PCE Instruments PCE-VC 20 Vibration Process Calibrator
Litlhaloso
- Boholo ba Vibration (litekanyetso tsa RMS):
- Ho potlakisa ho sisinyeha: 10 mm/s
- Lebelo la ho thothomela: 10 m
- Phallo ea ho sisinyeha: 159.15 Hz
- Maqhubu a mahlaseli: 1000 / s
- Pontšo ea boemo: Nako ea ho beha <10 s
- Boima bo boholo ba ntho ea teko bakeng sa ho nepahala ho boletsoeng: 600 g
- Vibration exciter:
- Matla a matla: 10 N
- Max. torque: 2 Nm
- Torque ea lebitso: 1 Nm
- Max. matla a pota-potileng: 20 Nm
- Ho sisinyeha ha Transverse <10% ea axis e kholo, e lekantsoeng 14 mm
ka holimo ho shaker
- Ho hlongoa ha ntho ea teko: lesoba le tekiloeng ka M5, botebo ba 7 mm
- ClampSekgomaretsi sa makenete
- Mehato ea mocheso oa ho sebetsa bakeng sa ho nepahala ha 3%: ho nepahala ha 5%.
- Mongobo
Litaelo tsa Tšebeliso ea Sehlahisoa
Lintlha tsa Polokeho
Ka kopo bala bukana ena ka hloko le ka botlalo pele u sebelisa sesebelisoa ka lekhetlo la pele. Sesebelisoa se ka sebelisoa feela ke basebetsi ba tšoanelehang le ho lokisoa ke basebetsi ba PCE Instruments. Tšenyo kapa likotsi tse bakoang ke ho se latele bukana ha li kenyellelitsoe boikarabellong ba rona mme ha li koaheloe ke waranti ea rona.
- Sesebelisoa se tlameha ho sebelisoa feela joalokaha ho hlalositsoe bukeng ena ea litaelo. Haeba e sebelisoa ka tsela e 'ngoe, sena se ka baka maemo a kotsi ho mosebelisi le tšenyo ea metara.
- Sesebelisoa se ka sebelisoa feela ha maemo a tikoloho (thempereichara, mongobo o lekanyelitsoeng, ...) a le ka har'a mekhahlelo e boletsoeng ho litlhaloso tsa tekheniki. Se ke oa beha sesebelisoa mochesong o feteletseng, mahlaseling a letsatsi, mongobo o feteletseng kapa mongobo.
- Se ke oa pepesa sesebelisoa ho makala kapa ho thothomela ho matla. Nyeoe e lokela ho buloa feela ke basebetsi ba tšoanelehang ba PCE Instruments. Le ka mohla u se ke ua sebelisa sesebelisoa ha matsoho a hau a le metsi. Ha oa tlameha ho etsa liphetoho tsa tekheniki ho sesebelisoa.
- Sesebelisoa se lokela ho hloekisoa feela ka papatsoamp lesela. Sebelisa feela pH-neutral cleaner, ha ho na li-abrasives kapa solvents. Sesebelisoa se tlameha ho sebelisoa feela le lisebelisoa tse tsoang ho PCE Instruments kapa tse lekanang le tsona.
- Pele o sebelisoa, hlahloba mokotla bakeng sa tšenyo e bonahalang. Haeba ho na le ts'enyehelo e teng, u se ke ua sebelisa sesebelisoa Se ke ua sebelisa sesebelisoa sebakeng se phatlohileng.
- Methati ea litekanyo joalo ka ha ho boletsoe ho lintlha ha ea tlameha ho fetisoa tlas'a maemo afe kapa afe.
- Ho se boloke lintlha tsa polokeho ho ka baka tšenyo ho sesebelisoa le likotsi ho mosebelisi. Ha re nke boikarabello bakeng sa liphoso tsa khatiso kapa liphoso tse ling bukeng ena.
Ha re nke boikarabello bakeng sa liphoso tsa khatiso kapa liphoso tse ling bukeng ena. Re supa ka ho hlaka lipehelo tsa rona tsa tiisetso tse akaretsang tse ka fumanoang ho latela maemo a rona a akaretsang a khoebo. Haeba u na le lipotso ka kopo ikopanye le PCE Instruments. Lintlha tsa mabitso li ka fumanoa qetellong ea bukana ena.
Litlhaloso
| Boholo ba ho sisinyeha (litekanyetso tsa RMS) | ||
| Ho potlakisa ho sisinyeha | 10 m/s² | ± 3% ho 0 ho isa ho 40 °C |
| Lebelo la ho sisinyeha | 10 limilimithara/s | ± 3% ho 0 ho isa ho 40 °C |
| Ho falla ha vibration | 10 μm | ± 3% ho 0 ho isa ho 40 °C |
| Maqhubu a ho sisinyeha | 159.15 Hz | ±0.05% ho -10 ho isa ho 55 °C |
| Radian frequency | 1000/s | ±0.05% ho -10 ho isa ho 55 °C |
| Pontsho ya boemo | Pontšo ea liperesente, ka holimo ho ±3 % beep tone | |
| Nako ea ho lokisa | <10 s | |
| Boholo ba boima ba ntho ea teko bakeng sa ho nepahala ho boletsoeng | 600 g | |
| Sehlaseli sa vibration | ||
| Matla a matla | 10 N | |
| Max. torque | 2 Nm | |
| Torque ea lebitso | 1 Nm | |
| Max. matla a tsheletseng | 20 Nm | |
| Ho thothomela ho fetelletseng | <10 % ea axis e kholo, e lekantsoeng 14 mm ka holim'a shaker | |
| Ho hlomamisa ntho ya teko | Sekoti se kentsoeng ka M5, botebo ba 7 mm Clampmakenete
Sekgomaretsi |
|
| Mehato ea mocheso oa ho sebetsa bakeng sa
3% ho nepahala 5% ho nepahala |
0 ho isa ho 40 °C -10 ho isa ho 55 ° C |
|
| Mongobo | <90% ho 30 °C, ha ho condensation | |
| Sebaka sa ho hasanya sa Magnetic ho shaker | <0.2 mT | |
| Phepelo ea motlakase | Accumulator ea NiMH e hahiloeng, 7.2 V / 1.6 Ah | |
| Nako ea ts'ebetso ea betri | Hoo e ka bang. 5 h le m = 100 g | |
| Nako ea tefiso ea accumulator | 3 h | |
| Lefisa sekoti | DIN 45323 (5.5 / 2.1)
Positive terminal ho center pin |
|
| Tefiso voltage | 11 ho 18 V DC | |
| Chesa hajoale | <1 A | |
| Litekanyo | 100 x 100 x 120 limilimithara | |
| Boima ba 'mele | 2.2 lik'hilograma | |
Tlhaloso ea tsamaiso
Morero
- Tekanyo e bonolo le e bonolo ea metering ea vibration, lisebelisoa tsa ho rekota le ho laola.
- Ho hlahloba khafetsa lisebelisoa tse joalo le ho kenya.
- Ho fumana liphoso.
Thepa
- Sesebelisoa sa betri se sebetsang hantle le se matla bakeng sa laboratori le ts'ebeliso ea masimong.
- Boholo ba thothomelo bo ikemetseng ka le ts'ebeliso ea tšimo.
- 10 m/s2 ho potlakisa vibrate
- 10 mm/s lebelo la ho sisinyeha
- 10 μm ho falla ha vibrate
- Quartz e tsitsitseng maqhubu a vibrate ea 159.15 Hz (radian frequency 1000/s).
- E loketse dintho tsa teko tse boima ba ho fihla ho 600g.
PCE-VC20 ea vibration calibrator e hlahisa ho sisinyeha ha mochine ka maqhubu a tsitsitseng a quartz le boholo bo laoloang ka nepo. Sensor ea vibration, ho kenyeletsoa likhoele tse hokahaneng, li-conditioner tsa matšoao le lisebelisoa tsa ho bala li ka lekanyetsoa ka likarolo tsa ho potlakisa, lebelo kapa phalliso. Accelerometer ea referense ka har'a hlooho ea shaker le potoloho ea taolo e boloka boemo ba ho thothomela bo sa fetohe 'me bo sa itšetleha ka boima ba ntho e lekanyang e khomaretsoeng. Pontšo e bontša phoso ka liphesente. Ho na le temoso ea acoustic ha moeli oa phoso o fetisitsoe. Ka lebaka la betri ea eona e ka nchafatsoang ka hare, PCE-VC20 e loketse hantle ts'ebeliso ea mehala. Sesebelisoa se na le ts'ebetso ea "automatic switch-off" e thibelang ho tsoa ka phoso. Pontsho e bontsha boemo ba ho tjhaja betri. Yuniti e tla le phepelo ea motlakase ea kantle bakeng sa ho tjhaja.
Mokotla oa polasetiki o fanoang o lumella ho ts'oaroa habonolo le lipalangoang tse bolokehileng.
Tshebetso
Ho hokela Ntho ea Teko
The Vibration exciter ea PCE-VC20 e na le lesoba la M5 le tlatsitsoeng le botebo ba 7 mm bakeng sa sehokelo sa sesebelisoa tlas'a teko. Li-bolts tse fanoeng le li-adapter tsa stud kapa clampmagnet e ka sebelisoa bakeng sa ho kenya.
Bokaholimo ba "vibration exciter" bo entse hore bo se ke ba hlola bo tšoana le plasma nitride coasting. Bakeng sa li-transducers tse bobebe, boka ba sekhomaretsi kapa tepi e khomarelang mahlakoreng a mabeli e ka sebelisoa bakeng sa ho kenya. Sebaka se bataletseng bakeng sa ho kenya sekhomaretsi se ka fumanoa ka ho sebelisa M5 insulating flange Model 029 e fumanehang ho tloha Metra. Li-attachments tsa Magnetic le tsa sekhomaretsi li lumelletsoe feela bakeng sa likhakanyo tse hakanyetsoang. Ho nepahala ho netefalitsoe feela bakeng sa sephutheloana sa screw. Ha u kenya mohlala, ela hloko kabo ea symmetrical ea boima ba ntho. Ho seng joalo, tsamaiso ea vibrating e ka 'na ea khelosoa ho tloha sebakeng sa eona se seholo. Ha u sebelisa mekhoa ea ho kopanya bakeng sa ho lekanya li-transducers, ho khomarela li-symmetrical ho ba bohlokoa ka ho khetheha, ka mohlala, ha ho lekanyetsoa x le y axis ea triaxial accelerometer. Tabeng ena, ho khothalletsoa ho sebelisa boima bo leka-lekaneng joalokaha ho bontšitsoe papisong e latelang.
Ka kopo hlokomela hore lithapo tse boima tse kopanyang li lokela ho tšehetsoa haufi le ntho ea teko. Leha ho le joalo, tšebeliso ea matla ka thapo e tlameha ho qojoa. Tekanyetso e kholo ea torque ea 1 ho isa ho 2 Nm ka har'a seqhutsu sa vibration ha ea tlameha ho fetisoa kaha sena se ka senya sesebelisoa. PCE-VC20 e lokela ho behoa sebakeng se thata. Ts'ebetso ea letsoho ha e khothalletsoe ka lebaka la liphoso tse ka bang teng.
Tekanyetso
Ka mor'a ho kopanya sesebelisoa tlas'a teko fetola PCE-VC20 ka ho hatella konopo ea "On / Off" ho fihlela pontšo e khantša. Lintlha tse mabapi le sesebelisoa, joalo ka hardware le liphetolelo tsa software le letsatsi la ho lekanya ho qetela, li tla hlahisoa metsotsoana e seng mekae. Kamora nako e khuts'oane, lets'oao la vibrate lea tsitsa. Pontšo e bonts'a boleng ba maqhubu a vibrate le boholo (setšoantšo sa 2). Ka kopo hlokomela hore tsena ha se boleng bo lekanyang empa ke litekanyetso tse tloaelehileng feela. 
Karolong e ka holimo ea letsoho le letona u tla bona bonnete ba 'nete ba boholo ba vibrate ka liphesente. Kamora nako e khuts'oane, boleng ba liperesente bo tlameha ho kopana ho zero. Haeba phoso e felletseng e feta 3%, boleng ba liperesente bo tla fetohela ho litlhaku tse fapaneng 'me molumo oa beep o tla hlahisoa. Tabeng ena, ha ho calibration e ka etsoang. Ha boima bo boholo ba ntho ea teko bo fetisoa, ho e-na le palo ea liphesente, molaetsa oa phoso "OVERL" o tla hlaha 'me shaker e tla tima. Ho tsoela pele ka ho lekanya, qala ka ho tima calibrator. Ebe u fokotsa boima ba ntho ea teko 'me u fetole calibrator hape. Boima bo amohelehang bo fihla ho ligrama tse 500, ho itšetlehile ka makhetlo a khethiloeng. Molaetsa o mongata o ka boela oa felisoa ka ho theola boholo ba ho thothomela. Moleng o ka tlase oa pontšo ho tla hlaha letsatsi la ho lekanya ho qetela ha PCE-VC20 ea hau. Keno ena e ka fetoloa feela nakong ea tlhahlobo ea feme. Ka kopo bala hape karolo ea 5 bakeng sa lintlha tse mabapi le calibration. PCE-VC20 e ka tima ka ho hatella konopo ea "ON/OFF" bonyane motsotsoana o le mong. Haeba sena se ka siuoa, ho fanoe ka sebali se tla tima calibrator ka mor'a metsotso e 10. Tlhokomeliso: Sekhahla sa vibrate ha sea lokela ho sebelisoa libakeng tse litšila le tse lerōle. Tlhokomelo e khethehileng e lokela ho nkoa hore ha ho na likaroloana tsa ferromagnetic tse kenang ka har'a sesebelisoa: li ka senya nako e khutšoanyane. Litšitiso ka lebaka la litšila le lerōle ha li koaheloe ke waranti.
© PCE Lisebelisoa
Ho fetola Accumulator
Letšoao la betri le fumaneha hukung e kaholimo ho leqele la skrineng. Bargraph e felletseng e bontshwa ha betri e tjhajilwe ka botlalo. Leha bargraph e se na letho sesebelisoa se ntse se ka sebelisoa ka har'a litlhaloso tsa sona ka nako e itseng. Ha betri e phahamatage theoha ka tlase ho boleng ba bohlokoa, PCE-VC20 e tima ka bo eona. Sesebelisoa se na le accumulator ea NiMH e fanang ka matla bakeng sa lihora tse ka bang 5 tsa ho sebetsa. Ho tjhaja betri, hokela adaptara ya polaka e kgolo (15 VDC) ho sokete ya DIN e ka thoko ho khase. Ka ho khetheha yuniti e lokela ho tima nakong ea ho tjhaja. Ho tjhaja ho tla nka lihora tse ka bang 3. Nakong ea ts'ebetso ea ho tjhaja, letšoao la betri le tla lula le ntse le tsamaea (Setšoantšo sa 3).
Nakong ea ts'ebetso ea ho tjhaja PCE-VC20 e ka sebelisoa bakeng sa ho lekanya. Leha ho le joalo, sena se tla eketsa nako e hlokahalang ea ho tjhaja. Accumulator e lokela ho fetoloa mocheso oa kamore. Ha lithempereichara tse phahameng ho tjhaja ho ka emisoa pele ho fihla boemong bo felletseng ka lebaka la sensor ea mocheso e hahelletsoeng Betri ha e na phello ea mohopolo. Tefiso e sa fellang e lumelletsoe. Khokahano e sa feleng ea adaptara e kholo ha e khothalletsoe. Sena se ka etsa hore betri e senyehe pele ho nako. E le ho qoba ho tjhaja betri ho feta tekano, ha ho kgothaletswe hore o hakolle le ho hokela adaptara e kgolo hape hang ka mora ho qeta ho tjhaja. Ha yuniti e sa sebetse, betri e lokela ho tjhajwa bonyane hang ka selemo. Betri e hahelletsoeng ka hare ha e lokisoe. Joalo ka li-accumulator tsohle e na le palo e lekanyelitsoeng ea li-cycle tsa ho tjhaja. Haeba nako ea ts'ebetso e nang le betri e tlatsitsoeng ka botlalo e sa lekana, betri e lokela ho nkeloa sebaka. Tabeng ena, calibrator e lokela ho khutlisetsoa ho moetsi le ho nepahala ha calibrator.
Seta bocha
Haeba ho ka etsahala hore PCE-VC20 ea hau e se ke ea buloa ka konopo ea "On/Off", ho ka 'na ha hlokahala hore u tobetse konopo ea Reset. Konopo ena e fumaneha ka lehlakoreng le ka tlase la nyeoe haufi le konopo ea senotlolo. Sebelisa ntho e tšesaane eo e seng ea tšepe, joalo ka toothpick, ho tobetsa konopo ka har'a lesoba. Sena se tla qala sesebelisoa. Ho tobetsa konopo ea Reset ha ho na phello ea ho nepahala.
Tekanyetso
Litšobotsi tsa vibrate tsa PCE-VC20 li tsitsitse haholo esita le ka mor'a tšebeliso e matla. Liphetoho tse tloaelehileng li ka tlase ho 1% ka selemo. Re khothaletsa ho lekanya bocha selemo le selemo. Ha ho e-na le khatello ea maikutlo, ho theola sesebelisoa, joalo-joalo ho eletsoa ho tsosolosa hang-hang.
Ikopanye
Haeba u na le lipotso, litlhahiso kapa mathata a tekheniki, ka kopo u se ke oa qeaqea ho ikopanya le rona. U tla fumana lintlha tse amanang le mabitso qetellong ea bukana ena ea mosebelisi.
Ho lahla
Bakeng sa ho lahloa ha libeteri ho EU, ho sebetsa taelo ea 2006/66/EC ea Paramente ea Europe. Ka lebaka la lintho tse silafatsang tse teng, libeteri ha lia tlameha ho lahloa e le litšila tsa ka tlung. Li tlameha ho fuoa libaka tsa pokello tse etselitsoeng morero oo. E le ho latela taelo ea EU 2012/19/EU re khutlisetsa lisebelisoa tsa rona morao. Re ka li sebelisa hape kapa ra li fa k'hamphani e etsang lintho hape e tsamaisang lisebelisoa ho latela molao. Bakeng sa linaha tse kantle ho EU, libeteri le lisebelisoa li tlameha ho lahloa ho latela melao ea sebaka sa heno ea litšila. Haeba u na le lipotso, ka kopo ikopanye le PCE Instruments.
Amerika
PCE Americas Inc. 711 Commerce Way suite 8 Jupiter / Palm Beach 33458 FL USA
Jeremane
PCE Deutschland GmbH
Ke Langel 4
D-59872 Mechede
Deutschland
Mohala: +49 (0) 2903 976 99 0
Fekse: +49 (0) 2903 976 99 29
info@pce-instruments.com
www.pce-instruments.com/deutsch
Amerika
Litlhaloso tsa likarolo tsa PCE Americas Inc.
711 Commerce Way suite 8 Jupiter / Palm Beach
33458 leq
usa
Mohala: +1 561-320-9162
Fax: +1 561-320-9176
info@pce-americas.com
www.pce-instruments.com/us
Netherlands
PCE Brookhuis BV
Institutenweg 15
Tlhaloso: 7521 PH
Nederland
Thelefono: +31 (0) 900 1200 003 Fax: +31 53 430 36 46
info@pcebenelux.nl
www.pce-instruments.com/dutch
China
PCE (Beijing) Technology Co.,Ltd 1519 Room, 4 Building
Banna Tou Gou Xin Cheng,
Banna ba Setereke sa Tou Gou
102300 Beijing
China
Mohala: +86 (10) 8893 9660
info@pce-instruments.cn
www.pce-instruments.cn
Fora
PCE Instruments France EURL
23, Rue de Strasbourg
67250 SOULTZ-SOUS-FORETS Fora
Mohala: +33 (0) 972 3537 17 Numéro ea fax: +33 (0) 972 3537 18
info@pce-france.fr
www.pce-instruments.com/french
united kingdom
PCE Instruments UK Ltd
Units 12/13 Southpoint Business Park Ensign Way, Boroaamptona Hampshirele
United Kingdom, SO31 4RF
Mohala: +44 (0) 2380 98703 0
Fax: +44 (0) 2380 98703 9
info@industrial-needs.com
www.pce-instruments.com/english
Chile
PCE Instruments Chile SA
Lekhetho la ID: 76.154.057-2
Santos Dumont 738, local 4 Comuna de Recoleta, Santiago, Chile Tel. : +56 2 24053238
Fax: +56 2 2873 3777
info@pce-instruments.cl
www.pce-instruments.com/chile
kalakuni
PCE Teknik Cihazları Ltd.Şti.
Halkalı Merkez Mah.
Pehlivan Sok. No.6/C
34303 Küçükçekmece – İstanbul Türkiye
Mohala: 0212 471 11 47
Fekese: 0212 705 53 93
info@pce-cihazlari.com.tr
www.pce-instruments.com/turkish
Spain
PCE Ibérica SL
Calle Mayor, 53
02500 Tobarra (Albacete) España
Mohala : +34 967 543 548
Fax: +34 967 543 542
info@pce-iberica.es
www.pce-instruments.com/espanol
Italy
PCE Italia srl
Ka Pesciatina 878 / B-Interno 6 55010 LOC. GRAGNANO CAPANNORI (LUCCA)
Italy
Thelefono: +39 0583 975 114
Fax: +39 0583 974 824
info@pce-italia.it
www.pce-instruments.com/italiano
Hong Kong
PCE Instruments HK Ltd.
Unit J, 21/F., Setsi sa COS
56 Tsun Yip Street
Kun Tong
Kowloon, Hong Kong
Mohala: +852-301-84912
jyi@pce-instruments.com
www.pce-instruments.cn
Litokomane / Lisebelisoa
 |
PCE Instruments PCE-VC 20 Vibration Process Calibrator [pdf] Litaelo PCE-VC 20 Vibration Process Calibrator, PCE-VC 20, Vibration Process Calibrator, Process Calibrator, Calibrator |
