50Hz e fumaneha e le Mohlala No. XC-2000-220
Tlhokomeliso: Ha ho likarolo tse ka sebelisoang ke mosebelisi kahare. Lebisa litšebeletso ho basebeletsi ba tšebeletso ba tšoanelehang

Polokeho

Pele o sebelisa centrifuge, ka kopo bala bukana ena ea litaelo ka hloko. Tšebeliso e fosahetseng kapa e sa nepahalang e ka baka tšenyo ea thepa kapa kotsi ea motho!

Setsi sena se etselitsoe meriana ea bongaka, baeloji, boenjiniere ba lefutso, immunology, joalo-joalo.ampLe ha e khone ho feta 1.2g/cm³ tlas'a lebelo le phahameng, ha boima ba sample ho feta 1.2g / cm³, lebelo le phahameng la rotor le tlameha ho fokotsoa ho latela.

Ha centrifuge e ntse e sebetsa (rotor e ntse e bilika), Ka kopo boloka sebaka se ka bang lisenthimithara tse 12 ho pota-pota centrifuge e hlakile ha u ntse u e sebetsa 'me u netefatse hore ha ho letho le thibelang maqhubu.
Ho qoba kotsi ho basebetsi le kapa ho arohana samphanyane ka hare ho yuniti; u se ke ua sebelisa lisebelisoa tse latelang ho centrifuge:

• Lisebelisoa tse tukang le tse qhomang
• Lisebelisoa tse matla tsa lik'hemik'hale
• Lintho tse chefo kapa tse chefo

Litaba

Nomoro	Lebitso	Qty	Hlokomela
1	Centrifuge	1 sete
2	Rotor (e kenyelelitsoe) Bokhoni = 10-15mL x 6 tube batshoaro	1 2 likhomphutha	(tse tšeletseng li kenyelelitsoe ka hare ho yuniti & tse ling tse tšeletseng)
3	Li-cushions tsa li-silicone tse ntšo	6 pc
4	Fuse	1 pc	4 AMP
5	Bukana ea ts'ebetso	1 pc

 Ha u e fumana, ka kopo, hlahloba sephutheloana, haeba ho na le phoso, ka kopo ikopanye le morekisi oa hau hang hang.

Lisebelisoa

Haeba o hloka likarolo tse ling tse tla u thusa, ka kopo ikopanye le k'hamphani ea rona kapa barekisi ba lumelletsoeng.

Ntho #01	Tlhaloso	Palo ea Likotoana	Setšoantšo
EA-06-XC	Tube e ncha batshoaro	Sehlopha sa li-pcs tse 6

Litlhaloso

Mosebetsi/ Paramethara	Lintlha tsa Tekheniki
Tikoloho ya tshebediso	♦ Sebaka se hloekileng, se omeletseng le se bataletseng ♦ Sebaka se tsitsitseng sa mosebetsi ♦ Bophahamo: ♦ Mongobo o amanang:≤80%
Ambient Mocheso	♦ +5°C∼-40°C
E sebetsang Moqtage	♦ AC110V 60Hz (kapa 220V 50Hz-220 Model Feela)
Ho beha Nako Range	♦ 1∼60mins
Boholo ba RPM	♦ 4000 r/min
Boholo bo amanang le centrifugal matla (RCF)	♦ 1000 rpm- 112 RCF ♦ 1500 rpm- 252 RCF ♦ 2000 rpm- 447 RCF ♦ 2500 rpm- 699 RCF ♦ 3000 rpm- 1006 RCF ♦ 3500 rpm- 1370 RCF ♦ 4000 rpm- 1790 RCF
Bolelele ba rotor	♦ 5 cm
Radius	♦ 10 cm
Boholo ba bokhoni	15ml x6
Lerata (lebelo le phahameng haholo)	♦ ≤70dB
Litekanyo (mochini)	♦ 11 x 11.5 x 10 in. (28 x 29 x 25 cm.)
Boima bo kahare	♦ lik'hilograma tse 9
Litekanyo (sephutheloana)	♦ 12 x 12 x 11 in. (32 x 32 x 28 cm.)
Boima bo felletseng	♦ lik'hilograma tse 11

Lintlha tsa Ts'ebetso

• Etsa bonnete ba hore rotor e tiisitsoe pele u sebelisa centrifuge.
• U se ke ua bula sekoahelo ha rotor e ntse e bilika. Lumella centrifuge hore e eme ka ho feletseng pele e leka ho bula sekoahelo le ho tlosa li-tubes tsa mohlala.
• Sebelisa feela ka lisebelisoa tse fanoeng kapa likarolo tse etselitsoeng ho sebelisoa le mofuta ona.
• Se ke oa sebelisa centrifuge ha lemati le butsoe.
• Etsa bonnete ba hore li-tubes tsa mohlala li lekana ebile li leka-lekana. (Li-tubes tse sa leka-lekaneng li tla etsa hore mochine o sisinyehe 'me o se ke oa hlahisa motsamao o boreleli oa ho ohla).
• Pele o sebelisa, hlahloba rotor. Khaotsa ho sebelisa haeba ho na le ho senyeha ho totobetseng kapa matšoao a senya ho rotor.

Lekhotla la taolo

Lekhotla la taolo

Nako LED: Nako ka mots
+ -: eketsa/fokotsa nako/rpm's
Switch: pontsho e nngwe pakeng tsa nako/lebelo
Bula/E tima: matha/emisa

Tlhophiso

1. Bula lebokose 'me u tlose centrifuge ho paka
2. Beha centrifuge sebakeng se bataletseng
3. Bula sekwahelo 'me u tlose sephutheloana sa foam ka hare
4. Hokela thapo ea Motlakase ho tloha ka morao ho yuniti ho ea phepelong ea motlakase, yuniti e tla tima 'me centrifuge ea hau e se e loketse ho sebelisoa.

Ts'ebetso

Phetoho ea Nako

1. Tobetsa "Switch" ho fetola nako ea ho seta. Tobetsa konopo ea "+" kapa "-" ho fetola nako. Ho eketsa nako ea ho matha, tobetsa konopo ea "+" ho fihlela nako e lakatsehang e fihla kapa boholo ba metsotso e 60. (Sheba karolo ea 6.1). Ho fokotsa nako ea ho matha, tobetsa konopo ea "-" ho fihlela nako e lakatsehang e fihla kapa bonyane ba 1 min. (Sheba karolo ea 6.1). Haeba linomoro tse kaholimo ho "TIME LED" li sa Late, etsa bonnete ba hore thapo ea motlakase ea AC e hoketsoe ka botlalo ka har'a sokete.

Ho fetola lebelo

1. Tobetsa konopo ea "SWITCH" hang ho lokisa maemo a lebelo. Nomoro ea linomoro tse 4 haufi le lentsoe “TIME/SPEED LED” e lokela ho fetohela ho rpm's. (Sheba karolo ea 6.1). Haeba linomoro tse kaholimo ho "TIME/SPEED LED" li sa fetohe ho rpm's, tsoela pele ho tobetsa konopo ea "SWITCH" ho fihlela sena se etsahala.
2. Setting ena ea kamehla ea centrifuge bakeng sa lebelo e ho RPM's. Ka kopo, khetha lebelo le lakatsehang (le bontšitsoeng ho RPM's) ka ho sebelisa likonopo tsa motsu "+" kapa "-" ho fihlela phanele ea ponts'o e bala litlhophiso tseo u li batlang.

Spinning Centrifuge

2. Kenya li-tubes tsa centrifuge ka mokhoa o tla leka-lekanya boima ba li-tubes tsa mohlala. Kamehla kenya palo e lekanang ea li-tubes mahlakoreng a fapaneng a rotor ka boholo bo lekanang ba mohlala ka har'a tube ka 'ngoe.

Kaha joale nako e lakatsehang e khethiloe, joale u ka tsamaisa samples.

1. Etsa bonnete ba hore sekoahelo se koetsoe ebile se notletsoe.
2. Tobetsa konopo ea "On/Off", 'me centrifuge e tla qala ho bilika.
3. Ka mor'a hore centrifuge e sebetse bakeng sa nako e hlophisitsoeng ea nako e tla qala ho fokotseha ebe e emisa ka ho feletseng. Ka kopo hlokomela hore sekoahelo ha sea lokela ho buloa ho fihlela centrifuge e emisa ka ho feletseng.

Hlokomela: Sekoaelo sena sa centrifuge se etselitsoe hore se eme ha sekoahelo se butsoe. Haeba u na le mathata a ho sebetsa centrifuge; Ka kopo ikopanye le morekisi oa hau kapa mofani ea lumelletsoeng.

Ha u fumana centrifuge ea hau e ncha
re khothaletsa hore o tlalehe lintlha tse latelang ho li sebelisa nakong e tlang:

Letsatsi la theko/ho amoheloa:________________________________________________
Morekisi: __________________________________________________
Nomoro ea mohala ea morekisi: ___________________________________

Tiisetso

Moetsi o fana ka tumello ea hore sesebelisoa sena se se be le bofokoli ba lintho tse bonahalang le ho sebetsa tlas'a tšebeliso e tloaelehileng bakeng sa selemo sa 1 ho tloha letsatsing la theko. Ha e koahele tšenyo e bakiloeng ke tšebeliso e mpe kapa tšebeliso e mpe, litokiso kapa litokiso tse entsoeng ke litsebi tsa ho lokisa tse sa lumelloeng, kapa tšenyo e bakiloeng ke lipalangoang. Haeba u na le lipotso mabapi le sehlahisoa sena kapa tiisetso, ikopanye le morekisi eo se rekiloeng ho eena. Bakeng sa tšebeletso ea tiisetso, sehlahisoa se lokela ho phutheloa hantle ho qoba tšenyo ea lipalangoang, haholo-holo ka lebokoseng la pele le ho paka. Kenyelletsa aterese ea hau e felletseng ea ho khutlisa le nomoro ea mohala hammoho le tlhaloso ea bothata, letsatsi le sebaka seo u rekileng ho sona, 'me u romelle atereseng e ka tlase. Haeba tlas'a tiisetso e tla lokisoa kapa e nkeloe sebaka ntle ho tefo ebe e khutlisoa. Haeba tšebeliso e mpe, liphetoho, kotsi kapa maemo a sa tloaelehang a ts'ebetso a bakile ho hloleha, khakanyo ea tokiso e tla fanoa bakeng sa tumello ea hau pele mosebetsi o etsoa.
E2 v.2 © 2015

Lekala la Tšebeletso ea Pele
7241 Lekhotla la Gabe
Manassas, VA 20109-2434

Litokomane / Lisebelisoa

Premiere XC-2000 Centrifuge e nang le Nako le Taolo ea Lebelo [pdf] Bukana ea Mosebelisi XC-2000, Centrifuge e nang le Nako le Taolo ea Lebelo

Litšupiso

• Bukana ea Mosebelisi