mXion PWD 2-Channel Function Decoder
Lintlha tse akaretsang
Re khothaletsa ho ithuta bukana ena ka botlalo pele o kenya le ho sebelisa sesebelisoa sa hau se secha.
Beha sedekhouta sebakeng se sirelelitsoeng. Sehlopha ha sea lokela ho pepesehela mongobo.
HLOKOMELA: Li-funktions tse ling li fumaneha feela ka firmware ea morao-rao. Ka kopo etsa bonnete ba hore sesebelisoa sa hau se na le firmware ea morao-rao.
Kakaretso ea Funktions
Ts'ebetso ea DC/AC/DCC
Analog & digital
Mojule oa NMRA-DCC o lumellanang Mojule o monyane haholo
Buffer aha-in bakeng sa 3 min.
- LGB® DB Car (3x31x)
- LGB® RhB Car EW I, II, III, IV (3x67x)
- LGB® RhB Dinercar (3x68x)
- LGB® RhB Controlcar (3x90x)
- LGB® RhB Baggagecar (3x69x)
- LGB® RhB Panoramacar (3x66x)
- LGB® RhB Salon/Pullmancar (3x65x)
- LGB® RhB Gourmino (3x52x)
- LGB® US Streamliner (3x57x le 3x59x) Liphetho tse matlafalitsoeng tse 2 tsa ts'ebetso e kopantsoeng le jenereithara ea 5V.
Jenereithara e sa reroang (mohlala, lebone la ntloana)
Maemo (pele, morao, joalo-joalo ...)
Mesebetsi e mengata e khethehileng le ea nako e fumanehang Liphetho tsa mosebetsi li ka fifala
Seta botjha tshebetso bakeng sa boleng bohle ba CV
Ho etsa 'mapa o bonolo oa 14, 28, 128 mehato ea lebelo (ka ho iketsa) Likhetho tse ngata tsa mananeo
(Bitwise, CV, POM)
Ha e hloke mojaro oa lenaneo E ka laoloa ka liaterese tsa switjha (V. 1.1)
Sebaka sa phepelo
- Bukana
- mXion PWD
Hokela
Kenya sesebelisoa sa hau ho ipapisitse le litšoantšo tse hokelang bukeng ena. Sesebelisoa se sirelelitsoe khahlanong le lifupi le meroalo e feteletseng. Leha ho le joalo, haeba ho na le phoso ea khokahano, mohlala, ka nako e khuts'oane, ts'ireletso ena e ke ke ea sebetsa mme sesebelisoa se tla senyeha kamora moo. Etsa bonnete ba hore ha ho na potoloho e khuts'oane e bakoang ke li-screws kapa tšepe e ntseng e hola.
HLOKOMELA: Ka kopo hlokomela litlhophiso tsa mantlha tsa CV nakong ea ho tsamaisoa.
Lihokelo
Phetoho e sebetsa ka analog le digital. Hokela bareki ho A1 le A2 (bona setšoantšo). A1 e loketse mabone a siling, A2 bakeng sa ntloana kapa tafole ea lamps. Taolo e sa reroang hammoho le inversion hammoho le ts'ebetso e tsoelang pele e ka khoneha, hammoho le liphello.
Tlhaloso ea Sehlahisoa
PWD ea mXion ke 2 ch. sesebelisoa sa decoder.
E loketse likoloi tsohle tse khantšitsoeng fekthering tse tsoang LGB® tse loketseng 'me lisebelisoa tsa elektroniki tse teng li ka nka sebaka sa 1:1. Lisebelisoa tsa elektronike li fatše (bakeng sa likoloi tsa RhB) kapa ka ntloaneng (bakeng sa likoloi tsa DB tse kang IC, D-Train). PWD e boetse e na le switch e le puffer e kholo, kahoo ts'ebetso e se nang mathata e ka khoneha.
E bakoa ke ts'ebetso e phahameng le ts'ebetso. Ka lebaka la litekanyo tse nyane, mojule (hape o ngata) ka li-locomotives, likoloi, kapa meaho e tla. Ka tlhahiso ea eona e phahameng ea matla ho tloha ho 1 Amps ka kanale e le 'ngoe e loketse ho lora le ho feta. Ho feta moo, module e ts'ehetsa letoto la litlamorao tsa mabone le li-switching tse hlophisitsoeng 'me li ka etsoa ka bolokolohi.
E loketse hore likoloi tsa baeti li lumellane le tsena ho khantša le ho ba le lisebelisoa tse bobebe. Likanale tse peli li ka khona, mohlalaample, liphaposi tse khantšitsoeng ka thoko. Ho koala terene lamps. Ka mokhoa oa analog, liphetho ka bobeli li sebetsa ka botlalo hape li ka sebelisoa. Ho feta moo, liphetho ka bobeli li ka fokotsoa.
Setšoantšo se latelang se bontša PWD e kentsoeng koloing ea RhB, e le hore ea khale, e nang le liphoso e nkeloe sebaka.
Khokahano e ka ba screwed kapa soldered.
Senotlolo sa mananeo
Ho thibela mananeo a kotsi ho thibela CV 15/16 senotlolo sa lenaneo le le leng. Ha feela CV 15 = CV 16 e le lenaneo le ka khonehang. Ho fetola CV 16 ho fetoha ka bo eona le CV 15.
Ka CV 7 = 16 senotlolo sa lenaneo se ka seta bocha.
BOHLOKOA BOHLOKOA CV 15/16 = 245
Dikgetho tsa mananeo
Decoder ena e tšehetsa mefuta e latelang ea mananeo: bitwise, POM le CV bala & ngola le register-mode.
Ha ho na ho ba le mojaro o eketsehileng bakeng sa ho etsa mananeo.
Ho POM (programming on maintrack) senotlolo sa mananeo se boetse se tšehetsoa. Dekhouda e ka boela ea ba pina e kholo e hlophisitsoeng ntle le hore dekhouda e 'ngoe e susumetsoe. Kahoo, ha ho etsoa lenaneo, decoder e ke ke ea tlosoa.
HLOKOMELA: Ho sebelisa POM ntle le li-decoder tse ling ho tlameha ho ama setsi sa hau sa dijithale POM ho liaterese tse ikhethileng tsa li-decoder
Ho hlophisa litekanyetso tsa binary
Li-CV tse ling (mohlala 29) li na le seo ho thoeng ke binary values. Ho bolela hore li-setting tse 'maloa ka boleng. Mosebetsi o mong le o mong o na le boemo bo itseng le boleng. Bakeng sa
ho hlophisa CV e joalo ho tlameha ho ba le bohlokoa bohle bo ka eketsoang. Mosebetsi o nang le bokooa o lula o na le boleng ba 0.
EXAMPLE: U batla litepisi tse 28 tsa koloi le aterese e telele ea loco. Ho etsa sena, o tlameha ho beha boleng ho CV 29 2 + 32 = 34 e hlophisitsoeng.
Taolo ea buffer
Buffer e kholo bakeng sa metsotso e 'maloa e se e kopantsoe mme e kopantsoe ke ea hona joale ke 500 mA, mojaro oa hona joale ho fihla ho 2A.
Lenaneo la aterese ea sebaka
Li-locomotives ho fihlela ho 127 li hlophisitsoe ka ho toba ho CV 1. Bakeng sa sena, o hloka CV 29 Bit 5 "off" (e tla beha ka ho iketsa). Haeba ho sebelisoa liaterese tse khōloanyane, CV 29 – Bit 5 e tlameha ho ba "ho" (ka tsela e iketsang haeba u fetola CV 17/18). Hona joale aterese e ho CV 17 le CV 18 e bolokiloe. Joale aterese e tšoana le e latelang (mohlala, aterese ea loco 3000): 3000 / 256 = 11,72; CV 17 ke 192 + 11 = 203. 3000 - (11 x 256) = 184; CV 18 ke 184.
Seta botjha ditshebetso
Decoder e ka hlophisoa bocha ka CV 7. Libaka tse fapaneng li ka sebelisoa molemong ona. Ngola ka lintlha tse latelang:
- 11 (mesebetsi ea mantlha)
- 16 (senotlolo sa mananeo CV 15/16)
- 33 (liphetho tsa ts'ebetso)
Likarolo tsa tlhahiso ea mosebetsi
| Funktion | A1 | A2 | Nako ea nako |
| Bula/E tima | X | X | |
| E notletsoe | X | X | |
| Ka ho sa Feleng | X | X | |
| Pele feela | |||
| Ka morao feela | |||
| Ho ema feela | |||
| Ho khanna feela | |||
| Sym ea nako. kganya | X | X | X |
| Asym ea nako. kgutshoanyane | X | X | X |
| Asym ea nako. telele | X | X | X |
| Monoflop | X | X | X |
| Fetola tieho | X | X | X |
| Lebokose la mollo | X | X | |
| TV ea panya | X | X | |
| Flash ea lifoto | X | X | X |
| Phetroleum e ntse e qepha | X | X | |
| Tube ea lipalesa | X | X | |
| phofo e senyehileng. tube | X | X | |
| Leseli la strobe la US | X | X | X |
| US strobe habeli | X | X | X |
| Ho fapanyetsana ka bobeli | X | X | X |
| Fade in/out | |||
| Motlakase. kgutlela morao | X | ||
| Ho fifala | X | X |
| CV | Tlhaloso | S | A | Range | Hlokomela | ||
| 1 | Aterese ea Loco | 3 | 1 - 127 | haeba CV 29 Bit 5 = 0 (seta bocha ka bohona) | |||
| 7 | Mofuta oa software | – | – | bala feela (10 = 1.0) | |||
| 7 | Setlankane tsosolosa mesebetsi | ||||||
|
Mekhahlelo e 3 e teng |
11
16 33 |
litlhophiso tsa motheo (CV 1,11-13,17-19,29-119) senotlolo sa mananeo (CV 15/16)
liphetho tsa ts'ebetso (CV 120-129) |
|||||
| 8 | ID ea moetsi | 160 | – | bala feela | |||
| 7+8 | Ngodisa mananeo mokgoa | ||||||
|
Reg8 = CV-Aterese Reg7 = Boleng ba CV |
CV 7/8 ha e fetole boleng ba hae ba 'nete
CV 8 ngola pele ka cv-nomoro, ebe CV 7 ngola ka boleng kapa bala (mohlala: CV 49 e lokela ho ba le 3) è CV 8 = 49, CV 7 = 3 ho ngola |
||||||
| 11 | Analogue e felile | 30 | 30 - 255 | 1ms boleng bo bong le bo bong | |||
| 13 | Liphetho tsa ts'ebetso ka mokhoa oa analog (haeba boleng bo setiloe) |
3 |
0 - 3 |
eketsa litekanyetso mosebetsing o lakatsehang!
A1 = 1, A2 = 2 |
|||
| 15 | Senotlolo (senotlolo) | 245 | 0 - 255 | ho notlela feela fetola boleng bona | |||
| 16 | Senotlolo sa mananeo (notlolo) | 245 | 0 - 255 | liphetoho ho CV 16 li tla fetola CV 15 | |||
| 17 | Aterese e telele ea sebaka (holimo) | 128 | 128 -
10239 |
activ hafeela CV 29 Bit 5 = 1 (e behiloe ka boiketsetso ha e fetola CV 17/18) | |||
| 18 | Aterese e telele ea sebaka (tlase) | ||||||
| 19 | Aterese ea ho hula | 0 | 1 -
127/255 |
aterese ea sebaka sa marang-rang bakeng sa mekhoa e mengata
0 = deactive, +128 = invers |
|||
| 29 | NMRA tlhophiso | 6 | √ | bitwise mananeo | |||
| Bit | Boleng | TLOA (Boleng 0) | ON | ||||
| 1 | 2 | 14 mehato ea lebelo | 28/128 mehato ea lebelo | ||||
| 2 | 4 | ts'ebetso ea dijithale feela | ts'ebetso ea dijithale + analog | ||||
| 5 | 32 | aterese e khuts'oane ea sebaka (CV 1) | aterese e telele ea sebaka (CV 17/18) | ||||
| 7 | 128 | aterese ea sebaka | switjha aterese (ho tloha V. 1.1) | ||||
| 48 | Ho bala aterese
(V. 1.1) |
0 | S | 0/1 | 0 = Fetola aterese joalo ka tloaelo
1 = Fetola aterese joalo ka Roco, Fleischmann |
||
| 49 | mXion tlhophiso | 0 | √ | bitwise mananeo | |||
| Bit | Boleng | TLOA (Boleng 0) | ON | ||||
| 4 | 16 | A1 e tloaelehileng | A1 e nyamela kahare/ho tswa (ab. V. 1.4) | ||||
| 5 | 32 | A2 e tloaelehileng | A2 e nyamela kahare/ho tswa (ab. V. 1.4) | ||||
| 6 | 64 | A1 e tloaelehileng | Li-invers tsa A1 (ho tloha ho V. 1.1) | ||||
| 7 | 128 | A2 e tloaelehileng | Li-invers tsa A2 (ho tloha ho V. 1.1) | ||||
| 98 | Jenereithara e sa reroang | 0 | √ | 0 - 3 | Eketsa bakeng sa tshebetso, +1 = A1, +2 = A2 (V. 1.1) | ||
|
19 |
PWD |
||||||
| CV | Tlhaloso | S | A | Range | Hlokomela |
| 120 | Kabo ea taelo ea A1 | 1 | sheba sehlomathiso 1
(haeba CV 29 Bit 7 = 1, fetola aterese ho fihla ho 255 (ho tloha V. 1.1)) |
||
| 121 | Boleng ba ho fifala ha A1 | 255 | √ | sheba sehlomathiso 2 | |
| 122 | Boemo ba A1 | 0 | √ | sheba sehlomathiso 3 (ho tloha ho V. 1.1) | |
| 123 | Mosebetsi o khethehileng oa A1 | 0 | √ | sheba sehlomathiso 4 | |
| 124 | Nako ea A1 bakeng sa ts'ebetso e khethehileng | 5 | √ | 1 - 255 | motheo oa nako (0,1s / boleng) |
| 125 | Kabo ea taelo ea A2 | 2 | sheba sehlomathiso 1
(haeba CV 29 Bit 7 = 1, fetola aterese ho fihla ho 255 (ho tloha V. 1.1)) |
||
| 126 | Boleng ba ho fifala ha A2 | 255 | √ | sheba sehlomathiso 2 | |
| 127 | Boemo ba A2 | 0 | √ | sheba sehlomathiso 3 (ho tloha ho V. 1.1) | |
| 128 | Mosebetsi o khethehileng oa A2 | 0 | √ | sheba sehlomathiso 4 | |
| 129 | Nako ea A2 bakeng sa ts'ebetso e khethehileng | 5 | √ | 1 - 255 | motheo oa nako (0,1s / boleng) |
| AKELETSO 1 – Taelo kabo | ||
| Boleng | Kopo | Hlokomela |
| 0 – 28 | 0 = Fetola ka konopo e khanyang
1 – 28 = Fetola ka senotlolo sa F |
Ha feela CV 29 Bit 7 = 0 |
| +64 | sa feleng tima | |
| +128 | sa feleng ho | |
| KHOPELETSO 2 – Ho fifala boleng | ||
| Boleng | Kopo | Hlokomela |
| 0 – 255 | boleng bo fokolang | ka % (1 % e haufi le 0,2 V) |
| KHOPELETSO 3 – Boemo | ||
| Boleng | Kopo | Hlokomela |
| 0 | sa feleng (ts'ebetso e tloaelehileng) | |
| 1 | pele feela | |
| 2 | morao feela | |
| 3 | e emeng feela | |
| 4 | ho ema "pele" feela | |
| 5 | e emeng “morao” feela | |
| 6 | ho kganna feela | |
| 7 | ho khanna "pele" feela | |
| 8 | ho kganna "moratla" feela | |
| KHOPELETSO 4 – E khethehileng tshebetso | ||
| Boleng | Kopo | Hlokomela |
| 0 | ha ho na ts'ebetso e khethehileng (sehlahisoa se tloaelehileng) | |
| 1 | flash symetric | motheo oa nako (0,1s / boleng) |
| 2 | flash asymetric short ON (1:4) | Nako ea motheo (0,1s / Value) ke ea boleng bo bolelele |
| 3 | phatsimisa bolelele ba symetric HO BONA (4:1) | |
| 4 | Flash ea lifoto | motheo oa nako (0,25s / boleng) |
| 5 | monoflop (automatic switch off) | motheo oa nako (0,1s / boleng) |
| 6 | switjha e diehile | motheo oa nako (0,1s / boleng) |
| 7 | lebokose la mollo | |
| 8 | TV ea panya | |
| 9 | peteroleum e phatsimang | |
| 10 | tube ea phofo | |
| 11 | tube e sa sebetseng hantle | |
| 12 | kganya e fapanyetsanang ho ya ho tlhahiso e kopanetsweng | ka kopanelo A1 & A2 |
| 13 | Leseli la strobe la US | motheo oa nako (0,1s / boleng) |
| 14 | Leseli la US double strobe | motheo oa nako (0,1s / boleng) |
Lintlha tsa tekheniki
- Matla a matla: 7-27V DC / DCC 5-18V AC
- Hona joale: 5mA (ntle le mesebetsi)
- Boholo ba tšebetso hajoale:
- A1 1 Amps.
- A2 1 Amps.
- Boholo ba hajoale: 1 Amps.
- Sebaka sa mocheso: -20 ho isa ho 65°C
- Litekanyo L * B * H (cm): 2 * 1.5 * 0.5
HLOKOMELA: Haeba u ikemiselitse ho sebelisa sesebelisoa sena ka tlas'a serame, etsa bonnete ba hore se bolokiloe sebakeng se futhumetseng pele se sebetsa ho thibela ho hlahisoa ha metsi a condensed. Nakong ea ts'ebetso ho lekane ho thibela metsi a khutsitseng.
Warranty, Tšebeletso, Tšehetso
micron-dynamics e tiisa sehlahisoa sena khahlano le bofokoli ba thepa le moetso oa selemo se le seng ho tloha ho
letsatsi la pele la theko. Linaha tse ling li ka ba le maemo a fapaneng a tiisetso ea molao. Ho senyeha ho tloaelehileng,
liphetoho tsa bareki hammoho le tšebeliso e fosahetseng kapa ho kenya ha li koaheloe. Tšenyo ea karolo ea peripheral ha e koahetsoe ke tiisetso ena. Litlaleho tse sebetsang tsa mangolo a tumello li tla fanoa ntle le tefiso nakong ea tiisetso. Bakeng sa tšebeletso ea tiisetso ka kopo khutlisetsa sehlahisoa ho moetsi. Litefiso tsa ho khutlisa ha li lefelloe ke
matla a micron. Ka kopo, kenyelletsa bopaki ba theko ea hau le thepa e khutlisitsoeng. Ka kopo sheba rona websaete bakeng sa libukana tsa morao-rao, tlhahisoleseding ea sehlahisoa, litokomane le lisebelisoa tsa software. Lintlafatso tsa software tseo u ka li etsang ka sesebelisoa sa rona sa ntlafatso kapa u ka re romella
sehlahisoa, re u nchafatsa mahala.
Liphoso le liphetoho li kantle.
Mohala oa mohala
Bakeng sa tšehetso ea tekheniki le schematics bakeng sa kopo exampLes contact:
- matla a micron
- info@micron-dynamics.de
- service@micron-dynamics.de
Litokomane / Lisebelisoa
 |
mXion PWD 2-Channel Function Decoder [pdf] Bukana ea Mosebelisi PWD 2-Channel Function Decoder, PWD, 2-Channel Function Decoder, Function Decoder, Decoder |
