LIEKETSENG
Konopo ena ea ho sutumetsa ka makhetlo a mane e ka hlophisoa ho laola liketso le mekhoa e fapaneng ho kenngoeng ea Niko Home Control II ho terata ea libese. E kenyellelitsoe li-LED tse ka khonehang tse fanang ka maikutlo mabapi le ketso. Ho feta moo, konopo ea push e ka sebetsa e le lebone la tataiso ha li-LED li ON. Ka lebaka la sensor ea eona e kopaneng ea mocheso le mongobo, konopo ea push e boetse e ts'ehetsa boemo ba leholimo ba libaka tse ngata le taolo ea moea, e eketsang matla a hau a matla le boiketlo.
- Sensor ea eona ea mocheso e nang le merero e mengata e ka hlophisoa ho laola sebaka sa ho futhumatsa / se pholileng ka har'a setsi sa Niko Home Control II, e le thermometer ea motheo, kapa ho etsa maemo a itseng (mohlala, ho laola li-sunscreens)
- Sensor ea mongobo e ka boela ea sebelisoa ka har'a mekhoa e tloaelehileng, mohlalaample, ho etsa taolo ea othomathike ea moea ka phaposing ea ho hlapela kapa ntlwaneng Konopo ea ho sutumetsa e na le mokhoa o bonolo oa ho tobetsa bakeng sa litsamaiso tsa likhoele tsa libese tse kenngoeng leboteng 'me e fumaneha liphethong tsohle tsa Niko.
Lintlha tsa tekheniki
Konopo ea ho sutumetsa ka makhetlo a mane e nang le li-LED le li-sensor tsa matšeliso bakeng sa Niko Home Control, e koahetsoeng ka bosoeu.
- Mosebetsi
- Kopanya sensor ea mocheso oa konopo ea push le mojule oa ho futhumatsa kapa oa ho futhumatsa bakeng sa taolo ea libaka tse ngata kapa mochini oa switching bakeng sa ho futhumatsa motlakase.
- Kopanya sensor ea eona e kopaneng ea mongobo le mojule oa moea ho etsa taolo ea othomathike ea moea
- Li-setpoints le mananeo a beke li laoloa ka app
- Calibration e laoloa ka software ea lenaneo
- Palo e kholo ea li-button tsa push e behiloeng joalo ka sensor ea mocheso ka nako e ngoe le e ngoe: 20
- Sebaka sa sensor ea mocheso: 0 - 40°C
- Ho nepahala ha sensor ea mocheso: ± 0.5°C
- Mofuta oa sensor ea mongobo: 0 - 100 % RH (e sa nyenyefatseng, kapa icing)
- Ho nepahala ha sensor ea mongobo: ± 5%, pakeng tsa 20 - 80 % RH ho 25°C
- Lintho tse bonahalang poleiti e bohareng: Letlapa le bohareng le entsoe ka enameled mme le entsoe ka PC e thata le ASA.
- Lense: K'honeng e ka ntle ea linotlolo tse 'ne ho konopo ea push ho na le LED e nyane ea 'mala oa amber (1.5 x 1.5 mm) ho bonts'a boemo ba ketso.
- Mmala: bosoeu ba enameled (hoo e ka bang NCS S 1002 - B50G, RAL 000 90 00)
- Tšireletseho ea mollo
- likarolo tsa polasetiki tsa poleiti e bohareng lia itima ka botsona (ho lumellana le tlhahlobo ea filament ea 650 ° C)
- likarolo tsa polasetiki tsa poleiti e bohareng ha li na halogen
- Keletso voltage: 26 Vdc (SELV, polokeho e eketsehileng-tlase voltage)
- Ho qhaqholla: Ho theola feela hula konopo ea sutu ho tloha boto ea potoloho e kentsoeng leboteng.
- Tekanyo ea ts'ireletsoTlhaloso: IP20
- Tekanyo ea ts'ireletso: IP40 bakeng sa motsoako oa mochine le sefahleho
- Khanyetso ea kameho: Kamora ho phahama, khanyetso ea IK06 e tiisitsoe.
- Litekanyo (HxWxD): 44.5 x 44.5 x 8.6 mm
- Ho tšoaea: CE
- www.niko.eu
Litlhaloso
- Lebitso la Sehlahiswa: Konopo ea Hane ea Push e nang le li-LED le Comfort Sensors
- Tšebelisano: Niko Home Control
- Mmala: White Coated
- Nomoro ea Mohlala: 154-52204
- Tiisetso: 1 selemo
- Websebaka: www.niko.eu
- Letsatsi la Tlhahiso: 12-06-2024
LBH
P: Nka reset konopo ea push joang?
A: Ho seta konopo ea ho sututsa bocha, batla konopo ea reset sesebelisoa ebe u e tobetsa ka metsotsoana e 10 ho fihlela li-LED li panya.
P: A na nka kenya li-unit tse ngata ka likamoreng tse fapaneng?
A: E, o ka kenya likonopo tse ngata tsa ho sututsa ka likamoreng tse fapaneng 'me oa li laola ka sistimi ea Niko Home Control.
P: Mebala e fapaneng ea LED e bontša eng?
K: Mebala ea LED e bonts'a maemo a fapaneng joalo ka matla a ho tima, ho kenya tšebetsong, kapa maemo a phoso. Sheba buka ea mosebedisi bakeng sa lintlha tse tobileng.
Litokomane / Lisebelisoa
 |
niko Konopo ea Push hane e nang le li-LED le li-sensor tsa Comfort [pdf] Buka ea Mong'a 154-52204, Konopo ea Hane e Push e nang le LED le Comfort Sensors, Push Button e nang le LED le Comfort Sensors, Konopo e nang le LED le Comfort Sensors, LED le Comfort Sensors, Comfort Sensors, Comfort Sensors. |
