Lethathamo la lintlha tsa MPG
Mohlahlobi oa OLED
MPG 491CQP QD-OLED (3FA8)
Bukana ea Mosebelisi

Khatiso
V1.0, 2023/12

Rea qala

Khaolo ena e u fa leseli mabapi le mekhoa ea ho seta hardware. Ha u ntse u hokela lisebelisoa, ela hloko ha u tšoara lisebelisoa 'me u sebelise leqhama le theohileng letsohong ho qoba motlakase o sa fetoheng.
Litaba tsa Sephutheloana

Hlokomela	MPG 491CQP QD-OLED
Litokomane	Tataiso ea ho Qala ka Potlako
Lisebelisoa	Emang
	Ema Base ka Screw(li)
	Screw for Wall Mount Bracket(ma)
	Mohala oa Matla
Lithapo	Ultra High Speed ​​HDMI™ Cable (Boikhethelo)
	USB Upstream Cable (Boikhethelo) (bakeng sa USB Type-B Upstream Port)

  Bohlokoa

• Ikopanye le sebaka sa hau sa theko kapa morekisi oa lehae haeba e 'ngoe ea lintho e senyehile kapa e le sieo.
• Litaba tsa sephutheloana li ka fapana ho ea ka linaha.
• Thapo ea motlakase e kenyellelitsoeng ke ea sesebelisoa sena feela 'me ha ea lokela ho sebelisoa le lihlahisoa tse ling.

Ho kenya Monitor Stand

1. Tlohela sehlahlo ka har'a sephutheloana sa eona se sireletsang. Lokisetsa sebaka sa ho ema ho groove ea ho shebella.
2. Sututsa sethala ho leba groove ea monitor ho fihlela e notleha.
3. Kopanya setsi ho setopo 'me u tiise screw ea motheo ho tiisa motheo.
4. Etsa bonnete ba hore kopano ea ho ema e kentsoe hantle pele u beha mochine o otlolohile.

  Bohlokoa

• Beha sebonela-hōle sebakeng se bonolo, se sirelelitsoeng ho qoba ho ngoapa phanele ea ponts'o.
• U se ke ua sebelisa lintho tse bohale holim'a phanele.
• The groove bakeng sa ho kenya bracket e emeng e ka boela ea sebelisoa bakeng sa ho kenya lebota. Ka kopo, ikopanye le morekisi oa hau bakeng sa lisebelisoa tse nepahetseng tsa lebota.
• Sehlahisoa sena se tla le NO filimi e sireletsang e tla tlosoa ke mosebedisi! Tšenyo efe kapa efe ea mochini ho sehlahisoa ho kenyelletsa ho tlosoa ha filimi ea polarizing e ka ama tiisetso!

Ho fetola Monitor
Monitor ena e etselitsoe ho holisa hau viewho fana ka boiketlo ka bokhoni ba eona ba ho fetola.
  Bohlokoa
Qoba ho thetsa phanele ea ponts'o ha u lokisa sebali.

Hlokomelaview

1	Matla a LED E khantšitsoe ka bosoeu ka mor'a hore mochine o butsoe. Haeba ho se na tlhahiso ea lets'oao, LED e tla fetoha lamunu. Ho bonesa ka mmala wa lamunu ha sebonelatsi se le Boemong ba Stand-by.
2	Jack Power
3	Senotlolo sa Macro Ho kenya tshebetsong MSI Gaming Intelligence Application.
4	Navi Key
5	Konopo ea Matla
6	Sehokelo sa HDMI™ E ts'ehetsa HDMI™ CEC, 5120×1440@144Hz joalo ka ha ho boletsoe ho HDMI™ 2.1.
7	Sehokelo sa HDMI™ E ts'ehetsa 5120×1440@144Hz joalo ka ha ho boletsoe ho HDMI™ 2.1.
8	DisplayPort E ts'ehetsa 5120 × 1440@144Hz joalo ka ha ho boletsoe ho DisplayPort 1.4a.
9	USB Type-C Port Boema-kepe bona bo tšehetsa Mokhoa oa DisplayPort Alternate (DP Alt) le matla a fihlang ho 20V/4.5A (90W) phano. Bohlokoa Mohloli oa lets'oao la hau la USB-C le thapo li tlameha ho ts'ehetsa Mokhoa o Mong oa DisplayPort hore o khone tlhahiso ea video ho leihlo.
10	Mofuta oa A-USB 2.0
11	USB 2.0 Type-B Boema-kepe bo ka Holimo Bakeng sa Cable ea USB Upstream. Bohlokoa Sheba sephutheloana sa USB Upstream Cable 'me u se kopanye le PC ebe u beha leihlo. Ha thapo ena e se e hokahantsoe, Liema-kepe tsa USB Type-A tse ka tlase ho sebui li tla be li loketse ho sebelisoa. Phano ea Matla ea USB Type-C 5V / 3A (15W) 9V / 3A (27W) 12V / 3A (36W) 15V / 3A (45W) 20V / 3.25A (65W) 20V / 4.5A (90W)
12	Li-headphone Jack
13	Kensington Lock

Ho hokela Monitor ho PC

1. Koala komporo ea hau.
2. Hokela thapo ea video ho tsoa ho sebono ho komporo ea hau.
3. Hokela thapo ea motlakase ho jeko ea motlakase ea ho beha leihlo. (Setšoantšo A)
4. Hokela thapo ea motlakase sebakeng sa motlakase. (Setšoantšo sa B)
5. Bulela monitor. (Setšoantšo sa C)
6. Matla a khomphuteng le sebatli se tla iphumanela mohloli oa lets'oao.

Setup ea OSD

Khaolo ena e u fa leseli la bohlokoa mabapi le Setupo sa OSD.
Bohlokoa
Lintlha tsohle li ka fetoha ntle le tsebiso pele.
Navi Key
Sebapali se tla le senotlolo sa Navi, taolo e nang le likarolo tse ngata e thusang ho tsamaea ho menu ea On-Screen Display (OSD).

Holimo/Fase/Ho le Letshehadi/Ka ho le letona:

• ho kgetha dimenu tsa tshebetso le dintho
• ho lokisa maemo a tshebetso
• ho kena/ho tswa ho dimenu tsa tshebetso

Tlanya (OK):

• ho qala Pontšo ea skrineng (OSD)
• ho kenya dimenu tse nyane
• ho tiisa kgetho kapa boemo

Hot Key

• Basebelisi ba ka kena ka har'a menyetla ea tšebetso e seng e setiloe ka ho isa Navi Key holimo, tlase, ka ho le letšehali kapa ka ho le letona ha menu ea OSD e sa sebetse.
• Basebelisi ba ka iketsetsa Li-Hot Keys tsa bona hore ba kene ka har'a menyetla e fapaneng ea ts'ebetso.

Limenu tsa OSD

Bohlokoa
Litlhophiso tse latelang li tla ntšoa ha matšoao a HDR a amoheloa:

∙ Pono ea Bosiu ∙ AI Pono ∙ Leseli le Leputsoa le Tlase ∙ Khanya

∙ Phapang ∙ Mocheso oa Mobala ∙ Optix Scope ∙ PIP/PBP

GI

Mokhahlelo oa Mokhahlelo oa Pele	2nd/3rd Level Menu		Tlhaloso
KVM	Auto		∙ Auto e lumella sebali hore se fetohe lipakeng tsa mehloli ea USB, joalo ka likonopo, litoeba kapa lisebelisoa tse ling tsa USB. ∙ Basebelisi ba ka boela ba khetha boema-kepe ba Upstream kapa USB Type-C e le eona feela mohloli oa lets'oao la USB.
	Holimo
	Mofuta oa C
Smart Crosshair	Letšoao	Ha ho letho	∙ Ka algorithm ea AI, ts'ebetso ena e ntlafatsa ponahalo ea papali ea crosshair. ∙ Basebelisi ba ka khetha 'mala le boemo ba crosshair.
	Mmala	Bosoeu
		Khubedu
		Auto
	Boemo
	Seta bocha
Optix Scope	Boholo ba Scope	Nyenyane	∙ Sebaka se bohareng se tla atometsa ha Optix Scope e buletsoe. ∙ Smart Crosshair le Optix Scope li ka lumelloa ka nako e le 'ngoe. ∙ Ho kenya tšebetsong Optix Scope ho tla ama:
		Mahareng
		E kholoanyane
	Karo-karolelano	x1.5
		x2
		x4
	TLOA
	ON

Papali

Mokhahlelo oa Mokhahlelo oa Pele	2nd/3rd Level Menu		Tlhaloso
Mokhoa oa Papali	Mobala oa Premium		∙ Sebelisa Konopo ea Holimo kapa Tlase ho khetha le peleview litlamorao tsa mode. ∙ Tobetsa konopo ea OK ho netefatsa le ho sebelisa mofuta oa hau oa mofuta.
	Mosebedisi
	FPS
	Peisong
	RTS
	RPG
Pono ya Bosiu	TLOA		∙ Ts'ebetso ena e ntlafatsa khanya ea bokamorao mme e khothaletsoa lipapaling tsa FPS.
	Tloaelehileng
	E matla
	E matla ka ho fetisisa
	AI
AI Pono	TLOA		∙ AI Vision e ntlafatsa boleng ba setšoantšo ka ho ntlafatsa phapang ea litšoantšo le khanya ea bokamorao. ∙ Ho kenya tšebetsong pono ea AI ho tla ama: Mosebetsi o Amehileng Boemo ba Tshebetso  » Pono ea Bosiu Ha e khone ho khetha
	ON
Refresh Rate	Sebaka	Left Top	∙ Sebaka se ka fetoloa ho OSD Menu. Tobetsa konopo ea OK ho netefatsa le ho sebelisa Refresh Rate Location ea hau. ∙ Sesebelisoa sena sea latela ebile se sebetsa ho Operating System's preset Refresh Rate.
		Right Top
		Ka ho le letšehali Tlase
		Right Bottom
		Iketsetse
	TLOA
	ON
Alamo Clock	Sebaka	Left Top	∙ Kamora ho beha nako, tobetsa konopo ea OK ho kenya sebali. ∙ Basebelisi ba tlameha ho khutlisa Alarm Clock ea bona e seng e setiloe ka mor'a tahlehelo efe kapa efe ea motlakase oa AC le ho hokela hape.
		Right Top
		Ka ho le letšehali Tlase
		Right Bottom
		Iketsetse
	TLOA
	15:00	00:01 ~ 99:59
	30:00
	45:00
	60:00

Mokhahlelo oa Mokhahlelo oa Pele	2nd/3rd Level Menu	Tlhaloso
Adaptive-Sync	TLOA	∙ Adaptive-Sync e thibela ho taboha ha skrine. ∙ Ho kenya tšebetsong Adaptive-Sync ho tla ama: Mosebetsi o Amehileng Boemo ba Tshebetso  »PIP/PBP » Optix Scope Beha ho OFF  »Skrine sa boholo 1:1 Seta ho Auto
	ON

Setsebi

Mokhahlelo oa Mokhahlelo oa Pele	Mokhahlelo oa 2 Level	Tlhaloso
Mokhoa oa Pro	Eco	∙ Sebelisa Konopo ea Holimo kapa Tlase ho khetha le peleview litlamorao tsa mode. ∙ Tobetsa konopo ea OK ho netefatsa le ho sebelisa mofuta oa hau oa mofuta. ∙ Boemo ba kamehla ba "Eco" bo kopana le litlhoko tsa TÜV Rheinland tsa "Low Blue Light" le setifikeiti sa Eyesafe. ∙ Ho kenya tšebetsong sRGB, Adobe RGB, Display P3 ho tla ama: Mosebetsi o Amehileng Boemo ba Tshebetso  » Mocheso oa Mebala » Leseli le Leputsoa le Tlase » Phapang Ha e khone ho khetha
	Mosebedisi
	Anti-Blue
	Movie
	Ofisi
	sRGB
	Adobe RGB
	Hlahisa P3
Leseli le Leputsoa le Tlase	TLOA	∙ Low Blue Light e sireletsa mahlo a hao khahlanong le leseli le leputsoa. Ha e lumelletsoe, Leseli le Leputsoa la Low le fetola mocheso oa 'mala oa skrini hore o be mosehla haholoanyane. ∙ Ha Pro Mode e behiloe ho Anti-Blue, hoa tlameha ho nolofalletsa Leseli le Leputsoa le Tlase. ∙ Monitor ena ke "Low Blue Light backlight monitor", e tla fokotsa leseli le leputsoa le hlahisoang ntle le ho fetola ts'ebetso ea OSD.
	ON
Ntlafatso ea Litšoantšo	TLOA	∙ Ntlafatso ea Sets'oants'o e ntlafatsa likarolo tsa litšoantšo ho ntlafatsa ts'ebetso ea tsona.
	E fokola
	Mahareng
	E matla
	E matla ka ho fetisisa

Setšoantšo

Mokhahlelo oa Mokhahlelo oa Pele	2nd/3rd Level Menu		Tlhaloso
Khanya	0-100		∙ Lokisa Khanya hantle ho latela mabone a potolohileng.
Bapisa	0-100		∙ Lokisa Contrast ka nepo ho khatholla mahlo a hau.
bohale	0-5		∙ Ho hlaka ho ntlafatsa ho hlaka le lintlha tsa litšoantšo.
Mocheso oa Mobala	Pholile		∙ Sebelisa Konopo ea Holimo kapa Tlase ho khetha le peleview litlamorao tsa mode. ∙ Tobetsa konopo ea OK ho netefatsa le ho sebelisa mofuta oa hau oa mofuta. ∙ Basebelisi ba ka fetola Mocheso oa Mobala ka mokhoa oa ho Itloaetsa.
	Tloaelehileng
	E futhumetse
	Boikemisetso	R (0-100)
		G (0-100)
		EA-0-100
Boholo ba skrine	Auto		∙ Basebelisi ba ka fetola boholo ba skrini ka mokhoa ofe kapa ofe, qeto efe kapa efe le sekhahla sa ho khatholla skrineng. ∙ Ho kenya tšebetsong Size 1: 1 ho tla ama: Mosebetsi o Amehileng Boemo ba Tshebetso  »Adaptive-Sync »PIP/PBP » Optix Scope Beha ho OFF
	4:3
	16:9
	32:9
	1:1
DisplayHDR	'Nete e Ntšo 400		∙ Basebelisi ba ka beha DisplayHDR ho True Black 400 kapa Peak 1000 nits.
	Tlhōrō ea 1000 nits

Mohloli oa Kenyeletso

Mokhahlelo oa Mokhahlelo oa Pele	Mokhahlelo oa 2 Level	Tlhaloso
HDMI ™ 1		∙ Basebelisi ba ka fetola Mohloli oa Kenyelletso ka mokhoa ofe kapa ofe.
HDMI ™ 2
DP
Mofuta oa C
Auto Scan	TLOA	∙ Basebelisi ba ka sebelisa Senotlolo sa Navi ho khetha Mohloli oa ho Kena maemong a ka tlase: • Ha “Auto Scan” e setetswe ho “tima” le sehlahlobi se le mokgweng wa ho boloka matla; • Ha lebokose la molaetsa la “No Signal” le bontshwa hodima sehlahlo.
	ON

PIP/PBP

Mokhahlelo oa Mokhahlelo oa Pele	2nd/3rd Level Menu		Tlhaloso
TLOA			∙ PIP (Setšoantšo se Setšoantšong) e lumella basebelisi ho hlahisa mehloli e mengata ea livideo ka nako e le 'ngoe skrineng se le seng. Lenaneo le le leng le hlahisoa skrineng se felletseng ka nako e ts'oanang ha lenaneo le le leng kapa tse ling li hlahisoa lifensetereng tse nyane. ∙ PBP (Setšoantšo ka Setšoantšo) ke tšobotsi e tšoanang e bonts'ang mehloli e 'meli ea ho kenya ka lehlakoreng le leng skrineng. ∙ Display switch e lumella basebelisi ho fetoha lipakeng tsa mehloli ea mantlha le ea bobeli. ∙ Haeba ho na le lets'oao le le leng feela, Display Switch le Audio switch li tla ntšoa. ∙ Basebelisi ba ka fetola karolelano ea karohano ea lifensetere ka ho chencha Mode 1/2/ Customize. ∙ Ho kenya tšebetsong PIP/PBP ho tla ama: Mosebetsi o Amehileng Boemo ba Tshebetso  »Adaptive-Sync » Optix Scope Beha ho OFF  »BontšaHDR » HDMI™ 2.1 Ha e khone ho khetha  » HDMI™ CEC Beha ho OFF  »PIP: Screen Size 1:1 »PBP: Boholo ba skrine 4:3/ 16:9/ 32:9/ 1:1 Seta ho Auto
PIP	Mohloli	HDMI ™ 1
		HDMI ™ 2
		DP
		Mofuta oa C
	Boholo ba PIP	Nyenyane
		Mahareng
		E kholoanyane
	Sebaka	Left Top
		Right Top
		Ka ho le letšehali Tlase
		Right Bottom
		Iketsetse
	Bontša switch
	Audio Switch
PBP	Mokhoa oa 1
	Mokhoa oa 2
	Iketsetse
	Mohloli 1	HDMI ™ 1
		HDMI ™ 2
		DP
		Mofuta oa C
	Mohloli 2	HDMI ™ 1
		HDMI ™ 2
		DP
		Mofuta oa C
	Bontša switch
	Audio Switch

Navi Key

Mokhahlelo oa Mokhahlelo oa Pele	Mokhahlelo oa 2 Level	Tlhaloso
Holimo Holimo ka ho le Letšehali	TLOA	∙ Lintho tsohle tsa Navi Key li ka fetoloa ka Menus ea OSD.
	Khanya
	Mokhoa oa Papali
	Smart Crosshair
	Alamo Clock
	Mohloli oa Kenyeletso
	Mokhoa oa PIP/PBP
	Refresh Rate
	Info. Ho skrine
	Pono ya Bosiu
	Optix Scope
	KVM

Litlhophiso

Mokhahlelo oa Mokhahlelo oa Pele	Mokhahlelo oa 2 Level	Tlhaloso
Puo	繁體中文	∙ Basebelisi ba tlameha ho tobetsa konopo ea OK ho netefatsa le ho sebelisa maemo a Puo. ∙ Puo ke sebaka se ikemetseng. Litlhophiso tsa puo tsa basebelisi li tla hlakola tse sa sebetseng tsa feme. Ha basebelisi ba seta Botjha ho E, Puo e ke ke ya fetolwa.
	Senyesemane
	Se-Français
	Deutsch
	Setaliana
	Sespañol
	한국어
	Cybo
	Русский
	Português
	简体中文
	Bahasa Indonesia
	Türkçe
	(Lipuo tse ling lia tla haufinyane)
Ponaletso	0-5	∙ Basebelisi ba ka fetola Transparency ka mokhoa ofe kapa ofe.
Nako ea OSD	5-30s	∙ Basebelisi ba ka fetola Nako ea OSD ka mokhoa ofe kapa ofe.

Mokhahlelo oa Mokhahlelo oa Pele	Mokhahlelo oa 2 Level	Tlhaloso
Konopo ea Matla	TLOA	∙ Ha e setiloe HO TIMA, basebelisi ba ka tobetsa konopo ea matla ho tima sebali.
	Ema haufi	∙ Ha e setiloe ho Standby, basebelisi ba ka tobetsa konopo ea matla ho tima phanele le mabone a morao.
Info. Ho skrine	TLOA	∙ Boitsebiso ba boemo ba ho shebella bo tla bontšoa ka lehlakoreng le letona la skrine.
	ON
HDMI ™ 2.1	Kholiso	∙ Ho fihlela qeto e phahameng, basebelisi ba tlameha ho seta HDMI™ 2.1 ho PC.
	PC
HDMI™ CEC	TLOA	∙ HDMI™ CEC (Consumer Electronics Control) e ts'ehetsa Sony PlayStation®, Nintendo® Switch™, Xbox Series X|S le lisebelisoa tse fapaneng tsa audio-visual tse khonang ho CEC. ∙ Haeba HDMI™ CEC e setetsoe ho ON: • Monitor e tla ithela ka bo eona ha sesebelisoa sa CEC se buletsoe. • Sesebediswa sa CEC se tla kena mokgweng wa ho boloka matla ha sehlahloba se tinngwe. • Ha Sony PlayStation®, Nintendo® Switch™, kapa Xbox Series X|S console e hoketsoe, Game Mode le Pro Mode li tla hlongoa ka tsela e iketsang hore e be mekhoa ea kamehla, 'me hamorao li ka fetoloa ho latela mekhoa e ratoang ke basebelisi.
	ON
Mofuta oa C PD Tefiso	TLOA	∙ Ts'ebetso ena e thusa basebelisi ho tjhaja lisebelisoa tsa bona ka sehokelo sa USB Type-C.
	ON
Seta bocha	EE	∙ Basebelisi ba ka hlophisa bocha le ho khutlisetsa litlhophiso ho OSD Default ea mantlha ka mokhoa ofe kapa ofe.
	NO

Tlhokomelo ea MSI OLED

Mokhahlelo oa Mokhahlelo oa Pele	2nd/3rd Level Menu		Tlhaloso
Pixel Shift	Butle		∙ Pixel Shift e tsamaisa lipikselse tsa skrineng sa hau nako le nako ho fokotsa monyetla oa ho chesa skrineng kapa ho boloka setšoantšo.
	Tloaelehileng
	Ka potlako
Panel Sireletsa			∙ Ho boloka boleng ba setšoantšo sa phanele, ts'ebetso ea ts'ireletso ea phanele e tla sebetsa ka bo eona ha e lekola e sebelisa lihora tse fetang 4. ∙ Ts'ebetso ena ea ts'ireletso e ka nka metsotso e 'maloa ho phetheha. ∙ Letšoao la matla le tla benya 'mala oa lamunu ho fihlela ts'ebetso e etsoa. ∙ Nakong ea ts'ebetso, ka kopo u se ke oa ntša thapo ea motlakase ho tsoa ho sebali. ∙ Nakong ea ts'ebetso, tobetsa konopo ea matla hape ho hlakola ts'ebetso ena.
Sireletsa Tsebiso	Auto		∙ Ha e setiloe ho Auto, Protect Notice e tla hlaha ha phanele e feta lihora tse 4 tsa ts'ebeliso e akaretsang. ∙ Ha e behiloe ho Tšebeliso ea lihora tse 16, Protect Notice e tla hlaha ha phanele e feta lihora tse 16 tsa tšebeliso e akaretsang. ∙ Ha Panel Protect e sitisoa, Tsebiso ea Protect e tla hlaha ha ho etsoa matla a latelang.
	Sebelisa lihora tse 16
Ho fumanoa ha Skrine sa Static	TLOA		∙ Haeba Static Screen Detection e behiloe HO ON: • Ha o lemoha lipono tse tsitsitseng ka nako e telele, sebali se fokotsa khanya ho thibela ho chesoa ha skrine. • Hang ha e lemoha lipono tse tsamaeang, sebali se khutlisetsa khanya ea eona e fetileng.
	ON
	Ho qala ka	50 Mets	∙ Ho qala ho lemoha nako eo setšoantšo se sa fetoheng se lulang skrineng.
		100 Mets
	Nako e hlokahalang	120 Mets	∙ Nako e hlokahalang e bolela nako ea ho fokotsa khanya ka mor'a ho lemoha setšoantšo se tsitsitseng bakeng sa metsotsoana e 50/100. ∙ Boemo ba ho fokotsa khanya bo itšetlehile ka boemo ba ho fokotsa boemo.
		240 Mets
	Ho fokotsa boemo	1-7	∙ Basebelisi ba ka khetha boemo ba ho fokotsa khanya. ∙ Ho fokotsa phello ho ipapisitse le tlhophiso ea Brightness/ DisplayHDR.

Mokhahlelo oa Mokhahlelo oa Pele	2nd/3rd Level Menu		Tlhaloso
Ho fumanoa ha Logo e mengata	TLOA		∙ Ts'ebetso ena e thusa ho thibela ts'ebetso ea ho khomarela setšoantšo. Ha e setiloe ho ON, phokotso ea khanya ea libaka tse ngata tsa li-logo e tla kenella haeba li-logo li fumanoa. ∙ Ts'ebetso ena e ke ke ea sebetsa ha sebali se amohela VRR (Variable Refresh Rate) litaba. VRR* Litaba tsa VRR** Ho fumanoa ha Logo e mengata ON EE Beha ho TIMA 'me Ha e khone ho khetha ON NO E ka fetoha TLOA NO
	ON
	Ho fokotsa boemo	1-2	∙ Basebelisi ba ka khetha boemo ba ho fokotsa khanya. ∙ Ho fokotsa phello ho ipapisitse le tlhophiso ea Brightness/ DisplayHDR.
Ho fumanoa ha Taskbar	TLOA		∙ Ts'ebetso ena e thusa ho thibela ts'ebetso ea ho khomarela setšoantšo. Ha e setiloe ho ON, phokotso ea khanya ea libaka tsa barbara ea mesebetsi e tla qala haeba li-taskbar li ka bonoa. ∙ Ts'ebetso ena e ke ke ea sebetsa ha sebali se amohela litaba tsa VRR (Variable Refresh Rate). VRR* Litaba tsa VRR** Ho fumanoa ha Taskbar ON EE Beha ho TIMA & Ha e khone ho kgetha ON NO E ka fetoha TLOA NO
	ON
	Ho fokotsa boemo	1-3	∙ Basebelisi ba ka khetha boemo ba ho fokotsa khanya. ∙ Ho fokotsa phello ho ipapisitse le tlhophiso ea Brightness/ DisplayHDR.
Ho Khetholla Moeli	TLOA		∙ Ts'ebetso ena e thusa ho thibela ts'ebetso ea ho khomarela setšoantšo. Ha e setiloe ho ON, phokotso ea khanya ea libaka tsa moeli e tla qala haeba meeli, joalo ka litlhaku, litšiea le mela e emeng, e fumanoa. ∙ Ts'ebetso ena e ke ke ea sebetsa ha sebali se amohela litaba tsa VRR (Variable Refresh Rate). VRR* Litaba tsa VRR** Ho Khetholla Moeli ON EE Beha ho TIMA & Ha e khone ho kgetha ON NO E ka fetoha TLOA NO
	ON
	Ho fokotsa boemo	1-3	∙ Basebelisi ba ka khetha boemo ba ho fokotsa khanya. ∙ Ho fokotsa phello ho ipapisitse le tlhophiso ea Brightness/ DisplayHDR.

Mokhahlelo oa Mokhahlelo oa Pele	2nd/3rd Level Menu	Tlhaloso
Lintlha tsa Panel ea OLED.		∙ Tšimo ena e bonts'a tlhahisoleseling ea MSI OLED Care.

* HDMI™ VRR (Sekhahla sa Refresh Rate) se hokahana le Adaptive-Sync (ON/ OFF). Bakeng sa boemo ba VRR ON/OFF, ka kopo sheba Adaptive-Sync.
** Ha VRR e setiloe ho ON, monitor scaler e tla bona hore na karete ea litšoantšo e romela litaba tsa VRR.

Litlhaloso

Hlokomela	MPG 491CQP QD-OLED
Boholo	49 inch
Kotlo	1800R
Mofuta oa Panel	QD-OLED
Qeto	5120×1440 (DQHD)
Aspect ratio	32:9
Khanya	SDR: 250 nits (mofuta.)
Phapang karo-karolelano	1500000:1
Refresh Rate	144Hz
Nako ea Karabelo	∙ 0.03ms (GTG) ∙ 0.1ms (Tr+Tf)
I/O	∙ HDMI™ Sehokelo x2 ∙ DisplayPort x1 ∙ Boema-kepe ba USB Type-C x1 ∙ USB 2.0 Mofuta oa A Port x2 ∙ USB 2.0 Type-B Port ea Holimo x1 ∙ Headphone Jack x1
View Li-angles	178°(H) , 178°(V)
DCI-P3 * / sRGB	99.28% / 146.11%
Phekolo ea Bokaholimo	Khahlanong le Boikutlo
Hlahisa Mebala	1.07B (10 bits)
Tlhokomela Likhetho tsa Matla	100-240Vac, 50/60Hz, 3A
Matla Tshebediso (Ka tloaelo)	Matla ho <270W Standby <0.5W Power Off <0.3W
Tokiso (Botelele)	0 ~ 100mm
Tokiso (Tilt)	-5° ~ 20°
Fetola (Swivel)	-30° ~ 30°
Kensington Lock	Ee

Hlokomela		MPG 491CQP QD-OLED
Ho hloa VESA		∙ Mofuta oa Plate: 100 x 100 mm ∙ Mofuta oa Screw: M4 x 10 mm • Bophara ba khoele: 4 mm • Matla a khoele: 0.7 mm • Bolelele ba khoele: 10 mm
Boemo (W x D x H)		1195 x 328 x 410 limilimithara
Boima ba 'mele	Nete	10.3 lik'hilograma
	Gross	16 lik'hilograma
Tikoloho	Ho sebetsa	∙ Mocheso: 0℃ ho isa ho 40℃ ∙ Mongobo: 20% ho 90%, e sa fokotseng ∙ Bophahamo: 0 ~ 5000m
	Polokelo	∙ Mocheso: -20 ℃ ho isa ho 60 ℃ ∙ Mongobo: 10% ho 90%, e sa fokotseng

* Ho ipapisitsoe le maemo a tlhahlobo a CIE1976.

Seta pele Mekhoa ea Pontšo

Bohlokoa
Lintlha tsohle li ka fetoha ntle le tsebiso pele.

Standard	Qeto		Mokhoa o tloaelehileng oa kamehla HDMI™ 2.1 – PC
			HDMI ™	DP	USB-C
QHD	2560x1440	@ 60Hz	V	V	V
		@ 120Hz	V	V	V
WQHD	3840x1080	@ 60Hz	V	V	V
		@ 100Hz	V	V	V
		@ 144Hz	V	V	V
DQHD	5120x1440	@ 60Hz	V	V	V
		@ 100Hz	V	V	V
		@ 120Hz	V	V	V
		@ 144Hz	V	V	V
Qeto ea Nako ea Video	720P		V	V	V
	1080P	@ 60Hz	V	V	V
		@ 120Hz	V	V	V
	2160P	@ 30Hz	V
		@ 60Hz	V
		@ 120Hz	V
	2560x1080P	@ 60Hz	V	V	V
		@ 120Hz	V	V	V
	HDMI™ VRR* bakeng sa PS5		V

Standard	Qeto		HDMI™ 2.1 – Console
			HDMI ™	DP	USB-C
QHD	2560x1440	@ 60Hz	V
		@ 120Hz	V
WQHD	3840x1080	@ 60Hz	V
		@ 100Hz	V
Qeto ea Nako ea Video	720P		V
	1080P	@ 60Hz	V
		@ 120Hz	V
	2160P	@ 30Hz	V
		@ 60Hz	V
		@ 120Hz	V
	2560x1080P	@ 60Hz	V
		@ 120Hz	V
	HDMI™ VRR* bakeng sa PS5		V

Standard	Qeto		PIP Mode (Ha e Tšehetsa HDR)
			HDMI ™	DP	USB-C
HD e felletseng	1920x1080	@ 60Hz	V	V	V
QHD	2560x1440	@ 60Hz	V	V	V
		@ 120Hz	V	V	V
WQHD	3840x1080	@ 60Hz	V	V	V
DQHD	5120x1440	@ 60Hz	V	V	V
Qeto ea Nako ea Video	720P		V	V	V
	1080P	@ 60Hz	V	V	V
		@ 120Hz	V	V	V
	2160P	@ 30Hz	V	V
		@ 50Hz	V	V
		@ 60Hz	V	V
		@ 120Hz	V	V	V

Standard	Qeto		PBP Mode 1 (Ha e Tšehetsa HDR)
			HDMI ™	DP	USB-C
QHD	2560x1440	@ 60Hz	V	V	V
		@ 120Hz	V	V	V
Qeto ea Nako ea Video	720P		V	V	V
	1080P	@ 60Hz	V	V	V
		@ 120Hz	V	V	V
	2160P	@ 60Hz	V	V	V
		@ 120Hz	V	V	V
E sebelisetsoa PBP Full Screen	3840x1440	@ 60Hz	V	V	V
	1280x1440	@ 60Hz	V	V	V

Standard	Qeto		PBP Mode 2/Iketsetse (Ha e Tšehetsa HDR)
			HDMI ™	DP	USB-C
QHD	2560x1440	@ 60Hz	V	V	V
		@ 120Hz	V	V	V
Qeto ea Nako ea Video	720P		V	V	V
	1080P	@ 60Hz	V	V	V
		@ 120Hz	V	V	V
	2160P	@ 60Hz	V	V	V
		@ 120Hz	V	V	V
E sebelisetsoa PBP Full Screen	2560x1440	@ 60Hz	V	V	V

* HDMI™ VRR (Sekhahla sa Refresh Rate) se hokahana le Adaptive-Sync (ON/ OFF).

Ho batle phoso

Matla a LED a tima.

• Tobetsa konopo ea matla ea ho shebella hape.
• Lekola hore na thapo ea motlakase e hokahaneng hantle.

Ha ho setšoantšo.

• Sheba hore na karete ea litšoantšo ea k'homphieutha e kentsoe hantle.
• Lekola hore na komporo le sebali li hokahane le lisebelisoa tsa motlakase 'me li buletsoe.
• Sheba hore na thapo ya letshwao la ho beha leihlo e hoketswe hantle.
• Khomphuta e kanna ea ba maemong a Standby. Tobetsa konopo efe kapa efe ho kenya sehlahlo.

Setšoantšo sa skrini ha se boholo bo nepahetseng kapa bohareng.

• Sheba mekhoa ea ho bonts'a esale pele ho beha komporo maemong a loketseng hore sebonoa se bontšoe.

Ha ho Plug & Play.

• Lekola hore na thapo ea motlakase e hokahaneng hantle.
• Sheba hore na thapo ya letshwao la ho beha leihlo e hoketswe hantle.
• Sheba hore na komporo ea hau le karete ea litšoantšo lia tsamaellana le Plug & Play.

Lits'oants'o, fonte kapa skrini ha lia hlaka, li lerootho kapa li na le mathata a mebala.

• Qoba ho sebelisa lithapo life kapa life tse atolositsoeng tsa video.
• Fetola khanya le phapang.
• Fetola 'mala oa RGB kapa o fetole mocheso oa 'mala.
• Sheba hore na thapo ya letshwao la ho beha leihlo e hoketswe hantle.
• Sheba lithakhisa tse kobehileng holim'a sehokelo sa thapo ea matšoao.

Monitor e qala ho thekesela kapa e bonts'a maqhubu.

• Fetola sekhahla sa ho khatholla ho tsamaisana le bokhoni ba sebali sa hau.
• Ntlafatsa likhanni tsa likarete tsa hau tsa litšoantšo.
• Boloka sebali hole le lisebelisoa tsa motlakase tse ka bakang tšitiso ea motlakase (EMI).

Litaelo tsa Tšireletseho

• Bala litaelo tsa polokeho ka hloko le ka botlalo.
• Litemoso le litemoso tsohle tse sesebelisoa kapa Bukana ea Mosebelisi li lokela ho hlokomeloa.
• Fetisetsa litšebeletso ho basebetsi ba tšoanelehang feela.

Matla

• Etsa bonnete ba hore matla a voltage ka har'a sebaka sa eona sa polokeho 'me e fetotsoe ka mokhoa o nepahetseng ho boleng ba 100 ~ 240V pele e hokahanya sesebelisoa le motlakase.
• Haeba thapo ea motlakase e e-na le plug ea 3-pin, u se ke ua tima phini ea tšireletso ea lefatše ho tloha polakang. Sesebelisoa se tlameha ho hokeloa le sokete e kholo ea lefatše.
• Ka kopo netefatsa hore sistimi ea kabo ea matla sebakeng sa ho kenya e tla fana ka sekhechana sa potoloho se lekantsoeng 120/240V, 20A (boholo).
• Kamehla hakolla thapo ea motlakase kapa u tima sokete ea lebota haeba sesebelisoa se ka tloheloa se sa sebelisoe ka nako e itseng ho fihlela ts'ebeliso ea matla a lefela.
• Beha thapo ea motlakase ka tsela eo batho ba ke keng ba e hata. Se ke oa beha letho thapong ea motlakase.
• Haeba sesebelisoa sena se tla le adaptara, sebelisa feela adaptara ea AC e fanoeng ke MSI e lumelletsoeng ho sebelisoa le sesebediswa sena.

Tikoloho

• Ho fokotsa monyetla oa likotsi tse amanang le mocheso kapa ho chesa sesebelisoa ho feta tekano, u se ke ua beha sesebelisoa sebakeng se bonolo, se sa tsitsang kapa ho thibela lisebelisoa tsa sona tsa moea.
• Sebelisa sesebelisoa sena feela sebakeng se thata, se bataletseng le se tsitsitseng.
• Ho thibela sesebelisoa hore se se ke sa thella, sireletsa sesebelisoa tafoleng, leboteng kapa nthong e tsitsitseng ka sekontiri se thibelang lintlha se thusang ho tšehetsa sesebelisoa hantle le ho se boloka se sireletsehile.
• Ho thibela kotsi ea mollo kapa ts'oenyeho, boloka sesebelisoa sena hole le mongobo le mocheso o phahameng.
• Se ke oa siea sesebelisoa sebakeng se sa tsitsang se nang le mocheso oa polokelo o ka holimo ho 60 ℃ kapa ka tlase ho -20 ℃, se ka senyang sesebelisoa.
• Mocheso o phahameng ka ho fetisisa oa ho sebetsa o pota 40 ℃.
• Ha u hloekisa sesebelisoa, etsa bonnete ba hore u tlosa polaka ea matla. Sebelisa sengoathoana sa lesela le bonolo ho e-na le lik'hemik'hale tsa indasteri ho hloekisa sesebelisoa. Le ka mohla u se ke ua tšela metsi leha e le afe lesobeng; se ka senyang sesebedisoa kapa sa baka tshoso ya motlakase.
• Kamehla beha lintho tse matla tsa makenete kapa tsa motlakase hole le sesebelisoa.
• Haeba ho hlaha e 'ngoe ea maemo a latelang, etsa hore sesebelisoa se hlahlojoe ke basebeletsi ba litšebeletso:
• Thapo ea motlakase kapa polaka e senyehile.
• Mokelikeli o kene ka har'a sesebelisoa.
• Sesebelisoa se pepesitsoe ke mongobo.
• Sesebelisoa ha se sebetse hantle kapa ha o khone ho se fumana ho latela Bukana ea Mosebelisi.
• Sesebelisoa se theohile ebile se senyehile.
• Sesebelisoa se na le letšoao le hlakileng la ho robeha.

Setifikeiti sa TÜV Rheinland

Setifikeiti sa TÜV Rheinland Low Blue Light
Leseli le leputsoa le bontšitsoe ho baka mokhathala oa mahlo le ho se phutholohe. Hona joale MSI e fana ka li-monitor tse nang le setifikeiti sa TÜV Rheinland Low Blue Light ho netefatsa boiketlo ba mahlo le boiketlo ba basebelisi. Ka kopo latela litaelo tse ka tlase ho fokotsa matšoao ho tloha ho pepesehetse skrineng le khanya e putsoa.Leseli le Leputsoa le Tlase (Tharollo ea Hardware)
www.tuv.com

• Beha skrine ka lisenthimithara tse 20 - 28 (50 - 70 cm) hole le mahlo a hau le ka tlase ho boemo ba mahlo.
• Ho panya mahlo ka hloko nako le nako ho tla thusa ho fokotsa khatello ea mahlo ka mor'a nako e telele ea skrine.
• Nka khefu metsotso e 20 ka lihora tse ling le tse ling tse peli.
• Sheba hole le skrineng 'me u shebe ntho e hole bonyane metsotsoana e 20 nakong ea khefu.
• Etsa li-stretch ho imolla mokhathala kapa bohloko ba 'mele nakong ea khefu.
• Bulela mosebetsi oa boikhethelo oa Low Blue Light.

TÜV Rheinland Flicker Setifikeiti sa Mahala

Flicker Free
www.tuv.com

• TÜV Rheinland e lekile sehlahisoa sena ho netefatsa hore na ponts'o e hlahisa panya e bonahalang le e sa bonahaleng bakeng sa leihlo la motho mme ka hona e senya mahlo a basebelisi.
• TÜV Rheinland e hlalositse lethathamo la liteko, le fanang ka litekanyetso tse tlase maemong a fapaneng a maqhubu. Lethathamo la liteko le ipapisitse le litekanyetso kapa litekanyetso tse sebelisoang machabeng ka har'a indasteri mme le feta litlhoko tsena.
• Sehlahisoa se lekoa ka laboratoring ho latela mekhoa ena.
• Lentsoe la sehlooho "Flicker Free" le tiisa hore sesebelisoa ha se na flicker e bonahalang le e sa bonahaleng e hlalositsoeng ka mokhoa ona ka har'a sebaka sa 0 - 3000 Hz tlas'a maemo a sa tšoaneng a khanyang.
• Pontšo e ke ke ea tšehetsa Flicker Free ha Anti Motion Blur/MPRT e buletsoe. (Boteng ba Anti Motion Blur/MPRT bo fapana ho ea ka lihlahisoa.)

Litsebiso tsa Tsamaiso

Boemo ba CE
Sesebediswa sena se dumellana le ditlhoko tse behilweng ho Taelo ya Lekgotla mabapi le Kakaretso ya Melao ya Dinaha tseo e leng Ditho tse amanang le ho Kopanelana ha Motlakase (2014/30/EU), Low-vol.tage Taelo (2014/35/EU), ErP Directive (2009/125/EC) le taelo ea RoHS (2011/65/EU). Sehlahiswa sena se lekilwe mme se fumanwe se dumellana le maemo a dumellanang a Thepa ya Theknoloji ya Tlhahisoleseding e phatlaladitsweng tlasa Ditaelo tsa Official Journal of the European Union.

Setatemente sa Tšitiso ea Maqhubu a Sea-le-moea sa FCC-B
Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela Karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa, e sebelisa le ho khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela bukana ea litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ho kamohelo ea seea-le-moea kapa ea thelevishene, e ka khethoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e le 'ngoe kapa tse ngata tsa mehato e thathamisitsoeng ka tlase:

• Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
• Eketsa karohano pakeng tsa thepa le moamoheli.
• Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona.
• Ikopanye le morekisi kapa setsebi se nang le boiphihlelo sa seea-le-moea/thelevishene bakeng sa thuso.

Tlhokomeliso 1
Liphetoho kapa litokiso tse sa amoheloang ka ho hlaka ke mokha o ikarabellang bakeng sa tumellano li ka hlakola matla a mosebelisi a ho sebelisa thepa.
Tlhokomeliso 2
Lithapo tsa sehokelo tse sirelelitsoeng le thapo ea motlakase ea AC, haeba li teng, li tlameha ho sebelisoa molemong oa ho tsamaisana le meeli ea tlhahiso.
Sesebelisoa sena se lumellana le Karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:

1. Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi, le
2. Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.

MSI Computer Corp.
Lekhotla la 901 Canada, City of Industry, CA 91748, USA
626-913-0828
www.msi.com

WEEE Polelo
Tlas'a European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2012/19/EU, lihlahisoa tsa “lisebelisoa tsa motlakase le tsa elektroniki” li ke ke tsa hlola li lahloa e le litšila tsa masepala mme baetsi ba lisebelisoa tsa elektroniki tse koahetsoeng ba tla tlameha ho li nka. khutlisetsa lihlahisoa tse joalo qetellong ea bophelo ba tsona bo sebetsang.
Boitsebiso ba Lintho tsa Lik'hemik'hale
Ho latela melaoana ea lintho tsa lik'hemik'hale, joalo ka EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI e fana ka leseli la lintho tsa lik'hemik'hale lihlahisoa ho: https://csr.msi.com/global/index
Tlhaloso ea RoHS
Phatlalatso ea Boitsebiso ea Japane JIS C 0950
Tlhokahalo ea taolo ea Majapane, e hlalosoang ka tlhaloso ea JIS C 0950, e laela hore baetsi ba fane ka liphatlalatso tsa thepa bakeng sa mekhahlelo e itseng ea lihlahisoa tsa elektroniki tse rekisoang ka mor'a la 1 Phupu 2006.
https://csr.msi.com/global/Japan-JIS-C-0950-Material-Declarations
India RoHS
Sehlahiswa sena se dumellana le "India E-waste (Taolo le Tshwarelo) Rule 2016" mme e thibela tshebediso ya loto, mercury, hexavalent chromium, polybrominated biphenyls kapa polybrominated diphenyl ethers maemong a fetang 0.1 boima % le 0.01 boima ba % bakeng sa boima ba % bakeng sa cadmium litokollo tse behiloeng Shejuleng 2 ea Molao.
Tsamaiso ea Turkey EEE
E latela melaoana ea EEE ea Rephabliki ea Turkey
Ukraine Thibelo ea Lintho Tse Kotsi
Thepa e lumellana le litlhoko tsa Taolo ea Tekheniki, e amohetsoeng ke Qeto ea Kabinete ea Lekala la Ukraine ho tloha ka la 10 Hlakubele 2017, №139, mabapi le lithibelo tsa tšebeliso ea lintho tse ling tse kotsi ho lisebelisoa tsa motlakase le tsa elektroniki.
Vietnam RoHS
Ho tloha ka la 1 Tšitoe 2012, lihlahisoa tsohle tse entsoeng ke MSI li latela Circular 30/2011/TT-BCT ka nakoana e laolang meeli e lumelletsoeng bakeng sa palo ea lintho tse kotsi lihlahisoa tsa elektroniki le tsa motlakase.

Likarolo tsa Sehlahisoa sa Green

• Ho fokotseha ha tšebeliso ea matla nakong ea tšebeliso le ho ema
• Tšebeliso e fokolang ea lintho tse kotsi tikolohong le bophelo bo botle
• E qhaqha ha bonolo le ho sebelisoa hape
• Phokotso ea tšebeliso ea lisebelisoa tsa tlhaho ka ho khothaletsa ho sebelisoa hape
• E atolosoa bophelo ba sehlahisoa ka ho ntlafatsa habonolo
• Ho fokotsa tlhahiso ea litšila tse tiileng ka leano la ho khutlisa

Leano la Tikoloho

• Sehlahisoa se etselitsoe ho thusa ho sebelisoa hape ka nepo ha likarolo le ho sebelisoa hape 'me ha sea lokela ho lahleloa qetellong ea bophelo ba sona.
• Basebelisi ba lokela ho ikopanya le sebaka se lumelletsoeng sa pokello ea lehae bakeng sa ho sebelisoa hape le ho lahla lihlahisoa tsa bona tsa ho qetela.
• Etela MSI websebaka le ho batla morekisi ea haufi bakeng sa tlhaiso-leseling e batsi ea ho e sebelisa hape.
• Basebelisi le bona ba ka re fihlela ho gpcontdev@msi.com bakeng sa tlhahisoleseling mabapi le ho lahloa ho nepahetseng, ho khutlisa, ho khutlisa, le ho qhaqhoa ha lihlahisoa tsa MSI.

Tlhokomeliso!
Tšebeliso e feteletseng ea li-skrini e ka 'na ea ama mahlo.
Likhothaletso:

1. Nka khefu ea metsotso e 10 bakeng sa metsotso e meng le e meng e 30 ea nako ea skrine.
2. Bana ba ka tlase ho lilemo tse 2 ha baa lokela ho ba le nako ea skrine. Bakeng sa bana ba lilemo tse 2 ho ea holimo, nako ea skrine e lokela ho lekanyetsoa ka tlase ho hora e le 'ngoe ka letsatsi.

Tsebiso ea Tokelo ea Tokelo le Matshwao a Khoebo

Copyright © Micro-Star Int'l Co., Ltd. Litokelo tsohle li sirelelitsoe. Letšoao la MSI le sebelisitsoeng ke lets'oao le ngolisitsoeng la Micro-Star Int'l Co., Ltd. Matshwao a mang kaofela le mabitso a boletsoeng e kanna ea ba matšoao a beng ba ona. Ha ho na tiisetso mabapi le ho nepahala kapa botlalo e hlahisoang kapa ho boleloa. MSI e na le tokelo ea ho etsa liphetoho tokomaneng ena ntle le tsebiso pele.
Mantsoe a HDMI™, HDMI™ High-Definition Multimedia Interface, HDMI™ Trade dress le HDMI™ Logos ke matshwao a kgwebo kapa matshwao a kgwebo a ngodisitsweng a HDMI™ Licensing Administrator, Inc.
Tšehetso ea tekheniki
Haeba bothata bo hlaha ka sehlahisoa sa hau 'me ho se tharollo e ka fumanoang bukeng ea mosebelisi, ka kopo ikopanye le sebaka sa hau sa theko kapa morekisi oa lehae. Ntle le moo, etela https://www.msi.com/support/ bakeng sa tataiso e eketsehileng.

Litokomane / Lisebelisoa

msi MPG 491CQP MPG Series OLED Monitor [pdf] Bukana ea Mosebelisi MPG 491CQP MPG Series OLED Monitor, MPG 491CQP, MPG Series OLED Monitor, Series OLED Monitor, OLED Monitor, Monitor

Litšupiso

• Bukana ea Mosebelisi