Met One Instruments GT-324-9800 Handheld Particle Counter
Litlhaloso
- MohlalaTlhaloso: GT-324
- MoetsiTlhaloso: Met One Instruments, Inc
- Aterese: 1600 NW Washington Blvd. Grants Pass, KAPA 97526, USA
- Ikopanye: Mohala +1 541-471-7111, Fax +1 541-471-7116
- Email: service@metone.com
- CE Pakiloeng
| Sebopeho | Tlhaloso |
|---|---|
| Boholo Range | 0.3 ho isa ho 10.0 microns |
| Bala Likanale | Likanale tse 4 tse behiloeng esale pele ho 0.3, 0.5, 5.0, le 10.0 µm |
| Likhetho tsa boholo | 0.3, 0.5, 0.7, 1.0, 2.5, 5.0, le 10.0 µm |
| Ho nepahala | ± 10% ho latela maemo a ka lateloang |
| Moeli oa Boiketlo | 3,000,000 likaroloana/ft³ |
| Mocheso | ±3 °C |
| Mongobo o Batlang | ±5% |
| Sekhahla sa Phallo | 0.1 CFM (2.83 L/mots) |
| Sampling Mokhoa | E le 'ngoe kapa e Tsoelang Pele |
| SampLing Nako | 3 - 60 metsotsoana |
| Polokelo ea Boitsebiso | 2200 lirekoto |
| Pontšo | 2-line ka LCD ea litlhaku tse 16 |
| Keyboard | 2-konopo e nang le daela ea rotary |
| Lipontšo tsa Boemo | Betri e Tlase, Tekanyetso, NIST, ISO |
| Mokhoa oa ho lekanya | Khanya e hasana |
| Mohloli oa Leseli | Laser Diode, 35 mW, 780 nm |
| Motlakase | |
| Adapter ea AC / Charger | Mojule oa AC ho ea ho DC, 100 - 240 VAC ho isa ho 8.4 VDC |
| Mofuta oa Leshala | Betri e nchafalitsoeng ea Li-ion |
| Nako ea Ts'ebetso ea Betri | Tšebeliso e tsoelang pele ea lihora tse 8 |
| Nako ea ho Nchafatsa Battery | Lihora tse 2.5 tse tloaelehileng |
| Puisano | Mofuta oa USB Mini B |
| Litekanyo tsa 'Mele | |
| Bophahamo | 6.25" (15.9cm) |
| Bophara | 3.65" (9.3cm) |
| Botenya | 2.00" (5.1cm) |
| Boima ba 'mele | 1.6 lbs (0.73 lik'hilograma) |
| Maemo a Tikoloho | |
| Mocheso oa ho sebetsa | 0 ° C ho ea +50 ° C |
| Mongobo | 0 - 90%, e sa fokotseng |
| Mocheso oa polokelo | -20° C ho ea ho +60° C |
Litaelo tsa Tšebeliso ea Sehlahisoa
- Selelekela
Fana ka ho fetaview ya sehlahiswa le morero wa sona. - Tlhophiso
Litaelo tsa mokhoa oa ho seta sehlahisoa bakeng sa tšebeliso ea lekhetlo la pele. - Mosebelisi
Tlhaloso ea sebopeho sa mosebelisi le mokhoa oa ho tsamaea ho eona. - Tshebetso
Mehato e qaqileng ea mokhoa oa ho sebetsa sehlahisoa, ho kenyelletsa le ho matlafatsa, sample pontsho ya skrine, le sampling.- Matlafatsa
Tataiso ea mohato ka mohato mabapi le mokhoa oa ho matlafatsa sesebelisoa. - SampLe Screen
Boitsebiso ka seo sample li-skrini le mokhoa oa ho li hlalosa. - Sampling
Litaelo tsa mokhoa oa ho etsa sampling ka ho sebedisa sehlahiswa.
- Matlafatsa
- Menu ea Litlhophiso
Tlhaloso ea menu ea li-setting, ho kenyeletsa viewho kenya le ho hlophisa li-setting.- View Litlhophiso
Mokhoa oa ho view li-setting tsa hajoale sesebelisoa. - Fetola Litlhophiso
Litaelo tsa mokhoa oa ho hlophisa le ho etsa litlhophiso ho latela likhetho tsa mosebelisi.
- View Litlhophiso
- Lipuisano tsa Seriana
Lintlha tse mabapi le mokhoa oa ho theha likhokahano tsa serial le sehlahisoa. - Tlhokomelo
Tataiso mabapi le ho boloka sehlahisoa, ho kenyeletsoa ho tjhaja betri, lenane la litšebeletso, le lintlafatso tsa flash.- Ho tjhaja Betri
Litaelo tsa mohato ka mohato mabapi le mokhoa oa ho tjhaja betri ea sesebelisoa. - Kemiso ea Tšebeletso
Litlhahiso mabapi le nako le mokhoa oa ho sebeletsa sehlahisoa. - Ntlafatso ea Flash
Mokhoa oa ho etsa ntlafatso ea flash sesebelisoa.
- Ho tjhaja Betri
Selelekela
- GT-324 ke k'haonta e nyane e bobebe e bobebe e nang le likanale tse nne e ts'oaroang ka letsoho. Lintlha tsa bohlokoa li kenyelletsa:
- Sehokelo se bonolo sa mosebelisi se nang le dial tse ngata tsa rotary (tsebisa 'me u tobetse)
- Lihora tse 8 tsa ts'ebetso e tsoelang pele
- 4 bala likanale. Likanale tsohle li ka khethoa ke 1 ho tse 7 tsa boholo tse seng li setiloe: (0.3μm, 0.5μm, 0.7μm, 1.0μm, 2.5μm, 5.0μm le 10μm)
- Mekhoa ea ho tsepamisa maikutlo le ho bala kakaretso
- Mocheso o kopantsoeng ka botlalo / sensor ea mongobo e amanang
- Tšireletso ea password bakeng sa litlhophiso tsa basebelisi
Tlhophiso
Likarolo tse latelang li akaretsa ho phutholla, moralo le ho etsa tlhahlobo ea tlhahlobo ho netefatsa ts'ebetso.
Ho phutha
Ha o bula GT-324 le lisebelisoa, hlahloba lebokose bakeng sa tšenyo e totobetseng. Haeba lebokose le senyehile tsebisa mopalami. Hlakola ntho e 'ngoe le e' ngoe 'me u etse tlhahlobo ea pono ea litaba tse ka hare. Lintho tse tloaelehileng (tse kenyellelitsoeng) li bontšoa ho
- Setšoantšo sa 1 Lisebelisoa tse tloaelehileng. Lisebelisoa tsa boikhethelo li bonts'oa ho
- Setšoantšo sa 2 Lisebelisoa tsa boikhethelo.
HLOKOMELA:
Mokhanni oa Silicon Labs CP210x bakeng sa khokahano ea USB o tlameha ho kengoa pele o hokela boema-kepe ba USB ba GT-324 komporong ea hau. Haeba mokhanni enoa a sa kengoa pele, Windows e ka kenya li-driver tsa generic tse sa tsamaisaneng le sehlahisoa sena. Sheba karolo ea 6.1.
Khoasolla mokhanni websehokelo: https://metone.com/usb-drivers/
Lisebelisoa tse tloaelehileng tsa GT-324
Lisebelisoa tsa boikhethelo tsa GT-324
Sebopeho
Setšoantšo se latelang se bontša sebopeho sa GT-324 mme se fana ka tlhaloso ea likarolo.
| Karolo | Tlhaloso |
| Pontšo | Pontšo ea 2X16 ea LCD |
| Keyboard | 2 likonopo tsa lera la senotlolo |
| Mohala oa rotary | Ho daela ka bongata (tsebisa le ho tobetsa) |
| Jack Charger | Kopo ea ho kenya bakeng sa tjhaja ea kantle ea betri. Jack ena e tjhaja libeteri tse ka hare 'me e fana ka matla a sa khaotseng a ho sebetsa bakeng sa yuniti. |
| Phallo Fetola | E fetola samplebelo la phallo |
| Nozzle e kenang | Sample nozzle |
| Boema-kepe ba USB | Kou ea puisano ea USB |
| Sensor ea Temp/RH | Sensor e kopaneng e lekanyang mocheso le mongobo o lekanyelitsoeng. |
Litlhophiso tsa kamehla
GT-324 e tla le litlhophiso tsa mosebelisi tse hlophisitsoeng ka tsela e latelang.
| Paramethara | Boleng |
| Boholo | 0.3, 0.5, 5.0, 10 limilimithara |
| Mocheso | C |
| Sample Sebaka | 1 |
| Sample Mode | Bukana |
| Sample Nako | 60 metsotsoana |
| Bala Diyuniti | CF |
Ts'ebetso ea pele
Betri e lokela ho tjhaja lihora tse 2.5 pele e sebelisoa. Sheba Karolo ea 7.1 ea bukana ena bakeng sa tlhaiso-leseling ea ho tjhaja betri. Tlatsa mehato e latelang ho netefatsa ts'ebetso e nepahetseng.
- Tobetsa konopo ea Power bakeng sa metsotsoana e 0.5 kapa ho feta ho bulela matla.
- Shebella skrine ea ho qala ka metsotsoana e 3 ebe Sample skrine (Karolo ea 4.2)
- Tobetsa konopo ea Qala / Emisa. GT-324 e tla sample bakeng sa motsotso o le 1 ebe u emisa.
- Sheba lipalo tse hlahang skrineng
- Fetola konopo ea Khetha ho daela ho view boholo bo bong
- Yuniti e se e loketse ho sebelisoa
Mosebelisi
Sehokelo sa mosebelisi sa GT-324 se entsoe ka daela ea rotary, likonopo tse 2 le ponts'o ea LCD. Letlapa la likonopo le daela ea rotary li hlalositsoe tafoleng e latelang.
| Taolo | Tlhaloso | |
| Senotlolo sa Matla | Matlafatsa kapa ho tima yuniti. Ho bula matla, tobetsa metsotsoana e 0.5 kapa ho feta. | |
|
Qala / Emisa Senotlolo |
SampLe Screen | QALA / Emisa joalo kaample ketsahalo |
| Menu ea Litlhophiso | Khutlela ho Sample skrine | |
| Fetola Litlhophiso | Hlakola mokhoa oa ho fetola 'me u khutlele ho Menu ea Litlhophiso | |
| Kgetha Daela | Fetolela ho daela ho tsamaisetsa likhethong kapa ho fetola boleng. Tobetsa ho daela ho khetha ntho kapa boleng. | |
Tshebetso
Likarolo tse latelang li akaretsa ts'ebetso ea mantlha ea GT-324.
- Matlafatsa
Tobetsa konopo ea Power ho matlafatsa GT-324. Sesepa sa pele se bontšitsoeng ke Skrine ea ho Qala (Setšoantšo sa 4). The Startup Screen e bonts'a mofuta oa sehlahisoa le k'hamphani websebaka sa sebaka sa marang-rang hoo e ka bang metsotsoana e 3 pele o kenya Sample Screen.
- Motlakase oa Auto Off
GT-324 e tla tima kamora metsotso e 5 ho boloka matla a betri ha yuniti e emisoa (e sa baloe) 'me ha ho na ts'ebetso ea keyboard kapa likhokahano tsa serial.
- Motlakase oa Auto Off
- SampLe Screen
SampLe Screen e bonts'a boholo, lipalo, likarolo tsa palo, le nako e setseng. Nako e setseng e bontshwa nakong ya kample liketsahalo. The Sample Screen e bontšitsoe Figure 5 mona ka tlase.
Channel 1 (0.3μ) e hlahisoa ho Sample Screen Line 1. Potoloha ea Kgetha daela ho hlahisa dikanale 2-4, boemo ba betri, mocheso o lekanyeditsweng, le mongobo o lekanyeditsweng moleng wa 2 (setshwantsho sa 6).
- Litemoso / Liphoso
- GT-324 e na le tlhahlobo ea kahare ea ho beha leihlo mesebetsi ea bohlokoa joalo ka betri e tlase, lerata la sistimi le ho hloleha ha enjine ea optical. Litemoso/liphoso li hlahisoa ho Sample Screen Line 2. Ha sena se etsahala, feela potoloha le Khetha daela ho view boholo bofe kapa bofe moleng o ka holimo.
- Temoso ea betri e tlase e etsahala ha ho na le metsotso e ka bang 15 ea metsotsoanaampling setseng pele yuniti e emisa sampling. Boemo ba betri bo tlase bo bontšoa setšoantšong sa 7 ka tlase.
Lerata le feteletseng la tsamaiso le ka fella ka lipalo tse fosahetseng le ho fokotsa ho nepahala. GT-324 e hlokomela lerata la sistimi ka bo eona mme e bonts'a temoso ha boemo ba lerata bo le holimo. Lebaka le ka sehloohong la boemo bona ke tšilafalo ka mochine oa optical. Setšoantšo sa 7 se bontša Sample skrine e nang le temoso ea Lerata la Tsamaiso.
- Phoso ea sensor e tlalehoa ha GT-324 e lemoha ho hloleha ho sensor ea optical. Setšoantšo sa 9 se bontša phoso ea kutlo.
- Litemoso / Liphoso
- Sampling
Likaroloana tse latelang li akaretsa sample mesebetsi e amanang.- Qaleho / Ho emisa
Tobetsa konopo ea QALA/EMA ho qala kapa ho emisa joalo kaample ho tsoa ho Sample Screen. Ho itšetlehile ka sample mode, yuniti e tla tsamaisa s e le 'ngoeample kapa e tsoelang pele samples. Sample mekhoa e tšohloa Karolong ea 4.3.2. - Sample Mode
Likarolo tsa sample mode e laola s e le 'ngoe kapa e tsoelang peleampling. Setlhophiso sa Manual se hlophisa yuniti bakeng sa s e le 'ngoeample. The Continuous setting configure unit for nonstop sampling. - Bala Diyuniti
GT-324 e ts'ehetsa lipalo tse felletseng (TC), likaroloana ka leoto la cubic (CF), likaroloana ho cubic meter (M3) le likaroloana ka litara (/L). Maemo a ho tsepamisa maikutlo (CF, /L, M3) a itšetlehile ka nako. Litekanyetso tsena li ka fetoha qalong ea sample; leha ho le joalo, ka mor'a metsotsoana e 'maloa tekanyo e tla tsitsa. Nako e telele sampLes (mohlala, metsotsoana e 60) e tla ntlafatsa ho nepahala ha tekanyo ea mahloriso. - Sample Nako
Sampnako e etsa qeto ea sample nako. Sampnako e ka beoa ho tloha metsotsoana e 3 ho isa ho e 60 mme e tšohloa ho Sample Nako ka tlase. - Tšoara Nako
Nako ea ho ts'oara e sebelisoa ha SampLes e behiloe bakeng sa metsotso e fetang e le 'ngoeample. Nako ea ho ts'oara e emela nako ho tloha pheletsong ea setsample ho qala sample. Nako ea ho ts'oara e ka sebelisoa ho tloha metsotsoana e 0 - 9999. - Sample Nako
Lipalo tse latelang li bontša sample tatellano ea nako bakeng sa bobeli bukana le e tsoelang pele sampling. Setšoantšo sa 10 se bontša nako ea sample mode. Setšoantšo sa 11 se bontša nako ea sample mode. Karolo ea Qala e kenyelletsa nako ea 3 ea bobeli ea ho hloekisa.
- Qaleho / Ho emisa
Sebelisa Menu ea Litlhophiso ho view kapa fetola likhetho tsa tlhophiso.
View Litlhophiso
Tobetsa ho Khetha ho daela ho ea ho Menu ea Litlhophiso. Fetola konopo ea Khetha ho daela ho tsamaisetsa li-setting tse tafoleng e latelang. Ho khutlela ho Sample skrineng, tobetsa Qala/Emisa kapa ema metsotsoana e 7.
Menu ea Litlhophiso e na le lintho tse latelang.
| Mosebetsi | Tlhaloso |
| SEBAKA | Fana ka nomoro e ikhethang sebakeng kapa sebaka. Range = 1 - 999 |
|
MAKHOLO |
GT-324 e na le likanale tse 'ne (4) tse lokiselitsoeng ho bala. Opereishene e ka abela e 'ngoe ea li-saese tse supileng tse seng li setiloe mocha o mong le o mong oa palo. Mefuta e tloaelehileng: 0.3, 0.5, 0.7, 1.0, 2.5, 5.0, 10. |
|
MOKHOA |
Bukana kapa e tsoelang pele. Setlhophiso sa Manual se hlophisa yuniti bakeng sa s e le 'ngoeample. The Continuous setting configure unit for nonstop sampling. |
|
LIEKETSENG MANE |
Kakaretso Count (TC), Particles / cubic leoto (CF), likaroloana / L (/ L), likaroloana / cubic meter (M3).
|
| LIEKETSENG TEMPANE | Diyuniti tsa mocheso wa Celsius (C) kapa Fahrenheit (F). |
| TS'OANELO | Hlahisa samples. |
| PUSELETSO NAKO | Boemo ba 0-9999. |
| NAKO | Nako ea ho bonts'a / kenya. Sebopeho sa nako ke HH:MM:SS (HH = Lihora, MM = Metsotso, SS = Metsotsoana). |
| LETSATSI | Hlahisa / kenya letsatsi. Sebopeho sa letsatsi ke DD/MMM/YYYY (DD = Letsatsi, MMM = Kgwedi, YYYY = Selemo) |
| KHOPOTSO MAHALA | Hlahisa palotage ea sebaka sa memori se fumanehang bakeng sa polokelo ea data. Ha Memori ea Mahala = 0%, data ea khale ka ho fetisisa e tla ngoloa ka data e ncha. |
| PASEKA | Kenya nomoro ea linomoro tse 'ne (4) ho thibela liphetoho tse sa lumelloeng ho litlhophiso tsa mosebelisi. |
| MABAPI LE | Hlahisa nomoro ea mohlala le mofuta oa firmware |
View Sample Histori
Tobetsa ho Khetha ho daela ho ea ho Menu ea Litlhophiso. Fetola daela ho Khetha ho ea ho khetho ea Histori. Latela mehato e ka tlase ho view sample histori. Ho khutlela ho Menu ea Litlhophiso, tobetsa Qala/Emisa kapa ema metsotsoana e 7.
| Tobetsa ho View
TS'OANELO |
Tobetsa Kgetha ho view histori. |
| 30/MAR/2018 L001 10:30:45
#2252 |
GT-324 e tla hlahisa rekoto ea ho qetela (Letsatsi, Nako, Sebaka, le Nomoro ea Rekoto). Fetolela ho daela ho tsamaisa rekoto. Tobetsa ho view tlaleho. |
| 0.3u 2,889 CF
0.5u 997 60 5.0u 15 60 10u 5 60 Sebaka 001 LETSATSI LA 30/MAR/2018 NAKO 10:30:45 Betri e Tlase! |
Fetolela ho daela ho tsamaisa data ea rekoto (lipalo, letsatsi, nako, lialamo). Tobetsa Qala/Emisa ho khutlela skrineng se fetileng. |
Fetola Litlhophiso
Tobetsa ho Khetha ho daela ho ea ho Menu ea Litlhophiso. Fetola daela ho Kgetha ho tsamaisetsa ho setting eo o e batlang ebe o tobetsa Kgetha daela ho edita Setting. Sekhesa se benyang se tla bontša mokhoa oa ho fetola. Ho hlakola mokhoa oa ho hlophisa le ho khutlela ho Menu ea Litlhophiso, tobetsa Qala/Emisa.
Mokhoa oa ho hlophisa oa tima ha GT-324 e le sampling (sheba ka tlase).
| Sampling…
Tobetsa Stop Key |
Skrine se hlahisoa ka metsotsoana e 3 ebe u khutlela ho Menu ea Litlhophiso |
Password Feature
Skrine se latelang se tla hlaha haeba u leka ho edita tlhophiso ha karolo ea phasewete e bulela. Yuniti e tla lula e notletsoe nako ea metsotso e 5 ka mor'a hore ho kenngoe khoutu e atlehileng ea ho notlolla phasewete.
| Tobetsa ho Enter
NTLHA #### |
Tobetsa Kgetha ho kenya mokgwa wa Edita. Khutlela ho Sample skrine haeba ho se Khetha konopo ka mor'a metsotsoana e 3 |
| Fetola ebe o Tobetsa UNLOCK 0### | Ho benya cursor ho bontsha hore Edita mode. Fetolela ho daela ho fumana boleng ba ho tsamaisa. Tobetsa ho daela ho khetha boleng bo latelang. Pheta ketso ho fihlela palo ea ho qetela. |
| Fetola ebe o Tobetsa
TLOTLELA 0001 |
Fetolela ho daela ho fumana boleng ba ho tsamaisa. Tobetsa ho daela ho tsoa Boemong ba Edita. |
| E fosahetse
Lekunutu! |
Skrine se hlahisoa ka metsotsoana e 3 haeba password e fosahetse. |
Fetola Nomoro ea Sebaka
| Tobetsa ho Fetola
SEBAKA 001 |
View skrineng. Tobetsa Kgetha ho kenya mokgwa wa Edita. |
| Fetola 'me u Tobe LOCATION 001 | Ho benya cursor ho bontsha hore Edita mode. Fetolela ho daela ho fumana boleng ba ho tsamaisa. Tobetsa ho daela ho khetha boleng bo latelang. Pheta ketso ho fihlela palo ea ho qetela. |
| Fetola ebe o Tobetsa
SEBAKA 001 |
Fetolela ho daela ho fetisa boleng. Tobetsa ho daela ho tsoa ho Mode oa Edita ebe o khutlela ho view skrineng. |
Fetola Size
| Tobetsa ho View
LIEKETSENG MAKHOLO |
Tobetsa Kgetha ho view Boholo. |
| Tobetsa ho Fetola
SIZE 1 ho tse 4 0.3m |
Boholo view skrineng. Fetola daela ho view boholo ba kanale. Tobetsa ho daela ho fetola litlhophiso. |
| Fetola ebe o Tobetsa
SIZE 1 ho tse 4 0.5m |
Ho benya cursor ho bontsha hore Edita mode. Fetolela ho daela ho tsamaisa lipalo. Tobetsa ho daela ho tsoa ho Edita mode ebe o khutlela ho view skrineng. |
Fetola S.ample Mode
| Tobetsa ho Fetola MODE
TS'ELISO TSOHLE |
View skrineng. Tobetsa Kgetha ho kenya mokgwa wa ho edita. |
| Fetola ebe o Tobetsa MODE
CTSOELA PELE |
Ho benya cursor ho bontsha hore Edita mode. Fetosa ho daela ho fetola boleng. Tobetsa ho daela ho tsoa ho Edita mode ebe o khutlela ho view skrineng. |
Edit Count Units
| Tobetsa ho Fetola COUNT UNITS
CF |
View skrineng. Tobetsa Kgetha ho kenya mokgwa wa ho edita. |
| Fetola 'me u Tobetse COUNT UNITS
CF |
Ho benya cursor ho bontsha hore Edita mode. Fetosa ho daela ho fetola boleng. Tobetsa ho daela ho tsoa ho Edita mode ebe o khutlela ho view skrineng. |
Fetola likarolo tsa Temp
| Tobetsa ho Fetola TEMP UNITS
C |
View skrineng. Tobetsa Kgetha ho kenya mokgwa wa ho edita. |
| Fetola 'me u Tobetse TEMP UNITS
C |
Ho benya cursor ho bontsha hore Edita mode. Fetosa ho daela ho fetola boleng. Tobetsa ho daela ho tsoa ho Edita mode ebe o khutlela ho view skrineng. |
Fetola S.ample Nako
| Tobetsa ho Fetola SAMPLE NAKO
60 |
View skrineng. Tobetsa Kgetha ho kenya mokgwa wa Edita. |
| Fetola 'me u tobetse SAMPLE NAKO
60 |
Ho benya cursor ho bontsha hore Edita mode. Fetolela ho daela ho fumana boleng ba ho tsamaisa. Tobetsa ho daela ho khetha boleng bo latelang. |
| Fetola 'me u tobetse SAMPLE NAKO
10 |
Fetolela ho daela ho fetisa boleng. Tobetsa ho daela ho tsoa ho Mode oa Edita ebe o khutlela ho view skrineng. |
Edit Hold Nako
| Tobetsa ho fetola HOLD TIME 0000 | View skrineng. Tobetsa Kgetha ho kenya mokgwa wa Edita. |
| Tobetsa ho fetola HOLD TIME 0000 | Ho benya cursor ho bontsha hore Edita mode. Fetolela ho daela ho fumana boleng ba ho tsamaisa. Tobetsa ho daela ho khetha boleng bo latelang. Pheta ketso ho fihlela palo ea ho qetela. |
Fetola Nako
| Tobetsa ho Fetola TIME
10:30:45 |
View skrineng. Nako ke nako ea sebele. Tobetsa Kgetha ho kenya mokgwa wa ho edita. |
| Fetola 'me u Tobetse TIME
10:30:45 |
Ho benya cursor ho bontsha hore Edita mode. Fetolela ho daela ho tsamaisa lipalo. Tobetsa ho daela ho khetha boleng bo latelang. Pheta ketso ho fihlela palo ea ho qetela. |
| Fetola 'me u Tobetse TIME
10:30:45 |
Nomoro ea ho qetela. Fetolela ho daela ho tsamaisa lipalo. Tobetsa ho daela ho tsoa ho Edita mode ebe o khutlela ho view skrineng. |
Letsatsi la Edita
| Tobetsa ho Fetola
LETSATSI LA 30/MAR/2018 |
View skrineng. Letsatsi ke nako ea sebele. Tobetsa Kgetha ho kenya mokgwa wa ho edita. |
| Fetola 'me u Tobetse DATE
30/MAR/2018 |
Ho benya cursor ho bontsha hore Edita mode. Fetolela ho daela ho tsamaisa lipalo. Tobetsa ho daela ho khetha boleng bo latelang. Pheta ketso ho fihlela palo ea ho qetela. |
| Fetola 'me u Tobetse DATE
30/MAR/2018 |
Fetolela ho daela ho tsamaisa lipalo. Tobetsa ho daela ho tsoa ho Edita mode ebe o khutlela ho view skrineng. |
Khopotso e Hlakileng
| Tobetsa ho Fetola Khopotso ea MAHALA
80% |
View skrineng. memori e teng. Tobetsa Kgetha ho kenya mokgwa wa ho edita. |
| Tobetsa o hatelle ho Hlakola Memori | Tšoara Khetha daela metsotsoana e 3 ho hlakola memori le ho khutlela ho view skrineng. Khutlela ho view skrine haeba ho se na ketso bakeng sa metsotsoana e 3 kapa nako ea ho ts'oara linotlolo e ka tlase ho metsotsoana e 3. |
Fetola Password
| Tobetsa ho Fetola PASSWORD
HA HO MOTHO |
View skrineng. #### = Lekunutu le patiloeng. Tobetsa Kgetha ho kenya mokgwa wa Edita. Kenya 0000 ho tima phasewete (0000 = NO). |
| Fetola ebe o Tobetsa PASSWORD
0000 |
Ho benya cursor ho bontsha hore Edita mode. Fetolela ho daela ho fumana boleng ba ho tsamaisa. Tobetsa ho daela ho khetha boleng bo latelang. Pheta ketso ho fihlela palo ea ho qetela. |
| Fetola ebe o Tobetsa PASSWORD
0001 |
Fetolela ho daela ho fetisa boleng. Tobetsa ho daela ho tsoa ho Mode oa Edita ebe o khutlela ho view skrineng. |
Lipuisano tsa Seriana
Lipuisano tsa serial, ntlafatso ea tšimo ea firmware le tlhahiso ea nako ea 'nete li fanoa ka boema-kepe ba USB bo ka lehlakoreng la yuniti.
- Khokahano
HLOKOMELA: Mokhanni oa Silicon Labs CP210x bakeng sa khokahano ea USB o tlameha ho kengoa pele o hokela boema-kepe ba USB ba GT-324 komporong ea hau. Khoasolla mokhanni websehokelo: https://metone.com/usb-drivers/ - Comet Software
- Software ea Comet ke sesebelisoa sa ho ntša lintlha (data, lialamo, litlhophiso, joalo-joalo).
ho tsoa lihlahisoa tsa Met One Instruments. Software e etselitsoe hore mosebelisi a fumane leseli habonolo ka har'a sehlahisoa ntle le hore a tsebe mokhoa oa motheo oa likhokahano oa sesebelisoa seo. - Software ea Comet e ka khoasolloa ho https://metone.com/software/.
- Software ea Comet ke sesebelisoa sa ho ntša lintlha (data, lialamo, litlhophiso, joalo-joalo).
- Litaelo
- GT-324 e fana ka litaelo tsa seriale bakeng sa ho fihlella data le litlhophiso tse bolokiloeng. Protocol e lumellana le mananeo a terminal a kang Comet, Putty kapa Windows HyperTerminal.
- Yuniti e khutlisa molaetsa ('*') ha e fumana ho khutla ho bontša khokahano e ntle. Tafole e latelang e thathamisa litaelo le litlhaloso tse teng.
LITS'ELISO MOLAOLI Kakaretso ea Protocol: · 38,400 Baud, 8 Data bits, No Parity, 1 Stop Bit
· Litaelo (CMD) li PHAHAMA kapa tse tlase
· Litaelo li felisitsoe ka ho khutla ha kariki
· Ho view setting = CMD
· Ho fetola tlhophiso = CMD
CMD Mofuta TLHALOSO ?, H Thusa View menu ya thuso 1 Litlhophiso View litlhophiso 2 Lintlha tsohle E khutlisa lirekoto tsohle tse fumanehang. 3 Lintlha tse ncha E khutlisa lirekoto tsohle ho tloha taelong ea ho qetela ea '2' kapa '3'. 4 Lintlha tsa ho qetela E khutlisa rekoto ea ho qetela kapa rekoto ea ho qetela ea n (n = ) D Letsatsi Fetola letsatsi. Letsatsi ke sebopeho sa MM/DD/YY T Nako Fetola nako. Sebopeho sa nako ke HH:MM:SS C Hlakola data E hlahisa molaetsa oa ho hlakola lintlha tse bolokiloeng tsa yuniti. S Qala Qala joalo kaample E QETA E qetella e leample (ho tlosa sample, ha ho na rekoto ea data) ST Sample nako View / fetola sample nako. Nako ea metsotsoana e 3-60. ID Sebaka View / fetola nomoro ya sebaka. Boemo ba 1-999. CS wxyz
Boholo ba Channel View / fetola boholo ba kanale moo w=Size1, x=Size2, y=Size3 le z=Size4. Boleng (wxyz) ke 1=0.3, 2=0.5, 3=0.7, 4=1.0, 5=2.5, 6=5.0, 7=10
SH Tšoara Nako View / fetola nako ea ho ts'oara. Boleng ke 0 - 9999 metsotsoana.
SM Sample mokgoa
View / fetola sample mode. (0=Ka letsoho, 1= Tsoela pele)
CU Bala likarolo View / fetola palo ea likarolo. Boleng ke 0=CF, 1=/L, 2=TC
OP Boemo ba Op E araba OP x, moo x e leng "S" E emisitsoe kapa "R" E sebetsa RV Khatiso View Phetolelo ea Software DT Nako ea Letsatsi View / fetola letsatsi le nako. Sebopeho = DD-MM-YY HH:MM:SS
- Sephetho sa Nako ea 'Nete
GT-324 e fana ka data ea nako ea sebele qetellong ea sample. Sebopeho sa tlhahiso ke boleng bo arohaneng ba comma (CSV). Likarolo tse latelang li bontša sebopeho. - Boleng bo Arohantsoeng ke Liphele (CSV)
Sehlooho sa CSV se kenyellelitsoe bakeng sa phetiso ea lirekoto tse ngata joalo ka Display All Data (2) kapa Display New Data (3).- Sehlooho sa CSV: Nako, Sebaka, Sample Nako, Size1, Palo1 (diyuniti), Boholo2, Palo2 (diyuniti), Size3, Palo3 (diyuniti), Size4, Palo4 (diyuniti), Thempereitjha e Ambient, RH, Boemo
- CSV Example Record: 31/AUG/2010 14:12:21, 001,060,0.3,12345,0.5,12345,5.0,12345,10,12345,22.3, 58,000<CR><LF>
Hlokomela: Boemo ba maemo: 000 = Tlwaelehileng, 016 = Betri e Tlase, 032 = Phoso ya Sensor, 048 = Betri e tlase le Phoso ya Sensor
Tlhokomelo
TLHOKOMELO: Ha ho na lisebelisoa tse ka sebelisoang ka har'a sesebelisoa sena. Likoahelo tsa sesebelisoa sena ha lia lokela ho tlosoa kapa ho buloa bakeng sa ho sebeletsa, ho lokisoa kapa morero ofe kapa ofe ntle le ke motho ea lumelletsoeng ke feme. Ho etsa joalo ho ka fella ka ho pepesehela mahlaseli a laser a sa bonahaleng a ka bakang kotsi ea mahlo.
- Ho tjhaja Betri Tlhokomeliso: Chaja ea betri e fanoeng e etselitsoe ho sebetsa ka mokhoa o sireletsehileng ka sesebelisoa sena. Se ke oa leka ho hokela tjhaja kapa adaptara e 'ngoe sesebelisoa sena. Ho etsa joalo ho ka baka tšenyo ea thepa. Ho tjhaja betri, hokela mojule wa tjhaja ya betri thapo ya matla ya AC ho sehlaha sa motlakase sa AC mme tjhaja ya DC plug ho sokete e lehlakoreng la GT-324. Chaja ea bokahohle ea betri e tla sebetsa ka mohala oa motlakase oa voltag100 ho 240 volts, ho 50/60 Hz. Letšoao la LED la tjhaja ea betri le tla ba Lefubedu ha le tjhaja le Botala ha le tjhajilwe ka botlalo. Pakete ea betri e lahliloeng e tla nka lihora tse ka bang 2.5 ho tjhaja ka botlalo. Ha ho na lebaka la ho hakolla tjhaja dipakeng tsa diseekele tsa ho tjhaja hobane tjhaja e kena mokgweng wa tokiso (chaji e fokolang) ha betri e tjhajilwe ka botlalo.
- Kemiso ea Tšebeletso
Le hoja ho se na likarolo tse ka sebelisoang ke bareki, ho na le lintho tsa tšebeletso tse netefatsang ts'ebetso e nepahetseng ea sesebelisoa. Letlapa la 1 le bonts'a kemiso ea ts'ebeletso e khothaletsoang bakeng sa GT-324.Ntho ea ho Tšebeletso Khafetsa E entsoe Ka Teko ea sekhahla sa phallo Khoeli le khoeli Tšebeletso ea bareki kapa ea feme Teko ea Zero Taba ea boikhethelo Tšebeletso ea bareki kapa ea feme Hlahloba pompo Selemo le selemo Tšebeletso ea feme feela Lekola pakete ea betri Selemo le selemo Tšebeletso ea feme feela Lekanya Sensor Selemo le selemo Tšebeletso ea feme feela - Phallo Rate Test
- Likarolo tsa sampsekhahla sa phallo ke feme e behiloeng ho 0.1cfm (2.83 lpm). Tšebeliso e tsoelang pele e ka baka liphetoho tse nyenyane tsa phallo tse ka fokotsang ho nepahala ha tekanyo. Phallo calibration Kit e fumaneha ka thoko e kenyelletsang tsohle tse hlokahalang ho lekola le ho lokisa sekhahla sa phallo.
- Ho lekola sekhahla sa phallo: tlosa phallo ea Isokinetic. Hokela tšupu e hoketsoeng ho meter ea phallo (MOI# 9801) koung ea sesebelisoa. Qala joalo kaample, 'me u hlokomele palo ea "flow meter". Sekhahla sa phallo e lokela ho ba 0.10 CFM (2.83 LPM) 5%.
- Haeba phallo e se ka har'a mamello ena, e ka lokisoa ke pitsa ea trim e ka har'a lesoba la ho kena ka lehlakoreng la yuniti. Fetolela pitsa ea ho lokisa ho ea ka tatellano ho eketsa phallo le ho fapana le oache ho fokotsa phallo.
- Teko ea Zero Count
Ho lutla ha moea kapa litšila ka har'a sensor ea likaroloana ho ka baka lipalo tse fosahetseng tse ka bakang liphoso tse kholo ha s.amplula libakeng tse hloekileng. Etsa tlhahlobo e latelang ea zero beke le beke ho netefatsa ts'ebetso e nepahetseng:- Hokela filthara ea zero ho nozzle e kenang (PN G3111).
- Lokisetsa yuniti ka tsela e latelang: Samphanyane = MANAKO, Sample Nako = metsotsoana e 60, Moqolo = Palo eohle (TC)
- Qala 'me u phethe joalo kaample.
- Boholo bo bonyenyane ka ho fetisisa bo lokela ho ba le palo <= 1.
- Tekanyetso ea Selemo le Selemo
GT-324 e lokela ho khutlisetsoa ho Met One Instruments selemo le selemo bakeng sa ho lekoa le ho hlahlojoa. Tekanyetso ea li-particle counter e hloka lisebelisoa tse khethehileng le koetliso. Setsi sa tlhahlobo sa Met One Instruments se sebelisa mekhoa e amoheloang ke indasteri joalo ka ISO.
Ntle le ho lekanya, tlhahlobo ea selemo le selemo e kenyelletsa lintho tse latelang tse thibelang ho lokisoa ho fokotsa liphoso tse neng li sa lebelloa:- Hlahloba sefe
- Hlahloba / hloekisa sensor ea optical
- Hlahloba pompo le li-tubing
- Baesekele 'me u leke betri
- Netefatsa litekanyo tsa RH le Mocheso
- Phallo Rate Test
- Ntlafatso ea Flash
Firmware e ka ntlafatsoa tšimong ka boema-kepe ba USB. Binary files le lenaneo la flash le tlameha ho fanoa ke Met One Instruments.
Ho batle phoso
TLHOKOMELO: Ha ho na lisebelisoa tse ka sebelisoang ka har'a sesebelisoa sena. Likoahelo tsa sesebelisoa sena ha lia lokela ho tlosoa kapa ho buloa bakeng sa ho sebeletsa, ho lokisoa kapa morero ofe kapa ofe ntle le ke motho ea lumelletsoeng ke feme. Ho etsa joalo ho ka fella ka ho pepesehela mahlaseli a laser a sa bonahaleng a ka lematsang mahlo.
Tafole e latelang e akaretsa matšoao a tloaelehileng a ho hloleha, lisosa le tharollo.
| Letšoao | Lebaka le ka khonehang | Khalemelo |
| Molaetsa o tlase oa betri | Betri e tlase | Hlahisa betri ka lihora tse 2.5 |
|
Molaetsa oa lerata oa sistimi |
Tšhilafatso |
1. Bulela moea o hloekileng ka har'a nozzle (khatello e tlase, u se ke oa hokela ka li-tubing)
2. Romella setsing sa litšebeletso |
| Molaetsa oa phoso oa kutlo | Ho hloleha ha kutlo | Romella setsing sa litšebeletso |
| Ha e bulele, ha ho pontsho | 1. Betri e shoeleng
2. Betri e Senyehileng |
1. Hlahisa betri lihora tse 2.5
2. Romella setsing sa litšebeletso |
| Pontšo ea bulela empa pompo ha e sebetse | 1. Betri e tlase
2. Pompo e nang le phoso |
1. Hlahisa betri lihora tse 2.5
2. Romella setsing sa litšebeletso |
| Ha ho lipalo | 1. Pompo e ile ea emisa
2. Laser diode e mpe |
1. Romella setsing sa litšebeletso
2. Romella setsing sa litšebeletso |
| Lipalo tse tlase | 1. Sekhahla sa phallo se fosahetseng
2. Calibration hoholeha |
1. Hlahloba sekhahla sa phallo
2. Romella setsing sa litšebeletso |
| Lipalo tse phahameng | 1. Sekhahla sa phallo se fosahetseng
2. Calibration hoholeha |
1. Hlahloba sekhahla sa phallo
2. Romella setsing sa litšebeletso |
| Pakete ea betri ha e lefelle tefo | 1. Pakete ea betri e sa sebetseng
2. Mojule oa tjhaja o sa sebetseng |
1. Romella setsing sa litšebeletso
2. Fetola tjhaja |
Tsebiso ea Copyright
Buka ea GT-324
© Copyright 2018 Met One Instruments, Inc. Litokelo Tsohle Li Behiloe Lefatšeng Lohle. Ha ho karolo ea sengoliloeng sena e ka hlahisoang bocha, ea fetisoa, ea ngoloa, ea bolokoa tsamaisong ea ho khutlisa, kapa ea fetoleloa puong efe kapa efe ka mokhoa ofe kapa ofe ntle le tumello e ngotsoeng e hlakileng ea Met One Instruments, Inc.
Tšehetso ea tekheniki
Haeba ts'ehetso e ntse e hlokahala ka mor'a ho buisana le litokomane tse hatisitsoeng, ikopanye le e mong oa litsebi tsa Met One Instruments, Inc. Baemeli ba Technical Service nakong ea lihora tse tloaelehileng tsa khoebo ho tloha 7:00 ho isa ho 4:00 pm Pacific Standard Time, Mantaha ho fihlela Labohlano. Boitsebiso ba tiisetso ea sehlahisoa bo fumaneha ho https://metone.com/met-one-warranty/. Ntle le moo, tlhaiso-leseling ea tekheniki le litaba tsa lits'ebeletso li atisa ho kenngoa ho rona websebaka. Ka kopo ikopanye le rona 'me u fumane nomoro ea Return Authorization (RA) pele u romela thepa efe kapa efe fekthering. Sena se re lumella ho latela le ho hlophisa mosebetsi oa litšebeletso le ho potlakisa litšebeletso tsa bareki.
Mokhoa oa puisano:
- Mohala: + 541 471 7111
- Fax: + 541 471 7115
- Web: https://metone.com
- Lengolo-tsoibila:service.moi@acoem.com
- Aterese: Met One Instruments, Inc. 1600 NW Washington Blvd Grants Pass, Oregon 97526 USA
Ka kopo, fumana nomoro ea serial ea sesebelisoa ha u ikopanya le moetsi. Mefuteng e mengata e entsoeng ke Met One Instruments, e tla beoa leiboleng ea sehlahisoa sa silevera yuniti, hape e hatisoe setifikeiting sa calibration. Nomoro ea serial e tla qala ka tlhaku ebe e lateloa ke nomoro e ikhethang ea linomoro tse hlano joalo ka U15915.
TSEBISO
TLHOKOMELISO - Tšebeliso ea litaolo kapa litokiso kapa ts'ebetso ea lits'ebetso tse ling ntle le tse boletsoeng mona li ka baka ho pepeseha ha mahlaseli a kotsi.
Class 1 LASER SEHLAHISO
E lumellana le 21 CFR 1040.10 le 1040.11 ntle le ho lumellana le IEC 60825-1 Ed. 3., joalo ka ha ho hlalositsoe ho Laser Notice No. 56, ea May 8, 2019.
- Ha ho na likarolo tse fumanehang ka har'a sekoaelo sa sesebelisoa sena.
- U se ke ua leka ho tlosa sekoahelo sa sehlahisoa sena. Ho hloleha ho latela taelo ena ho ka baka ho pepesehela mahlaseli a laser ka phoso.
- Sehlahisoa sena se netefalitsoe ke CE. Bakeng sa lintlha tse felletseng ikopanye le moetsi.
Met One Instruments, Inc
Lithekiso le Litšebeletso:
- 1600 NW Washington Blvd. Grants Pass, KAPA 97526
- Mohala 541-471-7111 Fax 541-471-7116
- www.metone.com
- service@metone.com
Litokomane / Lisebelisoa
 |
Met One Instruments GT-324-9800 Handheld Particle Counter [pdf] Buka ea Taelo GT-324-9800 Handheld Particle Counter, GT-324-9800, Handheld Particle Counter, Handheld Particle Counter |