Nektar LX49+ Impact Controller keyboard Manual
Lahla sehlahisoa ka mokhoa o sireletsehileng, ho qoba ho pepesehela mehloli ea lijo le metsi a ka tlas'a lefatše. Sebelisa sehlahisoa feela ho latela litaelo.
Hlokomela: Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, tlas'a karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa, e sebelisa, 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ke litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio.
Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Ha re re sesebelisoa sena se baka tšitiso e kotsi ho kamohelo ea seea-le-moea kapa ea thelevishene, e ka lekanyetsoang ka ho tima le ho bulela sesebelisoa. Boemong boo, mosebelisi o khothaletsoa ho leka ho lokisa tšitiso ka e le 'ngoe kapa tse ling tsa mehato e latelang:
- Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
- Eketsa karohano pakeng tsa thepa le moamoheli.
- Hokela lisebelisoa le seketsoaneng sa potoloho se fapaneng le seo moamoheli a hokahaneng le sona.
- Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.
CALIFORNIA PROP65
TLHOKOMELISO:
Sehlahisoa sena se na le lik'hemik'hale tse tsejoang ke Naha ea California tse bakang mofetše le likoli tsa tlhaho kapa likotsi tse ling tsa ho ikatisa. Bakeng sa tlhaiso-leseling e batsi: www.nektartech.com/prop65 Firmware ea Impact, software, le litokomane ke thepa ea Nektar Technology, Inc. 'me li tlas'a Tumellano ea License. 2016 Nektar Technology, Inc. Litlhaloso tsohle li ka fetoha ntle le tsebiso. Nektar ke lets'oao la khoebo la Nektar Technology, Inc.
Selelekela
Rea leboha ka ho reka keyboard ea Nektar Impact LX+. Li-controller tsa Impact LX+ li fumaneha ka mefuta ea lintlha tse 25, 49, 61, le 88 'me li tla le software ea ho seta bakeng sa li-DAW tse ngata tse tsebahalang. Sena se bolela hore bakeng sa li-DAW tse tšehelitsoeng, mosebetsi oa ho seta o entsoe haholo mme o ka tsepamisa maikutlo ho holiseng pono ea hau ea boqapi ka molaoli oa hau e mocha. Ts'ehetso ea Nektar DAW e eketsa ts'ebetso e etsang hore boiphihlelo ba mosebelisi bo be pepeneneng ha o kopanya matla a komporo ea hau le Nektar Impact LX+.
Ho pholletsa le tataiso ena, re bua ka Impact LX+ moo temana e sebetsang ho LX49+ le LX61+. Mehlala e sebetsa ka ho tšoana, ntle le moo ho bontšitsoeng bukeng ena. Ntle le moo, mofuta oa Impact LX+ o lumella taolo e felletseng ea MIDI e ka lokisoang ke mosebelisi kahoo haeba u khetha ho theha litlhophiso tsa hau, le uena u ka etsa joalo. Re ts'epa hore o tla natefeloa ke ho bapala, ho sebelisa, le ho ba boqapi ka Impact LX+ ka moo re thabetseng ho e theha.
Litaba tsa Lebokose
Lebokose la hau la Impact LX+ le na le lintho tse latelang:
- The Impact LX+ Controller Keyboard
- Tataiso e hatisitsoeng
- Mohala o tloaelehileng oa USB
- Karete e nang le khoutu ea laesense bakeng sa kenyelletso ea software
- Haeba e 'ngoe ea lintho tse kaholimo e le sieo, ka kopo re tsebise ka lengolo-tsoibila: stuffmissing@nektartech.com
Likarolo tsa Impact LX49+ le LX61+
- 49 kapa 61 linotlolo tsa boholo bo felletseng tse utloang lebelo
- 5 Litlhophiso tsa mosebelisi tse lokisehang
- Li-pads tse 8 tse utloang lebelo, tse bonesitsoeng ka LED
- Li-presets tse 2 tse baloang feela (Mixer/Seletsa)
- Lifaele tse 9 tse fuoang MIDI
- Li-presets tse 4 tsa 'mapa
- Likonopo tse 9 tse ka abeloang MIDI
- Mesebetsi ea Shift bakeng sa kopanyo ea Nektar DAW
- Lipitsa tse 8 tsa taolo ea MIDI
- Pontšo ea LED ea litlhaku tse 3, likarolo tse 7 tsa LED
- 1 Konopo ea leqephe la lisebelisoa bakeng sa kopanyo ea Nektar DAW feela
- Boema-kepe ba USB (ka morao) 'me bo tsamaisoa ka bese ea USB
- 6 likonopo tsa lipalangoang
- Motlakase oa ho tima/ tima (ka morao)
- Pitch Bend le Mabili a Modulation (a abeloa)
- Likonopo tsa octave holimo/tlase
- 1/4" jack Foot Switch socket (Ka morao)
- Likonopo tsa ho fetolela holimo/tlase
- Hokela ho iPad ka Apple USB Camera Connection Kit
- Likonopo tsa Mixer, Instrument, le Preset
- Khokahano ea tšehetso ea Nektar DAW
- Likonopo tse 5 tsa ts'ebetso ho kenyelletsa Mute, Snapshot, Null,
Pad Ithute le ho Seta
Bonyane Litlhoko tsa Tsamaiso
Joalo ka sesebelisoa se lumellanang le maemo a USB, Impact LX+ e ka sebelisoa ho tsoa ho Windows XP kapa ho feta le mofuta ofe kapa ofe oa Mac OS X. Khokahano ea DAW files e ka kenngoa ho Windows Vista/7/8/10 kapa ho feta le Mac OS X 10.7 kapa ho feta.
Rea qala
Khokahano le Matla
Impact LX+ e lumellana le Sehlopha sa USB. Sena se bolela hore ha ho na mokhanni ea ka kenyang ho etsa hore keyboard e thehe komporo ea hau. Impact LX+ e sebelisa mokhanni o hahelletsoeng oa USB MIDI oo e seng e le karolo ea sistimi ea hau ea ts'ebetso ho Windows le OS X.
Sena se etsa hore mehato ea pele e be bonolo
- Fumana thapo ea USB e kenyellelitsoeng 'me u hokele ntlha e' ngoe khomphuteng ea hau 'me e 'ngoe ho Impact LX+ ea hau
- Haeba u batla ho hokela switch ea leoto ho laola ts'ebetso, e hokele ka har'a sokete ea 1/4 ”e ka morao ho keyboard.
- Seta sesebelisoa sa motlakase se ka morao ho yuniti ho Bulela
- Khomphuta ea hau joale e tla qeta metsotso e seng mekae e tsebahatsa Impact LX+ 'me ka mor'a moo, u tla khona ho e lokisetsa DAW ea hau.
Nektar DAW Kopanyo
Haeba DAW ea hau e ts'ehelitsoe ka software ea khokahano ea Nektar DAW, u tla hloka ho qala ak'haonte ea mosebelisi ho rona. websebaka sa marang-rang 'me ka mor'a moo u ngolise sehlahisoa sa hau ho fumana monyetla oa ho fumana se ka jarollwang filee sebetsa sehlahisoa sa hau.
Qala ka ho theha ak'haonte ea mosebelisi ea Nektar mona: www.nektartech.com/registration Ka mor'a moo, latela litaelo tse fanoeng ho ngolisa sehlahisoa sa hau, 'me qetellong u tobetse sehokelo sa "My Downloads" ho fihlella files.
BOHLOKOA: Etsa bonnete ba hore u bala litaelo tsa ho kenya ka har'a tataiso ea PDF, e kenyelelitsoeng sephutheloana se jarollotsoeng, ho netefatsa hore ha u fose mohato oa bohlokoa.
Ho sebelisa Impact LX+ joalo ka Molaoli oa MIDI oa USB oa Generic
Ha ho hlokahale hore o ngolise Impact LX+ ea hau ho sebelisa molaoli oa hau joalo ka molaoli oa USB MIDI. E tla sebetsa joalo ka sehlopha sa USB sesebelisoa ho OS X, Windows, iOS, le Linux.
Leha ho le joalo, ho na le melemo e mengata ea ho ngolisa sehlahisoa sa hau:
- Tsebiso ea lintlafatso tse ncha ho kopanyo ea Impact LX+ DAW ea hau
- Khoasollo ea PDF ea bukana ena hammoho le kopanyo ea morao-rao ea DAW files
- Ho fihlella imeile ea rona tšehetso ea tekheniki
- Ts'ebeletso ea tiisetso
Keyboard, Octave, le Transpose
Khiboto ea Impact LX+ e na le kutloelo-bohloko ea lebelo kahoo o ka khona ho bapala seletsa ka mokhoa o hlakileng. Ho na le li-curve tse 4 tse fapaneng tseo u ka khethang ho tsona, e 'ngoe le e' ngoe e na le matla a fapaneng. Ho feta moo, ho na le litlhophiso tse 3 tsa lebelo le tsitsitseng. Re khothaletsa hore o qete nako e nyane o bapala ka lebelo la "belocity curve" mme o bone hore na o hloka kutlo e batlang e le tlase kapa e nyane. U ka ithuta haholoanyane ka li-curve tsa lebelo le mokhoa oa ho li khetha leqepheng la 18 Octave Shift Ka ho le letšehali la keyboard, u fumana likonopo tsa shift ea Octave le Transpose.
- Nako le nako ha o tobetsa, konopo e ka ho le letšehali ea Octave e tla theola keyboard tlase octave e le 'ngoe.
- Konopo e nepahetseng ea Octave le eona e tla fetola keyboard ho 1 octave ka nako eo e hatelitsoeng.
- Bophahamo boo u ka bo suthisetsang keyboard ea LX+ ke li-octave tse 3 ho ea tlase le li-octave tse 4 holimo 'me LX+61 e ka suthisoa li-octave tse 3 holimo.
- Sena se akaretsa mefuta eohle ea keyboard ea MIDI ea lintlha tse 127.
Lenaneo, MIDI Channel, le Taolo ea Preset ka Likonopo tsa Octave
Likonopo tsa Octave le tsona li ka sebelisoa ho romella melaetsa ea lenaneo la MIDI, ho fetola kanale ea Global MIDI, kapa ho khetha litlhophiso tsa taolo ea Impact LX+. Ho fetola ts'ebetso ea li-buttons:
- Tobetsa likonopo tse peli tsa Octave ka nako e le 'ngoe.
- Pontšo joale e tla bonts'a khutsufatso ea hona joale ea kabelo bakeng sa motsotsoana o le mong.
- Tobetsa konopo ea Octave holimo kapa tlase ho feta likhethong.
- Ka tlase ke lenane la mesebetsi eo likonopo tsa Octave li ka abeloang ho li laola.
- Kholomo ea Display e bonts'a khutsufatso ea mongolo bakeng sa tšebetso ka 'ngoe joalo ka ha e hlaha ponts'ong ea Impact LX+.
Tshebetso e dula e abetswe dikonopo ho fihlela tshebetso e nngwe e kgethwa.
| Pontšo | Mosebetsi | Boleng ba Boleng |
| Oct | Shift Octave holimo/tlase | -3/+4 (LX61+:+3) |
| PrG | E romella melaetsa ea phetoho ea MIDI | 0-127 |
| GCH | Fetola mocha oa Global MIDI | 1 ho ea ho 16 |
| TLHALOSO | Khetha efe kapa efe ea li-presets tse 5 tsa taolo | 1 ho ea ho 5 |
- Ka mor'a ho tsamaisa baesekele ea motlakase, mosebetsi oa kamehla oa khethoa.
Transpose, Program, MIDI Channel, le Preset le Likonopo tsa Transpose
Likonopo tsa Transpose li sebetsa ka tsela e ts'oanang le likonopo tsa Octave ka likhetho tse latelang tsa ts'ebetso:
| Pontšo | Mosebetsi | Boleng ba Boleng |
| trA | Fetolela keyboard hodimo kapa tlase | -/+ 12 li-semitone |
| PrG | E romella melaetsa ea phetoho ea MIDI | 0-127 |
| GCH | Fetola mocha oa Global MIDI | 1 ho ea ho 16 |
| TLHALOSO | Khetha efe kapa efe ea li-presets tse 5 tsa taolo | 1 ho ea ho 5 |
Wheels le Foot Switch
Pitch Bend le Mabili a Modulation
Mabili a mabeli a ka tlase ho likonopo tsa Octave le Transpose hangata a sebelisoa bakeng sa Pitch bend le Modulation. Lebili la Pitch bend le laeloa nakong ea selemo 'me le khutlela boemong ba lona bohareng ha le lokolloa. Ho loketse ho koba lintlha ha u ntse u bapala mantsoe a hlokang mokhoa ona oa ho hlalosa. Sebaka sa bend se khethoa ke sesebelisoa se amohelang. Lebili la Modulation le ka behoa ka bolokolohi 'me le hlophisitsoe ho laola modulation ka kamehla. Ka bobeli Pitch bend le lebili la Modulation li ka abeloa MIDI ka litlhophiso tse bolokiloeng holim'a baesekele ea matla hore u se ke oa lahleheloa ke tsona ha u tima yuniti. Likabelo tsa Pitch bend le Modulation ha se karolo ea li-presets tsa Impact LX+.
Leoto switjha
O ka hokela leoto la switjha pedal (ka boikhethelo, ha e kenyelelitsoe) ho 1/4” jack socket ka morao ho keyboard ea Impact LX+. Polarity e nepahetseng e bonoa ka bo eona ha o qala, kahoo haeba o hokela switch ea leoto ka mor'a hore boot-up e phethe, u ka fumana hore switch ea leoto e sebetsa ka morao. Ho lokisa seo, etsa se latelang
- Tlosa Impact LX+
- Etsa bonnete ba hore sesebelisoa sa hau sa leoto se hokahane
- Fetolela Impact LX+
- Polarity ea switjha ea leoto joale e lokela ho bonoa ka bo eona.
Ho laola MIDI Software
Impact LX+ e na le phetoho e makatsang ha ho tluoa tabeng ea ho laola DAW kapa software e 'ngoe ea MIDI. Ka tloaelo ho na le mekhoa e 3 e fapaneng ea ho theha taolo e ngata ea Impact LX+, leha ho tloaelehile ho sebelisa mekhoa e fapaneng.
- Kenya khokahano ea Impact DAW files bakeng sa tšebeliso le DAW e teng (e tlameha ho ba lethathamong la rona le tšehetsoeng)
- Theha DAW ka ho ithuta ka taolo
- Litaolo tsa Programming Impact LX+ bakeng sa software ea hau
- Khetho ea 1 e hloka feela ho kenngoa ha kopano ea rona ea DAW files le ho latela tataiso e kenyellelitsoeng ea PDF.
- U tla hloka ho theha mosebelisi mona: www.nektartech.com/registration 'me u ngolise LX+ ea hau ho fumana phihlello ea files le tataiso ea basebelisi ba PDF.
- Haeba u rera ho sebelisa li-DAWs tsa hau ithute ts'ebetso kapa li-presets tsa litlamorao hamoraotage, re khothaletsa ho bala khaolo ena ho utloisisa hore na Impact LX+ e hlophisitsoe joang. A re qaleng ka ho qetelaview ya se bolokoang mohopolong.
Mixer, Seletsa, le Presets
Impact LX+ e na le li-presets tse 5 tse lokisoang ke mosebelisi le hoja bonneteng, kakaretso ea li-presets tse ka sebelisoang ke 7. Ke hobane likonopo tsa Mixer le Instrument e 'ngoe le e' ngoe e hopola setaele se baloang feela. Setaele se na le litlhophiso tsa taolo bakeng sa li-fader tse 9, likonopo tse 9 tsa fader le lipitsa tse 8. Konopo ea Preset e hopotsa mosebelisi e seng e khethiloe hajoale 'me ho na le mekhoa e 3 e fapaneng eo u ka hopolang li-presets tse 5:
- Tobetsa 'me u hatelle [Preset] ha u ntse u sebelisa -/+ linotlolo (C3/C#3) ho fetola khetho e seng e setiloe.
- Abela likonopo tsa Octave kapa Transpose ho fetola se seng (se hlalositsoe leqepheng la 6)
- Sebelisa menu ea Setup ho kenya Preset e itseng
- Ka tlase ke lethathamo la seo e 'ngoe le e 'ngoe ea li-presets tse 5 e reriloeng ho eona ka ho sa feleng. E 'ngoe le e' ngoe e ka hlophisoa ka li-setting tsa hau tsa MIDI tseo re tla li bua hamorao.
| Seta pele | Tlhaloso |
| 1 | GM Seletsa esale pele |
| 2 | GM Mixer ch 1-8 |
| 3 | GM Mixer ch 9-16 |
| 4 | Ithute 1 ea botsoalle (Likonopo tsa Fader Toggle) |
| 5 | Ithute 2 ea botsoalle (Likonopo tsa Fader Trigger) |
Li-Presets 1, 4, le 5 li hlophisitsoe hore li fetisetsoe mocha oa lefats'e oa MIDI. Ha o fetola kanale ea lefats'e ea MIDI (joalo ka ha ho hlalositsoe pejana, o ka sebelisa likonopo tsa Octave le Transpose ho etsa sena ka nako efe kapa efe) o fetola mocha oa MIDI oo li-presets tsena li fetisang ho ona. Ka liteishene tse 16 tsa MIDI tse fumanehang ho bolela hore u ka theha li-setups tse 16 tse ikhethileng 'me u fetole mocha oa MIDI hore o fetohe lipakeng tsa tsona. Lenane la likabelo tsa taolo bakeng sa e 'ngoe le e 'ngoe ea li-presets tse 5 le fumaneha leqepheng la 22-26.
Ho laola MIDI Software (tsoela pele)
Litaolo tsa Lefatše
Litaolo tsa lefats'e ke li-control tse sa bolokoang sebakeng sa pele, ka hona, Pitch bend/Modulation wheels hammoho le Foot Switch li oela sehlopheng sena. Likonopo tse 6 tsa lipalangoang, ho feta moo, le tsona ke taolo ea lefats'e, 'me likabelo li bolokiloe holim'a libaesekele tsa motlakase. Ha u ntse u fetola li-presets kapa u lokisa li-control tse seng li setiloe, taolo ea lefats'e e lula e sa fetohe. Sena sea utloahala kaha Litaolo tsa Lipalangoang le keyboard hangata li etselitsoe ho etsa ntho e le 'ngoe ka ho khetheha.
Likonopo tsa Mosebetsi
Mola oa bobeli oa likonopo tse ka tlase ho ponts'o e na le li-button tse 5 tsa tšebetso le li-menu. Mesebetsi ea mantlha ea konopo ke ho fetola pina
le li-patches ho DAWs tse tšehetsoeng ke Nektar DAW Integration. Se latelang se hlalosa mosebetsi oa bona oa bobeli.
Shift/Ho homola
Ha o tobetsa le ho tšoara konopo ena, tlhahiso ea MIDI ho tsoa ho li-control tsa nako ea nnete ea khutsisoa. Sena se o lumella ho beha li-fader le lipitsa ntle le ho romella data ea MIDI. Ho feta moo, ho tobetsa konopo ena ho kenya tšebetsong mesebetsi ea bobeli ea likonopo, tse bontšitsoeng ka tlase ho likonopo tseo. Joalo ka mohlalaample, tobetsa o hatelle [Shift/Mute]+[Pad 4] e tla kenya Pad Map 4. Tobetsa o hatelle [Shift/Mute]+[Pad 2] e tla kenya Pad Map 2.
Senepe
Ho tobetsa [Shift]+[Snapshot] ho tla romela boemo ba hajoale ba li-fader le lipitsa. Sena se ka sebelisoa ka bobeli e le tšobotsi ea ho hopola maemo hape e le tšobotsi e monate ea liteko ho fetola liparamente ntle le ho tseba hantle hore na ho tla etsahala eng.
Null
Khokahano ea Impact ea DAW files li na le ts'ebetso ea ho ts'oara kapa ea ho nka e bonolo e qobang ho tlola holimo ka ho liehisa lintlafatso tsa paramethara ho fihlela boemo ba taolo ea 'mele bo lumellana le boleng ba litekanyetso. Mosebetsi oa Null o sebetsa ka mokhoa o ts'oanang empa ha o itšetlehe ka maikutlo a tsoang ho software ea hau ho o fihlela. E hopola litlhophiso tsa paramethara ea hau, ha u fetoha pakeng tsa, li-presets e le hore u fumane litekanyetso tsa parameter kapa "null".
Example
- Khetha [Preset] 'me u netefatse hore [Shift]+[Null] e setiloe.
- Seta likonopo tsa Transpose (kapa Octave) ho fetola litlhophiso (joalo ka ha ho hlalositsoe pejana) ebe u khetha Preset 1.
- Tsamaisa Fader 1 ho ea holimo (127).
- Kgetha Preset 2 o sebedisa dikonopo tsa Transpose.
- Tsamaisa fader 1 ho bonyane (000).
- Kgetha Preset 1 o sebedisa dikonopo tsa Transpose.
- Tlosa Fader 1 hole le boemo ba eona bo tlase 'me u hlokomele hore ponts'o e baleha "Holimo" ho fihlela u fihla 127.
- Khetha Preset 2 'me u suthise fader hole le boemo bo phahameng. Hlokomela hore pontšo e baleha 'dn' ho fihlela u fihla ho 000.
Ha "up" kapa "dn" e bonts'oa, ha ho na litekanyetso tsa ntlafatso ea taolo tse romelloang ho software ea hau. Null setting e ikemetse bakeng sa Mixer, Inst., le Preset. Ho bulela kapa ho tima sesebelisoa, khetha pele [Preset] ebe u tobetsa [Shift]+[Null] ho fihlela u bona boemo boo u bo batlang (ho buletsoe/ho tima). Tobetsa [Mixer] kapa [Inst] e lateloe ke ho tobetsa [Shift}+[Null] ho seta litlhophiso bakeng sa e 'ngoe le e 'ngoe ea likhetho tsena. Haeba u sebelisa Nektar Integrated DAW support, ka kopo etsa bonnete ba hore u sheba litaelo tsa ho seta bakeng sa DAW ea hau. Ka linako tse ling Null e tlameha ho tima hobane Impact LX+ e sebelisa mokhoa o fapaneng ho qoba ho tlola holimo.
Pad Ithute
Pad Learn e u lumella ho khetha pad kapele le ho ithuta mosebetsi oa ho ngola ka ho tobetsa konopo ho keyboard. Sena se hlalositsoe ka ho qaqileng haholoanyane karolong e latelang mabapi le li-Pads. Ho kenya tshebetsong Pad Learn, tobetsa [Shift]+[Pad Learn].
Tlhophiso
Ho tobetsa [Shift]+[Setup] ho tla khutsisa tlhahiso ea keyboard mme ho e-na le hoo ho kenye letsoho manane a ho seta a fumanehang ka keyboard. Eya leqepheng la 14 bakeng sa tlhahisoleseding e feletseng mabapi le dimenu tsa ho seta.
Liphatlalatso
Li-pads tse 8 li utloisisa lebelo ebile li ka hlophiseha ka melaetsa kapa melaetsa ea switjha ea MIDI. Sena se bolela hore o ka li sebelisa e le likonopo tse tloaelehileng tsa MIDI hammoho le ho letsa morethetho oa meropa ea hau le likarolo tsa 'mino oa percussive. Ntle le moo, li-pads li na le likhetho tse 4 tsa lebelo la lebelo le likhetho tse 3 tse tsitsitseng tsa lebelo tseo u ka khethang ho tsona, ho latela seo u se etsang le mokhoa oa hau oa ho bapala.
Limmapa tsa Pad
O ka kenya le ho boloka litlhophiso tse 4 tse fapaneng libakeng tsa memori tse 4 tse bitsoang limmapa tsa Pad. Tsela ea ho kenya limmapa tsa marang-rang ke ena:
- Tobetsa 'me u tšoare konopo ea [Shift/Mute]. Thepa e tsamaellanang le 'mapa oa pad o kentsoeng hajoale o lokela ho bonesoa.
- Tobetsa pad e tsamaellanang le 'mapa oa pad oo u batlang ho o hopola. 'Mapa oa marang-rang o se o kentsoe.
- Leqephe la 13 le bonts'a mesebetsi ea kamehla ea limmapa tse 4. 'Mapa oa 1 ke sekala sa chromatic se tsoelang pele 'Mapeng oa 2.
- Haeba u na le setaele sa meropa se behiloeng ka tsela ena (tse ngata li) u ka fihlella meropa 1-8 u sebelisa 'Mapa oa 1 le meropa 9-16 u sebelisa 'Mapa oa 2.
Pad Ithute
Ho bonolo ho fetola likabelo tsa lintlha tsa pad u sebelisa ts'ebetso ea Pad Learn. E sebetsa ka tsela e latelang:
- Tobetsa motsoako oa konopo ea tšebetso [Shift]+[Pad Learn]. Pontšo joale e tla benya, e bonts'a P1 (pad 1) e le sebaka se khethiloeng sa kamehla.
- Tobetsa pad eo u batlang ho fana ka boleng bo bocha ho eona. Pontšo ea panya le liapdeite ho bontša palo ea pad eo u e khethileng.
- Tobetsa konopo ho keyboard e tsamaellanang le molaetsa oo u batlang ho o abela pad. O ka nna wa bapala dinoutu ho keyboard ho fihlela o fumane mongolo oo o o batlang.
- Ha u qetile, tobetsa [Shift]+[Pad Learn] ho tsoa 'me u qale ho bapala lipampiri tsa hau ka mosebetsi o mocha.
- U ka lula u pheta mehato ea 2. le 3. ho fihlela u entse Pad Map e felletseng.
Lenaneo la Melaetsa ea MIDI ho li-Pads
Li-pads li ka sebelisoa hape joalo ka likonopo tsa MIDI. Ho ithuta haholoanyane, sheba karolo ea Setupo e buang ka hore na li-control li hlophisoa joang.
Pad Velocity Curves
U ka khetha pakeng tsa 4 velocity curves le 3 e tsitsitseng velocity value options. Bakeng sa tlhaiso-leseling e batsi mabapi le li-curve tsa lebelo le mokhoa oa ho li khetha, bala ka Menu ea ho Seta, 'me u ee leqepheng la 19 bakeng sa lintlha tse mabapi le li-curve tsa pad velocity.
Likonopo tsa Clip & Scenes
Likonopo tse peli tsa Clips & Scenes li boloketsoe ho kopanngoa ha Nektar DAW 'me ha li na mosebetsi ho seng joalo.
Seo Mebala ea LED ea Pad e U Bolellang sona
- Khoutu ea mebala ea pad e fana ka leseli mabapi le boemo ba eona ba hajoale. Ha u ntse u fetola limmapa tsa pad, ho etsa mohlala, u tla hlokomela hore lintlha tsa MIDI li tima li fetoha.
Sena se u bolella hore na ke 'mapa ofe oa marang-rang o kentsoeng hajoale.
| PAD MAP | MOLAOLI |
| 1 | Botala |
| 2 | namunu |
| 3 | Bosehla |
| 4 | Khubedu |
- Khoutu ea 'Mapa oa Pad e kaholimo ke 'nete feela ha li-pad li entsoe ka lintlha tsa MIDI. Haeba u hlophisa li-pads ho romella melaetsa e meng ea MIDI, mebala ea pad e hlophisitsoe ka tsela e latelang:
- Lenaneo: Li-LED tsohle tsa pad li tingoe ntle le e 'ngoe e tsamaellanang le molaetsa oa ho qetela o rometsoeng oa Lenaneo la MIDI. Letlapa le sebetsang le bonesitsoe Orange. Sena se o nolofalletsa ho bona hanghang hore na MIDI e sebetsa joang.
- MIDI cc: Letlapa le bonesa ho latela boleng bo rometsoeng. Boleng = 0 ho tima LED. Haeba boleng bo pakeng tsa 1 le 126, 'mala o motala 'me haeba boleng = 127' mala o khubelu.
- Maikutlo a MIDI cc: Haeba DAW ea hau e khona ho araba molaetsa oa MIDI cc (ke ho hlokomoloha boleng bo rometsoeng), molaetsa oa boemo o ka romelloa ho tsoa ho DAW ho kenya pad LED. Ho theha seo, boleng ba pad's Data 1 le Data 2 bo hloka ho ts'oana (sheba Setupo, leqephe la 14 mabapi le boleng ba lenaneo la Data 1 le Data 2) mme DAW ea hau e ka romella maemo a boemo ho khantša pad ka tsela e latelang: Value = 0 tima LED. Haeba boleng bo pakeng tsa 1 le 126, 'mala o motala. Haeba boleng = 127 'mala o khubelu.
- Example: Lenaneo la pad ho romela MIDI cc 45 le ho seta Data 1 le Data 2 ho 0. Beha DAW ea hau ho khutlisetsa MIDI cc 45 ho kenya LED. Ho ipapisitse le boleng bo rometsoeng ho tsoa ho DAW, pad e tla tima, e tala, kapa e khubelu
Litlhophiso tsa kamehla tsa Limmapa tsa Pads
| 'Mapa oa 1 | ||||||
| Hlokomela | Hlokomela No. | Boitsebiso 1 | Boitsebiso 2 | Boitsebiso 3 | Chan | |
| P1 | C1 | 36 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P2 | C#1 | 37 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P3 | D1 | 38 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P4 | D # 1 | 39 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P5 | E1 | 40 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P6 | F1 | 41 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P7 | F # 1 | 42 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P8 | G1 | 43 | 0 | 127 | 0 | Lefatšeng ka bophara |
| 'Mapa oa 2 | ||||||
| Hlokomela | Hlokomela No. | Boitsebiso 1 | Boitsebiso 2 | Boitsebiso 3 | Chan | |
| P1 | G#1 | 44 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P2 | A1 | 45 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P3 | A#1 | 46 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P4 | B1 | 47 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P5 | C2 | 48 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P6 | C#2 | 49 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P7 | D2 | 50 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P8 | D # 2 | 51 | 0 | 127 | 0 | Lefatšeng ka bophara |
| 'Mapa oa 3 | ||||||
| Hlokomela | Hlokomela No. | Boitsebiso 1 | Boitsebiso 2 | Boitsebiso 3 | Chan | |
| P1 | C3 | 60 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P2 | D3 | 62 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P3 | E3 | 64 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P4 | F3 | 65 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P5 | G3 | 67 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P6 | A3 | 69 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P7 | B3 | 71 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P8 | C4 | 72 | 0 | 127 | 0 | Lefatšeng ka bophara |
| 'Mapa oa 4 | ||||||
| Hlokomela | Hlokomela No. | Boitsebiso 1 | Boitsebiso 2 | Boitsebiso 3 | Chan | |
| P1 | C1 | 36 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P2 | D1 | 38 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P3 | F # 1 | 42 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P4 | A#1 | 46 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P5 | G1 | 43 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P6 | A1 | 45 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P7 | C#1 | 37 | 0 | 127 | 0 | Lefatšeng ka bophara |
| P8 | C#2 | 49 | 0 | 127 | 0 | Lefatšeng ka bophara |
Seta Menu
Menu ea Setupo e fana ka phihlello ea lits'ebetso tse ling tse joalo ka taolo e abetsoeng, mojaro, boloka, ho khetha li-curve tsa lebelo, le tse ling. Ho kenya lenane, tobetsa likonopo tsa [Shift]+[Patch>] (Setup). Sena se tla khutsisa tlhahiso ea MIDI ea keyboard mme ho e-na le hoo keyboard e sebelisoa ho khetha menyetla.
Ha menu ea Setupo e sebetsa, ponts'o e tla bonts'a {SET} ka matheba a 3 a panya ha feela menu e ntse e sebetsa. Chate e ka tlase e fana ka ho fetaview ea menyetla e abetsoeng konopo e 'ngoe le e 'ngoe le hore na u bona likhutsufatso life ponts'ong ea Impact LX+ (ho Menu linotlolo lia tšoana bakeng sa bobeli ba Impact LX49+ le LX61+ empa keno ea boleng ka keyboard e holimo ho octave e le 'ngoe ho LX61+. Sheba khatiso ea skrineng unit ho bona hore na ke linotlolo life tseo u lokelang ho li tobetsa, ho kenya boleng.
Mesebetsi e arotsoe ka lihlopha tse peli. Sehlopha sa pele se akaretsang C1-G1 se akaretsa likabelo tsa taolo le boitšoaro, ho kenyeletsoa ho boloka le Mojaro oa li-presets tse 5 le limmapa tse 4 tsa pad. Ha o tobetsa dikonopo sehlopheng sena o qala ho bona kgutsufatso e bontshang tshebetso. Sena se bolela hore o ka tobetsa linotlolo ho fihlela o fumana hantle lethathamo leo o le batlang ntle le ho tšoenyeha ka taolo e fetolang likabelo. Kaha sehlopha sena sa mesebetsi ke tsona tseo ho ka etsahalang hore u tla li sebelisa khafetsa, sena se etsa hore ho be bonolo ho fumana menyetla.
Sehlopha sa bobeli se qalang C2-A2 se akaretsa mesebetsi ea lefats'e le ea ho seta. Boholo ba mesebetsi ea sehlopha sa bobeli e tla u bontša boemo ba bona ha u tobetsa konopo. Leqepheng le latelang, re akaretsa kamoo e 'ngoe le e' ngoe ea menyetla ena e sebetsang kateng. Hlokomela hore litokomane li nka hore u na le kutloisiso ea MIDI ho kenyelletsa hore na e sebetsa le ho itšoara joang. Haeba u sa tloaelane le MIDI, re khothaletsa hore u ithute MIDI pele u etsa liphetoho ho keyboard ea hau. Sebaka se setle sa ho qala ke litokomane tsa software eo u batlang ho e laola kapa MIDI Manufacturers Association www.midi.org
Ho abela Litaolo ho melaetsa ea MIDI
Kaha li-Presets le li-setting tsa liletsa li baloa feela, mesebetsi e 4 ea pele ea C1-E1 e sebetsa feela ho Litlhophiso tsa Pele 'me e ke ke ea khethoa haeba ho khethiloe Motsoako kapa Sesebelisoa sa [Inst.]. Ho kenya mesebetsi e fanoeng ke Setup menu, ka kopo etsa tse latelang:
- Tobetsa [Preset]
- Tobetsa [Shift]+[Patch>] (Setapo)
- Hona joale ponts'o e baleha {SEt} ka matheba a 3 {...} a panya
- Lenaneo la ho Seta le se le sebetsa mme keyboard ha e sa romela lintlha tsa MIDI ha o tobetsa linotlolo.
- Ho tsoa ho Setup menu, tobetsa [Shift]+[Patch>] (Setup) hape neng kapa neng.
Kabelo ea Taolo (C1)
Ts'ebetso ena e u lumella ho fetola nomoro ea MIDI CC ea taolo. (haeba ho hlokahala. Mofuta oa kabelo o tlameha ho ba MIDI CC). Litaolo tse ngata ka ho sa feleng li abeloa ho romella mofuta oa molaetsa oa MIDI CC. Mona ke kamoo e sebetsang kateng:
- Tobetsa C1 e tlase ho keyboard ea hau ho khetha ho Abela Taolo. Pontšo e baleha {CC}
- Tsamaisa kapa tobetsa taolo. Boleng boo u bo bonang ponts'ong ke boleng bo fanoeng hajoale (000-127)
- Fetola boleng ho li-decrements/increments u sebelisa linotlolo tse nang le matšoao a -/+ a bontšitsoeng ka holimo (C3/C#3). Mosebetsi oa boleng ke oa hang-hang, kahoo haeba u tsoa ho Setup menu ka mor'a ho etsa liphetoho, liphetoho tseo li lula li sebetsa
- U ka boela ua kenya boleng bo itseng ka ho sebelisa linotlolo tsa linomoro tse tšoeu tsa G3–B4 (G4-B5 ho LX+61). Tobetsa Enter (C5) ho amohela phetoho.
Kabelo ea Channel ea MIDI (D1)
Taolo e 'ngoe le e' ngoe e ka har'a setaele e ka abeloa ho romella mocha o itseng oa MIDI kapa ho latela mocha oa Global MIDI.
- Tobetsa D1. Pontšo e baleha {Ch}
- Tsamaisa kapa tobetsa taolo. Boleng boo u bo bonang ponts'ong ke mocha oa MIDI o fanoeng hajoale (000-16). Litlhaloso tsa MIDI li lumella liteishene tse 16 tsa MIDI.
- Ntle le moo, Impact LX+ e u fa khetho ea ho khetha 000 e leng khetho ea mocha oa Global MIDI. Boholo ba li-presets tsa kamehla li abela mocha oa Global MIDI oa taolo hore o tle o bone boleng bona ha o tsamaisa taolo.
- Fetola boleng ho li-decrements/increments u sebelisa linotlolo tse nang le matšoao a -/+ a bontšitsoeng ka holimo (C3/C#3). Mosebetsi oa boleng ke oa hang-hang, kahoo haeba u tsoa ho Setup menu ka mor'a ho etsa liphetoho, liphetoho tseo li lula li sebetsa
- U ka boela ua kenya boleng bo itseng ka ho sebelisa linotlolo tsa linomoro tse tšoeu tsa G3–B4 (G4-B5 ho LX+61). Tobetsa Enter (C5) ho amohela phetoho.
Mefuta ea likabelo (E1)
Bongata ba litaolo tse behiloeng esale pele li abeloa melaetsa ea MIDI CC. Empa ho na le likhetho tse ling tse 'maloa mme chate e ka tlase e u bontša tse fumanehang bakeng sa mefuta e' meli ea litsamaiso.
| Mofuta oa Molaoli | Mofuta oa Kabelo | Hlahisa Likhutsufatso |
| Ho kobeha ha molumo, Lebili la ho feto-fetoha ha molumo, Faders 1-9, | MIDI CC | CC |
| Aftertouch | At | |
| Sekoti se koaloang | Pbd | |
| Likonopo tsa 1-9, likonopo tsa Lipalangoang, Fetoha ea Leoto, Liphaephe 1-8 | MIDI CC Fetolela | ho G |
| MIDI CC Trigger/Release | trG | |
| Tlhaloso ea MIDI | n | |
| Phetoho ea lintlha tsa MIDI | NT | |
| Taolo ea Mochine oa MIDI | inc | |
| Lenaneo | Prg |
Ho fetola mofuta oa mosebetsi, etsa se latelang
- Tobetsa E1 ho keyboard ea hau ho khetha Abela Likhetho. Pontšo e baleha {ASG}
- Tsamaisa kapa tobetsa taolo. Kgutsufatso ya mofuta oo o e bonang pontshong ke mofuta o abetsweng hona jwale ho ya ka chate e ka hodimo
- Fetola boleng ho li-decrements/increments u sebelisa linotlolo tse nang le matšoao a -/+ a bontšitsoeng ka holimo (C3/C#3). Phetoho ea mofuta e teng hang-hang, kahoo haeba u tsoa ho Setup menu ka mor'a ho etsa liphetoho, liphetoho tseo li lula li sebetsa
- Lintlha tsa 1 le Lintlha tsa 2 (C#1 & D#1)
- Ts'ebetso ea Data 1 le Data 2 lia hlokahala bakeng sa likabelo tse ling tsa taolo ho latela chate e ka tlase.
Ho kenya boleng ba Data 1 kapa Data 2, etsa se latelang
- Tobetsa C#1 kapa D#1 keyboard ea hau ho khetha Data 1 kapa Data 2. Pontšo e baleha tjena {d1} kapa {d2}
- Tsamaisa kapa tobetsa taolo. Litaolo tsa data 1 kapa boleng ba data 2 li tla bonahala ponts'o
- Fetola boleng ho li-decrements/increments u sebelisa linotlolo tse nang le matšoao a -/+ a bontšitsoeng ka holimo (C3/C#3).
- Mosebetsi oa boleng ke oa hang-hang, kahoo haeba u tsoa ho Setup menu ka mor'a ho etsa liphetoho, liphetoho tseo li lula li sebetsa
- U ka boela ua kenya boleng bo itseng ka ho sebelisa linotlolo tsa linomoro tse tšoeu tsa G3–B4 (G4-B5 ho LX+61). Tobetsa Enter (C5) ho amohela phetoho.
| Mofuta oa Molaoli | Mofuta oa Kabelo | Boitsebiso 1 | Boitsebiso2 |
| Ho kobeha ha molumo, Lebili la Modulation, Faders 1-9, Lipitsa 1-8 | MIDI CC | Boholo ba boleng | Bonyane ba boleng |
| Aftertouch | Boholo ba boleng | Bonyane ba boleng | |
| Sekoti se koaloang | Boholo ba boleng | Bonyane ba boleng | |
| Likonopo 1-9, likonopo tsa Lipalangoang, Fetoha ea Leoto | MIDI CC Fetolela | CC boleng 1 | CC boleng 2 |
| MIDI CC Trigger/Release | Boleng ba ho Qala | Boleng ba tokollo | |
| Tlhaloso ea MIDI | Hlokomela ka lebelo | Noto ea MIDI # | |
| Taolo ea Mochine oa MIDI | n/a | Sub-ID #2 | |
| Lenaneo | n/a | Boleng ba molaetsa |
Drawbar On/Off (F1)
Mosebetsi oa Drawbar o khutlisetsa morao boleng ba lihlahisoa tse 9 ho tloha ho 0-127 ho ea ho 127-0. Sena se ka boela sa finyelloa ka ho fetola litekanyetso tsa min / max tsa taolo ha u hlophisa Data 1 le Data 2. Leha ho le joalo, haeba u sa batle ho fetola phetoho ka ho sa feleng sebakeng sa hau sa pele, mosebetsi ona o loketse, 'me mona ke kamoo ho e kenya tshebetsong:
- Tobetsa F1. Pontšo e tla bonts'a {drb} ebe e fapanyetsana le boemo ba ts'ebetso (ho tima kapa ho tima)
- Fetola boemo, u sebelisa linotlolo tse nang le -/+ matšoao a bontšitsoeng ka holimo (C3/C#3)
- Phetoho e teng hanghang, kahoo ho leka tlhophiso, tobetsa feela [Shift]+[Setup] ho tsoa ho Setup menu.
Boloka li-Presets le Pad Maps (F#1)
Ha o etsa liphetoho tsa kabelo taolong kapa pading, liphetoho li bolokoa sebakeng sa memori sa hajoale se sebetsang 'me li-setting le tsona li bolokoa holim'a baesekele ea motlakase. Leha ho le joalo, haeba u fetola 'mapa o seng o setiloe kapa oa pad litlhophiso tsa hau li tla lahleha hobane data e kentsoeng e tla hlakola liphetoho tseo u li reriloeng. Haeba u sa batle ho lahleheloa ke mosebetsi, re khothaletsa ho boloka hang ha u se u entse setup sa hau. Mona ke mokhoa oa ho etsa joalo:
Boloka Preset
- Tobetsa F#1 ho kenya Save menu. Pontšo e tla bala {SAu} (ee, e tlameha ho ba av)
- Khetha Preset eo u batlang ho e boloka, u sebelisa linotlolo tse nang le matšoao a -/+ a bontšitsoeng ka holimo (C3/C#3).
- Hape o ka kenya nomoro e itseng e seng e setilwe (1-5) o sebedisa dinomoro tsa dinomoro tse tshweu tsa G3–D4 (G4-D5 ho LX+61).
- Tobetsa Enter (C5) ho boloka sebakeng se khethiloeng esale pele (e sebetsang bakeng sa mekhoa e 'meli ea khetho)
Boloka 'Mapa oa Pad
- Tobetsa F3 ho kenya menu ea ho boloka. Pontšo e tla bala {SAu} (ee, e tlameha ho ba av)
- Tobetsa [Enter] (konopo ea ho qetela ea C ho keyboard ea hau) ho netefatsa khetho ea menu
- Tobetsa [Shift] le pad e tsamaellanang le 'mapa oa pad oo u batlang ho boloka litlhophiso tsa pad ea hau ho (1-4)
- Tobetsa Enter (C5) ho boloka sebakeng se khethiloeng sa 'mapa
Kenya Preset (G1)
- Re hlalositse pejana hore na u ka sebelisa likonopo tsa Octave le Transpose joang ho khetha li-presets. Mona ke khetho e 'ngoe ea ho kenya li-presets kahoo ha ua tlameha ho fetola mesebetsi ea hau ea konopo.
- Tobetsa G1 ho kenya lenane la Load. Pontšo e tla bala {Lod} (ho feta Loa, ho joalo?)
- Khetha Preset eo u batlang ho e kenya u sebelisa linotlolo tse nang le matšoao a -/+ a bontšitsoeng ka holimo (C3/C#3). Li-presets li laeloa hang-hang ha u ntse u feta ho tsona.
- Hape o ka kenya nomoro e itseng e seng e setilwe (1-5) o sebedisa dinomoro tsa dinomoro tse tshweu tsa G3–D4 (G4-D5 ho LX+61).
- Tobetsa Enter (C5) ho kenya sebaka se khethiloeng esale pele (e sebetsa feela ha o kenya o sebelisa khetho ea ho kenya nomoro)
Mesebetsi ea Lefatše le Likhetho
Ho fapana le mesebetsi ea Kabelo ea Taolo, mesebetsi ea Global e ka fumaneha ho sa tsotelehe hore na ho khethiloe eng esale pele. 'Me ho pheta-pheta: Ho tobetsa likonopo tsa [Shift]+[Patch>] (Setup) ho tla kenya Setup menu 'me ponts'o e tla bonts'a {SEt} ka matheba a 3 a panya hafeela lenane le ntse le sebetsa. Se latelang se nka hore Setup menu ea sebetsa.
Global MIDI Channel (C2)
Khiboto ea Impact LX+ e lula e fetisetsa ho Global MIDI Channel empa boemo bona bo boetse bo ama taolo efe kapa efe kapa pad e sa abeloang mocha o itseng oa MIDI (ke hore 1-16). Pejana re ithutile hore na likonopo tsa Octave le Transpose li ka hlophisoa joang ho fetola Global MIDI.
Channel empa mona ke khetho e 'ngoe
- Tobetsa konopo ea C2 keyboard ea hau ho khetha Global MIDI Channel. Pontsho e bontsha boleng ba hajoale {001-016}
- Fetola boleng ho li-decrements/increments u sebelisa linotlolo tse nang le matšoao a -/+ a bontšitsoeng ka holimo (C3/C#3).
- Mosebetsi oa boleng ke oa hang-hang, kahoo haeba u tsoa ho Setup menu ka mor'a ho etsa liphetoho, liphetoho tseo li lula li sebetsa
- U ka boela ua kenya boleng bo itseng (1-16) u sebelisa linotlolo tsa linomoro tse tšoeu tse tsamaeang le G3 -B4. Tobetsa Enter (C5) ho amohela phetoho
Keyboard Velocity Curves (C#2)
Ho na le li-curve tse 4 tse fapaneng tsa lebelo la keyboard le maemo a 3 a tsitsitseng a lebelo ao u ka khethang ho a khetha, ho ipapisitse le hore na u batla hore keyboard ea Impact LX+ e bapale hakae.
| Lebitso | Tlhaloso | Hlahisa khutsufatso |
| Tloaelehileng | Tsepamisa maikutlo ho maemo a mahareng ho isa ho a phahameng | uC1 |
| Bonolo | Mokokotlo o matla ka ho fetisisa o tsepamisitseng maemo a tlase ho isa bohareng ba lebelo | uC2 |
| E thata | Tsepamisa maikutlo ho maemo a phahameng a lebelo. Haeba u sa rate ho sebelisa mesifa ea menoana ea hau, ena e kanna ea ba ea hau | uC3 |
| Linear | E hakanngoa le phihlelo ea linear ho tloha tlase ho ea holimo | uC4 |
| Tse 127 li tsitsitse | Boemo bo tsitsitseng ba lebelo ho 127 | uF1 |
| Tse 100 li tsitsitse | Boemo bo tsitsitseng ba lebelo ho 100 | uF2 |
| Tse 64 li tsitsitse | Boemo bo tsitsitseng ba lebelo ho 64 | uF3 |
Mona ke mokhoa oa ho fetola sekhahla sa lebelo
- Tobetsa konopo ea C#2 keyboard ea hau ho khetha Velocity Curve. Pontšo e bonts'a khetho ea hajoale
- Fetola boleng ho li-decrements/increments u sebelisa linotlolo tse nang le matšoao a -/+ a bontšitsoeng ka holimo (C3/C#3).
- Mosebetsi oa boleng ke oa hang-hang, kahoo haeba u tsoa ho Setup menu ka mor'a ho etsa liphetoho, liphetoho tseo li lula li sebetsa
- Hape o ka kenya kgetho e itseng (1-7) o sebedisa dinomoro tse tshweu tse tsamaisanang le A3–G4. Tobetsa Enter (C5) ho amohela.
Pads Velocity Curves (D2)
Ho na le li-curve tse 4 tse fapaneng tsa lebelo le maemo a 3 a tsitsitseng ao u ka khethang ho a khetha, ho ipapisitse le hore na u batla hore Impact LX+ pads e bapale hakae.
| Lebitso | Tlhaloso | Hlahisa khutsufatso |
| Tloaelehileng | Tsepamisa maikutlo ho maemo a mahareng ho isa ho a phahameng | PC1 |
| Bonolo | Mokokotlo o matla ka ho fetisisa o tsepamisitseng maemo a tlase ho isa bohareng ba lebelo | PC2 |
| E thata | Tsepamisa maikutlo ho maemo a phahameng a lebelo. Haeba u sa rate ho sebelisa mesifa ea menoana ea hau, ena e kanna ea ba ea hau | PC3 |
| Linear | E hakanngoa le phihlelo ea linear ho tloha tlase ho ea holimo | PC4 |
| Tse 127 li tsitsitse | Boemo bo tsitsitseng ba lebelo ho 127 | PF1 |
| Tse 100 li tsitsitse | Boemo bo tsitsitseng ba lebelo ho 100 | PF2 |
| Tse 64 li tsitsitse | Boemo bo tsitsitseng ba lebelo ho 64 | PF3 |
Mona ke mokhoa oa ho fetola sekhahla sa lebelo
- Tobetsa konopo ea D2 keyboard ea hau ho khetha Velocity Curve. Pontšo e bonts'a khetho ea hajoale
- Fetola boleng ho li-decrements/increments u sebelisa linotlolo tse nang le matšoao a -/+ a bontšitsoeng ka holimo (C3/C#3).
- Mosebetsi oa boleng ke oa hang-hang, kahoo haeba u tsoa ho Setup menu ka mor'a ho etsa liphetoho, liphetoho tseo li lula li sebetsa
- Hape o ka kenya kgetho e itseng (1-7) o sebedisa dinomoro tse tshweu tse tsamaisanang le A3–G4. Tobetsa Enter (C5) ho amohela phetoho
Tšabo (D#2)
Ho tšoha ho romella lintlha tsohle le ho hlophisa bocha melaetsa eohle ea MIDI ho likanale tse 16 tsa MIDI. Sena se etsahala motsotsong oo o tobetsang D#4 'me Setup menu e tla tsoa ha senotlolo se lokolloa.
Lenaneo (E2)
Pejana tataisong ena, re ile ra bua ka hore na u ka romella melaetsa ea phetoho ea MIDI joang u sebelisa likonopo tsa Octave le Transport. Leha ho le joalo, ho ka 'na ha e-ba le linako tseo likonopo tsa Transpose li etsoang bakeng sa mosebetsi o mong kapa u batla ho romela molaetsa o itseng oa phetoho ea lenaneo la MIDI ntle le hore u inc/dec ho fihla ho oona. Ts'ebetso ena e u lumella ho etsa joalo.
- Tobetsa konopo ea E2 ho keyboard ea hau ho khetha Lenaneo. Pontšo e bontša molaetsa oa ho qetela o rometsoeng oa lenaneo kapa 000 ka ho iketsa
- Fetola boleng ho li-decrements/increments u sebelisa linotlolo tse nang le matšoao a -/+ a bontšitsoeng ka holimo (C3/C#3). Tobetsa Enter (C5) ho amohela phetoho le ho romela molaetsa o khethiloeng oa lenaneo la MIDI.
- U ka boela ua kenya khetho e itseng (0-127) u sebelisa linotlolo tsa linomoro tse tšoeu tse tsamaeang le G3–B4. Tobetsa Enter (C5) ho amohela phetoho
Banka LSB (F2)
Ts'ebetso ena e tla romella molaetsa oa Bank LSB MIDI ho tsoa ho keyboard. Hlokomela, lihlahisoa tse ngata tsa software ha li arabele melaetsa ea phetoho ea Banka empa lihlahisoa tse ngata tsa MIDI li etsa joalo. Mona ke mokhoa oa ho romella molaetsa oa Bank LSB
- Tobetsa konopo ea F2 ho keyboard ea hau ho khetha Bank LSB. Pontšo e bonts'a molaetsa oa ho qetela oa Banka kapa 000 ka ho sa feleng
- Fetola boleng ho li-decrements/increments u sebelisa linotlolo tse nang le matšoao a -/+ a bontšitsoeng ka holimo (C3/C#3). Tobetsa Enter (C5) ho amohela phetoho le ho romela molaetsa o khethiloeng oa Bank LSB.
- U ka boela ua kenya khetho e itseng (0-127) u sebelisa linotlolo tsa linomoro tse tšoeu tse qalang G3–B4 (G4-B5 ho LX+61). Tobetsa Enter (C5) ho amohela phetoho.
Banka MSB (F#2)
Ts'ebetso ena e tla romella molaetsa oa Bank MSB MIDI ho tsoa ho keyboard. Hlokomela, lihlahisoa tse ngata tsa software ha li arabele melaetsa ea phetoho ea Banka empa lihlahisoa tse ngata tsa MIDI li etsa joalo. Mona ke mokhoa oa ho romella molaetsa oa Bank MSB
- Tobetsa konopo ea F#2 keyboard ea hau ho khetha Bank MSB. Pontšo e bonts'a molaetsa oa ho qetela oa Banka kapa 000 ka ho sa feleng
- Fetola boleng ho li-decrements/increments u sebelisa linotlolo tse nang le matšoao a -/+ a bontšitsoeng ka holimo (C3/C#3). Tobetsa Enter (C5) ho amohela phetoho le ho romela molaetsa o khethiloeng oa Bank MSB.
- U ka boela ua kenya khetho e itseng (0-127) u sebelisa linotlolo tsa linomoro tse tšoeu tse qalang G3–B4(G4-B5 ho LX+61). Tobetsa Enter (C5) ho amohela phetoho
Ho Lahlela Memori (G2)
Ts'ebetso ea Memory Dump e tla boloka litlhophiso tsa kabelo ea hau ea hajoale ho kenyelletsa le litlhophiso tse 5 tsa basebelisi ka ho romella data ea MIDI ea sysex. Lintlha li ka tlalehoa ho DAW ea hau kapa ts'ebelisong e 'ngoe e khonang ho rekota data ea sysex ebe e bapaloa hape / ea khutlisetsoa ho keyboard ea hau ea Impact LX+ ha u batla ho kenya litlhophiso tsa hau hape.
Ho romela thotobolo ya memori bakeng sa bekapo
- Etsa bonnete ba hore lenaneo la hau la software ea MIDI le hlophisitsoe 'me le khona ho rekota data ea MIDI Sysex
- Qala ho rekota
- Tobetsa konopo ea G2 keyboard ho kenya ts'ebetso ea ho lahlela memori. Pontšo e baleha {SYS} ha data e ntse e romelloa.
- Emisa ho rekota ha ponts'o e baleha {000}. Litaba tsa memori ea hau ea Impact LX+ joale li lokela ho rekotoa lenaneong la hau la software la MIDI
Ho tsosolosa bekapo
Memory dump/backup MIDI sysex file e ka romelloa ho Impact LX+ ka nako efe kapa efe, ha yuniti e ntse e buletsoe, ho khutlisetsa bekapo. Netefatsa hore Impact LX+ ke moo pina ea MIDI e fellang teng e nang le data ea bekapo. Pontšo e tla bala {SyS} ha data e amoheloa. Hang ha phetiso ea data e phethiloe, backup e khutlisitsoe.
Boemo ba Matla a Tlase(G#2)
LX+ e ka tsamaisoa ka matla a tlase ho nolofalletsa khokahano le matla ho tsoa ho iPad kapa ho boloka matla a betri ha o e sebelisa ka laptop. Ha Low Power Mode e butse, li-LED kaofela li tingoa ruri. Ho nolofalletsa li-LED hape, Mokhoa o Motla oa Matla o lokela ho tima. Ho na le mekhoa e 'maloa eo LX+ e ka kenang le ho tsoa Mode ea Matla a Tlase:
- Ha LX+ e koetsoe, tobetsa 'me u tšoare likonopo tsa [Cycle]+[Record] 'me u bulele yuniti.
- Tlosa likonopo hang ha yuniti e se e le matla. Low Power Mode e se e sebetsa ha yuniti e ntse e butswe.
- Ha e kentsoe ka mokhoa ona, Mokhoa o Motla oa Matla ha o bolokoe ha o tima LX+.
- U ka boela ua seta Mode ea Matla a Tlaase e le hore tlhophiso e bolokehe ha LX+ e tingoe:
- Etsa bonnete ba hore LX+ e buletsoe 'me u kenye [Setup].
- Tobetsa G#2 'me u fetole litlhophiso ho Bulela ka ho sebelisa linotlolo tsa -/+.
Tlhophiso ea Boema-kepe ba USB (A2)
Impact LX+ e na le kou e le 'ngoe ea' mele ea USB leha ho le joalo ho na le likou tse 2 tseo u ka beng u li fumane nakong ea MIDI ea 'mino oa hau.
software. Boema-kepe bo eketsehileng bo sebelisoang ke software ea Impact DAW ho sebetsana le puisano le DAW ea hau. U hloka feela ho fetola tlhophiso ea Setupo sa Boema-kepe ba USB haeba litaelo tsa ho seta tsa Impact LX+ bakeng sa DAW ea hau li eletsa ka kotloloho hore sena se lokela ho etsoa.
Sesebelisoa se secha sa 1 GM
Hlokomela: B9 e abetsoe MIDI cc 65 ho li-presets tsohle tse reretsoeng ho ba teng bakeng sa ts'ebetso ea lefats'e.
| Faders | ||||||
| Ctrl | Mofuta oa Msg | CC | Boitsebiso 1 | Boitsebiso 2 | Chan | Param |
| F1 | MIDI CC | 73 | 127 | 0 | Lefatšeng ka bophara | Tlhaselo |
| F2 | MIDI CC | 75 | 127 | 0 | Lefatšeng ka bophara | Ho bola |
| F3 | MIDI CC | 72 | 127 | 0 | Lefatšeng ka bophara | Lokolla |
| F4 | MIDI CC | 91 | 127 | 0 | Lefatšeng ka bophara | Botebo ba 1 (Boemo ba ho Romela Leetsi) |
| F5 | MIDI CC | 92 | 127 | 0 | Lefatšeng ka bophara | Botebo ba 2 |
| F6 | MIDI CC | 93 | 127 | 0 | Lefatšeng ka bophara | Botebo ba 3 (Boemo ba ho romella Chorus) |
| F7 | MIDI CC | 94 | 127 | 0 | Lefatšeng ka bophara | Botebo ba 4 |
| F8 | MIDI CC | 95 | 127 | 0 | Lefatšeng ka bophara | Botebo ba 5 |
| F9 | MIDI CC | 7 | 127 | 0 | Lefatšeng ka bophara | Bolumo |
| Likonopo | ||||||
| Ctrl | Mofuta oa Msg | CC | Boitsebiso 1 | Boitsebiso 2 | Chan | Param |
| B1 | MIDI CC (Toggle) | 0 | 127 | 0 | Lefatšeng ka bophara | Banka ea MSB |
| B2 | MIDI CC (Toggle) | 2 | 127 | 0 | Lefatšeng ka bophara | Phefumoloho |
| B3 | MIDI CC (Toggle) | 3 | 127 | 0 | Lefatšeng ka bophara | Phetoho ea Taolo (e sa hlalosoang) |
| B4 | MIDI CC (Toggle) | 4 | 127 | 0 | Lefatšeng ka bophara | Leoto molaoli eo |
| B5 | MIDI CC (Toggle) | 6 | 127 | 0 | Lefatšeng ka bophara | Ho Kena Data MSB |
| B6 | MIDI CC (Toggle) | 8 | 127 | 0 | Lefatšeng ka bophara | Ho leka-lekanya |
| B7 | MIDI CC (Toggle) | 9 | 127 | 0 | Lefatšeng ka bophara | Phetoho ea Taolo (e sa hlalosoang) |
| B8 | MIDI CC (Toggle) | 11 | 127 | 0 | Lefatšeng ka bophara | Pontšo Molaoli |
| B9 | MIDI CC (Toggle) | 65 | 127 | 0 | Lefatšeng ka bophara | Portamento On / Off |
| Fader | ||||||
| Ctrl | Mofuta oa Msg | CC | Boitsebiso 1 | Boitsebiso 2 | Chan | Param |
| K1 | MIDI CC | 74 | 127 | 0 | Lefatšeng ka bophara | Khanya |
| K2 | MIDI CC | 71 | 127 | 0 | Lefatšeng ka bophara | Harmonic Content |
| K3 | MIDI CC | 5 | 127 | 0 | Lefatšeng ka bophara | Tekanyo ea Portamento |
| K4 | MIDI CC | 84 | 127 | 0 | Lefatšeng ka bophara | Botebo ba Portamento |
| K5 | MIDI CC | 78 | 127 | 0 | Lefatšeng ka bophara | Phetoho ea Taolo (Vibrato Delay) |
| K6 | MIDI CC | 76 | 127 | 0 | Lefatšeng ka bophara | Phetoho ea Taolo (Sekhahla sa Vibrato) |
| K7 | MIDI CC | 77 | 127 | 0 | Lefatšeng ka bophara | Phetoho ea Taolo (Botebo ba Vibrato) |
| K8 | MIDI CC | 10 | 127 | 0 | Lefatšeng ka bophara | Pan |
User Preset 2 GM Mixer 1-8
Hlokomela: B9 e abetsoe MIDI cc 65 ho li-presets tsohle tse reretsoeng ho ba teng bakeng sa ts'ebetso ea lefats'e.
| Faders | ||||||
| Ctrl | Mofuta oa Msg | CC | Boitsebiso 1 | Boitsebiso 2 | Chan | Param |
| F1 | MIDI CC | 7 | 127 | 0 | 1 | CH1 bophahamo ba modumo |
| F2 | MIDI CC | 7 | 127 | 0 | 2 | CH2 bophahamo ba modumo |
| F3 | MIDI CC | 7 | 127 | 0 | 3 | CH3 bophahamo ba modumo |
| F4 | MIDI CC | 7 | 127 | 0 | 4 | CH4 bophahamo ba modumo |
| F5 | MIDI CC | 7 | 127 | 0 | 5 | CH5 bophahamo ba modumo |
| F6 | MIDI CC | 7 | 127 | 0 | 6 | CH6 bophahamo ba modumo |
| F7 | MIDI CC | 7 | 127 | 0 | 7 | CH7 bophahamo ba modumo |
| F8 | MIDI CC | 7 | 127 | 0 | 8 | CH8 bophahamo ba modumo |
| F9 | MIDI CC | 7 | 127 | 0 | G | E khethiloe CH Volume |
| Likonopo | ||||||
| Ctrl | Mofuta oa Msg | CC | Boitsebiso 1 | Boitsebiso 2 | Chan | Param |
| B1 | MIDI CC (Toggle) | 12 | 127 | 0 | 1 | Semumu |
| B2 | MIDI CC (Toggle) | 12 | 127 | 0 | 2 | Semumu |
| B3 | MIDI CC (Toggle) | 12 | 127 | 0 | 3 | Semumu |
| B4 | MIDI CC (Toggle) | 12 | 127 | 0 | 4 | Semumu |
| B5 | MIDI CC (Toggle) | 12 | 127 | 0 | 5 | Semumu |
| B6 | MIDI CC (Toggle) | 12 | 127 | 0 | 6 | Semumu |
| B7 | MIDI CC (Toggle) | 12 | 127 | 0 | 7 | Semumu |
| B8 | MIDI CC (Toggle) | 12 | 127 | 0 | 8 | Semumu |
| B9 | MIDI CC (Toggle) | 65 | 127 | 0 | Lefatšeng ka bophara | Portamento |
| Fader | ||||||
| Ctrl | Mofuta oa Msg | CC | Boitsebiso 1 | Boitsebiso 2 | Chan | Param |
| K1 | MIDI CC | 10 | 127 | 0 | 1 | CH Pan |
| K2 | MIDI CC | 10 | 127 | 0 | 2 | CH Pan |
| K3 | MIDI CC | 10 | 127 | 0 | 3 | CH Pan |
| K4 | MIDI CC | 10 | 127 | 0 | 4 | CH Pan |
| K5 | MIDI CC | 10 | 127 | 0 | 5 | CH Pan |
| K6 | MIDI CC | 10 | 127 | 0 | 6 | CH Pan |
| K7 | MIDI CC | 10 | 127 | 0 | 7 | CH Pan |
| K8 | MIDI CC | 10 | 127 | 0 | 8 | CH Pan |
User Preset 3 GM Mixer 9-16
Hlokomela: B9 e abetsoe MIDI cc 65 ho li-presets tsohle tse reretsoeng ho ba teng bakeng sa ts'ebetso ea lefats'e
| Faders | ||||||
| Ctrl | Mofuta oa Msg | CC | Boitsebiso 1 | Boitsebiso 2 | Chan | Param |
| F1 | MIDI CC | 7 | 127 | 0 | 9 | CH1 bophahamo ba modumo |
| F2 | MIDI CC | 7 | 127 | 0 | 10 | CH2 bophahamo ba modumo |
| F3 | MIDI CC | 7 | 127 | 0 | 11 | CH3 bophahamo ba modumo |
| F4 | MIDI CC | 7 | 127 | 0 | 12 | CH4 bophahamo ba modumo |
| F5 | MIDI CC | 7 | 127 | 0 | 13 | CH5 bophahamo ba modumo |
| F6 | MIDI CC | 7 | 127 | 0 | 14 | CH6 bophahamo ba modumo |
| F7 | MIDI CC | 7 | 127 | 0 | 15 | CH7 bophahamo ba modumo |
| F8 | MIDI CC | 7 | 127 | 0 | 16 | CH8 bophahamo ba modumo |
| F9 | MIDI CC | 7 | 127 | 0 | G | E khethiloe CH Volume |
| Likonopo | ||||||
| Ctrl | Mofuta oa Msg | CC | Boitsebiso 1 | Boitsebiso 2 | Chan | Param |
| B1 | MIDI CC (Toggle) | 12 | 127 | 0 | 9 | Semumu |
| B2 | MIDI CC (Toggle) | 12 | 127 | 0 | 10 | Semumu |
| B3 | MIDI CC (Toggle) | 12 | 127 | 0 | 11 | Semumu |
| B4 | MIDI CC (Toggle) | 12 | 127 | 0 | 12 | Semumu |
| B5 | MIDI CC (Toggle) | 12 | 127 | 0 | 13 | Semumu |
| B6 | MIDI CC (Toggle) | 12 | 127 | 0 | 14 | Semumu |
| B7 | MIDI CC (Toggle) | 12 | 127 | 0 | 15 | Semumu |
| B8 | MIDI CC (Toggle) | 12 | 127 | 0 | 16 | Semumu |
| B9 | MIDI CC (Toggle) | 65 | 127 | 0 | Lefatšeng ka bophara | Portamento |
| Fader | ||||||
| Ctrl | Mofuta oa Msg | CC | Boitsebiso 1 | Boitsebiso 2 | Chan | Param |
| K1 | MIDI CC | 10 | 127 | 0 | 9 | CH Pan |
| K2 | MIDI CC | 10 | 127 | 0 | 10 | CH Pan |
| K3 | MIDI CC | 10 | 127 | 0 | 11 | CH Pan |
| K4 | MIDI CC | 10 | 127 | 0 | 12 | CH Pan |
| K5 | MIDI CC | 10 | 127 | 0 | 13 | CH Pan |
| K6 | MIDI CC | 10 | 127 | 0 | 14 | CH Pan |
| K7 | MIDI CC | 10 | 127 | 0 | 15 | CH Pan |
| K8 | MIDI CC | 10 | 127 | 0 | 16 | CH Pan |
Seta esale pele sa mosebelisi 4 "Ithute Setsoalle" 1
Hlokomela: B9 e abetsoe MIDI cc 65 ho li-presets tsohle tse reretsoeng ho ba teng bakeng sa ts'ebetso ea lefats'e.
| Faders | |||||
| Ctrl | Mofuta oa Msg | CC | Boitsebiso 1 | Boitsebiso 2 | Chan |
| F1 | MIDI CC | 80 | 127 | 0 | Lefatšeng ka bophara |
| F2 | MIDI CC | 81 | 127 | 0 | Lefatšeng ka bophara |
| F3 | MIDI CC | 82 | 127 | 0 | Lefatšeng ka bophara |
| F4 | MIDI CC | 83 | 127 | 0 | Lefatšeng ka bophara |
| F5 | MIDI CC | 85 | 127 | 0 | Lefatšeng ka bophara |
| F6 | MIDI CC | 86 | 127 | 0 | Lefatšeng ka bophara |
| F7 | MIDI CC | 87 | 127 | 0 | Lefatšeng ka bophara |
| F8 | MIDI CC | 88 | 127 | 0 | Lefatšeng ka bophara |
| F9 | MIDI CC | 3 | 127 | 0 | Lefatšeng ka bophara |
| Likonopo | |||||
| Ctrl | Mofuta oa Msg | CC | Boitsebiso 1 | Boitsebiso 2 | Chan |
| B1 | MIDI CC (Toggle) | 66 | 127 | 0 | Lefatšeng ka bophara |
| B2 | MIDI CC (Toggle) | 67 | 127 | 0 | Lefatšeng ka bophara |
| B3 | MIDI CC (Toggle) | 68 | 127 | 0 | Lefatšeng ka bophara |
| B4 | MIDI CC (Toggle) | 69 | 127 | 0 | Lefatšeng ka bophara |
| B5 | MIDI CC (Toggle) | 98 | 127 | 0 | Lefatšeng ka bophara |
| B6 | MIDI CC (Toggle) | 99 | 127 | 0 | Lefatšeng ka bophara |
| B7 | MIDI CC (Toggle) | 100 | 127 | 0 | Lefatšeng ka bophara |
| B8 | MIDI CC (Toggle) | 101 | 127 | 0 | Lefatšeng ka bophara |
| B9 | MIDI CC (Toggle) | 65 | 127 | 0 | Lefatšeng ka bophara |
| Fader | |||||
| Ctrl | Mofuta oa Msg | CC | Boitsebiso 1 | Boitsebiso 2 | Chan |
| K1 | MIDI CC | 89 | 127 | 0 | Lefatšeng ka bophara |
| K2 | MIDI CC | 90 | 127 | 0 | Lefatšeng ka bophara |
| K3 | MIDI CC | 96 | 127 | 0 | Lefatšeng ka bophara |
| K4 | MIDI CC | 97 | 127 | 0 | Lefatšeng ka bophara |
| K5 | MIDI CC | 116 | 127 | 0 | Lefatšeng ka bophara |
| K6 | MIDI CC | 117 | 127 | 0 | Lefatšeng ka bophara |
| K7 | MIDI CC | 118 | 127 | 0 | Lefatšeng ka bophara |
| K8 | MIDI CC | 119 | 127 | 0 | Lefatšeng ka bophara |
Seta esale pele sa mosebelisi 5 "Ithute Setsoalle" 2
| Faders | |||||
| Ctrl | Mofuta oa Msg | CC | Boitsebiso 1 | Boitsebiso 2 | Chan |
| F1 | MIDI CC | 80 | 127 | 0 | Lefatšeng ka bophara |
| F2 | MIDI CC | 81 | 127 | 0 | Lefatšeng ka bophara |
| F3 | MIDI CC | 82 | 127 | 0 | Lefatšeng ka bophara |
| F4 | MIDI CC | 83 | 127 | 0 | Lefatšeng ka bophara |
| F5 | MIDI CC | 85 | 127 | 0 | Lefatšeng ka bophara |
| F6 | MIDI CC | 86 | 127 | 0 | Lefatšeng ka bophara |
| F7 | MIDI CC | 87 | 127 | 0 | Lefatšeng ka bophara |
| F8 | MIDI CC | 88 | 127 | 0 | Lefatšeng ka bophara |
| F9 | MIDI CC | 3 | 127 | 0 | Lefatšeng ka bophara |
| Likonopo | |||||
| Ctrl | Mofuta oa Msg | CC | Boitsebiso 1 | Boitsebiso 2 | Chan |
| B1 | MIDI CC (Trig) | 66 | 127 | 0 | Lefatšeng ka bophara |
| B2 | MIDI CC (Trig) | 67 | 127 | 0 | Lefatšeng ka bophara |
| B3 | MIDI CC (Trig) | 68 | 127 | 0 | Lefatšeng ka bophara |
| B4 | MIDI CC (Trig) | 69 | 127 | 0 | Lefatšeng ka bophara |
| B5 | MIDI CC (Trig) | 98 | 127 | 0 | Lefatšeng ka bophara |
| B6 | MIDI CC (Trig) | 99 | 127 | 0 | Lefatšeng ka bophara |
| B7 | MIDI CC (Trig) | 100 | 127 | 0 | Lefatšeng ka bophara |
| B8 | MIDI CC (Trig) | 101 | 127 | 0 | Lefatšeng ka bophara |
| B9 | MIDI CC (Trig) | 65 | 127 | 0 | Lefatšeng ka bophara |
| Fader | |||||
| Ctrl | Mofuta oa Msg | CC | Boitsebiso 1 | Boitsebiso 2 | Chan |
| K1 | MIDI CC | 89 | 127 | 0 | Lefatšeng ka bophara |
| K2 | MIDI CC | 90 | 127 | 0 | Lefatšeng ka bophara |
| K3 | MIDI CC | 96 | 127 | 0 | Lefatšeng ka bophara |
| K4 | MIDI CC | 97 | 127 | 0 | Lefatšeng ka bophara |
| K5 | MIDI CC | 116 | 127 | 0 | Lefatšeng ka bophara |
| K6 | MIDI CC | 117 | 127 | 0 | Lefatšeng ka bophara |
| K7 | MIDI CC | 118 | 127 | 0 | Lefatšeng ka bophara |
| K8 | MIDI CC | 119 | 127 | 0 | Lefatšeng ka bophara |
Fektheri Khutlisa
Haeba o hloka ho khutlisetsa li-setting tsa feme bakeng sa mohlalaample haeba ka phoso u khonne ho fetola likabelo tse hlokahalang bakeng sa kopanyo ea DAW files, mona ke mokhoa oa ho etsa joalo.
- Etsa bonnete ba hore Impact LX+ ea hau e tingoe
- Tobetsa [Octave up]+[Octave down]
- Fetolela Impact LX+ ea hau
E entsoe ke Nektar Technology, Inc Made in China
Khoasolla PDF: Nektar LX49+ Impact Controller keyboard Manual