PATAC CMU Cell Monitoring Unit
Litlhaloso
- Mohlala: CMU
- Lebitso la Sehlahiswa: Setsi sa Tlhokomelo ea Lisele
- Sehokelo: WLAN
- Phepelo Voltage: 11V~33.6V (Tlwaelehileng MoqtagE: 29.6V)
- Thempereichara ea ho sebetsa: -40°C ho ea ho +85°C
Tlhaloso ea Sehlahisoa
This product is used in wireless BMS system.
The main function is to collect cell voltage and module temperature, and then transmit to BRFM by wireless communication.
Tlhaloso ea Lereho
Sheet 1. Abbreviation
| Kgutsufatso | Tlhaloso |
| BMS | Sistimi ea taolo ea betri |
| BRFM | Battery Radio Frequency Module |
| CMU | Setsi sa Tlhokomelo ea Lisele |
| VICM | Vehicle Integration Control Module |
| BDSB | Boto ea Sensing kabo ea Battery |
Li-Parameters tsa Motheo
Sheet 2. Parameters
| Ntho | Tlhaloso ea Sebopeho |
| Mohlala | CMU |
| Lebitso la Sehlahiswa | Setsi sa Tlhokomelo ea Lisele |
| Sehokedi | WLAN |
| Phepelo Voltage | 11V ~ 33.6V (Tlhaloso VoltagE: 29.6V) |
| Mocheso oa ho sebetsa | -40℃～+85℃ |
RF Output Power
Sheet 3. Power
| Ntho | Sehlopha | Matla a Lekanyelitsoeng |
|
WLAN |
2410MHz ~ 2475MHz |
12dBm |
Tlhaloso ea sefahleho
Sheet 4. BRFM I/O
| PIN | I/O | Tlhaloso ea Mosebetsi |
| J1-1 | NTC1- | GND |
| J1-2 | NTC1+ | Signal Collect |
| J1-3 | V7+ | Signal Collect |
| J1-4 | V5+ | Signal Collect |
| J1-5 | V3+ | Signal Collect |
| J1-6 | V1+ | Signal Collect |
| J1-7 | V1-_1 | Signal Collect |
| J1-8 | V1-_2 | GND |
| J1-9 | V2+ | Signal Collect |
| J1-10 | V4+ | Signal Collect |
| J1-11 | V6+ | Signal Collect |
| J1-12 | V8+_2 | Signal Collect |
| J1-13 | V8+_1 | MATLA |
| J1-14 | Ha ho letho | / |
| J1-15 | NTC2- | GND |
| J1-16 | NTC2+ | Signal Collect |
Sehlomathiso
The production date of CMU can refer to the label.
Scan the QR code on the label and you will get the following information.
The production date of the product is read as follows：
- 23 —— 2023;
- 205 —— The 205 day.
FCC temoso
Sesebelisoa sena se latela meeli ea ho pepeseha ha radiation ea FCC e behetsoeng tikoloho e sa laoleheng. Mosebelisi oa ho qetela o tlameha ho latela litaelo tse ikhethileng tsa ts'ebetso bakeng sa ho khotsofatsa kutlo ea ts'ebeliso ea RF. Phetiso ena ha ea lokela ho koalloa kapa ho sebetsa hammoho le lenakana kapa sesebelisoa se seng.
Tlhokomeliso ea FCC:
Liphetoho leha e le life kapa liphetoho tse sa amoheloeng ka ho hlaka ke mokha o ikarabellang bakeng sa ho latela melao-motheo li ka senya matla a mosebedisi a ho sebelisa thepa ena.
Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela Karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa, e sebelisa le ho khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng.
Haeba sesebelisoa sena se baka tšitiso e kotsi ea seea-le-moea kapa kamohelo ea thelevishene, e ka lekanyetsoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e le 'ngoe kapa tse ling tsa mehato e latelang:
- Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
- Eketsa karohano pakeng tsa thepa le moamoheli.
- Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona.
- Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.
Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
- Sesebediswa sena se ke ke sa baka tshitiso e kotsi, mme (
- Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.
Polelo ea Tšusumetso ea Mahlaseli
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cmbetween the radiator and your body NOTE To
satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end product Contains Transmitter module FCC ID: 2BNQR-CMU
The User Manual OF CMU
- Author: Shuncheng Fei
- Approval: Yao Xiong
Pan Asia Technical Automotive Center Co., Ltd. 2024.4.8
LBH
Q: How can I determine the production date of the CMU?
A: The production date of the CMU can be found on the label by scanning the QR code. The date is represented as YY—-DDD where YY denotes the year and DDD denotes the day.
P: Ke lokela ho etsa'ng haeba ke ba le tšitiso ea ho amohela seea-le-moea kapa thelevishene?
A: Haeba tšitiso e hlaha, leka mehato e latelang:
- Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
- Eketsa karohano lipakeng tsa sesebelisoa le moamoheli.
- Hokela lisebelisoa ho potoloho e fapaneng le ea moamoheli.
- Ikopanye le morekisi kapa setsebi bakeng sa thuso.
Litokomane / Lisebelisoa
 |
PATAC CMU Cell Monitoring Unit [pdf] Bukana ea Mosebelisi 2BNQR-CMU, 2BNQRCMU, CMU Cell Monitoring Unit, CMU, Cell Monitoring Unit, Monitoring Unit, Unit |