OCRW 2×4 / 4×4 Series
Recessed Installation Litaelo
ERP: IIS00347
Letsatsi: 04/12/2022
Tšen. 1.0
IIS00347 Oncurve
LINTLHA TSEO
- Ho kenya ho lokela ho phethoa ke motho ea tsebang kaho le ts'ebetso ea lebone.
- Ho kenngoa ha luminaire ho tlameha ho tsamaellana le mekhoa ea naha le ea libaka le mekhoa ea motlakase.
- Bala ka hloko 'me u latele litemoso le litaelo tsohle pele u kenya kapa u sebeletsa luminaire.
- Litaelo ha li akaretse lintlha tsohle le litlhophiso tsohle tse ka bang teng tsa sehlahisoa
- Se ke oa thibela moea oa luminaire.
- Netefatsa hore leseli la LED ha lea koaheloa ka lintho tse tla thibela convection kapa conduction cooling.
- Se ke oa feta mocheso o phahameng oa tikoloho ea luminaire.
- Netefatsa hore leseli la LED le na le polarity e nepahetseng pele e kenya.
- Lihlahisoa tsena li na le palo e kholo ea tlhahiso e phahamengtage e fetang voltage meeli e ke keng ea fumaneha ho latela voltage lithibelo bakeng sa lipotoloho tsa Sehlopha sa 2 ho Khoutu ea Motlakase ea Canada. Sephetho sena se lumellana le tlhaloso ea Sehlopha sa 2 ka Khoutu ea Motlakase ea Canada. Sehlahisoa sena se lumellana le tlhokahalo ena kaha taelo ea ho kenya e hloka ho kenngoa sebakeng se thibetsoeng ho kena.
- Se ke oa phahamisa luminaire ho siling haeba khetho e bonolo e fanoa.
- Se ke oa sebelisa ntlo ea luminaire e le sekoaelo sa lebokose la mateano ntle le haeba bophara ba ntlo bo le bophara ho feta lebokose la mateano.
TEMOSO
Motlakase:
- Tlosa kapa tima motlakase pele o kenya kapa o fana ka lisebelisoa tsa luminaire.
- Fixture e tlameha ho khantšoa FEELA ka poleiti ea ho kena e kentsoeng ka har'a sebopeho.
- Lithapo tsohle tsa motlakase li tlameha ho phethoa ke ramotlakase ea nang le lengolo la tumello ho latela Khoutu ea Motlakase ea lehae le ea Naha / Canada.
- Etsa bonnete ba hore ho fana ka voltage e tsamaellana le ballast/mokhanni e nepahetseng voltage.
- Qoba ho pepesa lithapo litšepe le linthong tse bohale.
- Netefatsa hore lebone le lutse fatše ka nepo ho thibela likotsi tsa motlakase.
- Pele o kenya mochini oa motlakase, etsa tlhahlobo e nepahetseng ho netefatsa hore sesebelisoa se thehiloe hantle
Mollo:
- Boloka lintho tse tukang le tse chang li le hole le mohloli oa leseli le/kapa lense.
- Sebelisa li-conductors tse reriloeng ka mokhoa o nepahetseng joalo ka ha ho bonts'itsoe ke letšoao la sehlahisoa.
Chesa:
- Lumella luminaire hore e pholile pele u tšoara leseli. Kotsi:
- Apara likhalase tsa tšireletso le liatlana ha u tšoara lebone ho qoba kotsi 'meleng.
- Qoba ho shebana le mahlo ka kotloloho le mohloli oa leseli.
- Kamehla tšehetsa boima ba lebone.
Moetsi ha a ikarabelle bakeng sa likotsi leha e le life ka lebaka la ho kenngoa kapa ho tšoara lihlahisoa tsa eona ka tsela e fosahetseng.
Tlhoekiso le Tlhokomelo
- Sebelisa papatsoamp, lesela le se nang lesela la ho hlakola lense. Se ke oa sebelisa lihlapolli kapa lisebelisoa tse hloekisang tse nang le li-abrasive agents. Ha u hloekisa sets'oants'o, etsa bonnete ba hore matla a koetsoe, 'me setlolo sefe kapa sefe sa mokelikeli se lokela ho sebelisoa leselang la ho hloekisa' me se se ke sa fafatsoa ka kotloloho holim'a sesebelisoa ka boeona.
LITAELO:
Ho hlongoa:
- Tlosa matla a motlakase a reretsoeng ho hokela lebone.
- Tlosa lense ea concave le convex le .
- Kenya lebone ka har'a siling ea grid ea T-Bar ho tloha lehlakoreng la kamore.
- Sireletsa leseli le nang le marang-rang / liketane mohahong o ka holimo ho latela likhoutu tsa moaho tsa lehae le/kapa tsa naha.
- Tlosa poleiti ea phihlello le li-KO tse loketseng bakeng sa ho hokela likhokahanyo tsa lithapo tsa motlakase (ke ba bang).
- Etsa likhokahano tse hlokahalang tsa likhoele le likhokahano tsa fatše ho latela likhoutu tsa moaho tsa lehae le tsa naha.
- Hokela hape poleiti ea ho kena ho luminaire 'me u sireletse sekoti sa poleiti ea ho kena, ho netefatsa hore screw e kentsoe ka lesoba la ho hlaka le lesobeng le ka holimo.
- Kenya lense hape.
- Sebelisa matla.
Litokomane / Lisebelisoa
 |
OCRW IIS00347 Oncurve [pdf] Buka ea Taelo IIS00347 Oncurve, IIS00347, Oncurve |