miniDSP V2 IR Remote Control
TLHALOSO
Hona joale theko e 'ngoe le e' ngoe e ncha ea miniDSP SHD, Flex, kapa 2×4 HD e tla le IR remote control. Remoutu ena ea IR e lokiselitsoe esale pele hore e sebetse le lihlahisoa tsa miniDSP, kahoo ha ho na lebaka la ho latela mokhoa oa ho ithuta ho e sebelisa. E na le firmware ea morao-rao e kentsoeng 'me e lokiselitsoe ts'ebetso ea plug-and-play. – miniDSP 2x4HD – SHD Series – DDRC-24/nanoSHARC kit – DDRC88/DDRC22 series/(FW 2.23) – OpenDRC series (letoto kaofela) – CDSP 8×12/CDSP 8x12DL – miniDSP 2×8/8×8/4x10HD/ 10x10HD - nanoDIGI 2 × 8 / nanoDIGI 2 × 8 kit - miniSHARC kit (FW 2.23) Ke habohlokoa ho ela hloko hore likonopo tsa Play / Pause / Next / E fetileng li fumaneha feela bakeng sa ho sebelisoa le letoto la SHD.
LIEKETSENG TS'OANELO
- Lebitso: MiniDSP
- Sebopeho se Ikhethileng: Ergonomic
- Boholo ba Nomoro ea Lisebelisoa tse Tšehetsoeng: 1
- Theknoloji ea Khokahano: Infrared
- Boholo ba Sehlahisoa: 5 x 2 x 1 lisenthimithara
- Boima ba Ntho: 1.41 lik'hilograma
- Nomoro ea mohlala oa ntho: Hole V2
- Libetri: 1 Libetri tsa Lithium Ion lia hlokahala. (kenyelleditswe)
NTHO E LEKOSI
- Remote Control
- Bukana ea Mosebelisi
MESEBETSI
- Tlosa/Tima: Bulela/tima sesebelisoa sa miniDSP.
- Phahamisa holimo/tlase: Phatlalatso ea molumo oa molumo.
- Ho khetha ho kenya: E fetola lisebelisoa kapa li-setting.
- Khetho ea Sephetho: Khetha pakeng tsa melumo ea stereo le e potolohileng haeba ho hlokahala.
- Khutsa: E emisa molumo.
- Khetho ea Mohloli: E fetola mehloli ea HDMI, ea optical le ea analog.
- Metsu ea ho Tsamaisa: Tsamaisa limmapa tsa miniDSP le likhetho.
- OK/Kena: E netefatsa litlhophiso kapa likhetho tsa menyetla.
- Khutlela/Tsoa: E khutlisa kapa e tlohela lenane la hajoale.
- Khetha esale pele: Likonopo tsena li hopola li-presets haeba miniDSP e li tšehetsa.
- Filter/EQ Controls: Likonopo tsena li laola teka-tekano e hahelletsoeng ea miniDSP le ho sefa.
- Khetho ea mokhoa: Fetola mekhoa (stereo, pota-pota, bypass).
- Letlapa la Nomoro: Li-remoutu tse ling li na le li-keypad tsa linomoro bakeng sa ho seta kapa ho seta linomoro esale pele.
LIKAROLOANA
Lenane le latelang ke lethathamo la litšobotsi tseo hangata li leng teng taolong ea hole bakeng sa miniDSP:
- Ho fetola Matla:
Konopo e lumellang mosebelisi ho bulela le ho tima sesebelisoa sa miniDSP hangata e kenyelelitsoe hole. - Taolo ea Bolumo:
Ho na le lisebelisoa tse ngata tsa miniDSP ampli-lifiers tse hahiloeng ho tsona ka kotloloho kapa li etselitsoe ho sebetsa mmoho le kantle amplifiers. Ho na le monyetla oa hore remote e be le likonopo bakeng sa ho laola molumo oa tlhahiso. - Ho Khetha Seo U se Kentseng:
Haeba sesebediswa sa miniDSP se tshehetsa mefuta e mengata ya dikenyo tse fapaneng—bakeng sa mohlalaample, analog, digital, kapa USB-remoutu e ka ba le likonopo tse u lumellang ho khetha mohloli ofe kapa ofe oa ho kenya oo u batlang ho o sebelisa. - Khetho ea Sephetho:
Ho ka etsahala hore remoutu e fane ka khetho ea ho khetha liteishene tse itseng tsa tlhahiso kapa libaka, tse bohlokoa bakeng sa litlhophiso tsa libaka tse ngata le lisebelisoa tse nang le liphetho tse fapaneng. - Taolo ea mosebetsi oa DSP:
Ho ka etsahala hore sebaka se hole se fane ka taolo ea ts'ebetso ea ts'ebetso ea mats'oao a dijithale joalo ka liphetoho tsa EQ, litlhophiso tsa crossover, le ho tsamaisana ha nako. Sena se tla itšetleha ka mohlala oa miniDSP le bokhoni ba sesebelisoa. - Ho fetola li-Presets:
Haeba mochini oa miniDSP o fana ka litlhophiso tse seng li setiloe, taolo e hole e ka ba le likonopo tse u lumellang hore u tsamaee har'a li-presets tse fumanehang. - Khutsa 'me u le mong:
Likonopo tse ka sebelisoang ho khutsufatsa kapa ho hlahisa liphetho kapa likanale u le mong. - Litaolo tsa Sisteme ea ho Tsamaisa:
Pontšong ea miniDSP, ka tloaelo motho o tla fumana likonopo tsa ho sesa (joalo ka metsu) hammoho le konopo ea "OK" e ka sebelisoang ho tšela menyetla le ho khetha likhetho. - Letlapa la Linomoro:
Maemong a mang, konopo ea linomoro e ka ba teng ho thusa ho kenya letsoho ka kotloloho ho li-setting tse itseng kapa li-presets. - Likonopo tsa Menu le Setupo:
molemong oa ho fihlella le ho laola menyetla le litlhophiso tsa miniDSP. - Bokhoni ba ho Ithuta:
Li-remoutu tse ling tsa miniDSP li na le bokhoni ba ho "ithuta" litaelo ho tsoa ho tse ling tse hole, ho li fa bokhoni ba ho laola likarolo tse ngata tsa sistimi.
MEHATO YA TLHOKOMELO
- Ho ba le Direct View:
Litaolo tse hole tsa infrared (IR) li hloka hore mola o otlolohileng oa pono o bolokoe lipakeng tsa remote le sensor ea IR ea sesebelisoa se laoloang. Ho etsa bonnete ba hore yuniti ea remote le miniDSP li khona ho buisana ka botšepehi, tlosa litšitiso leha e le life tse ka bang tseleng ea tsona. - Sebaka:
Hlahloba ho bona hore na u sebelisa remote control ho tsoa ka har'a mefuta e khothalletsoang hore e sebelisoe. Sebaka sena hangata se tloha ho limithara tse 5 ho isa ho tse 10, le hoja se ka nyolohela ho limithara tse 20 maemong a mang. - Tlhokomelo ea Battery:
Ho bohlokoa ho hlahloba libeteri tsa remote control nako le nako le ho li fetola ha ho hlokahala. Maemo a tlase a betri a ka baka boitšoaro bo sa lebelloang hammoho le phokotso ea mefuta. - Qoba ho Iponahatsa ka Metsi:
Ho sireletsa likarolo tse ka hare tsa taolo e hole hore li se ke tsa tsoa kotsi, u lokela ho li boloka hole le metsi le mongobo. - Lula hole le Lithempereichara tse Chesang:
Likarolo tsa remote control li ka senyeha habonolo haeba li le tlas'a mocheso o phahameng. Ha ea lokela ho pepesetsoa letsatsing le tobileng, lihitara kapa mehloli leha e le efe e meng ea mocheso. - Ela Litlhokomelo tse Eketsehileng:
Le hoja li-remote control li na le boemo bo phahameng ba nako e telele, u ntse u lokela ho hlokomela hore u se ke ua li tlohela kapa ua li tšoara hampe. - Polokelo e Nepahetseng:
Ha e sa sebelisoe, remote control e lokela ho behoa sebakeng se pholileng, se omileng le se nang le moriti ka lebaka la khanya ea letsatsi le mongobo. - Tšebelisano lipakeng tsa Remote le Sesebediswa:
Netefatsa hore sesebediswa sa miniDSP seo o se sebedisang se ka hokahana le remoutu ka ho sheba diseting tsa sona tsa ho sebetsa. Haeba u sebelisa remoutu e fosahetseng, ho ka etsahala hore sesebelisoa se se sebetse kapa u fumane liphetho tse sa lebelloang. - Ela hole le tšitiso ea lebone le otlolohileng la infrared:
Ho molemo ho qoba ho tsamaisa li-remoutu tsa lisebelisoa tse ling tsa elektroniki, joalo ka thelevishene kapa sebapali sa DVD, ka kotloloho setsing sa miniDSP. Ho etsa joalo ho ka etsa hore sesebelisoa se sebetse hantle. - Ho hloekisa:
Haeba ho hlokahala, hlakola bokaholimo ba remote ho theosa ka lesela le omeletseng le se nang letlapa. Ho bohlokoa ho qoba ho sebelisa lik'hemik'hale leha e le life tse bohale kapa lihlapolli tse ka senyang sesebelisoa. - Lintlafatso ho Firmware:
Haeba sesebelisoa sa remote kapa sesebelisoa sa miniDSP se nolofalletsa ntlafatso ea firmware, hlahloba ho bona hore na u na le phetolelo ea morao-rao e kentsoeng e le hore u ka nka nako e itseng.tage ea lintlafatso life kapa life tse ka bang teng kapa tokiso ea liphoso.
LIPOTSO TSE BOTSOANG HANGATA
MiniDSP V2 IR Remote Control ke eng?
MiniDSP V2 IR Remote Control ke remoutu e ts'oaroang ka letsoho e etselitsoeng ho laola lisebelisoa tsa miniDSP le mesebetsi ea tsona.
MiniDSP V2 IR Remote Control e hokela jwang ho sesebediswa sa miniDSP?
Remoutu e sebelisa theknoloji ea infrared (IR) ho buisana le sesebelisoa sa miniDSP.
Ke lisebelisoa life tsa miniDSP tse tsamaisanang le V2 IR Remote Control?
V2 IR Remote Control e tsamaisana le lihlahisoa tse fapaneng tsa miniDSP, ho kenyeletsoa miniDSP 2x4 HD, miniDSP 2x4 HD Kit, le miniDSP 2x4 Balanced.
Mesebetsi ea mantlha ea miniDSP V2 IR Remote Control ke efe?
Remoutu e o dumella ho lokisa modumo, kgetho ya ho kenya, ho hopola esale pele, le diparamente tse ding ho sesebediswa sa miniDSP.
U fetola molumo joang ka V2 IR Remote Control?
Tobetsa likonopo tsa ho nyolla holimo (+) kapa ho theola (-) ho remoutu ho fetola bophahamo ba molumo.
Na miniDSP V2 IR Remote Control e ka fetoha lipakeng tsa lintho tse kenang tse fapaneng sesebelisoa sa miniDSP?
E, hangata e na le likonopo ho khetha mehloli e fapaneng ea ho kenya.
Ke li-presets tse kae tseo V2 IR Remote Control e ka bolokang le ho li hopola?
Palo ea li-presets e ipapisitse le mofuta o ikhethileng oa sesebelisoa sa miniDSP. Mefuta e meng e tšehetsa li-presets tse ngata, ha tse ling li ka ba le nomoro e tsitsitseng.
Na miniDSP V2 IR Remote Control e hloka libeteri?
Ee, remoutu e sebetsa ka betri, 'me hangata libeteri li kenyeletsoa ha u rekoa.
MiniDSP V2 IR Remote Control e sebelisa mofuta ofe oa libeteri?
Remoutu e atisa ho sebelisa libeteri tsa AAA.
Na V2 IR Remote Control e ka hlophisoa hore e sebetse ka lisebelisoa tse ling?
Remoutu e etselitsoe lihlahisoa tsa miniDSP ka ho khetheha, 'me e kanna ea se ke ea lokisetsoa lisebelisoa tse ling.
Na ho na le tlhoko ea mohala oa pono ha u sebelisa V2 IR Remote Control?
Ee, joalo ka li-remote tse ngata tsa IR, V2 IR Remote Control e hloka mola o hlakileng oa pono lipakeng tsa remote le sesebelisoa sa miniDSP bakeng sa ts'ebetso e nepahetseng.
Na V2 IR Remote Control e ka sebetsa le lisebelisoa tse ling tsa miniDSP, joalo ka moamoheli oa miniDSP IR?
V2 IR Remote Control e etselitsoe ho sebetsa ka kotloloho le lisebelisoa tsa miniDSP, 'me e kanna ea se tsamaellane le lisebelisoa tsa miniDSP joalo ka moamoheli oa IR.
Na ho na le mefokolo ho mofuta oa Taolo ea Remote ea V2 IR?
Mefuta e fapaneng ea remote ka kakaretso e ka har'a limithara tse 'maloa, ho itšetlehile ka maemo a tikoloho.
Na miniDSP V2 IR Remote Control e khantšitse morao?
Liphetolelo tse ling tsa remoutu li ka ba le tšobotsi ea backlight bakeng sa ponahalo e ntle maemong a khanya e tlase.
Na V2 IR Remote Control e ka sebelisoa ho fihlella litlhophiso tse tsoetseng pele sesebelisoa sa miniDSP?
Remoutu e fana ka phihlello ea lits'ebetso tsa mantlha le li-presets. Bakeng sa li-setting tse tsoetseng pele, u kanna ua hloka ho sebelisa mekhoa e meng ea taolo joalo ka sebopeho sa khomphutha.