multiLaneinc AT93000 High Speed ​​I/O HSIO Test System

MOEKETSI MOSEBETSI

MODEL: AT93000

The AT93000 System is a high-speed I/O (HSIO) Test System designed for efficient testing of electronic components. It is equipped with advanced features for accurate and reliable testing.

Tsamaiso e Fetilengview

Sistimi ea tlhahlobo ea IO HSIO

 

Sistimi ea tlhahlobo ea IO HSIO

Litsebiso

Kopitsa ka ho le letona © MultiLane Inc. Litokelo tsohle li sirelelitsoe. Lihlahisoa tse nang le laesense ke tsa MultiLane Inc. kapa bafani ba eona 'me li sirelelitsoe ke melao ea litokelo tsa litokelo tsa litokelo tsa litokelo tsa molao tsa United States le litumellano tsa tumellano ea machaba.

Tšebeliso, phetisetso, kapa phatlalatso ea Mmuso e laolwa ke dithibelo jwaloka ha ho hlalositswe serapeng sa (c)(1)(ii) sa Ditokelo tsa Tekheniki Data le Computer Software clause ho DFARS 252.227-7013, kapa ditemana (c)( 1) a d (2) ea Khomphutha ea Khomphutha ea Khomphutha - Karoloana ea Litokelo tse Thibeloeng ho FAR 52.227-19, joalo ka ha e sebetsa.
Lihlahisoa tsa MultiLane Inc. li koahetsoe ke litente tsa US le tsa kantle ho naha, tse fanoeng le tse ntseng li emetse. Tlhahisoleseding e hlahang khatisong ena e nkela sebaka seo linthong tsohle tse hatisitsoeng ka nako e fetileng. Litlhaloso le litokelo tsa phetoho ea theko li boetse li fanoe.

Kakaretso ea Tšireletseho

Review the following safety precautions to avoid injury an d prevent damage to this product or any products connected to it. To avoid potential hazards, use this p roduct only as specified.
Only qualified personnel should perform service p rocedures.

While using this product, you may need to access other p arts of the system. Read the General Safety Summary in o ther system manuals for warnings and cautions related to o perating the system.

Ho Qoba Mollo kapa Kotsi ea Botho

Sebelisa Khoele ea Motlakase e Nepahetseng. Sebelisa feela thapo ea motlakase e boletsoeng bakeng sa sehlahisoa sena mme e netefalitsoe bakeng sa naha eo e sebelisoang.
Ela Hloko Litekanyetso Tsohle tsa Theminale. Ho qoba kotsi ea mollo kapa ts'oenyeho, hlokomela lintlha tsohle le matšoao a sehlahisoa. Sheba bukana ea lihlahisoa bakeng sa lintlha tse ling tsa lintlha pele u etsa likhokahano le sehlahisoa.

Se ke oa sebelisa monyetla ho theminale efe kapa efe, ho kenyeletsoa terminal e tloaelehileng e fetang tekanyo e phahameng ea theminale eo.
U se ke Ua Sebelisa Ntle le Likoahelo.
Se ke oa sebelisa sehlahisoa sena ka likoahelo kapa liphanele tse tlositsoeng.
Qoba Potoloho e Pepesitsoeng. Se ke oa ama likhokahano tse pepesitsoeng le likarolo ha motlakase o le teng.

U se ke Ua Sebelisana le Liphoso Tse Likahalang.
Haeba u belaela hore sehlahisoa sena se senyehile, se hlahlojoe ke basebeletsi ba nang le tsebo.

Se ke oa Sebetsa ka Metsi / D.amp Maemo. U se ke Ua Sebetsa Sebakeng se Phatlohileng. Boloka Libaka tsa Sehlahisoa li hloekile ebile li omme

Tlhokomeliso: statements identify conditions or practices that could result in damage to this product or other property.

Fetileview ea Advantest V93000 High Speed ​​I/O (HSIO) Test System

Sistimi ea tlhahlobo ea IO HSIO

The Advantest V93000 High Speed I/O (HSIO) Test System allows V93000 users to source and measure DUT signals up to 56GBaud PAM4. See the AT93000 brochure for information about this HSIO test system feature located at V93000 ATE Test Solutions | MultiLane (multilaneinc.com)

In Figure 1, the AT93000 twinning frame (TRAME) is hard docked on top of a V93000 test head. The AT93000 is compatible with CTH and STH Advantest V93000 testheads. The user’s DUT loadboard is hard docked on top of the TFRAME and the device handler or wafer prober is hard docked to the DUT loadboard. For wafer probe, the TFRAME would be upside down from this picture. Figure 1 shows the HSIO1 twinning frame docked to a CTH testhead with one of sixteen populated Pogo Segments. An exploded view ea likotoana tsena motho ka mong e bontšoa Figure 2, ho akarelletsa le ho fihlela ho tse 'nè Multilane seletsa lik'hasete.

Sistimi ea tlhahlobo ea IO HSIO

HSIO is an ATE industry acronym for “High Speed Input/Output”. The AT93000 is an HSIO solution

Sistimi ea tlhahlobo ea IO HSIO

Tsela e kholotage ea sistimi ea ATE ha e bapisoa le ho sebelisa lisebelisoa tsa benchtop, ke hore tsela ea mats'oao lipakeng tsa DUT le lisebelisoa tsa Cassette e khuts'oane haholo ka hona e fokotsa tahlehelo ea ho kenya le ho khutla. Tlhōlisano ea liteishene tsa AT93000 e fihla ho likanale tse 32 haeba lik'hasete tsohle tse 4 li na le batho ba bangata.

Sistimi ea tlhahlobo ea IO HSIO

E 'ngoe le e' ngoe ea lik'hasete tse 'nè tsa Multilane e na le sesebelisoa se le seng kapa tse peli tsa Multilane tsa lebelo le phahameng. Sheba Bukana ea Mosebelisi ea seletsa se seng le se seng bakeng sa pinout ea sehokelo sa blindmate sa seletsa se ka har'a khasete. Litaelo tsa lisebelisoa le li-database li ka fumanoa ho ATE | MultiLane (multilaneinc.com). Setšoantšo sa 5 se bontša lehlakore le le leng la k'hasete le tlositsoeng sekoahelo se sireletsang. PCB ena e pepesitsoeng ke sesebelisoa sa 4-channel (se fapaneng) Multilane. Lehlakoreng le leng la k'hasete le ka ba le sesebelisoa sa bobeli sa 4-channel Multilane bakeng sa kakaretso ea litsela tse fapaneng tsa 8 ka k'hasete. Setšoantšo sa 5 se boetse se bontša sehokelo sa backplane. Li-pinouts tsa Buka ea Mosebelisi li lebisitsoe ho sehokelo sena. Sesebelisoa se ka lehlakoreng le leng la k'hasete se shebane le leqephe e le hore sehokelo sa sona sa mokokotlo se be ka lehlakoreng le ka morao, hukung e ka tlase e ka letsohong le letšehali. Bakeng sa mohlalaample, a cassette might contain a 4-channel AT4039D BERT on side 1 of the cassette and a 4-channel AT4025 DSO on side 2 of the cassette. In the case of 8-channel instruments, like the 8-channel AT4079B BERT, there will only be one 8-ch instrument in the cassette with one connector due to blindmate 32-pins limitation.

Sistimi ea tlhahlobo ea IO HSIO

Setšoantšo sa 6 se bonts'a sebaka sa AT93000 se tlas'a boto ea thepa e koetsoeng.

Sistimi ea tlhahlobo ea IO HSIO

 

Sistimi ea tlhahlobo ea IO HSIO

Litšupiso tsa Sebaka sa Cassette le Backplane

Bakeng sa ho ts'oara maemo ho litlhophiso tsohle tsa bareki, li-backplane le linomoro tsa litšupiso tsa lik'hasete li khethiloe ka boikhethelo hore li hlalosoe joalo ka ha ho bonts'itsoe ho Setšoantšo sa 7. Li-quadrants tse leshome le metso e tšeletseng tse ngotsoeng 1A ho isa ho 8B ke Advantest defined labels2. Metsoako ea "motsu holimo" foreiming e nang le mafahla e hlalosoa e le "UP". Lisebelisoa tse ka lehlakoreng le letona la lik'hasete li hokeloa ka har'a sefofane sa mokokotlo 2. Lisebelisoa tse ka lehlakoreng le letšehali la lik'hasete li hokeloa ka har'a sefofane sa mokokotlo 1. Litokomane tsa mosebelisi li lokela ho fanoa ho hlalosetsa sets'oants'o sa lik'hasete hore na se hokele khasete ka tsela efe. Sefofane se ka morao seo sesebelisoa se kenngoeng ho sona se boetse se ama leano la Master Clock. Sheba "Master/Slave Clock Sync Configuration on AT93000 backplanes" leqepheng la 9.

Sistimi ea tlhahlobo ea IO HSIO

A subset of these quadrants brings the V93000 resources up to the loadboard. Advantest P/N E8028-PSD

Sistimi ea tlhahlobo ea IO HSIO

Tlhophiso ea Sync ea Master/Slave Clock ho li-backplane tsa AT93000

Oache e kholo e ka hlahisoa ke e 'ngoe ea lisebelisoa tsa BERT tse kentsoeng kapa ka oache e tsoang ho DUT loadboard. Ho ka ba le sesupa-nako se le seng feela bakeng sa ho hokahanya li-BERT le li-DSO kaofela sefofaneng se seng le se seng se ka morao. Lisebelisoa tse ling tsohle tse sefofaneng seo se ka morao li sebetsa e le makhoba a oache 'me li tla hokahanya ts'ebetso ea tsona ho sesebelisoa kapa oache e kholo ea loadboard. Tlhophiso ea oache ea Master / Slave e laoloa ka li-switches ho backplane 1 le backplane 2 mme e hlalosoa hamorao karolong ena.

Haeba oache e tsoa ho DUT kapa V93000, lisebelisoa tsohle tsa khasete li tla ba makhoba a oache e ntle ea kantle. Tabeng ena, oache ea ka ntle ea phapang3 e lokela ho kenngoa ho "clock-in" lihokelo tsa SMP ka sefofaneng se ka morao se nang le lisebelisoa tsa makhoba, ho sebelisa likhoele tse peli tse lebelo le phahameng. Sheba lipampiri tsa lisebelisoa tsa Multilane bakeng sa maqhubu a mangata a sync oa oache. Ho fumana tlhaloso ea ho romela matšoao a oache ea DUT lifofaneng tse ka morao tsa ML ka boto ea malapa, bona Multilane Family Board Documentation.

Litlhophiso tsa Backplane Switch

Li-switches tsa backplane li laola hore na ke oache efe ea sesebelisoa (kapa oache ea loadboard) e laolang khokahano ea oache lipakeng tsa lisebelisoa4. Ho na le li-switches le likhoele tsa switjha sefofaneng se seng le se seng se ka morao.

Single-ended clocks coming from the DUT loadboard are not supported. They must be differential.

For older backplanes, refer to

Li-switch straps ke tsa tšebeliso ea ka hare ea Multilane feela 'me ha ea lokela ho fetoloa ho tloha ho se bontšitsoeng ho Setšoantšo sa 10.

Sistimi ea tlhahlobo ea IO HSIO

Lihokelo tsa ML backplane SMPM li bonts'itsoe setšoantšong se ka tlase ka ho le letšehali sa Setšoantšo sa 10. Lithapo li ka hokela ho tloha sefofaneng sa morao sa 1 ho ea ho sefofane sa 2 kapa ho board ea lelapa joalo ka ha ho bonts'itsoe ho Setšoantšo sa 11. e fumanehang ho hokeloa letlapeng la thepa la DUT.

Sistimi ea tlhahlobo ea IO HSIO

Ha re bua ka Setšoantšo sa 10, e 'ngoe le e' ngoe ea li-switches tse 5 sefofaneng se seng le se seng se ka morao se laola mekhoa ea master / lekhoba ka o mong oa mekhoa e 'meli:

Sehlomathiso: Litlhophiso tsa khale tsa Revision Backplane Clock Jumper leqepheng la 17.

1. Manually: Set each switch to either 3V3 or GND
2. USB Programming Mode: Set all switches to PRG

Ho beha Monghali / Lekhoba ka letsoho

Beha li-switches tse 5 sefofaneng se seng le se seng u sebelisa setšoantšo sa 1Setšoantšo sa 12 le tafole ho Setšoantšo sa 13.

Sistimi ea tlhahlobo ea IO HSIO

Sistimi ea tlhahlobo ea IO HSIO

Ho beha Monghali / Lekhoba ho sebelisa Mokhoa oa Lenaneo oa USB

Ikopanye le Multilane haeba USB Programming Mode e tla sebelisoa.

Mohato oa 1: Beha li-switches tsohle ho PRG
Mohato oa 2: Hokela laptop ho koung ea USB e bontšitsoeng ho Setšoantšo sa 14
Mohato oa 3: Fumana ML AT4000 GUI
Mohato oa 4: Sebelisa GUI e bontšitsoeng ho Setšoantšo sa 15 ho beha e 'ngoe ea lisebelisoa e le monghali kapa ho beha lisebelisoa tsohle tsa makhoba. Ha makhoba kaofela, tebello ke hore monghali o tla be a tsoa sefofaneng se seng se ka morao kapa a tsoa DUT loadboard ka boto ea lelapa.

Sistimi ea tlhahlobo ea IO HSIO

Boto ea Lelapa

Multilane family board, AT93000-1900002, ke tharollo ea sepheo se akaretsang 'me e lokiselitsoe lisebelisoa tsa lebelo le phahameng tse nang le lipalo tse tlase tsa pin tsa dijithale le litlhoko tse tlase tsa hajoale. Haeba boto ena ea Lelapa e sa lumellane le kopo ea hau 'me u hloka khetho e fapaneng ea lisebelisoa tsa tlhahlobo ea V93000, ho tla tlameha ho raloa boto ea lelapa e tloaelehileng.
V93000 mapped resources through the AT93000-1900002 are as follows:

• 11x PS1600 (1408 pins)
• 3x PS9G (192 pins)
• 4x DPS64 (256 supplies)
• 2x DPS128 (256 supplies)
• 2x UHC4 (8 supplies @ 40A)
• 1x MBAV8

Ikopanye le Advantest bakeng sa lintlha tse ling mabapi le lisebelisoa tsa tlhahlobo ea V93000. Lintlha tse ling mabapi le Boto ea Lelapa ea AT93000-1900002 li ka fumanoa ho AT93000-1900002 | Litsela tse ngata (multilaneinc.com)

Mehloli ea Moea, Matla, le Ethernet

Lisebelisoa tsa lik'hasete tsa AT93000 li

  • Ho pholile ka ho sebelisa moea o petelitsoeng
  • E tsamaisoa ho tsoa phepelong ea kantle ea +12V
  • Ho buisanoa le ka ethernet

All these system resources are supply by an external utility box. Refer to the Utility box manual at AT93000-UBOX | MultiLane (multilaneinc.com)

Tokisetso ea Sebaka le Tlhophiso

Sheba libuka tsa ho lokisa le ho kenya ho V93000 ATE Test Solutions | MultiLane (multilaneinc.com)

Ho emisa TFRAME ho V93000 testhead

AT93000 e boima ba hoo e ka bang 35Kg, kahoo ho ka hlokahala mofuta o itseng oa thuso ea ho phahamisa mochini. Bakeng sa tlhahisoleseling e eketsehileng mabapi le ho sebelisa lifti ea mochini ho thusa ho emisa TFRAME, sheba ho Advantest Service Documentation, Topic 342435, "Ho Phahamisa Thepa ea Twinning".

Sistimi ea tlhahlobo ea IO HSIO

Lihokelo tsa Ethernet le Aterese ea IP

Lisebelisoa tsa Multilane li laoloa ke liaterese tsa IP tsa motho ka mong. Liaterese tsa IP li ngotsoe ka thata 'me ha li fanoe ka matla ka nako ea ho sebetsa (DHCP). Bakeng sa thuso ea ho khetha likhokahano tse nepahetseng tsa ethernet bakeng sa sesebelisoa ka seng, ikopanye le Multilane ho ATE-FAE@multilaneinc.com
Ho kenya software ha o laola AT93000 ka V93000 Smartest
Sheba buka ea ho lokisetsa sebaka ho V93000 ATE Test Solutions | Litsela tse ngata (multilaneinc.com)

Customer Loadboard

Sheba litokomane tsa ho qetela tsa Test kapa Wafer Test loadboard ho Final Test Loadboard le Wafer Test Loadboard.

Sehlomathiso: Example Customer Documentation

Mona ke litokomane tseo Multilane e li sebelisang ho netefatsa litlhophiso tsa bareki tse sa fetoheng ho tloha femeng ea rona. Lintho tse RED li ikhethile bakeng sa kopano ka 'ngoe. Lintho tse ka RED mona ke tsa khaleample 'me e lokela ho fetoloa ho lumellana le litlhoko tsa kopano ea moreki

Sistimi ea tlhahlobo ea IO HSIO

Sehlomathiso: Ho kenya software ha o laola AT93000 ka PC

AT93000 e ka boela ea laoloa ka PC ka ho hokahanya likou tsa Ethernet ho PC

Litlhoko tse tlase tsa Hardware tsa PC ke tse latelang:

  • Windows XP SP3 kapa ho feta
  • Bonyane 2 GB ea RAM
  • Karete e le 'ngoe ea Ethernet ho theha khokahano le sesebelisoa (1 Multilane ethernet ports)
  • Pentium 4 processor 2.0 GHz kapa ho feta
  • NET Framework 4.0
    PC software installation follows. To use an ML instrument under Windows XP, Windows 7 and Vista, it is important that the correct start-up sequence is followed:
  • Netefatsa hore Microsoft .NET Framework 4.0 e kentsoe
  • Kenya sesebelisoa sa GUI software ho tsoa sechabeng sa MultiLane websebaka
    – Go to ATE | MultiLane (multilaneinc.com)
    – Scroll down: MultiLane Instruments for V93000 → Click on any instrument (eg, AT4039E)
    – You will find the instrument GUI here

Sistimi ea tlhahlobo ea IO HSIO

  • Hokela thapo ea matla ho sefahleho
  • Fetola IP ea sesebelisoa hore e lumellane le marang-rang
    – Multilane instruments come with preassigned IP addresses
    – The IP address can be manually changed via their GUI
    – DHCP is not supported
  • Puisano ka Ethernet port ea hlokahala bakeng sa ho fumana data
  • Hokela thapo ea ethernet ho faceplate. Ho ipapisitse le ho kenya lisebelisoa, likhokahano tse 2 tsa ethernet li ka hlokahala
  • Hona joale sesebelisoa se matlafalitsoe, se na le IP e nepahetseng, thapo ea Ethernet e hokahanya sesebelisoa ho PC le GUI e kentsoeng ka nepo.
  • Ho bula GUI, tobetsa habeli ho letšoao la software le fumanehang bukeng ea Desktop

Sehlomathiso: Litlhophiso tsa khale tsa Revision Backplane Clock Jumper (AT4000 REV B)

Sefofane sa morao sa AT4000 REV B se sebelisa li-jumpers ho e-na le li-switches ho laola khetho ea oache ea MASTER / LEKHOBA.

Sistimi ea tlhahlobo ea IO HSIO

Ho seta MASTER/LEKHOBA, sheba tafole e latelang:

U450 ke MASTER U451 ke MASTER U452 ke MASTER U453 ke MASTER Kaofela U45x LEKHOBA
U3 0 0 1 1 0
U5 1 1 0 1 1
U7 1 1 0 0 0
U12 1 1 1 1 0
U13 0 1 0 0 0

 

Moruti No. Lihlomathiso Letsatsi la ntlafatso
Karolo Tlhaloso
0.9 Phetolelo ea pele e kentsoe Multilane websebaka
0.9.1 Added appendix “Loadboard reference designators”
Added cassette #’s
01 14 2021
0.9.2 U13 e fetotsoe ho "0" bakeng sa tlhophiso ea "ALL SLAVE". La 2 Hlakubele 2021
0.9.3 Sehlomathiso 4 Sehlomathiso se ekelitsoeng se bonts'ang setšoantšo sa block block ea sistimi La 26 Mphalane 2021
0.9.4 Tsohle E ntlafalitse likarolo tsohle ho bonts'a liphetoho tsa ECO tse entsoeng ka 2022 La 11 Mphalane 2022

Litlhaloso tsa Sehlahisoa

  • Lebitso la Sehlahisoa: Sistimi ea AT93000
  • Moetsi: MultiLane Inc.
  • Patents: E koahetsoe ke litokelo tsa molao tsa US le tsa kantle ho naha
  • Lithibelo tsa Tšebeliso: Lithibelo tsa 'muso lia sebetsa
  • Price Change Policy: Specifications and price change privileges reserved

Ikopanye Sales@multilaneinc.com bakeng sa lintlha tsa thekiso.
Ikopanye ATE-FAE@multilaneinc.com for additional technical information


LBH

P: A na nka sebelisa thapo ea motlakase ho tsoa sehlahisoa se fapaneng le Sistimi ea AT93000?

A: It is recommended to only use the power cord specified for the AT93000 System to ensure safe and proper functionality.

P: Ke tseba joang haeba ho na le tšenyo ea sehlahisoa?

A: If you suspect any damage or abnormalities in the product’s operation, immediately stop use and contact qualified service personnel for inspection.

Litokomane / Lisebelisoa

multiLaneinc AT93000 High Speed ​​I/O HSIO Test System [pdf] Bukana ea Mosebelisi
V93000, AT93000, AT93000 High Speed ​​IO HSIO Test System, AT93000, High Speed ​​IO HSIO Test System, IO HSIO Test System, HSIO Test System, Test System

Litšupiso

Tlohela maikutlo

Aterese ea hau ea lengolo-tsoibila e ke ke ea phatlalatsoa. Libaka tse hlokahalang li tšoailoe *