PEAKMETER Multi-function Wire Tracker

• Kea le leboha ka ho reka Wire Tracker. Ka kopo bala bukana pele u sebelisa Wire Tracker 'me u e sebelise hantle.
• Bakeng sa ho sebelisa Wire Tracker ka polokeho, ka kopo qala ka ho bala tlhaiso-leseling e mabapi le polokeho ka hloko bukaneng.
• Buka ea litaelo e lokela ho bolokoa hantle hore e sebelisoe.
• Boloka letšoao la S / N bakeng sa ts'ebeletso ea kamora ho rekisa nakong ea waranti. Sehlahisoa se se nang lengolo la S / N se tla lefisoa bakeng sa ts'ebeletso ea tokiso.
• Haeba ho na le potso kapa bothata ha u ntse u sebelisa Wire Tracker, kapa tšenyo e etsahetse sehlahisoa, ka kopo ikopanye le Lefapha la rona la tekheniki.

Lintlha tsa polokeho

• Terata tracker e reretsoe ho e sebelisa ho latela melao ea lehae ea ts'ebeliso ea motlakase le ho qoba ho etsa kopo libakeng tse sa sebetseng ts'ebeliso ea li-elektroniki joalo ka sepetlele, seteishene sa khase jj.
• Ho thibela ts'ebetso ea ts'ebetso kapa ts'ebetso, sehlahisoa ha sea lokela ho fafatsoa kapa damped.
• Karolo e pepesitsoeng ea terata ea terata ha ea lokela ho angoa ke lerōle le mokelikeli.
• Se ke oa sebelisa terata ea terata moo mocheso o leng holimo.
• Ka kopo o seke oa sebelisa sesebelisoa sena ho fumana mehala ea motlakase (joalo ka likhoele tsa motlakase tsa 220V), ho seng joalo e ka senya sesebelisoa kapa ea kenyelletsa polokeho ea motho.
• Nakong ea lipalangoang le ts'ebeliso, ho kgothaletswa haholo ho qoba ho thulana ka matla le ho thothomela ha mohlahlobi, esere ea senya likarolo le ho baka ho hloleha.
• Terata tracker ha ea lokela ho sebelisoa tikolohong e nang le khase e ka chang habonolo.
• Se ke oa qhaqholla sesebelisoa hobane ha ho na karolo e ka hare e ka lokisoang ke mosebelisi. Haeba ho qhaqhoa ho hlokahala kannete, ka kopo ikopanye le setsebi sa k'hamphani ea rona.
• Sesebelisoa ha sea lokela ho sebelisoa tlasa tikoloho ka tšitiso e matla ea motlakase.

Likaroloana

• Mokhoa oa bobeli oa khoutu ea dijithale, o hana ka tieo lerata le matšoao a bohata, o ts'oara likhoele kapele le ha bonolo.
• Cable tracer le teko ea cable ea UTP ka nako e le 'ngoe.
• Khetholla mofuta oa cable: 100M / 1000M, e otlolohileng / sefapano / tse ling.
• Sesebelisoa sa UTP / STP / RJ45 / RJ11 le tlhahlobo ea ts'ebetso.
• Khetholla boemo mohaleng oa mohala o sebetsang: standby, ringing and off-hook
• Potlakela ho lemoha phoso e haufi le bofelo, bohareng ba bofelo le bofelong ba plug ea cable ea RJ45
• Tšehetso ea boema-kepe ba UTP max 60V e mamella voltage, terata e ka lateloa ka kotloloho mabapi le switjha ea PoE.
• Teko e tsoetseng pele ea thapo e sirelelitsoeng
• PD Power detection: bona hore na tlhahiso ea matla ea switch ea POE e tloaelehile, 'me u bone le lithakhisa tse sebelisetsoang phepelo ea motlakase.
• Ts'ehetsa mokhoa o khutsitseng
• Mabone a mabeli a khanyang a LED bakeng sa ho sebetsa lefifing

Lenane la ho paka

1. Terata tracker emitter
2. Seamohedi sa terata
3. thapo ea RJ45
4. thapo ea RJ11
5. RJ11 cable ea koena ea clip

Sebopeho le Selelekela sa Mosebetsi

Likarolo le mesebetsi ea Emitter:

1. Letšoao la boemo ba mohala
2. Mesebetsi switjha: Scan / UTP, Off, UTP kabel teko
3. Lits'oants'o tsa tatelano / likhahla tsa UTP
4. Letšoao la mofuta oa thapo ea UTP: e otlolohileng / sefapano / tse ling
5. Letšoao la 100M / 1000M
6. Cable tracer mode indicator: Mokhoa o tloaelehileng o motala, mokhoa o sireletsang bofubelu
7. SET: Switjha mosebetsi sirelelitsoe kapa unshielded ka kabel tracer mokgwa wa le "ea lehae / hole / fapoha" ka UTP mokgwa wa teko kabel
8. Letšoao la betri
9. BONOLO sesupo sa tsoelo-pele
10. LITLHAKISO TSA BOPHELO / BOPHELO BOPHELO.

Sebopeho se holimo

Sebopeho se letšehali

11. Sebopeho sa BNC
12. Boema-kepe ba UTP / Scan
13. Boema-kepe ba RJ11

Hlokomela: Tlhaloso ea boemo ba mohala:
Ka kopo sebelisa ts'oaetso maemong a OFF. Ho khantša / ho bonesa / ho bonesa ha ponts'o ho tsamaisana le boemo ba boemo ba mohala ba ho emisa / ho lla / ho loka.

Cable tracer (Receiver) Likarolo le mesebetsi:

1. Leseli la LED
2. Sesupo sa Matla
3. UTP cable sequence / signal matla ponts'o Earphone jack
4. Sireletso sa tšireletso ea lera se sirelelitsoeng
5. Koko ea litsebe
6. Boema-kepe ba teko ea cable ea UTP
7. Leseli la lebone la LED
8. Letšoao la 100M / 1000M
9. Phetoho / Kutloahalo ya kutlo
10. MUTE konopo (tobetsa nako e telele ho mode e khutsitseng, tobetsa konopo e khuts'oane ho fumana khokahano ea koung)
11. Letšoao la mofuta oa thapo ea UTP: e otlolohileng / sefapano / tse ling
12. Letšoao la ho tsoela pele la port port (ON e bonts'a ts'ebetso ea khokahano ea thapo ea sebaka sa heno, OFF e bonts'a ts'ebetso ea tatellano ea cable)
13. PD Powered test port (bona hore na tlhahiso ea matla ea li-switch tsa PoE e tloaelehile.)

Hlokomela: Phumano ea khokahano ea kamohelo ea seamohedi e ts'ehetsa feela pheletso ea lehae, ha e tšehetse pheletso e hole. Emitter e ka ts'ehetsa pheletso ea lehae, pheletsong e bohareng le phumano ea koung e hole.

Litaelo tsa kopo ea sehlahisoa

Mohala oa likhoele

Kopanya thapo ea marang-rang koung ea RJ45 ea emitter, hokela cable ea BNC kapa mohala oa mohala oa RJ11 koung ea emitter ea BNC kapa RJ11. Haeba ho se na sehokedi sa cable, se ka sebelisa likoena tsa likoena ho khina terata ea koporo e se nang letho.

1. Fetola switch ea emitter ho "Scan / UTP" mode, tobetsa konopo ea "SET" ho fetohela ho UTP / STP mode. Lebone le letala la sesupo sa "UTP / STP" le bolela mokhoa o tloaelehileng, ha lebone le lefubelu le sirelelitsoe. Bulela mofuta oa seamohedi oa terata ka nako e ts'oanang ho ts'oara terata.
2. Ho potoloha kotola ea moamoheli ho fetola kutloisiso. Ha likhoele li le haufi haholo, li ka ikamahanya le kutlo e nyane ea ho fumana thapo. Tobetsa konopo ea "MUTE" nako e telele bakeng sa mokhoa oa MUTE. Ka mokhoa ona, leseli la ponts'oa ea matla le sebelisoa ho latela terata. Ha ho amoheloa letšoao le matla ka ho fetisisa, mabone a lipontšo a robeli a bonesitsoe. Tobetsa "MUTE" hape ho tsoa MUTE
   mokgoa.
3. Ka potlako netefatsa sephetho sa ho lata (feela bakeng sa boema-kepe ba RJ45). Ka mor'a hore u fumane thapo, hokela thapo ea marang-rang ho "UTP" ea se amohelang mohala bakeng sa ho lemoha mehala ea para. Bakeng sa mohlalaample, Ha "Otlolohile / Sefapano / Tse ling" e khantša, e bontša ho netefatsa thapo e ts'oanang. Letšoao le boetse le bontša mofuta oa cable. Lipontšo tsa 1-8 le G li bonts'a ho fumanoa ha tatellano ea mela ka ho sa feleng, 'me tatellano eo letšoao le khantšang ka eona ke tatellano ea mohala.
   Boemo ba ho tsoela pele ha port:
   Tobetsa konopo ea "MUTE", ha lebone la ponts'o ea koung le bonesitsoe, mabone a 1-8 le G a bonts'a khokahano ea mohala oa sehokedi sa RJ45 kapa kahare ho 1 mitha ho tsoa sehokelong sa RJ45. Joalokaha ho bontšitsoe ka ho le letona, Haeba lebone le bonesitsoe, ho bolela hore le hoketsoe ebile ho joalo.
4. Boema-kepe ba UTP ba emitter le moamoheli bo ka fihla ho 60V ho mamella voltage, terata e ka lateloa ka kotloloho mabapi le switjha ea PoE.

Tlhahlobo ea UTP

Ts'ebetso ea tatellano ea tatellano ea tatellano ea tatellano ea lipale

Mohato oa 1: Kopanya thapo ea marang-rang kapa mohala oa mohala ho koung ea RJ45 ea terata e tsamaisang terata, ebe o hokela pheletso e 'ngoe ho sehokelo sa UTP sa seamohedi sa terata. (Seamohedi sa terata se hloka ho buloa)
Mohato oa 2: Switjha terata tracker emitter ho UTP mokgwa wa, le 1-8 le G litsupa tla bontša tatelano ea kabel, 100M le 1000M pontshi tla bontša hore na kabel ke 100M kapa 1000M marangrang, le moamoheli kabel hape ka bona tatelano. E ka potlakela ho tseba thapo hore na e tloaelehile ka terata e tsamaisang terata kapa moamoheli oa terata, haeba e supa Direct / Cross, thapo e tloaelehile. Kamora hore litsupa tse 8 li khanye, seamohedi sa terata se tla beep ho bontša mofuta oa thapo ea marang-rang. Molumo o le mong ke thapo e otlolohileng, melumo e 'meli ke thapo ea sefapano,' me melumo e meraro ke thapo e 'ngoe kapa e fosahetseng.

Tlhaloso ea ts'ebetso ea marang-rang ea marang-rang

Ka mokhoa oa UTP, tobetsa konopo ea "SET" ho chencha "LOCAL" mode.
Phumano e tsoelang pele ea boema-kepe ba lehae: ha sesupo sa "LOCAL" se le teng, hokela pheletso e 'ngoe ea thapo ea marang-rang ho moamoheli oa terata "UTP" kapa o hakolle boema-kepe ba UTP, lits'oants'o tsa 1-8 le G li bonts'a boemo ba ho tsoela pele ha koung ea cable cable kapa ka hare ho 1 mitha ea koung ea marang-rang e neng e hokahanya mohala oa terata tracker.
Joalokaha ho bonts'itsoe setšoantšong se ka tlase, lithakhisa tsa 1 tsa boema-kepe ba marang-rang ka thoko ho terata ea terata e khaotsoe, lets'oao la 1 le tsoa ho litsupa tsa 1-8, ho bolela hore 1pin ea koung e khaotsoe.

Tlas'a mokhoa oa UTP, tobetsa konopo ea "SET" ho fetohela ts'ebetsong ea "REMOTE"
Phumano e tsoelang pele ea boema-kepe: "Letšoao la" REMOTE "le buletsoe, hokela pheletso e 'ngoe ea thapo koung ea UTP ea cable tracer (Receiver).
1-8, G pontshi e bonts'a ho tsoela pele ha koung ea thapo e hokahantsoeng le Remote end (Receiver) kapa thapo kahare ho 1 mitha ho tloha koung. Joalokaha ho bonts'itsoe setšoantšong se ka tlase, pini ea bohlano ea kou ea thapo ka lehlakoreng la mohala oa thapo e hoketsoe, 'me sesupo sa 5 ho litsupa tsa 5-1 se koetsoe, ho bonts'a hore pini ea bohlano ea koung e khaotsoe le lithakhisa tse ling li hokahane.

 

Bohareng ba thapo ea cable (bohareng ba bofelo): Haeba tatellano ea thapo e lemoha hore lithakhisa tsa thapo li hokeloe, 'me lithapo tsa lehae / tse hole li fumanoa li hokahane, ho bontša hore ntlha ea khebo e bohareng ema hole le likoung ka mahlakore ka bobeli.

Phumano e tsoelang pele boemong ba li-switch tse hokahaneng

Tlas'a mokhoa oa UTP, tobetsa konopo ea "SET" ho fetohela ts'ebetsong ea "SWITCH". Letšoao la "SWITCH" le buletsoe, ha le hoketsoe ho switch, 1-8, G ponts'o e bonts'a tsoelopele ea thapo, mabone a mekhoa e hokahantsoeng, mabone a koetsoe a hoketsoe.

PD powered e fumanoe

PoE switch kapa PSE sesebelisoa sa phepelo ea matla se hoketsoeng boema-kepeng ba "PD" ea mohala oa mohala, haeba lebone le khantšitsoe, ho bolela PoE vol.tage output e sebetsa ka tsela e tloaelehileng. Ho na le mabone a 4 a pontšo ea "PD" koung, ha ho lekoa lithapo tse sebelisitsoeng poE switch bakeng sa phepelo ea motlakase, haeba leseli la 1236 le ON, ho bolela hore PoE switch phepelo ea matla ka Pin 1236. haeba leseli la 4578 le ON, ho bolela. PoE switch phepelo ea matla ka li-pins 4578. haeba 1236 le 4578 indicator mabone a ON, ho bolela phepelo ea motlakase ea sesebelisoa ka li-pins 1236 le 4578.
Kopo: ho sheba lithakhisa tse sebelisoang ke switch ea PoE kapa sesebelisoa se seng bakeng sa phepelo ea motlakase, ho qoba sesosa ho ke ke ha fana ka motlakase kapa kh'amera le sesebelisoa se seng se senyehileng.

Likarolo tse ling

Line DC level le liteko tse nepahetseng / tse mpe tsa polarity

Tlosa emitter, sekhechana sa terata e khubelu le e ntšo ea cable ea RJ11 e hokahane le mohala oa mohala
(Hlokomela: Haeba mohala oa mohala o nang le lihokelo tsa RJ45 tse hoketsoeng ka kotloloho hokela thapo ea mohala koung ea RJ11)
Haeba sesupo se khubelu se le teng, ho bolela hore sekhechana sa terata e khubelu se nepahetse, 'me sekoto se setšo se fosahetse; haeba sesupo sa botala se le teng, ho bolela hore sekhechana sa terata e ntšo se nepahetse, 'me sekhechana sa terata e khubelu se fosahetse. boemo bo phahame, leseli la ponts'o le khanya, boemo bo tlase, leseli la ponts'o le lefifi.

Litlhaloso

Ntho	Terata Tracker
Emit pontšo	Letšoao la dijithale （hana lerata le matšoao a bohata）
Mofuta oa thapo	RJ45 Twisted pair, RJ11 mohala oa mohala, cable ea BNC jj.
Teko ea cable ea UTP	Digital "1-8" bakeng sa tatelano ea thapo e sirelelitsoeng ka thapo le ts'ireletso ea lera e sirelletsang pontshi, lekola mofuta oa mofuta oa cable: e otlolohileng / sefapano / tse ling, teko ea cable ea 100M / 1000M, le bofelo bo haufi, bohareng ba bofelo, tlhahlobo e tsoelang pele ea bofelo
Teko ea tsoelo-pele ea Lihokelo tsa cable tsa RJ45	hlahloba ts'ebetso ea terata ea lihokelo tsa cable tsa RJ45 ka bobeli
Teko ea PD (powered)	PoE switjha matla a fanang ka boemo ba teko le ho hlahloba lithakhisa tse sebelisetsoang phepelo ea motlakase.
Leseliamp	Penya e khutšoane On / Off Led Light
Mokhoa o khutsitseng	Tobetsa konopo ea nako e telele "Limumu" ho chencha mokhoa o khutsitseng, fumana cable ka pontshi
Tlhahiso ea molumo	Ts'ehetsa khumo ea kantle ea audio

Phepelo ea motlakase
Matla a kantle phepelo	Battery e 'meli ea AA
Kakaretso
Ho sebetsa Mocheso	-10℃—+50℃
Mongobo o sebetsang	30%-90%
Boemo
Emitter teba	152mm: x 62mm x, 27mm /0.12KG
Moamoheli Boemo	218mm: x 48mm x, 32mm /0.1KG

Lintlha tse kaholimo ke tsa litšupiso feela mme phetoho efe kapa efe ea tsona e ke ke ea tsebisoa pele. Bakeng sa lipotso tse qaqileng tsa tekheniki, ka kopo ikutloe u lokolohile ho ikopanya le rona.

Litokomane / Lisebelisoa

PEAKMETER Multi-function Wire Tracker [pdf] Bukana ea Mosebelisi Multi-mosebetsi terata Tracker

Litšupiso

• Bukana ea Mosebelisi