Lisebelisoa tsa PCE PCE-325D Sound Level Meter
Litaelo tsa Tšebeliso ea Sehlahisoa
Ka kopo bala bukana ka hloko pele u sebelisa sesebelisoa. Ke basebetsi ba tšoanelehang feela ba lokelang ho sebetsa le ho lokisa sesebelisoa. Ho se ikobele bukana ho ka baka tšenyo kapa likotsi tse sa koaheloang ke tiisetso.
- PCE-325 / PCE-325D Sound Level Meter e na le tlhaloso ea bohlokoa le pontšo.
- Pontšo e kenyelletsa LCD ea linomoro tse 3 1/2 e nang le graph ea analog bakeng sa ho bala habonolo.
- Netefatsa hore sesebelisoa se tjhajiloe hantle pele se sebelisoa.
- Bulela sesebelisoa u sebelisa konopo ea matla.
- Khetha mefuta e lakatsehang ea litekanyo (Auto kapa Manual) u sebelisa li-setting tse nepahetseng.
- Tšoara sesebelisoa ka lehlakoreng la mohloli oa molumo ho lekanya maemo a molumo.
- Bala litekanyo tse hlahang skrineng 'me u nke mehato e hlokahalang ho latela lipalo.
- Tima sesebelisoa ka mor'a ho se sebelisa ho baballa bophelo ba betri.
- Kamehla lekanya sesebelisoa u sebelisa calibrator e tloaelehileng joalokaha e hlalositsoe bukeng ea litaelo ho netefatsa litekanyo tse nepahetseng.
- Hloekisa sesebelisoa ka lesela le bonolo le le omileng.
- Boloka sesebelisoa sebakeng se phodileng, se omileng ha se sa sebelisoe.
- Hlahisa betri ka moo ho hlokahalang ho boloka tshebetso e ntlafetseng.
LBH
- Q: Ke lokela ho etsa eng haeba boemo ba betri bo benya?
- A: Ha sesupo sa boemo ba betri se benya, ho bolela hore matla a betritage tlase haholo. Ka kopo, tjhaja betri ho tsoela pele ho sebelisa sesebelisoa.
- Q: Ke fihlella joang karolo ea logger ea data ho PCE-325D?
- A: Karolo ea logger ea data ho PCE-325D e ka boloka ho fihla ho lihlopha tsa 32,000 tsa litekanyetso tse lekantsoeng. Sheba bukana ea litaelo bakeng sa ho fihlella le ho khutlisa data ho tsoa ho data logger.
Lintlha tsa polokeho
Ka kopo bala bukana ena ka hloko le ka botlalo pele u sebelisa sesebelisoa ka lekhetlo la pele. Sesebelisoa se ka sebelisoa feela ke basebetsi ba tšoanelehang le ho lokisoa ke basebetsi ba PCE Instruments.
Tšenyo kapa likotsi tse bakoang ke ho se latele bukana ha li kenyellelitsoe boikarabellong ba rona mme ha li koaheloe ke waranti ea rona.
- Sesebelisoa se tlameha ho sebelisoa feela joalokaha ho hlalositsoe bukeng ena ea litaelo. Haeba e sebelisoa ka tsela e 'ngoe, sena se ka baka maemo a kotsi ho mosebelisi le tšenyo ea metara.
- Sesebelisoa se ka sebelisoa feela ha maemo a tikoloho (thempereichara, mongobo o lekanyelitsoeng, ...) a le ka har'a mekhahlelo e boletsoeng ho litlhaloso tsa tekheniki. Se ke oa beha sesebelisoa mochesong o feteletseng, mahlaseling a letsatsi, mongobo o feteletseng kapa mongobo.
- Se ke oa pepesetsa sesebelisoa ho makala kapa ho thothomela ho matla.
- Nyeoe e lokela ho buloa feela ke basebetsi ba tšoanelehang ba PCE Instruments.
- Le ka mohla u se ke ua sebelisa sesebelisoa ha matsoho a hau a le metsi.
- Ha oa tlameha ho etsa liphetoho tsa tekheniki ho sesebelisoa.
- Sesebelisoa se lokela ho hloekisoa feela ka papatsoamp lesela. Sebelisa feela pH-neutral cleaner, ha ho na li-abrasives kapa solvents.
- Sesebelisoa se tlameha ho sebelisoa feela le lisebelisoa tse tsoang ho PCE Instruments kapa tse lekanang le tsona.
- Pele o sebelisoa, hlahloba mokotla bakeng sa tšenyo e bonahalang. Haeba ho na le tšenyo e bonahalang, u se ke ua sebelisa sesebelisoa.
- Se ke oa sebelisa sesebelisoa maemong a leholimo a phatlohang.
- Methati ea litekanyo joalo ka ha ho boletsoe ho lintlha ha ea tlameha ho fetisoa tlas'a maemo afe kapa afe.
- Ho se boloke lintlha tsa polokeho ho ka baka tšenyo ho sesebelisoa le likotsi ho mosebelisi.
Ha re nke boikarabello bakeng sa liphoso tsa khatiso kapa liphoso tse ling bukeng ena.
Re supa ka ho hlaka lipehelo tsa rona tsa tiisetso tse akaretsang tse ka fumanoang ho latela maemo a rona a kakaretso a khoebo.
Tlhaloso ea tekheniki
| Litekanyetso tse sebetsang | IEC61672-1: Sehlopha sa 2013 sa 2 |
| Lekhalo la litekanyo | Auto: 30 … 130 dB
Bukana: 30 … 90 dB, 50 … 110 dB, le 70 … 130 dB |
| Ho nepahala | ±1.5 dB (maemong a litšupiso a 94 dB le 1 kHz) |
| Qeto | 0.1dB |
| Sekhahla sa ntlafatso ea data | 500 ms |
| Boima ba khafetsa | A le C |
| Nako ea ho arabela | POTLAKO: 125 ms, BUA: 1 sec |
| Calibrator e tloaelehileng | 1 kHz sine wave @ 94 kapa 114 dB |
| Pontšo | LCD ea linomoro tse 3 1/2 e nang le graph ea analogue bar |
| Pontsho e tsoileng tseleng | Matšoao a "OVER" le "TLAS'A" ho LCD |
| Motlakase o tima | ka mor'a metsotso e 3 ea ho se sebetse |
| Pontšo ea boemo ba betri |  e benya ha betri e phahamatage tlase haholo |
| Setsebi sa data (PCE-325D) | 32,000 lihlopha tsa litekanyetso tse lekantsoeng |
| Phepelo ea motlakase | 3.7 V betri ea Li-Ion |
| Maemo a ts'ebetso | -10 … 50 °C / <80% RH |
| Maemo a polokelo | -20 … 50 °C / <80% RH |
| Litekanyo | Metha: 162 x 88 x 32 mm (6.38 x 3.46 x 1.26 ")
Sensoro: 102 x 60 x 25 mm (4.01 x 2.36 x 0.98") |
| Boima ba 'mele | hoo e ka bang. 306 dikgerama (0.674 lbs) |
Delivery Scope
- 1 x mitha ea boemo ba molumo PCE-325 kapa PCE-325D 1 x thapo ea USB
- 1 x software ea PC (PCE-325D)
- 1 x mokotla oa litšebeletso
- 1 x buka ea mosebelisi
Tlhaloso ea sesebelisoa
Tlhaloso ea bohlokoa
- Sensoro
- LCD
- Senotlolo sa boima ba maqhubu sa A/C
- TSHWARA senotlolo
- ON/OFF senotlolo
- RANGE konopo ea khetho
- Senotlolo sa nako ea karabo e potlakileng/e liehang
- MAX senotlolo
- MIN senotlolo
- Senotlolo sa REC (PCE-325D) / konopo ea khetho ea RANGE (PCE-325 feela)
Hlokomela
Sokete ea Micro USB e ka tlase ho mithara.
Pontšo
- Sesupo sa maemo a tlase
- Lintlha TŠOARA
- Letšoao la mokhoa oa MAX
- MIN sesupo sa mokgwa
- Sesupo sa mefuta e mengata
- Kerafo ea analogue
- Pontšo ea nako ea karabo e potlakileng/e liehang
- Pontšo ea dijithale
- Motlakase o tima
- Letšoao la ho qala la AUTO
- Sesupo se felletseng sa memori
- Letšoao la ho rekota data
- Letšoao la USB
- Letšoao la betri
- C frequency weighting (decibel)
- Boima ba maqhubu (decibel)
Litaelo tsa ts'ebetso
Tlosa mitha / tima
- Tobetsa o lokolle
senotlolo sa ho bulela mitha ea boemo ba molumo ebe o tobetsa le ho tšoara konopo e tšoanang metsotsoana e 3 ho tima mitha ea boemo ba molumo.
Khetha boima ba maqhubu a A/C
- Tobetsa konopo ea A / C ho khetha boima boo u bo batlang. Letšoao la "A" kapa "C" le tla hlaha ho LCD.
- Boima bo sebelisoa hangata ho lekanya maemo a lerata a akaretsang. E etsisa karabelo ea tsebe ea motho.
- Boima ba C hangata bo sebelisoa bakeng sa litekanyo tse phahameng haholo 'me bo tšoaea lerata la maqhubu a tlase ka nepo.
Khetha Mokhoa oa F/S
- Tobetsa konopo ea F/S ho khetha nako eo u batlang ho araba ka eona. Pontšo ea "FAST" kapa "SLOW" e tla hlaha ho LCD.
- POTLAKO sampling: hang ka 125 milliseconds
- BONTLE sampling: hang ka motsotsoana
- Ho lekanya ho phatloha ha molumo o mokhuts'oane kapa ho hatisa boemo bo phahameng ba molumo, sebelisa nako ea karabelo e FAST. Bakeng sa litekanyo tse akaretsang tsa molumo, sebelisa nako ea karabelo e LEBENYA.
Ho khetha mefuta ea li-decibel
Methara ena ea boemo ba molumo e na le mekhahlelo e meraro ea matsoho hammoho le mokhoa oa auto-range. E fetoha ka mokhoa o ikhethileng ho matla-up ka mefuta e mengata ea 30 … 130 dB. Mekhahlelo ea matsoho ke: 30 … 90 dB, 50 … 110 dB le 70 … 130 dB. Sebelisa RANG (feela bakeng sa PCE-325D, bakeng sa PCE-325 sebelisa linotlolo tsa motsu) ho khetha mefuta e ratoang. Lethathamo le khethiloeng le tla hlahisoa ka holimo le letšehali le ka ho le letona la LCD. Ha e le mokhoeng oa ho itlhophisa, letšoao la AUTO le tla hlaha ka tlase letsohong le letšehali. Ha u khetha mofuta oa hau oa marang-rang, sheba matšoao a TLAS'A LE HO PHETHA holimo ho LCD ho u thusa ho khetha mofuta o nepahetseng ka ho fetisisa. TLASE ho bolela hore o lokela ho khetha sebaka se tlase. HO FIHLELA ho bolela hore o hloka ho khetha sebaka se phahameng. Ka mokhoa o loketseng, graph ea analog bar e lokela ho baloa haufi le bohareng ba sebaka. Ha u belaella, sebelisa mokhoa oa auto-range.
Tekanyo
Tšoara sesebelisoa hole le 'mele oa hau kapa u se hlomelle holim'a tripod. Supa microphone mohloling oa molumo. LCD e bonts'a boemo ba molumo oa hona joale. E nchafatsoa habeli ka motsotsoana.
Hlokomela
Ha u sebelisa sesebelisoa maemong a moea (e kholo ho feta 20 mph), sebelisa bolo ea fensetere ho qoba ho bala ho sa nepahalang.
MAX/MIN mokhoa
- Ho fumana maemo a phahameng a molumo, tobetsa konopo ea MAX/MIN hang. Letšoao la MAX le tla hlaha ho LCD. Hona joale, ke boemo bo phahameng feela ba molumo bo tla nkoa le ho bontšoa.
- Boleng bo hlahang bo ke ke ba nchafatsoa ho fihlela boleng ba molumo bo holimo bo fumanoa.
- Leha ho le joalo, graph ea analog bar e tla tsoela pele ho bonahatsa ho baloa hang-hang.
- Ho hapa bonyane ba molumo, tobetsa konopo ea MAX/MIN hape, letšoao la MIN le tla hlaha ho LCD. Hona joale, ho tla nkuoa le ho bonts'oa molumo o fokolang feela. Tobetsa konopo lekhetlo le leng hape ho tsoa molemong oa ho lekanya MAX/MIN.
Tšoara data
- Tobetsa konopo ea HOLD. Palo ea dijithale e ts'oaroa 'me letšoao la "HOLD" le hlaha ho LCD. Tobetsa konopo ea HOLD hape ho khutlela ts'ebetsong e tloaelehileng.
Mokhoa oa ho rekota (PCE-325D feela)
Metha ea boemo ba molumo e na le ts'ebetso ea ho rekota data. Pele o qala ts'ebetso ea ho rekota, hokela meter ea boemo ba molumo ho PC ka micro USB ebe o theha li-parameter ka software ea PCE. Tobetsa konopo ea REC ho methareng ea boemo ba molumo ho qala ho rekota. Letšoao la REC le tla qala ho benya 'me le tla hlahisoa ho LCD.
Se ke oa tima mitha nakong ea mokhoa oa ho rekota. Ha palo e behiloeng ea data e fihlile, meter ea boemo ba molumo e tla tima ka bo eona. Ha memori e tletse, letšoao le FULL le hlaha ka tlase ho LCD. Ha data eohle e hlakotsoe, letšoao la FULL lea nyamela.
Hlokomela
Haeba meter ea boemo ba molumo e koetsoe nakong ea ho rekota, e hokahane le PC 'me u behe li-parameter hape pele u qala ho rekota hape. Ho seng joalo, letšoao la ERR le tla bontšoa ho LCD ha u tobetsa konopo ea REC bakeng sa ho rekota.
Motlakase oa Auto Off
Mosebetsi oa APO o behiloe ho ON ka ho sa feleng. Ho tima tšebetso ea APO, tobetsa konopo senotlolo ha bobebe. Ho lelefatsa bophelo ba betri, mitha ea boemo ba molumo e tla tima ka bo eona kamora metsotso e ka bang 3 ha e sa sebelisoe.
Ka mokhoa oa ho rekota kapa ha meter e hokahane ka USB, mosebetsi oa APO o holofala ka bohona ho fihlela mohopolo o tletse kapa palo e behiloeng ea lirekoto e fihletsoe.
Ho rekota data le ho kenya software
Methara ena ea boemo ba molumo e khona ho rekota data mohopolong oa eona oa kahare. Pele o ka rekota data, o hloka ho kenya software ea PCE khomphuteng ea hau. Phetolelo ea morao-rao ea software ena le litaelo tse qaqileng mabapi le mokhoa oa ho e kenya le ho e sebelisa li ka fumanoa ho https://www.pce-instruments.com. CD e nang le software e kenyelelitsoe molemong oa hau empa re khothaletsa ho khoasolla mofuta oa morao-rao ho pce-instruments. websebaka.
Ho seta kgatiso, hokela mitha ho komporo ka boemakepe bo bonyenyane ba USB.
Tekanyetso
- Sesebelisoa se lokisitsoe pele se romelloa.
- Nako e khothaletsoang ea ho lekanya ke selemo se le seng.
- Metara e lokela ho lekanyetsoa feela ke PCE Instruments.
- Ka kopo ikopanye le rona ha ho hlokahala tlhahlobo 'me u latele litaelo tsa rona mabapi le ho khutlisa metara.
Tlhokomelo le tlhoekiso
Ho hloekisa le ho boloka
- Dome ea sensor ea polasetiki e tšoeu e lokela ho hloekisoa ka papatsoamp, lesela le bonolo, ha ho hlokahala.
- Boloka mitha ea boemo ba molumo sebakeng se nang le mocheso o itekanetseng le mongobo o lekanyelitsoeng.
Ho tjhaja betri
- Ha matla a betri a sa lekana, lets'oao la betri le hlaha ho LCD ebe lea benya. Sebelisa adaptara ea motlakase ea DC 5V ho hokela boema-kepe ba ho tjhaja ba USB bo tlase botlase ba mithara.
- Letšoao la betri ho LCD le tla bontša hore betri ea tjhaja mme le tla nyamela ha betri e tjhajilwe ka botlalo.
Ikopanye
- Haeba u na le lipotso, litlhahiso kapa mathata a tekheniki, ka kopo u se ke oa tsilatsila ho ikopanya le rona.
- U tla fumana lintlha tse amanang le mabitso qetellong ea bukana ena ea mosebelisi.
Ho lahla
- Bakeng sa ho lahloa ha libeteri ho EU, ho sebetsa taelo ea 2006/66/EC ea Paramente ea Europe. Ka lebaka la lintho tse silafatsang tse teng, libeteri ha lia tlameha ho lahloa e le litšila tsa ka tlung. Li tlameha ho fuoa libaka tsa pokello tse etselitsoeng morero oo.
- E le ho latela taelo ea EU 2012/19/EU re khutlisetsa lisebelisoa tsa rona morao. Re ka li sebelisa hape kapa ra li fa k'hamphani e etsang lintho hape e lahlang lisebelisoa ho latela molao.
- Bakeng sa linaha tse kantle ho EU, libeteri, le lisebelisoa li tlameha ho lahloa ho latela melaoana ea lehae ea hau ea litšila.
- Haeba u na le lipotso, ka kopo ikopanye le PCE Instruments.
- www.pce-instruments.com.
Lintlha tsa puisano tsa PCE Instruments
Jeremane
- PCE Deutschland GmbH
- Ke Langel 26
- D-59872 Mechede
- Deutschland
- Mohala: +49 (0) 2903 976 99 0
- Fekse: +49 (0) 2903 976 99 29 info@pce-instruments.com
- www.pce-instruments.com/deutsch
united kingdom
- PCE Instruments UK Ltd
- Ntlo ea Trafford
- Chester Rd, Old Trafford Manchester M32 0RS
- united kingdom
- Mohala: +44 (0) 161 464902 0
- Fax: +44 (0) 161 464902 9
- info@pce-instruments.co.uk. www.pce-instruments.com/english
Netherlands
- PCE Brookhuis BV Institutenweg 15
- Tlhaloso: 7521 PH
- Nederland
- Phone: + 31 (0) 53 737 01 92 info@pcebenelux.nl
- www.pce-instruments.com/dutch
Fora
- PCE Instruments France EURL
- 23, Rue de Strasbourg
- 67250 Soultz-Sous-Forets
- Fora
- Mohala: +33 (0) 972 3537 17 Numéro ea fax: +33 (0) 972 3537 18 info@pce-france.fr
- www.pce-instruments.com/french
Italy
- PCE Italia srl
- Via Pesciatina 878 / B-Interno 6 55010 Loc. Gragnano
- Kapannori (Lucca)
- Italy
- Thelefono: +39 0583 975 114
- Fax: +39 0583 974 824
- info@pce-italia.it
- www.pce-instruments.com/italiano
Amerika
- Litlhaloso tsa likarolo tsa PCE Americas Inc.
- 1201 Jupiter Park Drive, Suite 8 Jupiter / Palm Beach
- 33458 leq
- usa
- Mohala: +1 561-320-9162
- Fax: +1 561-320-9176
- info@pce-americas.com
- www.pce-instruments.com/us
Spain
- PCE Ibérica SL
- Calle Mula, 8
- 02500 Tobarra (Albacete) España
- Mohala : +34 967 543 548
- Fax: +34 967 543 542
- info@pce-iberica.es
- www.pce-instruments.com/espanol
kalakuni
- PCE Teknik Cihazları Ltd.Şti. Halkalı Merkez Mah.
- Pehlivan Sok. No.6/C
- 34303 Küçükçekmece – İstanbul Türkiye
- Mohala: 0212 471 11 47
- Fekese: 0212 705 53 93
- info@pce-cihazlari.com.tr
- www.pce-instruments.com/turkish
Denmark
- PCE Instruments Denmark ApS Birk Centerpark 40
- 7400 Herning
- Denmark
- Mohala: +45 70 30 53 08
- kontakt@pce-instruments.com. www.pce-instruments.com/dansk
Litokomane / Lisebelisoa
 |
Lisebelisoa tsa PCE PCE-325D Sound Level Meter [pdf] Bukana ea Mosebelisi PCE-325, PCE-325D, PCE-325D Sound Level Meter, PCE-325D, Sound Level Meter, Level Meter, Meter |