Mytrix MTNSPC-01 Wireless Controller bakeng sa NS

3.5mm jack (e sebetsa feela ha molaoli a hokela khomphutha ka thapo)

Tlhaloso

• Keletso Voltage: 5V, 300mA
• Sebetsa Voltage: 3.7v
• Bokhoni ba Betri: 300mAh
• Boholo ba lihlahisoa: 130 * 55 * 102mm
• Boima ba 'mele: 155+5g
• lintho tse bonahalang: ABS

Sephutheloana se kenyeletsa

• 1x Molaoli
• 1× USB Type-C Cable ea ho tjhaja
• 1x Buka ea Mosebelisi

Khokahano e se nang Waele & Mosebetsi oa Tsoha

Lemoha ka kopo: Ka kopo etsa bonnete ba hore mofuta oa AIRPLANE oa console o tingoe pele o qala ho o sebelisa.

Ho Kopanya Lekhetlo la Pele

1. Ho tsoa ho HOME menu ea console, khetha Controllers, ebe Fetola Grip/Order.
2. Tobetsa 'me u tšoare konopo ea "SYNC" ka holimo ho molaoli bonyane metsotsoana e mehlano ho kenya matla ho molaoli ho fihlela li-LED tsohle tse 4 li khanya. Hang ha li pentiloe, li-LED tsohle tse 4 li tla lula li khantšitsoe, 'me molaoli o tla lula a le teng
   e hlahang skrineng.

Tsoha 'me u kopane hape
Hang ha molaoli a kopantsoe le console:

• Haeba console e le ka mokhoa oa SLEEP, konopo ea "HOME" ea molaoli e ka tsosa molaoli le console.
• Haeba console e ntse e le teng, likonopo tsohle li ka tsosa molaoli, molaoli o tla boela a hokahane le console. Haeba o sa khone ho hokahanya, ka kopo latela mehato e meraro
• Koala mokhoa oa AIRPLANE ho khomphutha
• Tlosa tlhahisoleseding ea molaoli ho NS console (System Setting> Controllers and Sensors> Disconnect Controllers)
• Latela mehato ea Pele ea ho Kopanya

Controller Auto Boroko

• Khokahanong e se nang mohala, tobetsa 'me u tšoare konopo ea HOME metsotsoana e 3, molaoli o tla khaoloa ebe o fetoha mokhoa oa ho robala.
• Haeba ho se na konopo e hatisitsoeng nakong ea metsotso e 5, molaoli o tla robala ka bohona.
• Molaoli oa robala ha molaoli a le mokhoeng oa SLEEP.

Khokahano e Wiring

1. Bulela "Pro Controller Wired Communication" ka har'a khomphutha: Litlhophiso tsa Sistimi> Balaoli le li-Sensors> Pro Controller Wirec
2. Puisano > Buletswe

Lemoha ka kopo: "Pro Controller Wired Communication" e tlameha ho buloa PELE ho hokela molaoli le Dock ka thapo.

Khokahano e Wiring

1. Bulela "Pro Controller Wired Communication" ka har'a khomphutha: Litlhophiso tsa Sistimi> Balaoli le li-Sensors> Puisano ea Wirec ea Pro Controller> Buletsoe.
   Lemoha ka kopo: "Pro Controller Wired Communication" e tlameha ho buloa PELE ho hokela molaoli le Dock ka thapo.
2. Beha Switch console ho Dock bakeng sa mokhoa oa TV. Hokela Switch Dock le molaoli ka kotloloho ka thapo ea Mofuta oa C ho ea ho A.
3. Tobetsa konopo ea HOME > Controllers > Fetola Grip/Order. Letšoao la molaoli le nang le "USB" le hlahang skrineng le bontša hore khokahanyo ea mohala e atlehile.

Mosebetsi oa Audio
Molaoli o na le boema-kepe ba molumo oa 3.5mm mme o tšehetsa li-headset kapa li-microphone tse nang le terata tse 3.5mm.
Lemoha ka kopo: Mosebetsi oa molumo o tla sebetsa FEELA Mokhoeng oa Khokahano ea Wired ka Switch console. E TLA SE sebetse tlas'a khokahanyo ea waelese kapa ha molaoli a hokeletsoe PC.

Lemoha ka kopo
"Pro Controller Wired Communication" e tlameha ho buloa PELE ho hokela molaoli le Dock ka thapo. Litlhophiso tsa Sistimi> Balaoli le li-Sensors> Pro Controller

Puisano ya Wired > Buletswe
Seta Switch console ho Dock bakeng sa mokhoa oa TV.3 Hokela Switch Dock le molaoli ka thapo ea USB Letšoao le nang le "USB" le bonts'itsoeng le bontša hore khokahanyo ea mohala e atlehile. Hokela jeke ea molumo ea 3.5mm boema-kepeng ba molumo botlaaseng ba molaoli.

Turbo le Auto-fire
Likonopo tse teng ho beha Mosebetsi oa Turbo:
Konopo ea A/B/X/Y/LIZL/R/ZR

Turbo le Auto-fire
Likonopo tse teng ho beha Mosebetsi oa Turbo:
Konopo ea A/B/X/Y/LIZL/R/ZR

Theha mosebetsi oa Turbo

1. Manual Turbo Function: Tobetsa 'me u tšoare konopo ea Turbo, ebe u tobetsa konopo efe kapa efe ea ts'ebetso HANG ho bulela "Manual Turbo Function".
2. Auto Turbo Function: Pheta mohato oa pele o kaholimo ho fetohela ho "Auto Turbo Function".
3. Tlosa Mosebetsi oa Turbo: Pheta mohato oa pele ka mor'a hore "Auto Turbo Function" e behoe.

Koala mesebetsi eohle ea turbo bakeng sa likonopo tsohle
Tobetsa 'me u tšoare konopo ea Turbo bakeng sa metsotsoana e 3, ebe u tobetsa konopo ea ho tlosa '- ho tima mesebetsi ea turbo ea likonopo tsohle.

Ho na le Methati e meraro bakeng sa lebelo la Turbo

• Butle: 5 Shots / s, matšoao a LED a lumellanang a tla khanya ka lebelo le liehang.
• Bohareng: 12 shots / s, matšoao a LED a lumellanang a tla benya ka lebelo le bohareng. (Boemo ba kamehla)
• Ka potlako: 20 shots / s, matšoao a LED a lumellanang a tla benya ka lebelo le potlakileng.

Fetola Maemo a Lebelo la Turbo
Tobetsa 'me u tšoare konopo ea Turbo, 'me u tobetse konopo e nepahetseng ea thabo ho theola sehlopha se le seng sa lebelo la turbo; hula thipa e nepahetseng ea thabo ho eketsa sehlopha se le seng sa lebelo la turbo. O ka Lekola le ho Lekola Litlhophiso tsa Turbo ho Console: Litlhophiso> Balaoli le Li-sensor> Lisebelisoa tsa Kenyelletso> Teko

Likonopo tsa Laola
Fetola Matla a Vibration Ho na le Maemo a Mane a Matla a Vibration: Ha ho letho, le fokolang, le bohareng, le matla.

Macro Definition Function
Ho na le likonopo tse peli tse nolofalitsoeng ke macro "ML/MR" ka morao ho molaoli, le konopo ea "T" e hlalosang tlhaloso e kholo. Likonopo "ML/MR" li ka hlophisoa hore e be likonopo tsa ts'ebetso kapa tatellano ea likonopo ka ho latellana.

Likonopo tsa ML/MR li ka hlophisoa hore li
Likonopo tsa A/BIX/Y/LIZL/RIZR/holimo/tlase/ka ho le letšehali/le letona

Kenya Macro Definition Mode ebe u Seta likonopo (li)

1. Tobetsa konopo ea "T" ka morao ho molaoli ka metsotsoana ea 3, 'me leseli "LED2-3" le tla khanya butle.
2. Tobetsa konopo ea "ML" kapa "MR", 'me leseli la "LED2" le tla bonesa butle, Mookameli o se a loketse ho rekota boemo ba macro.
3. Tobetsa likonopo tsa ts'ebetso tse hlokang ho hlophisoa ka ho latellana, molaoli o tla rekota konopo le nako ea nako ea konopo ka 'ngoe e tobetse.
4. Tobetsa konopo ea "T" ho boloka, lebone la "LED1" le tla lula le khanya. Mosebetsi oa tlhaloso e kholo o tla tšoaroa ka hlooho.
5. Ha molaoli a hokahana hape le khomphutha, o tla sebelisa sebopeho sa ho qetela sa tlhaloso ea macro.

Hlakola Litlhophiso tsa Tlhaloso ea Macro
Tobetsa 'me u tšoare konopo ea "T" metsotsoana e 5 ho fihlela mabone a "LED1-4" a khanya, litlhophiso tsohle tsa hona joale tsa macro definition li tla hlakoloa.

ExampLe:

• Tšoara konopo ea "T" metsotsoana e 3 ho fihlela lebone la "LED2-LED3" le bonesa butle.
• Tobetsa konopo ea "ML", lebone la "LED2" le tla khanya butle, ebe molaoli o se a loketse ho rekota.
• Tobetsa konopo ea "B", kamora motsotsoana o le mong tobetsa "A", kamora metsotsoana e 1 Tobetsa "X", ebe o tobetsa "T" ho qeta ho seta le ho boloka.
• Konopo "ML" joale e se e hlophisitsoe ho etsa "B (kamora 1s) → A (kamora 3s) → X
• O ka Lekola le ho Lekola Litlhophiso tsa "ML/MR" ho Console: Litlhophiso> Balaoli le li-sensor> Lisebelisoa tsa ho Kena liteko> Teko.

Likonopo tsa Laola
Khokahano ea Wired ho Windows PC

PC X-INPUT

• Hokela molaoli komporong ea sistimi ea Windows ka thapo ea USB, e tla tsejoa ka bo eona e le "X-INPUT" mode.
• Li-LED tsa pele le tsa bone li tla ba le leseli le tsitsitseng.
• Lemoha ka kopo: Mokhoeng oa X-INPUT, konopo "A" e fetoha "B", "B" e fetoha "A", "X" e fetoha "Y", 'me "Y" e fetoha "X". STEAM
• Tobetsa konopo ea "joystick" e nepahetseng 'me u hokele molaoli komporong ka thapo ea USB.
• E tla amoheloa e le mokhoa oa STEAM "Pro Controller" mme e ka sebelisoa bakeng sa lipapali tse tšehetsoeng.

Mesebetsi Papiso

Fetola Mekhoa ea Leseli ea Litsebe
Mekhoa e meraro ea Matla a Leseli a Mokhoa oa ho phefumoloha oa Litsebe → khanya → khanya e tima

Fetola Mekhoa ea Leseli
Ka mor'a hore molaoli a kopane le console, tobetsa likonopo tsa "L" le "R" ka metsotsoana ea 5 ho fetola mokhoa oa ho khantša.

Litaelo tsa ho tjhaja

• Selaoli se ka lefisoa ka ho sebelisa Switch charger, Switch Dock, adaptara ea motlakase ea 5V 2A, kapa lisebelisoa tsa motlakase tsa USB ka thapo ea Mofuta oa C ho isa A.
• Haeba molaoli o hokahane le khomphutha ha a ntse a tjhaja, mabone a LED a lebone le tsamaisanang le molaoli a tla benya. Mabone a LED) a tla lula a khantšitsoe haeba molaoli a lefisitsoe ka botlalo.
• Haeba molaoli a sa kopane le console ha a ntse a tjhaja, mabone a 4 a LED a tla khanya. Mabone a LED a tla tima ha molaoli a tjhajitsoe ka botlalo.
• Ha betri e le tlase, lebone le tsamaisanang le LED le tla benya; molaoli o tla tima 'me o hloka ho tjhaja ha betri e felile.

Lekanya Lithupa tsa Taolo
Tobetsa konopo ea HOME > Litlhophiso tsa Sistimi > Lilaoli le lisensara > Calibrate Control Sticks > Tobetsa thupa eo u batlang ho e lekanya Latela litaelo tse skrineng ho netefatsa tšebetso ea molaoli.

Lekanya Litaolo tsa Motion
Tobetsa konopo ea HOME > Litlhophiso tsa Sistimi > Li- Controllers le Li-Sensors > Lekanya Litaolo tsa Motion > Lekanya Li- Controllers > Beha molaoli sefofaneng se tšekaletseng 'me u tšoare "-" kapa "+" ho molaoli oo u batlang ho o lekanya.

Lemoha ka kopo
Ha u sebelisa molaoli oa mohala khetlo la pele, ho khothaletsoa hore li-Control Sticks le Motion Controls li hlahlojoe pele li sebelisoa. Haeba tlhahlobo e hloleha, ka kopo, tobetsa konopo ea "Y" ho khutlisetsa litlhophiso ebe o tobetsa konopo ea "X" ho pheta mehato ea ho lekanya. Tlosa selaoli hang ha calibration e felile, ebe u qala selaoli le khomphutha bocha.

Tiisetso

Sehlahisoa se tla le waranti e lekantsoeng ea selemo se le seng. Sepheo sa rona ke ho finyella khotsofalo e feletseng ea bareki, re tla etsa sohle se matleng a rona ho utloisisa litlhoko tsa bareki ba rona le ho finyella litlhoko kamehla. Haeba u na le lipotso, ka kopo u se ke oa tsilatsila ho ikopanya le rona ka cs@mytrixtech.com. Re tla thabela ho u thusa ho feta.

Lintlha tsa Khampani
Khampani: Mytrix Technology LLC
Tšebeletso ea Bareki Mohala: +1 978-496-8821
Email Service Customer: cs@mytrixtech.com
Web: www.mytrixtech.com
Aterese: 13 Garabedian Dr Unit C, Salem NH 03079

Litokomane / Lisebelisoa

Mytrix MTNSPC-01 Wireless Controller bakeng sa NS [pdf] Bukana ea Mosebelisi MTNSPC-01 Wireless Controller for NS, MTNSPC-01, Wireless Controller bakeng sa NS, Controller for NS

Litšupiso

• Bukana ea Mosebelisi